Is it possible to export part of the FCPX Project from timeline

Is it possible to export a selection from the FCPX timeline or do I have to export the entire project and then edit it in another program.

andynick wrote:
Goldfish wrote:
FCP7 was much better for this:
Yes - but you don't mention the billion ways in which FCP X makes FCP 7 totally obsolete.
Andy
I didn't think it was relevant to the thread.
I'm simply encouraging the return of a few features that were left on the cutting room floor - no harm in that.
I O markers and chapter markers are a few of them and routinely a topic of discussion. It's not just me.
For the record I'm a big Fan of FCPX. It has many of the features that I said, for years,  should be added to FCP7 -  and I took a lot of heat over the years for pointing out the deficiencies in FCP7.
When a new editor comes to the forum and asks "why can't i do this really simple thing" , I think it's better to acknowledge his observation and encourage constructive feedback to Apple rather than implying that he was stupid for knot figuring out a convoluted work-around for something that should exist in the program.
If your post had started with "here's a work around…." rather than " takes seconds…"
and you had finished with "…hopefully we'll see I O markers in a future update…"
Rather than "…Ctrl+Zs to get back to previous state." you never would have heard a peep from me.
I just find the apologist mentality difficult to ignore. No offense intended.
best regards,
g
PS - I also think "totally obsolete" is a bit of a stretch.

Similar Messages

  • Is it possible to export and import the roles and users tables?

    Hi,
    is there any possibility to export and import the role and user definitions?
    We have a SAP MDM repository with a lot of roles and users and also with a lot of changes.
    And now I'm searching for a fast and efficient way of managing the roles and users.
    Thanks and Regards, Melanie

    Hi Melanie,
    There is no export/import functionality for roles and users.  The only way to manage these in an automated way would be to write a program that uses the Java or ABAP APIs.  Both APIs expose functionality to create, update and delete roles and users.
    Hope this helps,
    Richard

  • Is possible for me to use the wireless connection from my Macbook Pro

    Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

    Yes. Just use internet sharing on your MacBook Pro.

  • Undeploying the BPM project from Oracle Business Process Workspace

    Hi all,
    I am facing problem in deploying the project to Oracle Business Process Workspace, I had some issues while deploying the project for the first time, and now when i am again trying to deploy the same project, it is giving the error "*Deployment failed, Module already exists on server*".
    is there any way i can deploy the project or delete the existing project from workspace and then redeploy the project ?
    IDE used : Jdeveloper 11.1.5
    Server used : Weblogic 10.3
    Please guide me in this as soon as possible.
    Thanks and Regards
    Debarati

    Hi
    1. Yes, from EM Console, first Undeploy the Workflow Project that you can find under SOA -> soa_infra -> default node.
    2. Then expand Application Deployments -> Look for the UI Project (that has taskforms etc) and make sure to select it and Undeploy this also.
    3. Now comes, what and how exactly are you deploying your SOA/BPM application. Any SOA/BPM application will have one Workflow project (atleast) and one or more UI Projects (for each user task). Also there may be some other utility projects or EJB projects. Now to deploy the entire application you have couple of options. Just select your Workflow project and deploy and during this time, it will list out all UI Projects and you can check all of them. Also for Workflow you can check one check box to overwrite any existing versions like 1.0. In this way you will have full Workflow deployed and all UI Projects also deployed. Once you do this, you cannot again deploy just the UI Project. Thats when you get these errors like already deployed etc. Now disadvantage here is, if you just make only UI changes, you cannot deploy only UI Project since it is already deployed as part of full app. So you had to again deploy Workflow project and check all ui projects also. this means all your existing workflow instances will become stale (redeploy of workflow makes all old tasks stale).
    4. Another and more ideal standard way is, first deploy just the Workflow project and DO NOT check any UI Projects. Then from the Application Level, deploy the entire application that includes all the UI Project and any other Projects. Just select your application, properties and deployment section. And see the projects included in the application. Make sure you DO NOT check the workflow project. But check all other projects like UI or any other project. In this way, any changes you make to UI or EJBs, just deploy the application. Your workflow is still the same old. Bottom line, Workflow Project is created as a SAR (SOA Archive) which is like a jar file. And entire application is deployed like an EAR file. So you will have 2 files for deployment to any other Env where you do not have like JDev.
    For now, follow first 2 steps, to undeploy all the stuff you have. Then you should be able to redeploy using one of the above options.
    Thanks
    Ravi Jegga

  • Does anyone have experience with having multiple editors work on the same project from different computers?

    Does anyone have experience with having multiple editors work on the same project from different computers?

    As much as I hate to admit it, YOU ARE RIGHT!
    I will tread lightly on this project.
    Thanks for the sanity check,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • RMI call back - How to refer to the client project from the server project?

    Hi, I am working on an RMI assignment which basically needs me to use the RMI call back for the server to notify the clients.
    I have 2 projects , one for the client and another for the server.
    In the client project, I have a client interface and the main client class implements this interface.
    In the server project, I have a server interface and a class that implements this interface.
    I can use the server interface in the client project's code by adding the server project in the path of the client project. it lets me use the server interface in the code if I put "import.." statement.
    But the issue is I can not do the same to access the client interface from within the server project's code. Since that will be a circular reference, the compiler does not let me use the client interface from within the server's code. This is putting me in a great difficulty and I am stuck here. What should I do so that I can use the client interface and the compiler won't complain?
    Thanks for any help..
    Regards.. js

    Let me explain what I tried: I manually generated stub class of the client using the Eclipse IDE as mentioned in my previous message. The StockMSClient_Stub.class got created in my client project.
    The common project has the 2 interfaces - one from the client and one from the server.
    I have added reference to the common project from the client and server projects to use the interfaces.
    With the above mentioned in place, when I run the server project, the registry binding of the server objects is very fine. But I am getting error in the applet at the line where I am passing the client object to the method provided by the server interface. The following is the code snippet in the applet where I am getting the error.
    specifically the line: String response = objs.login(userId, password, smsClient);     ====================
    public void login() {
                Registry reg = null;
                String userId = "test";
                String password = "test";
                this.smsClient = new StockMSClient();
                try {
         reg = LocateRegistry.getRegistry(rmiHost,rmiPort);
                          UserInterface obj = (UserInterface) reg.lookup(rmiStrings
                                                                                                                        [1]);
         User u = obj.find(userId);
         if (u == null) {
              System.out.println("This user is not valid");
         } else {
                         UnicastRemoteObject.exportObject(smsClient);
         reg = LocateRegistry.getRegistry(rmiHost, rmiPort);
         LoginLogoutInterface objs = (LoginLogoutInterface) reg
                                   .lookup(rmiStrings[0]);
                        //getting error at the following line.
                        String response = objs.login(userId, password, smsClient);     
                         System.out.println("response :" + response);
               } catch (AccessException ae) {
                       System.out.println(ae);
               } catch (NotBoundException nbe) {
                      System.out.println(nbe);
               } catch (RemoteException re) {
                      System.out.println(re);
    } //end login()====================
    Error is:
    java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
         java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
         java.lang.ClassNotFoundException: sms.rmi.graphics.StockMSClient_Stub (no security manager: RMI class loader disabled)================
    I don't know why this is happening..Please help.
    thanks & regards, js
    Message was edited by:
    jsitaraman

  • Failed to download the example project from Oracle site.

    Hello,
    Every Time I am trying to run a sample or load an example I am getting the following error in workshop 10.3.
    Failed to download the example project from Oracle site.
    what do I do?
    Thanks,
    Indu.
    Edited by: user8828376 on Sep 27, 2009 5:12 PM

    Hi Indu,
    what kind of he samples your are trying to install in workshop 10.3.
    Do you have site address.
    if you need any further help on this put complete details so that we can able to help you more.
    Regards,
    Kal.
    (Thanks for you using OTN forums and sharing knowledge.)

  • Export part of the timeline

    Hi,
    Is it possible to mark in/out on the timeline and only export this part in PPRO CS3?
    Thanks in advance.
    /Ulf

    You can do it, but not with In & Out points. You do it by setting the work area bar to the portion you want to export, and setting the export options to Work Area rather then Entire Sequence.

  • Export part of the project

    Anybody found a way to only export a section of a project? IN FCP 7 I would just go in the timeline and press I and O to select the wanted area and that's it. It's a very useful feature if I need to export a clip to do some stuff in AE and then bring it back in FCP.
    It was also useful because I could leave some clips in the time line that I could use later but they would not be exported because they were outside the in/out section of the project.
    The only work around I found is to select a part of the clip I want (I may have to do a compound clip first), copy it, create a new project, past it and export. It's a long and unefficient workflow.
    Ay idea?
    Robert

    Sorry, you can't. Other people have made threads about it too. Your work-around is the only one available.

  • SSIS - creating part of the file name from an id in the database

    I am trying to figure out how to pull an "id" from my data source to include in the file name. Right now the file name created looks like customer_002_timestamp.txt. I need to add the id to the file name and I need to grab it at the time I get
    the data, so then the file name becomes customer_002_id_timestamp.txt.
    My data source is Oracle and I am using Attunity, so I do not have the capability of using the resultset found in the SQL Task because I have to use the data task.
    Has anyone ever extracted an id from a query against Oracle using the Attunity connector to add as part of the file name? If so, how would I add that to my control flow task?
    Thanks in advance for any assistance.

    Is it a static id value you want
    Then you can just use a SSIS variable to hold value from resultset in execute sql task
    Then inside your data flow you can use an expression for setting value of another variable which can be used for setting filename in your destination task. The expression will include logic to concatenate id variable also which we populated in the previous
    step.
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • How copy part of the array buffer from ColorFrame

    I want copy part of the color frame When I receive it.
    Is there way to do that without copy all the byte array first? (+ example)
    (Question similar to Kinect 1,
    but for kinect 2)

    if you access the raw data you can set offsets based not he width/height of the color frame(y*width+x). The c++ and managed api provide that as a function of the frame. These api's are used in some of the samples so review the code if you are
    unsure of the api use:
    c++ AccessRawUnderlyingBuffer
    https://msdn.microsoft.com/en-us/library/microsoft.kinect.kinect.icolorframe.accessrawunderlyingbuffer.aspx
    .Net c# - LockRawImageBuffer
    https://msdn.microsoft.com/en-us/library/windowspreview.kinect.colorframe.lockrawimagebuffer.aspx
    Carmine Sirignano - MSFT

  • I use my computer with my wife, when i downloaded itunes it was on my part of the computer, but one day had my ipod connected to my wifes part of the computer and from then on have always signed into her part, but now cant retrieve my films from my part

    i cant retrieve films from i tunes that i downloaded on my part of the computer i share with my wife, as i somehow selected to sync on her part, now i keep getting a message that says, the ipod paddys ipod cannot be synced .you dont have enough access privalages for this operation.

    I'd wager a six-pack of cold adult beverage that you are still "logged in" to her iTunes account....
    Make sure you are logged in to YOUR computer account, then lauch iTunes.  Go to the Apps Store.  Verify that you can log in to YOUR iTunes account.
    From that point you should be able to get your stuff.  If not you may have to reset to factory and then restore from a backup....

  • Export *part* of a multitrack project?

    I don't seem to be able to find what I'm looking for - I'd like to be able to export a section of a MT project , between markers perhaps, to a stereo file. There are work-arounds, but all of them are inconvenient. Any clues?

    Hi Graeme,
    Just click-drag in the ruler of the multitrack project to create a cycle region (In Soundtrack Pro 2.0 you can also set the in/out points by pressing the "i" or "o" keys respectively to set the in/out points at the current playhead position).
    Then make sure that the cycle button is pressed (this is the second from the right in the main transport control area, and it looks like an oval sort of recycling loop). If it is pressed, it will look a but darker, and the cycle region on the ruler will be solid (not ghosted out)
    Export your mix: File->Export -- you will just get an export of the cycle region.

  • Is it possible to get back to the Try block from a Catch block?

    I would like to perform validations on a config file. To do so, I have a method which will throw a MissingConfigException or an InvalidConfigException if something is missing or if something doesn't match a regex pattern. Although I have to do that with many different configs and I would like to go through all of them so that my error message will report all missing / incorrect configs at once instead of 1 at a time. Thus, I wanted to know if there would be any way I could do something like:
    try {
         config.validate("ServerPort","\\d+");
         config.validate("MaxClients","\\d+");
    } catch(MissingConfigException e) {
    } catch(InvalidConfigException e) {
    and have the catch block executed before going through the try block from where the exception was thrown.
    Thanks in advance!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    No, you can't jump back into the try. You can put your try/catch inside a loop though, so that if one fails, it will loop around and start a new try for the next one. Define a class that holds all the data you need to pass to validate, and make an array or List of those objects. Change or add a validate signature that takes this object, or just extract the strings from each one when you call validate.
    ThingToValidate[] val = new ThingToValidate[] { new ThingToValidate("ServerPort", "\\d+"),
        new ThingToValidate("MaxClients", "\\d+"),
    for (int ix = 0; ix < val.length; ix++) {
        try {
            config.validate(val[ix]);
            // OR
            config.validate(val[ix].getThingy, val[ix].getOtherThingy[]);
        catch (....) {
            // logger.warn("failed...");

  • LLDB: A new debugger for developers ... part of the LLVM project

    I recently submitted https://aur.archlinux.org/packages/lldb-svn/ to the AUR.
    The main website for the LLDB project is here: http://lldb.llvm.org/.
    LLDB aims to be modular and easy to use and maintains much of the familiarity of GDB. This allows GDB users to quickly ramp up to start using LLDB.
    LLDB is also able to disassemble machine code using LLVM libraries so as soon as new instructions are added to LLVM, they are automatically available in LLDB.
    LLDB also has a large and active developer base and a larger customer base will get more bugs filed and hence better support for non-traditional distros like Archlinux. I myself am a long-term Arch user and even mentioning it at my workplace sparked quite some interest in the distribution.
    The main motivation to submit this package was to get a larger customer base for the LLDB project that one of the teams were developing during my Winter internship at Intel Corporation, one of the main contributors to the LLVM project.
    It does however take some time to build as it needs to build the LLVM libraries, the Clang libraries and then LLDB libraries/executables. If someone is interested enough to give it a try, please do and upvote the AUR submission and/or report any build/install problems and I will try to fix them.
    Also, AFAIK, LLDB does not support multi-threaded executables yet. I am not sure since my internship ended a while ago.
    Thanks!
    Last edited by mtahmed (2013-05-01 04:05:36)

    B. I have only been given a QT file of the pilot, as to cut a rough idea of the trailer, which I will then have to redo with the original HD files, when I return to them tomorrow.
    Well, this will make cutting more difficult. Because a low res version of the trailer will not have any timecode...nothing that references the main movie. So you will do the cut with the QT movie and then have to go back and eyematch-cut the trailer with the high res footage. Not fun and very time consuming. Not to mention that you will be cutting with the mixed audio of the trailer, including music and that will not sound right when you cut the trailer with the new music.
    You need a QT version of the movie that contains the timecode of the original master (using media Manager to recompress to DV or other offline codec will do this), and you REALLY need to get split track audio. If they are record producers, they'll know what that is.
    Shane

Maybe you are looking for