Is it possible to Extend the Storage Bin Length from 10 Char to 25 Char

Dear Experts,
We have a Requirement for Extending the Storage Bin Length from 10 Character to 25 Character.
Question 1:
Is it possible to Extend or Not?
Question 2:
Even if we extend what will be Impact on the Current Storage Bin Numbers used now.
Thanks for your support in Advance.

No, you can't change length for storage bin field in standard and also it is not suggestable to client. If client forcing on requirement, You can suggest like below.
create one more field for EXT.storage bin by using enhancement and do one customized report for show as , storage bin number+EXT.storage bin = actual storage bin.
For only client reference you do this report and in standard reports it will not show like this else tell to client ---> it is not possible, because it is replicating and using at different programmes.

Similar Messages

How do I extend the storage space on my iphone?

Hi Guys
I want to extend the storage space across my idevices since my wife can't stop taking photos of our new addition to the family on her iphone.
We already both use iTunes Match so there is music on our phones it's all streamed off the cloud which works well I can recommend this.
The problem now comes from the fact we now need extra storage space for photos and videos taken on ios. Photo stream does a good job of syncing photos across devices but not video. It would be nice if iCloud did this but found that it fell short of the mark on anything but backing up my iphone since the things it stores in the cloud seem limited.
Dropbox seems like a good alternative to this since it will work on all devices but may require management on a separate computer and am not sure if it will work with streaming video I guess I can give it a go and see.
Has anybody got a good experience with photo / video streaming across idevices that they can share?
Regards
Chris

Hi
Thanks for your response.
Buying a bigger iphone was just too obvious an answer.
We already have the backup to mac in place it just means that to view pics that you need to turn on the big machine.
I would rather have them available to view via a cloud service of some kind.
Anyone have any experiences to add?
Regards
Chris

Is it possible to extend the title of a "DATE" column?

Hi I have made a table;
SQL> SELECT * FROM BookCopy;
BCID BTID DATEACQUI DATEDESTR
120 9 09-FEB-06
But the title is meant to say "DATEACQUIRED" but it only says "DATEACQUI"
Does anyone know if it is possible to extend the title without using VARCHAR, thanks

Hi,
In SQL*Plus, you can set the width of a DATE column the same way you do it for a VARCHAR2.
COLUMN dateacquired FORMAT A12
SELECT SYSDATE AS dateacquired
FROM dual;produces
DATEACQUIRED
29-JAN-09

T-code that resets the counts in the storage bins

hello,
is there any T-code that resets the counts in the storage bins.
As we do our weekly counts it keeps a running total of how many bin are completed and allows us to track the warehouse's progress.
Regards
Goutham

Of cource, very sorry to waste your time,
I didn't even notice LOL
But your question is a easy question so I am sure some one will respond with a good answer for you.
our program name is RLREOLPQ
not sure if the program is custon or just t-code
gl
Edit: may be a bad sign for you, maybe no standard t-code if we had to create a custum one
Edited by: Arakish on Apr 1, 2010 10:32 PM

Need to enter the storage bin manually

Hi Team,
Currently while posting the IM movement type 311, storage type(FIFO) search strategy is configured for stock removal process.
Now the requirement is for certain materials, while doing the transaction, we don't want to pick the bin automatically(by using the FIFO), we want to enter the Storage bin manually, please suggest.
Advanced Thanks,
AN Reddy.

Hello A.N Reddy,
There is a confusion here. Are you talking about WM or EWM.
If it is WM, then, I would suggest you to enable, Manual Storage Bin Input for respective WM Movement Type in WM Movement Configuration. That will request you to enter Storage Bin Manually during TO Creation.
If it is EWM, For your process type, Make Search Seq field as Blank and keep your Putaway Rule as " No Putaway Rule ". This will request to you to enter the storage bin Manually during Warehouse Task Creation Process.
In EWM Outbound Process, you have to empty your search criteria in your Pick Rule.
Regards,
Sathish

Date of last inventory for the storage bin

Hello,
We would like confirm that when use the T-code LX26 for Carry out Inventory using the Cycle counting method.
Date of last inventory for the storage bin i,e. date when inventory was last taken in the Warehouse number for a any storage bin shows as 00.00.0000(It is not displaying the any date).
Whether this is a System standard behavoiur or Any other reason.
Please guide me waiting for your reply.
Regards
Sarin.

Hi,
Thanks for your reply.
I have checked in the Field,it showing in the Field.
In T-code LX26 if i take a report for entire WM number it show for some of the Old Inventory date for the some of material
You mean to Say bins were not taken into account for the cycle counting.
How it will be,there is any reason for this .
I am waiting for your reply.
Regards
Sridhar

Is it possible to extend the TSM component's expired date?

Dears,
Is it possible to extend the TSM component's expired date?
Thanks!

Definitely it is possible, however, it is unlikely this feature would be implemented in ME 5.2 but rather in further releases.
And someone should contact e.g. Consulting team to "submit the request".
Regards,
Sergiy

Is it possible to extend the range of one airport express with a second airport express?

Hi,
We have a Time Warner router and have it hardwired to an Airport Express. Is it possible to extend the range of that one airport express with a second airport express?

... The new AirPort Express that I have is an 802.11n version, but the second one is an older model and I don't know which version it might be. Also, the system recently updated so I'm using the AirPort Utility 6.1.
If you are using Mountain Lion, AirPort Utility 6.1 is the version installed by default. It will not be able to administer "older" AirPort base stations.
For them, use AirPort Utility 5.6 which contains the features you need. It can administer your older Express as well as current production base stations.
AU 5.6 is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion.
This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
Download Pacifist here: http://www.charlessoft.com/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder. It will run without complaint. It is only the package installer that is the problem.
Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
Note: For those with Leopard or Snow Leopard systems you need AirPort Utility 5.6.1 (this is confusing - a later AirPort Utility version for an earlier OS X version - but it is correct).
Download AirPort Utility 5.6.1 here: http://support.apple.com/kb/DL1536

I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too..

I have a Cisco/Linksys WRT-54G wireless router and 2 Airport Extremes (the small ones that plug directly into the wall). Is it possible to extend the network from the router using these two AEs? I have a DVD player and Ext HD plugged into the router too. Any ideas? I'm guessing the only way is to do what I've seen in these community pages which states that it can be done but it will drop the bandwidth by 50%. Thoughts?? Thanks!

The Cisco/Linksys WRT-54G was one of the very few routers said to be compatible with Apple's implementation of WDS (Wireless Distribution System) settings.
The info that I have on file indicates that only the WRT-54G versions 4 and under were compatible, so that would be one bridge to cross.
Even if you find that your Cisco/Linksys might be the right version, Apple never published instructions on how to configure the Express devices with other manufactures, so users were left to their own devices to try to figure out how to get things working. Apple's instructions to connect to other Apple devices are in the link below:
WDS network
If you were hoping to use 2 Express devices in this type of configuration...even if it works...the bandwidth penalties will be extremely severe.
The first Express drops the bandwidth (and speed) on the entire network in half and the second halves everything again. So, the result, in effect would be a "g" wireless network running at 25% speed. Few users would consider installing this type of network.
At this point, it becomes one of those things where the fact that you might be able to do something does not mean that there would be much value in doing so. But, it is your decision to decide if you want to try to proceed.

Transport the created Storage Bin Automatic from develop to quality LS10

Hello,
My customer has created a new entry in LS10 u2013 Create Storage Bin Automatically in the development system with a transport order.
He forgot to do Environment u2013 Create bins. I did it with my user in the development system and SAP has created the bins automatically (the system creates and launch a batch-input). The system did not ask me for a transport order (I think because this created data is master data).
The user has transported the transport order from development to quality system but the Storage Bins are not in QAS. I told to the user that the Storage Bin are master data and we has to do Environment u2013 Create bins in each new environment but LS10 transaction has status 'not modifiable' in quality and production system.
There is a way to transport the created Storage Bin Automatically from development to quality and production? Now the user is asking me to have the Storage Bins in quality and production with access LS10 in status 'not modifiable'.
Cheers,
Marta

I could not transport them but I have created the storage bin directly in QAS with LS05 because LS10 is not available.
Thank you very much.

Is it possible to show the shell in linux from exec

my app needs something to be installed on the client pc. It downloads the file and then install its automatically. For win this is working, fir the linux not, i can set the permissions, and when i try to launch it like
String[] commands = {"/bin/sh","filename.bin"};
Runtime.getRunTime().exec(commands);
it starts, but it hangs. I think it's possible due to the fact that's there a license agreement in the bin file. when i true to install it manually, from the shell, it shows me the license agreement. i think that linux is waiting for input from the user and my prog hangs. so Is it possible to show the shell in linux from exec ??? so that the user can see the license agreement

it is in fact the same as the bin file for installing
java, when you extract that you see the license
agreement and the user has to press enter to go on,
that's the only input.
You're right, i should read the out and err, i
forgot, stupid of meYou have to send enter to the input stream of the process in that case.
Kaj

Is it possible to call the Print Quote functionality from Custom ADF page

Hi,
We are researching if it is possible to call the Print Quote functionality from the Custom ADF application.
Goal is to pop up the PDF report upon clicking the Print Quote button on the custom page. Is it possible ?
Atleast advice on the direction to go forward is appreciated.
Thanks
Sai

Hi ,
Please check following thread on forum -
Re: ADF: Calling OAF Page from ADF page
Check this may also be useful-
https://blogs.oracle.com/shay/entry/to_adf_or_oaf_or
I have not tried yet but Steven Chan (Sr. Director OATG) suggest following methodolgy for this-
https://blogs.oracle.com/stevenChan/entry/appsdatasource_jaas_ebs
Thanks,
Ashish

How to delete the items in the recycle bin permanently from the windows using Diruse command

How to delete the items in the recycle bin permanently from the windows using Diruse command.
Because most of the time we get out of disk space issues.
Can somebody help me in giving with an example

You can right-click Recycle Bin|Properties and choose radio button for
Don't move files ....
This one may also help.
http://technet.microsoft.com/en-us/library/cc784980(v=ws.10).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

B2B EDI translation ----Is it possible to increase the sub-element length

B2B EDI translation ----Is it possible to increase the sub-element length??
Am new to the B2B 10g- EDI Integration environment. In our production setup, am getting the following error.
B2B EDI Translation failed, because one of the fields was too long. The length of Sub-element length is '41'. The maximum allowed length is '35'.
In the segment RFF defined in the guideline at position 0070; Is it possible to increase / expand the lenght from 35 to 41.....
Thanks and Rgds,
-Srini

Hi Nitesh
I have the same problem what srini explained above.
I'm using Oracle B2B Document editor.
That corresponding element's field is in disabled state ,a red triangle displays in top right corner of that field.
Could you help me to solve this issue?
Regards
Kathir

Is it possible to delete the boot/startup volume from Terminal

Is it possible to delete the boot/startup volume from Terminal?
What sort of command would/could allow this?

Is it possible to delete the boot/startup volume from Terminal?
Do you mean is it possible to destroy your system from the Terminal? Anyone that has spend long enough working with Unix from a command line knows that answer. Yes! And a painful lesson it has been for many of us.
The real question is, what is your goal?
If you just want to erase lots of files, then the 'rm' command is available. Once all the files are erased, the rm command will be one of them, and so that is the end of the game. You will not be able to execute any more commands. The file system is still there, and the data in all those files is still on the disk, you have just eliminated the easy way to access that data (via file names).
If you want to initialize a new file system on the disk, you could most likely do that (diskutil - it will be the last command you run from the terminal, but you could most likely do it). Again, the data is still there, but the file system structure that held all the names and allocation information has been eliminated.
If you want to securely erase the disk, that is also possible (diskutil), and again, that will be the last command you will run from the terminal. Now nothing is left behind, neither data nor file system structure.
What sort of command would/could allow this?
rm and diskutil come to mind (in combination with sudo).
You could also just boot from the installation DVD, and then from the Menu select the Disk Utility and erase the disk as well as give it a new file system. And since you are running from the OS stored on the DVD, you can do other things after the Disk Utility is finished.

Is it possible to Extend the Storage Bin Length from 10 Char to 25 Char

Similar Messages

Maybe you are looking for