Is it possible to export a single track?

I have narrated a presentation - one track per slide. Is it possible to export each track individually?
Thanks,
Brian

Brian of The Wired Schoolhouse wrote:
Is it possible to export each track individually?
solo each track

Similar Messages

How can I export a single track in Soundbooth CS5?

Greetings,
I have built up a single track in Soundbooth composed of several repeated clips. I wish to export this single track.
How can I do this in CS5 Soundbooth?
Thanks,
folsombob

Sorry nobody has answered this. I haven't been in this forum in a couple of weeks.
If you have all the tracks right where you want them, are you able to save the file as an mp3?
Are you looking to export it for web use?
For video tracking?
I'm not sure why you'd want to export it as opposed to saving in one of the many available formats.

Exporting a single track out of a multitrack project

I am very new to soundtrack pro. I have used protools in the past, but nota whole lot. Im working on this project where I have multiple audio tracks that I am editing dead space out of. I brought them into STP and did all my editing. When I go to export the project it runs the length of the longest track no matter what I do. Is there a way to simply select track 1 and export that file only. At the moment I am just copying the edited track to a new project and exporting it that way, but I assume there is a much easy way.
Thanks in advance for any suggestions.

I think the OP has tracks of different lengths, and doesn't want silence at the end (?) of the individual tracks he is exporting.
You could, however, do one of the methods above, and at the end of the last clip on the track to export, select *Set End of Project* from the Mark menu. I think that will end the clip at that point, no matter what comes after.
Hope this helps!

Best Way to Export Single Tracks in Audition

Hello,
What is the best way to export one single track (stereo or 5.1) from a multiple track mix in the Multitrack Editor if I want to make it mono? Is it by just muting the tracks I don´t want in the final mixdown and then selecting a mono Master in the Mixdown Options box?
What about exporting only a few of the tracks from a multiple track mix to one mono file? Same process?
Thanks!

"Export all Tracks as Audio Files" found under File>Export.
This will render audio files of your software instruments that start at bar 1, beat 1, and can be dragged right into Pro Tools. The export happens "pre-fader", so it is bounced at unity gain, and excludes any automation.
If there is automation that needs to be included (like a filter sweep or something like that), you'll need to solo the track, and bounce it, because a bounced file does include automation.
Also, if you're using a multi-channel instrument, you'll need to bounce those tracks separately as well.

Export a Single Software Component

Hi guys,
is it possible to Export a SINGLE Software Component from one SLD & Import it into another SLD ????
Specifically "CRM JAVA CUSTOMER PROJECT 5.0"

Since Christopher is talking about the SLD, I think he means exporting the definition of the SC in the SLD. If that's the case, I do not think it's possible, looking at the SLD UI.
Besides that a Software Component definition is actually built up of multiple CIM objects (see below), which leads to the question: "What should be exported if you want to export "a Software Component"?"
CIM Objects for a Software Component:
- The Software Component
- One or more Software Component Versions
- One or more Software Features
- The Software Component GUID
- The dependencies with other Software Component Versions

DPS Export Folio single-folio-file

hi
is it possible to export a single-folio-file to desktop?
in the beta-programm was it possible > its very useful to test the app
thx 4 help

The Product ID doesn't matter for free folios. It only matters if you'll charge money for the folio at some point. We recommend the "reverse DNS" naming approach: com.publisher.magazine.issuename, such as com.adobe.indesignweekly.2012january.
Why do you want the .zip file? That's useful only for creating Single Edition viewers.

How do i export a single video file that also contains ac3 audio

Hi Guys,
Is it possible to export a single video file that also contains ac3 5.1 surround audio?
I can create seperate audio and video files ok, but not a single file?
Please help...
Regards
Andy

You won't be able to do this with just FCPX by itself. You should be able to use Compressor to do this, or you can use Quicktime Pro to create a single .mov file from the separate video/audio files exported from FCPX.
If you use Compressor, you can save the preset and make it available inside FCPX for future use.

Is it possible to retain multiple audio tracks when exporting?

While ripping my DVD collection, I've wanted to add a purchased RiffTrax (see www.riftrax.com) to the movie as another audio track. I've been successful, but it took the following steps:
1. Encode the movie using Handbrake, open the resulting m4v file in Quicktime Pro
2. Also in Quicktime Pro, open the Rifftrax aac file I created and add it as another audio track in the m4v
3. Save the m4v as a Quicktime mov file
4. Use Handbrake again to encode the mov file into an m4v file, including my added audio track
The reason I have to do step 4 is because if I were to export an m4v file directly from Quicktime Pro, it would compress all of the audio tracks into a single audio track. It would save a lot of time if Quicktime could export multiple audio tracks, at least when exporting to formats that can handle them. Does anyone know if this is possible?
BTW, if anyone wants more details into how I create the RiffTrax aac, just ask.
- Jake

I've answered my own question, it was a lot easier than I thought. After the first encoding by Handbrake, there's really no difference between calling it a mov file or m4v file. I can change the file extension at will and there's no need to do an export that mashes the audio tracks. It's only AppleTV that needs to see the m4v file extension, Quicktime and iTunes doesn't seem to care one way or the other.
Thanks for letting me think out loud.
Jake

Is it possible to export a whole single playlist as mp3 to another disc?

Hi
I want to take a copy of one of my playlists with me on a USB stick, is it possible to copy all the tracks at once as mp3 to the stick?

Hello,
This is the relevant excerpt from Scott's Blog (I hope he won't mind):
"Simply create a Report Region with your favorite query. Add a button or link or anything which will get you to a blank page. On that page, add a PL/SQL process which will fire "On Load - Before Header" In the source of that process, use this code:
begin
-- Set the MIME type
owa_util.mime_header( 'application/octet', FALSE );
-- Set the name of the file
htp.p('Content-Disposition: attachment; filename="emp.csv"');
-- Close the HTTP Header
owa_util.http_header_close;
-- Loop through all rows in EMP
for x in (select e.ename, e.empno, d.dname
from emp e, dept d where e.deptno = d.deptno
and e.deptno like :P1_DEPTNO)
loop
-- Print out a portion of a row,
-- separated by commas and ended by a CR
htp.prn(x.ename ||','|| x.empno ||','||
x.dname || chr(13));
end loop;
-- Send an error code so that the
-- rest of the HTML does not render
htmldb_application.g_unrecoverable_error := true;
end;
You can see this in action <a href="http://www.sumnertechnologies.com/pls/htmldb/f?p=155:1">here</a> and download the export file <a href="http://www.sumnertechnologies.com/apex_exports/custom_csv.zip">here</a>."
As I wrote in my first post, you can adapt this technique to generate any CSV file you need from within APEX.
Hope this help,
Arie.

Exporting single tracks of video

what is the command for selecting to export a single video track? I want to export each track separately to send to another editor so they will have to be synched up when he gets them.
thamks

Select all the clips on the track. Press cmd and C keys. Open a new Sequence, press cmd and V keys. Export the new Sequence.
Or use the Media Manager to copy the entire project including unused media. Send them the disk with the project on it. They have your cut as a reference and the rest of the files to change as they see fit.

Exporting single tracks from a garageband project

how can i export single tracks from a garageband (6.0.5) project (and not the whole song) to be converted in aiff/wav?
thanks

Solo the track you want to export by clicking the solo (arrow)button in the Track header. Then export the song to the disk.

Exporting Single Tracks

Is there an easy way to export single tracks -- instead of the whole song -- to disk? I want to be able to take individual tracks out of a song with lots of tracks, export them to disk, and then email them to a friend for him to work with.

David Holdeman wrote:
Is there an easy way to export single tracks
solo each and export

Enhance Tuning to a Key for a Single Track

I am looking to enhance the tuning for a single track but when I go to enhance one track it enhances the tuning for all the tracks. Does anyone know of a way to just enhance the tuning for a single track? Or maybe a way to just export one track out of several?
Thanks

Well I'm just calling it what Garageband is calling it. At the top it says "Garageband, File, Edit, and then Track. Where you can add, delete, and duplicate a track. When you select "Create New Track" you then can choose from Software Instrument, Real Instrument, or Electric Guitar. I think you are thinking of a Track as a Project. When you first start Garageband the top one says _*New Project*_ and the bottom one says _*Recent Projects*_.
And I know you can move it to a New Project. I was muting all the other Tracks in a project except for the one that I wanted in a certain key and then I exported it to iTunes and then stuck it right back in as a song. So I know how to do it that way but I was wondering if there was an easier way where I didn't need to export and import tracks all the time.

Is it possible to export, and include AE compositions used within a Premiere Pro project, via project manager?

I've several Premiere Pro CC 2014 projects I want to relocate via project manager (one at a time). They're excessive in size (many long and unused footage files), so "Create New Trimmed Project" is the setting-option, within project manager, most attractive. BTW I love how project manager does this... However, when I check on its new location, I don't see any linked AfterEffects files. Fine, I try the other setting "Collect Files and Copy to New Location". This option allows me to now copy everything including rendered scenes featuring my AE compositions (and a lot of excess, unused files)... but still no AE files!
Is it possible to export a Premiere Pro project, excluding unused files, yet include all used files... especially linked files such as AE compositions?

Though not exactly the solution I seek, I've tried an alternative approach... it works (if anyone's interested)... but my original question still stands.
Alternative approach (and probably the only option now):
When I copy & trim my Premiere Pro project via project manager to its new location, I can open the new file and see the track editor now includes broken links to AfterEffects compositions. Since I don't wish to relink these to the current .AEP file, I may package** the original AE project to a location near my newly-located Premiere Pro project folder. To do this, I open the original .AEP file containing any compositions linked to my original Premiere Pro project, and use File < Dependencies < Collect Files. This feature copies all files (and a new .AEP copy) from this AE project to my newly selected destination (as long as no files are missing).
So at this point, when I open my newly-located PP project, I can relink the broken AfterEffects composition links in PP to the new .AEP file. Yay!
**package (for those unaware) is the term used within Adobe InDesign. This feature gathers all linked files that makeup the overall design and layout, and copies into a new folder.

Possible to play a single embedded audio clip over multiple pages?

hi
i'm wondering if it's possible to have a single audio clip play over more than one page in an interactive pdf generated in indesign cs5.5? in the media preview it seems to work but when i export to pdf the audio stops playing when i move to the next page, even when the "stop on page flip" is NOT checked in the media object options box.
what i want is the oppositite of an object with multiple states; looking for a single media object with multiple pages. thoughts? i'm publishing song lyrics, need to have the audio playing through the whole text of the piece when it runs to the next page.
thanks

In the other forum I stated:
It can be done by choosing the right option but it has been my experience that the continuous playback only works in Adobe Acrobat and not in any version of Adobe Reader across different devices including computers.
Your best bet would be to publish an interactive Flash file and if you need that to be on an iOS device get someone with an iOS developer license to convert the published Flash file into an iOS app. You might even be able to convert the Flash file into an epub like a digital magazine but I am inexperienced with this aspect of InDesign. There are good tutorials that I've seen briefly on creating epub digital magazines from InDesign though so do some research on it and report back.
Have you explored any of this thus far? I hope you get some good results.

Is it possible to export a single track?

Similar Messages

Maybe you are looking for