Is it possible to export Final Cut Pro X or .MOV to DVD Studio Pro (Final Cut Studio)?

Is it possible to export Final Cut Pro X projects or .MOV to DVD Studio Pro (from Final Cut Studio v.3)? I'm using the free trial of Final Cut Pro X and later acquired a copy of Final Cut Studio (FCP 7, Compressor 3.5, DVD Studio Pro 4, Color 1.5, Motion 4, Soundtrack Pro 2).
I don't like the default DVD export in FCPX, so I would like to do it on DVD Studio Pro. Is it possible to export the project or the final .MOV file to DVD Studio Pro?
Additionally, can I use unfinished FCPX projects on FCP7?
Is it possible to export from FCPX to Compressor 3.5 (Final Cut Studio)?
Feedback would be greatly appreciated. As of this post, I have about 13 days left on my FCPX trial. Or would it just make sense to just use Final Cut Pro 7, since I have a permanent copy of it?
Thank you.
P.S. Where would be the best place to store projects or any other file related to Final Cut Studio or Final Cut Pro X? My MacBook Pro has 320GB built in storage (only 60GB available), and I have a 1TB external hard drive.
What is best to store on the Macintosh internal hard drive?
What is best to store on the external hard drive?

Yes you can make DVDs in DVDSP using video exported from FCPX.
There are some apps that will translate between X and 7- that said I would highly recommend not going back and forth as the translations are not 1:1 perfect.
I would recommend storing all Events and Projects on the External drive.
Compressor 3.5 will not accept exports directly from FCPX- you'll need Compressor 4 which is $49.
Totally up to you whether you want to make the jump to X. 7 is an EOL'ed program, meaning there will not be another version of that application. Final Cut Pro X is the version being actively developed now.

Similar Messages

Is it possible to export simply the marker list in Logic Pro 8 ?

Is it possible to export simply the marker list from a project in Logic Pro 8 ? I want to present just a marker/cue list for a homework assignment. Thanks for your help.

After populating the DDList you can set a value for that list. Note that if the user did not want to choose a value for that list it will still be set to your default value and that default value will be in your submitted data (this may not be the behaviour that you want).
Paul

Chapter markers won't show in dvd studio pro

I exported my file as a quicktime movie with dvd chapters in fcp. I checked the quicktime file and i can see all the chapter markers. I compressed it using compressor and then imported to DVDsp 4 as i usually do (my hard drive died and i recently reinstalled everything). I droped it in the menu using "create button and chapter indexes". I chose an apple template. I only get one chapter. what happened to my other ones?
I tried also as a test importing the uncompressed final cut file that has the chapters and repeated the above procedure, and still i only got one chapter?
I use to do this all the time, what am i doing wrong?

Compressor should pass along the informations. Did you remember to specify each marker in FCP to be chapter markers. If so, try importing your reference file directly into DVDSP and dropping it into a track. The chapter markers should appear. You can them simply delete out the reference video and replace it with your final encoded MPEG 2.

Exporting .Mov files at 24fps for Final Cut Pro 5

I work at an animation production house and we're trying to export .mov files from QT 7.1.2 at 24fps so they won't have to be rendered in a FCP project which is a 720p project with a frame size of 1280x720, we're experimenting with two codecs. We're using Motion Jpeg A and Photo Jpeg, selecting 24fps but for some reason they import into FCP 5 at 10fps. It's as though QT isn't outputting accurate 24fps .mov files. When I export .mov files from FCP they import back into FCP without having to be rendered. What's the difference between the ones exported from QT vs. the .mov files exported from FCP. We're using the exact same settings and files....? The reason we need to use QT to do this is because it needs to be a somewhat automated process (lots of stills to work with) and our PA's are working on Windows with QT only.

You should post your inquiry at Final Cut Pro section for better support. Anyway, Final Cut Pro does not always recognize the frame rate correctly, depending on which application (and possibly which codec) you used to compress video. For example, Snapz Pro X and Adobe After Effects don't get along with Final Cut Pro in this respect. Furthermore, compressing video in H.264 will be a bad idea. So simply adjust the size of Canvas so that it won't cover the whole screen. In this way, you can even replay video on Canvas and even send it for final production.

Is it possible to export chapters into video files or final cut?

Hello,
I was wondering if it is possibly to export chapters from DVDSP of I would have to rework the chapters again when I edit. Bascially I have chapters, but they all end with a cutoff transition, I've decided to re-edit the 4 hrs of footage on final cut, but was hoping there was an easier way to have the chapters already there. Hopefully this makes sense...
Can Final Cut edit .m2v files?

No, I don't think that you can carry chapters from DVDSP into FCP. I may be wrong. You can however, do the opposite, carry chapter markers from FCP into DVDSP.
Yes, FCP can edit MPEG2.
Good luck.

Export markers from Final Cut Pro X to DVD Studio Pro

Hello,
After finding out how to create chapters via markers in Final Cut Pro we wonder how to export these markers to DVD Studio Pro without having to create ourselves a .txt file and writing the names and the times of the markers in it to export it to DVD Studio Pro. Isn't there a way to make this happen automatically?
Unfortunately the new version of Final Cut Pro doesn't have an export to Quick Time Player and this is why this kind of solution falls out and we really need to create the markers first in Final Cut Pro and not directly in DVD Studio.
Is there a solution?
Thank you.

At present, you cannot add chapter markers in FCP X.
If you send the project to Compressor, you can add chapter markers there, or you can add them in DVD SP.
You can add the chapter markers in Compressor or DVD SP manually, or if you create a text file listing the exact timecode positions (from FCP X storyline) where you want the chapter markers to be (each on a new line) Compressor (or DVD SP) will automatically insert the markers when you point it to the text file.
Andy

Exporting from Final Cut Pro for DVD Studio Pro

In the recent DVDs I've made, the quality seems lower than it has before. I don't think I've changed anything, but I was wondering what is the best format to export a clip from Final Cut Pro and the best way to encode those clips in DVD Studio Pro. Thanks for all your help!
Erin

The best and only format is mpeg2/m2v.
The encoding rate for video is based on the length of the sequence in h/m/s.
They should not be encoded in DVDSP, but exported as a self contained with current settings, no recompression and dropped into Compressor.
Based on length and the type of footage, elect a preset for video and elect Dolby 2 for audio

Still Frames Exported from Final Cut Jitter in DVD Studio Pro

I'm on a Titanium Powerbook G4. I use Final Cut 3.0 and DVD Studio Pro 1.5. Within my film I have several 15 second clips that are each a compilation of a single frame repeated many times so as to get the look of a still picture on the screen. I exported my film as a F.C.P. movie and when I watch it in Quicktime everything appears fine (as it does when I play it from within F.C.P.). However, when I author the DVD with Studio Pro (tried it w/ iDVD also and received the same unwanted result)those clips "jitter" or shake back and forth so I get a blurry image instead of a still, clear image like in F.C.P.
I burn the DVD w/ the internal combo drive on my Powerbook. I have never had an issue w/ any DVD that I have editied, authored or burned on this computer or w/ these programs.
Any ideas?
Thanks, Ryan
Powerbook G4 Mac OS X (10.2.x) F.C.P. 3.0; DVD Studio Pro 1.5

Your answer is here:
http://discussions.apple.com/thread.jspa?threadID=675876&tstart=0

What file type to export vid from final cut to studio pro

Beginner here, the question I have is what is the best file format to export from final cut to studio pro so that I will play in a decent to good quality on a DVD that I make in studio pro. Thanks.

For my FCS projects, I export DV_NTSC "anamorphic" (I use 16:9 format) to a "reference" movie: that is quite fast after all rendering is completed and the resulting file is pretty small. The only disadvantage to "reference" I've found is that you must keep all those FCS file around since those are what is referenced by the export.
I export like that instead of exporting to compressor because for me, exporting directly to compressor is very slow; on my G5 Quad, my compression step is about 1:1 with real time.
You can take those .mov files into DVDSP and let it do the compression using your defaults. I prefer to use Compressor directly so I can set the compression, Dolby, etc. parameters. Compress to mpeg2 and AC3 (Dolby Digital) and if you are just in stereo, just keep it in stereo, check the "no surround encoding" and make sure the highest audio level in either channel is -3db (or the compressor setting let you reduce the level by 3db). That prevents a downmix to mono (like on a cheap TV) from clipping (-3db + -3db = 0db. (zero plus zero = +3db and is clipping).
Ed

I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?

I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?

As Tom said the FCS forum is the better place to post the question.
Here is Apple's best practices doc for installing both on the same system.
BTW, FCP7 is part of the FCS 3 suite of apps.
Russ

Exporting / Importing into DVD Studio Pro from Final Cut Pro

Hi All,
I am am exporting footage from FCP HD and importing it into DVDSP, the final DVD will be set to 16:9. So what do I export my files from FCP as? Someone told me that I don't export it at 16:9, I export it so it's squashed and then DVD SP does it's thing to it...
Any ideas?
Thanks,
Tom

Hi Tom,
When I do this I work in FCP using a 16:9 format setting then export using Compressor. In Compressor I choose a best quality option and make sure the 16:9 setting is enabled in the settign dialog box (in the Batch window next to Source Media - just double click on setting).
In DVDSP you simply ensure the project is in PAL or NTSC and 16:9 format.
This takes care of the whole thing with the finished article paying back fine on 16:9 monitors.
Best of luck
Michael

Best setting on DVD studio pro for PNG vid from final cut w/1280x720 res

Okay, so I am trying to find the way to make my video look best on a 720p tv set. The video is for kiosk use, so will only show on this one tv over and over. I want the text to look super crisp and sharp, so I have exported the video from final cut studio as a png with 1280 x 720 HD resolution. When I import it as an asset on DVD studio pro I notice that the resolution in the track menu is showing as 720x480i. What's the best way for me to setup DVD studio pro, so my video retains as much clarity and sharpness as possible? Is there no way to make it super sharp on an SD DVD? I set the encoding to Two pass VBR and the bit rate to 6.8 and max bit rate to 8.0, motion estimation to best... any tips would be highly appreciated. Thanks.

I want the text to look super crisp and sharp
then use a computer and presentation software, Powerpoint, Keynote Open Office Impress which is FREE
1280 x 1024 rez is a basic standard these days
http://www.apple.com/iwork/keynote/
http://www.openoffice.org/product/impress.html
I have exported the video from final cut studio as a png with 1280 x 720 HD resolution.
this is waste of time, your next step is compressing this image down to something like a tenth of its original size with much lower rez to an MPEG2
if you want acceptable results at video rez 720x576 PAL then use DVDSP
but you have to accept that creating a DVD severely compresses the video to MPEG2, which is fine for moving video but isnt the sharpest compared to computer rez.

Quicktime 7.1.5 Doesn't Install Movie To Apple TV in Final Cut Pro 3

Quicktime 7.1.5 Doesn't Install Movie To Apple TV in Final Cut Pro 3. A bug? Or on purpose on the part of Apple?!

There has been some reports that exporting to Apple TV doesn't show up in some versions of FCP. If it doesn't show up in your version of FCP please read this thread:
http://discussions.apple.com/message.jspa?messageID=4285687#4285687

Aperture and other Pro Applications ( Final Cut, Motion, DVD Studio Pro )

Hi folks,
I have bought Final Cut Studio a while back, and have been working with all the tools for a while now ( FCP, Motion and DVD Studio Pro ). Recently I also switched to Aperture to manage / capture / organise my digital photographs ( previously I used iPhoto ).
Now I was wondering how I could use the pictures from my Aperture library in Motion or DVD Studio Pro. When I look at the file Browser, I can easily use some iPhoto pictures, but apparently I can't seem to find anything for Aperture.
What I would like to do is use some pictures from Aperture in a Motion project and also include an Aperture album in DVD Studio as a SlideShow.
What would be the best way to do this ? Do I have to export the pictures I want to use ? Or am I missing something ?
Regards,
Stefaan

Stefaan,
Unfortunately, that type of integration between the Pro Apps is not there (yet). It would definitely be a nice feature to have. We should all send feedback to Apple asking for this feature. For now, you will need to export photos for use in these other apps.
Along the same lines, I would also like to see integration with Aperture and the "iLife" programs. Since Aperture will likely replace iPhoto for at least some of us, it would be nice to be able to use Aperture photos in these apps as well.
--Joe

Major Problem with audio from Final Cut to DVd Studio Pro

I am posting this problem again because no further responses have been received regarding my first post. I purchased an MR-HD100 Firestore device from Focus Enhancements. When I use clips from it alone or with other clips created by digitizing from min DV tape on a sequence or timeline the audio works fine in Final Cut. When I import any type of file and believe me I have been trying all kinds of suggestions and wasting almost a dozen DVDs. Whether it be a Final Cut QT file, going straight to compressor and producing an MPEG-2 file and a dolby audio file .ac3 importing them into DVD SP and making the adjustments that MR. Harbsmeier suggested DIAL NORM at -31dbfs and COMPRESSION MODE to NONE, as well as the suggestion to make an aif file with the audio and importing it into DVD SP as well as the video. I get the same result with every try, the clips made with the firestore are so low you cannot hear them. NOTHING WORKS!!!!. And yes I have tried making a DVD with just digitized footage and yes it turned out fine. I called Apple support today and that gentlemen basically told me I am out of warranty so phone help was not available. However, he made a suggestion of changing sequence presets in Final Cut which has now developed into another problem. I have messed up my settings so bad I don't know where I am I can't LOG & CAPTURE in the manner I used to ???? Could someone please advise as to why this problem exists and the correction to resolve it. I do not understand why the audio works fine playing the sequence on the timeline in Final Cut. It plays fine after making a Final Cut QT file. AND it plays fine in simulation mode in DVD Studio Pro. However after you burn a DVD the audio from the firestore clips are not to be heard unless you crank up the speakers or TV to it's maximum level and you can barely make it out. PLEASE PLEASE PLEASE HELP ME Projects are stacking up and was really hoping to go tapeless

Try building the project to your desktop and then open the Video_TS in the Mac DVD player application.
How does it play/sound? This application is the best way to see and hear how your burned DVD should play vs. just using simulator and burning.
Just to clarify- are you taking your FC QT file into Compressor and creating a MPG-2 and AC3 file or are you bringing your FC QT directly into DSP?
What codec are you exporting from FC? ProRes422, DV, H264?
Open the FC QT in QT and apple+I to see this.
What does it say for audio?

Is it possible to export Final Cut Pro X or .MOV to DVD Studio Pro (Final Cut Studio)?

Similar Messages

Maybe you are looking for