Is it possible to export/import only a page of an application?
Hi,
I tried to export one page of an application and this works correctly;
then I import the same page in another application without problem, but when I try to install the page I obtain an error.
Is this a bug?
Can anyone help me?
Thanks.
After doing the import of the page (page2) successfully in a new application (application2), when I click on the button Install page, I have this error:
File is not a valid HTML DB export file
In effect, if I check the pages within the application2, there is not page2.
I hope I have been clear enough
Similar Messages
-
Is it possible to export of the stage of a Flex application in vector format?
Is it possible to export of the stage of a Flex application in vector format?
Right now our only option is to render our graphs to a (large, off-screen) bitmap and export that bitmap, which is a real shame because every
component in Wondergraphs is 100% vector based. Anyone at Adobe know more about this?Hi.
Try start->search for pen and touch--> then uncheck "Use your finger as an input device" in the Touch tab. -
Is it possible to export/import subclips between 2 different computers?
hi,
i am collaborating on a project with someone, we need to export/import subclips between 2 different computers. is thisa possible, and how?Hi there,
I'm the other collaborator on a project with Jelly Belly. As I am coming from using abode premier pro to final cut, the concept of sub clips is new to me.
We are planning on capturing close to 50 mini dv tapes, in as far as possible complete master clips for each tape. Once this is complete we will have all master clips copied to two identical 1T external hard drives.
Then the plan is to break the master clips down into sub clips in order to thin out and better organize the footage. To speed this process up we plan to do this concurrently on two separate computers, at this stage both running Final Cut Express 4. Once this is done is it possible to import those sub clips into a new project? At this point we will most likely running Final Cut Studio 3.
If so then how would one go about doing it?
Thanks for any further advise on this. -
EIF Export/Import Only Metadata
The following export statement 'export' entire AW with data. And import also imports everything.
exec dbms_aw.execute('export all to eif file ''MYDIR/TEST_OLAP.eif'' api');
exec dbms_aw.execute('import all from eif file ''MYDIR/TEST_OLAP.eif'' api');
Can I only export and import the metadata(like we do XML template) using commands like above?Just learned... Try below.
jarname_ is the name of the AWM jar. e.g. awm11.2.0.2.0.jar
user is the name of your user. e.g. TESTOLAP
password is the password for your user
url is the url for a node in your RAC cluster. e.g. jdbc:oracle:thin:@myserver:1521:orcl
filename is the name of the XML file to create. e.g. testolap.xml
java -classpath jarname_ oracle.olapi.metadata.util.ExportXML -user user -password password -url url > filename
The java version should be "1.6.0_24". -
Is it possible to export/import schedule+objects separately from the background?
Hi all,
I work on a tutorial for software that is being developped. the functionalities are definitely ok but the design is being modified.
I would like to prepare the tutorial with the temporary design and definitive schedule and objects (buttons, texts...), and as a final step modify the design only. Is it possible?
Thanks in advance for reply.Hello,
One tip: you can have as many master slides as you want, and even apply a master slide to a group. So in your case you could have the background for the normal calculator and for the scientific calculator on two different master slides. But all need to have the same resolution (width/height in pixel) if you want them in the same file.
But: you can duplicate slides, only every object will have a new ID on the duplicate.
Perhaps I understand wrong. If you have two files: copy the first file to a file with another name and change the master slide. Are you starting with images, not with a capture? Then even easier: import the images to the Library. Copy them to all the slides?
The Filmstrip itself is not very interactive, you cannot do a lot in it. But a duplicate file should have exactly the same branchings.
Wondering if you use advanced actions? Can you confirm that?
FYI: once I blogged about the simulation of a keypad:
Create a keypad simulation
BTW: you can print the branching panel, did you ever consider that? It has a lot more information than the simple Filmstrip
Lilybiri -
Export/import portal favorites
Hi, we have NW2004 Portal SP16. Is it possible to export/import portal favorites between users? The reason I asked is that we are planning on using 2 LDAP data sources in production and some users will be migrated in Active Directory from companyA.com to companyB.com. We noticed in our development environment that the favorites are gone.
Thanks in advanceI asked OSS and they said :
you should be able to transport these as an
offline package using ICE. It should simply be a case of transporting
over the userhome directory. However, please insure that the user is
a system principal and has full control of all the userhome
directories otherwise you may experience problems with permissions.
Please see the link below regarding transporting Offline content in ICE -
Is it possible to export display macosx graphical interface?
Hi all,
i don't know if it's the right place to post but maybe people with good experience about export display can help.
As indicated in the subject, my question concerns export display and particularly exporting display the macosx graphical interface on some unix-like box.
I know it is possible to export display using X11, so all X applications can appear on my macbook. I know people can log into a remote server running a xdmcp server so the remote graphical interface can be displayed locally. VNC or timbuktu are other solutions to remotely take control of the macosx grahical interface.
But i would like to know if people know a way, not using VNC or timbuktu, to export display the remote macosx graphical interface to a local unix-like box.
Thanks in advance for your help.I am using "Chicken of the VNC" on my macbook to remotely control
a mac os x server. It works just fine, and i am really happy of it:
But, there is always a but, for instance the keyboard mapping is incomplete:
the "dot" symbol is absent. The only way to get it is to use the virtual keyboard. That's why i use ssh/X11 export display to run a terminal and get the complete keyboard mapping from my macbook. But when you want to manage users accounts/shares in WGM it becomes rapidly irritating.
Now i would like to know a way to have the whole thing in one place...
and unfortunately it seems that this keyboard mapping issue in cotVNC will remain unfixed.
I hope you understand my despair. -
Access Connection export/import feature
Hi all,
Is it possible to export/import WiFi profile Pre-Shared key ?
Thank you
MatYou mean besides just exporting and importing the wireless profile that uses that key?!?
You can also create a deployment file that will contain the key.
Just remember that profile exports/deployments are operating system and version dependant. i.e don't try to import a profile in v5.31 for Vista from a v4.42 version for XP. -
How to export scenarios in oracle Data Integrator from project.
is there any way to do this .I do not want to import/export actual project contents like procedure,interfaces and packages instead i want export/import only scenarios
at a single strech(entire project)
Thanks
prasannaHi Prasanna,
Yes you can export/import scenario by right clicking on the generated scenario and say Export. It will export that scenario as a XML file at your desired dir, from there you can again import it back by right clicking on scenario and say import scenario.
Thanks,
Guru -
CFolder- Export/Import of Project BOM
Hi All,
Our client is global company which is having two level of company codes. for example - Sales and Engineering.
We want to use cFolder functionality to share the information within different company code.
1 .Is it possible to use cFolder for the above scenario?
2. Is it possible to export /import the Project BOM ( from SAP PS)
Thanks
Yogesh PHi Yogesh,
Hope your question is export / import of WBS BOM.. Seems not possible as standard functionality
Material BOM, Material, Documents and MPN's possible
Please refer http://help.sap.com/saphelp_ppm450sp04/helpdata/en/23/72dd85c96e934087c1032c7e824818/content.htm
Regards,
Aby -
How to Export/Import a Page Group?
Hi All,
I'm having problems to export a page group from a dev server to a production server. What I had done with succesfull:
- I created the transport set table in dev server by clicking on Export link under page group;
- I executed the script and generated the dump file without warnings;
- I executed the import script in the production server without warnings;
When I will Import the transport table to my production server via Oracle Portal Interface, the status of the page group is Fail. Why?
I created the user groups before, that are the same of the dev instance.
Note: In my production instance there is no page group. It is my first export/import of this page group.
What steps I need to do? Am I do anything wrong?
Best regards,
JV.This is the error log that I received:
Transport Set : PORTAL_DEVELOPER - 22-NOV-2004 08:11:32
Import Access Control Lists - Yes
Include Preferences for Users/Groups - Yes
Ignore Warnings - Yes
Advanced Logging - Yes
Started By: PORTAL_DEVELOPER
Started On: 22/11/04 09:02:05
Pre-Check
Start of Importing External Application
Validating and registering provider: ORACLE PORTAL
Precheck complete for PROVIDER ORACLE PORTAL
Validating and registering provider: PORTAL CONTENT AREA
Precheck complete for PROVIDER PORTAL CONTENT AREA
Validating and registering provider: PORTAL_GVTE8868E64F2A8F055E030007F02000ED4
Precheck complete for PROVIDER PORTAL_GVTE8868E64F2A8F055E030007F02000ED4
Precheck failed for APP_TEMPLATE IU_BANNER_GVT
Precheck failed for ITEMTYPE Oracle_Reports
Precheck failed for ATTRIBUTE Oracle_Reports_Components
Precheck failed for ATTRIBUTE Display_Reports_Parameter_Form
Precheck failed for ATTRIBUTE Display_In_New_browser
Precheck failed for PAGEGROUP PORTAL_GVT
Precheck failed for STYLE PORTAL_GVT
Precheck failed for STYLE ESTILO_ITENS_DEPTOS
Precheck failed for STYLE ESTILO_ITENS_DEPTOS_BRANCO
Precheck failed for STYLE ESTILO_ITENS_DEPTOS_DEGRADE
Precheck failed for STYLE ESTILO_ITENS_DEPTOS_PRINCIPAL
Precheck failed for PAGE PORTAL_GVT
Precheck failed for NAVBAR SAMPLE_BANNER1
Precheck failed for NAVBAR SAMPLE_VERTICAL_NAVBAR
Precheck failed for PAGE_TEMPLATE TEMPLATE_GVT_PRINCIPAL
Precheck failed for NAVBAR COPY_OF_ORIGINAL
Path not found: PAGE/PORTAL_GVT/PAGE_PRINCIPAL/
Path not found: PAGE/PORTAL_GVT/
Precheck failed for PAGE PAGE_PRINCIPAL
Precheck failed for NAVBAR COPY_OF_SAMPLE_BANNER1
Precheck failed for NAVBAR BANNER_PORTAL_GVT
Path not found: PAGE/PORTAL_GVT/MENU_PRINCIPAL/
Path not found: PAGE/PORTAL_GVT/
Precheck failed for PAGE MENU_PRINCIPAL
Path not found: PAGE/PORTAL_GVT/WWCTX_API/
Path not found: PAGE/PORTAL_GVT/
Precheck failed for PAGE WWCTX_API
Path not found: PAGE/PORTAL_GVT/WWCTX_API_2/
Path not found: PAGE/PORTAL_GVT/
Precheck failed for PAGE WWCTX_API_2
Precheck failed for PAGE_TEMPLATE TEMPLATE_GVT_DEPTO_INTERNA
Path not found: PAGE/PORTAL_GVT/PAGE_DEPTOS_JURIDICO_INTERNA/
Path not found: PAGE/PORTAL_GVT/
Precheck failed for PAGE PAGE_DEPTOS_JURIDICO_INTERNA
Precheck failed for PAGE_TEMPLATE TEMPLATE_GVT_DEPTO_HOME
Path not found: PAGE/PORTAL_GVT/PAGE_DEPTOS_JURIDICO/
Path not found: PAGE/PORTAL_GVT/
Precheck failed for PAGE PAGE_DEPTOS_JURIDICO
Path not found: PAGE/PORTAL_GVT/PAGE_APPROVAL_CHEFE/
Path not found: PAGE/PORTAL_GVT/
Precheck failed for PAGE PAGE_APPROVAL_CHEFE
Path not found: PAGE/PORTAL_GVT/PAGE_APPROVAL_SECAO/
Path not found: PAGE/PORTAL_GVT/
Precheck failed for PAGE PAGE_APPROVAL_SECAO
Pre-checking search portlet preferences...
Determining new dependency ids from target tables...
... determining new page group ids
... determining new image ids
... determining new style ids
... determining new attribute ids
... determining new item type ids
... determining new page ids
... determining new category ids
... determining new perspective ids
Precheck complete for search portlet preferences...
[22/11/04 09:02:05][WARNING] id = NULL context = wwutl_api_import_security.group_id user = PORTAL_DEVELOPER Group not found in OID. DN: cn=todos_grupos,cn=portal.040729.1113,cn=groups,dc=develop,dc=net
[22/11/04 09:02:05][WARNING] id = NULL context = wwutl_api_import_security.group_id user = PORTAL_DEVELOPER Group not found in OID. DN: cn=visitantes_grupo,cn=portal.040729.1113,cn=groups,dc=develop,dc=net
Completed On: 22/11/04 09:02:05 -
Is it possible to export and import the roles and users tables?
Hi,
is there any possibility to export and import the role and user definitions?
We have a SAP MDM repository with a lot of roles and users and also with a lot of changes.
And now I'm searching for a fast and efficient way of managing the roles and users.
Thanks and Regards, MelanieHi Melanie,
There is no export/import functionality for roles and users. The only way to manage these in an automated way would be to write a program that uses the Java or ABAP APIs. Both APIs expose functionality to create, update and delete roles and users.
Hope this helps,
Richard -
Is it possible to import, only changes since last import using imp/impdp
on our production environment, we export three times a day.(10.00AM,1.00PM,6:30PM)
and We only want to import the evening export - we have to kind of make sure that if the online system fails _ we have a data up to yesterday evening.
i.e. we want a sort of incremental import, for example we would have yesterday's evening import and today we only want to import all the changes since yesterday's evenings import - that means we want to import into existing database but we want to import only the changes since last import.
it would be great to hear from you
the database is 10g R1
thank youThank you all, for your prompt response
I know about RMAN, but our management outsourced our data center and the guys there does not look comfortable around oracle - and me as a DBA was assigned to taking this export backup and import it to another PC once in a day
so I was thinking if it was possible to import "incrementally"
it is good to know that it is not possible, because I don't have to spend time looking for a solution which is not there.
Thanks all -
Is it possible to export contacts from Outlook 2011 for Mac and importing this file back into Mac Address Book.? please reply me its urgent
Is it possible to export contacts from Outlook 2011 for Mac and importing this file back into Mac Address Book.? please reply me its urgent
-
Is it possible to export and import a set of variables?
Hi,
I'm using RH8 under WinXP. I use variables for our product names (=single software modules). This makes it easier to change the name, if a product name has changed. For each of these products there is a single RH-project. Now I want to import a set of variables, that I've created in one of those projects, to another project. Up to now, I haven't found an export/import option in RH for these set of variables. Is there a possibility to import/export these variables?
Kind regards
StefanSet up a test project close it, copy the rhvariable.apj file from a project with the variables into it. Reopen the test project.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Maybe you are looking for
-
IMac continuously beeps three times when FireWire HDD is attached
Hi there, Whenever I reboot my iMac while my external FireWire HDD is attached to it, it continuously beeps three times in a row. I detach it, and restart the iMac, and voila, it boots again! Any ideas why it can't boot while my FireWire HDD is attac
-
E-Mail response with Prev. Ans. Repeated and Pers. Info.
It seems like more people are using email response, many from their phones. On many of these responses there is a messages at the bottom with their name, e-mail, phone number, and address. There is also a repeat of the previous response. This put
-
How do I get Obrona adware off my comuter and off firefox?
Two days ago, this adware showed up. I think I got it when I thought is was asked to download an update to Windows Video player. Anyway, it now is taking over my internet searches. Amazon, for example, now has unwanted pop up ads appearing on its sit
-
Lightroom 4.3. "The following files were not imported because they could not be read." The problem is not my camera or my card or my card reader. My computer and its hard drive are fine. A brief online search makes it clear that this has happened
-
I have Photoshop Elements 12. When I open the program, the tools, menu, everything is teeny tiny. Can barely read it. What's wring and how can I rectify it?