Is it possible to execute dual open about Audition CS6?

is it possible to execute dual open about Audition CS6?
i want to use seperately audio driver.
1. Computer reference audio driver.
2. Bluetooth audio driver.
it is operation same time in My computer. I think that support this option(?) at Cool edit

It may work but you will have to try it and see. Are you on a PC or a Mac. you may be able to use two different audio devices with only one copy of Audition open. It will be easier on a Mac since you can make an aggregate device from several different audio interfaces. On a PC it will probably be harder but you may be able to do it if you use ASIO4All as your audio driver and then select the two sets of audio device from within ASIO4All's setup software.

Similar Messages

I'm using FF 3.5.18 and I do not want newer versions because : using in the Open in New Tab page opens the near tab and not as a FF 3.5.18 or is it possible to do that open in new tabs would be the end. of the new FF version

I'm using FF 3.5.18 and I do not want newer versions because : using in the Open in New Tab page opens the near tab and not as a FF 3.5.18 or is it possible to do that open in new tabs would be the end. of the new FF version

You can change a preference to make tabs open
# at the end of all open tabs
# immediately after the current tab.
See: http://kb.mozillazine.org/About:config
*Type '''about:config''' in the URL bar and press the Enter key.
*If you see the warning, accept it (promise to be careful).
*Filter = browser.tabs.insertRelatedAfterCurrent
*Look at the "Value" column ('''false'''=open at end, '''true'''=open after current tab); Value = true is the default.
*Double-click that preference to toggle the value from true to false, or false to true
*Restart Firefox (File > Restart Firefox)
See: http://www.mydigitallife.info/2010/02/01/change-firefox-to-open-new-tab-at-far-right-end-of-tabbar-disable-insert-next-to-current-active-tab/

Using Adobe Acrobat - Is it possible to execute JavaScript to report to LMS to track pdf was viewed?

Question: Using Adobe Acrobat - Is it possible to execute JavaScript to report to LMS to track pdf was viewed?
What I would like to do is to create a pdf with an Acknowledgement button that when click will report (via JavaScript) to the LMS (Learning Management System) that the end user viewed/acknowledged the pdf.
Can this be down with JavaScript in this fashion?

Thanks, (My fault, as I should have specified this.) Due to legacy reasons I need to use ie, and so I can't use the PrintPdf firefox plugin. So from reading the rest of that thread, the best method does seem to be to get hold of a copy of acrobat, and add a Print() script in each file, and open it in a new tab.
At least it gives me somethigin to try anyway :-)

Is there any possibility to see full details about the event?

ipad calendar:I have no chance to read the event location fully on my ipad. It is cut and finishes with "...", thus very important meeting number cannot be seen. Is there any possibility to see full details about the event?

Thanks for quick reply.
Looks like opened the event. Here is a screen shot, I marked the cut numbers with red cirsles.

Is it possible to execute OS level commands through Oracle APEX?

Hi,
I would like to know if it is possible to execute OS level commands, say executing any command in command prompt using Oracle APEX.
Thanks!

Welcome to Oracle Forums!
Please acquaint yourself with the FAQ and forum etiquette if you haven't already done so.
Always state
<ul>
<li>Apex Version</li>
<li>DB Version and edition</li>
<li>Web server used.I.e. EPG, OHS, ApexListner Standalone or with J2EE container</li>
<li>When asking about forms always state tabular form if it is a tabular form</li>
<li>When asking about reports always state Classic / IR</li>
<li>Always post code snippets enclosed in a pair of {code} tags as explained in FAQ</li>
</ul>
I would like to know if it is possible to execute OS level commands, say executing any command in command prompt using Oracle APEX.If by OS you are referring to the client side, then NO.
Cheers,

Is it possible to execute .bat file located in package ?

Hi,
in my application i execute a print.bat file using Runtime.exec(), i'd like to place this .bat in package, let's say com.me.testpackage. How is it possible to execute the batch file from that location?
thanks

jschell wrote:
sabre150 wrote:
jschell wrote:
>Simple 'for' loops seem to work OK but still more research needed.
There is escaping in the for loops which is necessary in a bat file and not needed at the command line.
It seem to be that any command spanning more than one line fails. Fail? The example that gave shouldn't fail. It should simply run both echos.As I understand it, the command sequence
@echo off
goto XXX
echo out
:XXX
echo last
should just output 'last' and not 'out so if it prints both 'out' and 'last' then in my view it 'fails'. Am I missing something?
>
>>
Makes me even more pleased that I work mainly with Linux.Looking up syntax - what about getopts (bourne and korn)? You can also create 'functions', which can be defined later (if I recall correctly) in the script and called multiple times. I don't know how that would work streaming it in.I don't know about consequences of the streaming approach forward definitions in 'bourne' and 'korn' though I was not aware that 'bourne' allowed them. For 'bash' where forward definitions do not seem to be allowed (could I be mistaken in this?) then using        Process process = Runtime.getRuntime().exec("bash", null, new File(System.getProperty("user.home")));the following very simple 'bash' script (which contains loops, if statements and functions but no goto or forward definitions) can be executed without problems - # Simple bash script
function sayHello {
    echo "Hello" $1
sayHello "World" ;
for i in $( ls /tmp ); do
    echo file - $i
done
for i in `seq 1 10`;
do
    echo "seq" $i
done
i=0
while [ $i -lt 6 ]; do
if [ $i -eq 4 ]; then
    echo "then" $i
else
    echo "else" $i
fi
    let i=i+1
done
i=12
until [ $i -lt 10 ]; do
echo "until" $i
let i-=1
doneIn the past, I have also published examples of how to run Perl scripts using the same basic approach. The heart of the examples is         final String perlScript = "#!/bin/perl\n" +
            "print \"PID $$\\n\";\n" +
            "print \"UID $<\\n\";\n" +
            "print \"EUID $>\\n\";\n" +
            "print \"GID $(\\n\";\n" +
            "print \"\\nProcessing the command line arguments\\n\";\n" +
            "foreach (@ARGV) {\n" +
            "    $n = factorial($_);\n" +
            "    print \"    $_! = $n\\n\";\n" +
            "}\n" +
            "print \"\\n\".'@INC'.\"\\n\";\n" +
            "foreach (@INC) {\n" +
            "    print \"    $_\\n\";\n" +
            "}\n" +
            "print \"\\n\".'%ENV'.\"\\n\";\n" +
            "foreach (keys %ENV) {\n" +
            "    print \"    $_==$ENV{$_}\\n\";\n" +
            "}\n" +
            "$x = theAnswerToTheUltimateQuestion();\n" +
            "print \"\\nThe answer to the ultimate question is ... '$x'\\n\";\n" +
            "sub theAnswerToTheUltimateQuestion()\n" +
            "{\n" +
            "    return 3*2*7;\n" +
            "}\n" +
            "sub factorial()\n" +
            "{\n" +
            "    my ($n) = @_;\n" +
            "    return ($n > 1) ? $n * factorial($n-1) : 1;\n" +
            "}\n";
        System.out.println(perlScript);
         * The perl source can be from any InputStream. Here I use a
         * ByteArrayInputStream just as a demonstration.
        final InputStream perlSource = new ByteArrayInputStream(perlScript.getBytes());
         * The '-' indicates that the Perl script comes from stdin. The "a","b","c" etc
         * are the command line arguments passed to the Perl script.
        final String[] command =
            "perl", "-", "5", "6", "7", "8", "9", "10"
        final Process process = Runtime.getRuntime().exec(command);piping the 'perlSource' stream to the process stdin.
This runs as expected on both Linux (FC9 and Ubuntu 8.04) and on Windows using Active Perl.
Please don't take my use of a String to hold the Perl script to mean that I in any way endorse this approach - I just wanted a simple means to create a self-contained example.
>
And the c shell has a goto also.One day I might find some time and investigate 'c' shell goto in this context - since I have not used csh for at least 8 years I am very rusty.
I can't say that the 'streaming' approach will work with all Linux shells but I can say that on Linux I have had no problem with Perl and Bash. If anyone needs to use the 'streaming' approach with another shell then it takes just a few minutes to setup a test harness. If any problems are found then people can always resort to the 'Plan B' approach.
I am still pleased I work mainly with Linux and Unix.

Is it possible to execute ibot..

hi all ..
is it possible to execute ibot from cmd. if so please help me the way to execute it.
thanks in advance.

Find the job ID of the IBOT( which we want to execute from command prompt) from Job Manager. Start Oracle BI scheduler from Control panel>Administrative tools>services.
open command prompt and execute IBOT by using this command.
saschinvoke -u Administratorusername/Administratorpassword -j JOBID

Why no body try to help me its possible no body has idea about how to save

why no body try to help me its possible no body has idea about how to save report updating on report builder 10g

Hello,
In order to check if the Reports executed is the one you have modified, I suggest to copy the Reports in a specific directory (/tmp on UNIX , c:\temp on Window) and execute the Reports providing the "full path name " :
report=/tmp/myreport.rdf
If you can see the modifications you have done when executing the reports like this, check if there is a REP with the same name , check if the Reports you have modified is the first with this name in the REPORTS_PATH
Regards

Possible to clear vendor open item against already posted payment document?

Hi
Can you advise if it is possible to clear an open item against already posted payment/clearing doc? Here is the background to the scenario:
An invoice was posted with transaction FB60. This was subsequently picked up in the payment run F110 and cleared by payment document number 200005678. The item went to the bank on the paymnet file and was paid out to the vendor. The transaction reference, which appeared on the incoming bank statemnet was the payment document number 200005678.
Subsequently it was discovered that the original invoice should have been posted with reference to a PO using MIRO. The requirement now is to reverse the paymnet documnet 200005678 in SAP, then reverse the document that was posted using FB60. After this the invoice will be posted using MIRO. This will create an open item on the vendor account.
This item will not be piad out again. Therefore the requirement is to try clear that open item against the previously posted payment document 200005678.
Is there any way to clear this vendor open item against the originally posted payment document 200005678?? Or any other advice on how this scenario can be handled in SAP?
Thank for your help.
Mike

Hi,
I tried that option in our test system. I ran FBRA and entered Paymnet Documnet Number (+Clearing Doc Number), Company Code, Fiscal Year.
Then chose menu option Clearing -> Reset Cleared Items.
The system pops up a window asking for a reversal reason and reversal date. I use 01 and posting date of today.
The system now posts another cleared document. That document places the invoice as an open item on the vendor account. It does not place the Payment Document as an open item on the account.
When I go to F-44 only the open vendor invoice is showing there. There is no open paymnet document.
Is there perhaps some configuration setting that stops the placement of the paymnet document as an open item when reset?
Thanks for your help again.

DB2Exception - The value of a host variable in the EXECUTE or OPEN statemen

I want to store a XML file into database.
To undersdande my problem, please see the code below:
java.sql.Connection conn = null ;
PreparedStatement ps;
// Here I'm calling a function to get Database Connection.
String sXmlFile = "" ; // This variable stores a XML file as String
String sSQL = "INSERT INTO Crs_x_xml (XML_TRAN_ID,XML_MESSAGE,SUSPENDED_FLAG ) VALUES(?,?,?)";
try {
     ps = conn.prepareStatement(sSQL);
     ps.setLong(1,1);
     ps.setBytes(2, sXmlFile.getBytes());
     ps.setString(3,"A");
     ps.executeUpdate();
     conn.close();
} catch (Exception e) {
     e.printStackTrace();
The Problem:
The table Crs_x_xml that I used has three columns, the first is a int, the second is a BLOB and third is Char(1) and its in DB2 running on AIX.
Sometimes it execute very well. But sometimes gives following error :=
COM.ibm.db2.jdbc.DB2Exception: [IBM][CLI Driver][DB2/AIX64] SQL0302N The value of a host variable in the EXECUTE or OPEN statement is too large for its corresponding use. SQLSTATE=22001
I dont know whats going wrong. Plz help....
~Abhijeet

Hi,
I am using a CMP query in websphere, in which i am trying to execute a select query.
The query is as follows:
SELECT OBJECT(o) FROM HrTmmbrAct o WHERE o.tmmbrActC IN ( 1,2,3 ) AND o.effD BETWEEN '2000-02-11' AND '2008-02-22'
The tmmbrActC is defined as a string in the Websphere CMP fields. I am not sure now to pass the value to it. Do we need to pass it as objects. pls help.
Thanks
- Giri

Is it possible to execute a transaction by calling a irpt page?

Hi,
Is it possible to execute a transaction by calling a irpt page?
If possible, is there a sample code (.irpt code) for MII 12.1?
Thanks.

You can use a SERVLET Tag in your irpt to execute an xacute query.
Here is the help file from 11.5 but this works in all the versions.
[http://help.sap.com/saphelp_xmii115/helpdata/en/Advanced_Topics/Report_Generation.htm|http://help.sap.com/saphelp_xmii115/helpdata/en/Advanced_Topics/Report_Generation.htm]

Is it possible to set an opening date for a password protected file

Is it possible to set an opening date for a password protected file!
I want to lock a folder and then have it open on a perticular date not just open with a password so that i am not tempted to open it. Is it possible?

Yes. Go to the Settings app, and select safari. There will be a section called "Autofill", and you can enable it to save your passwords and auto-fill your personal information taken from the address book. Also, iOS automatically saves all Wi-Fi passwords, so there is no need to save it manually yourself.

Possible to execute custom SQL query?

Is it possible to execute a custom SQL query and get back a collection of
objects with Kodo JDO? Query expression languages like JDOQL are all very
well (I actually think JDOQL is pretty messy), but sometimes when you've
got a complex query (and you know you're using a RDBMS) it is best
accomplished in a SQL statement. I see Kodo has extended JDOQL, which is
good, but developing custom extensions seems to be limited to implementing
kodo.jdbc.query.JDBCFilterListener where you can customise the where
clause. What I want to be able to do is to specify the entire SQL string.
I am looking into using Kodo JDO for my organisation, and being able to
use custom SQL is something i would expect (and something we can do with
our current O/R mapping product (TopLink)).
Regards,
Alex

Patrick Linskey wrote:
On Tue, 30 Sep 2003 10:57:13 +0000, Alex wrote:
being able to use custom SQL is something i would expect
We absolutely agree. Take a look at the samples/customSQL example in the
Kodo distribution.
-Patrick
Patrick Linskey
SolarMetric Inc.Hi Patrick,
I have downloaded kodo-jdo-3.0.0RC1 for windows for evaluation, but there
is no samples/customSQL directory.
Alex.

Is it possible to execute OBIEE 11g (11.1.1.5.0) Agents externally?

Hi all,
Is it possible to execute OBIEE 11g (11.1.1.5.0) Agents externally i.e. using a dabase or shell script?
I have created an agent and scheduled it to execute a dashboard. But I would like to execute this agent once dataloading is completed, not at fixed hour.
Thanks in advance.

Hi,
You can execute OBIEE 11g agents externally via ODI 11g:
"...2. Use BI EE Web Services and call ExecuteIbotNow method in the iBotService – This method will be called directly from ODI 11g..."
http://www.rittmanmead.com/2012/01/bi-ee-11-1-1-5-calling-bi-ee-11g-agents-through-oracle-data-integrator-11g/
and with command saschinvoke :
http://docs.oracle.com/cd/E12096_01/books/AnySched/AnySched_JobMgrCfg14.html
I hop those are helpful enough...
KR,
Roman

Is possible to execute the same executable vi more than 1 time (like notepad, for example)?

I have a Labview executable file that use serial ports to communicate with other devices. I need to execute the same "file.exe" more than 1 time, to control different devices simultaneously. When I double click on an executable been executed (from windows explorer), the file under execution comes to front. Is possible to execute the same file more than 1 time (like notepad, for example)?

Not the answer you are looking for I know..but still: Copying the application to another location is one possibility...if it has a different path it will execute separately.
(OR - build control of multiple devices into one and the same application... If you do not want to redesign the code to handle multiple instruments in the same VIs, you could clone the VIs within the same application...)
MTO

Is it possible to execute dual open about Audition CS6?

Similar Messages

Maybe you are looking for