Is it possible to face time with 3 different people at the same time?

Check out GoToMeeting http://tinyurl.com/k6q84kw
 Cheers, Tom

Similar Messages

HT204380 Can you FaceTime two different people at the same time?

Can you FaceTime two different people at the same time?

No, not at this time. Feedback to Apple goes HERE, and click on the appropriate section.

HT4534 Can I facetime a group of people at the same time?

Can I facetime with several people at the same time?

Hello,
I found this forum post which may be helpful to you. It looks like you can't receive from the two antennae in the way that you describe. I think this would require a two USRP setup.
Jon F.
Applications Engineer
National Instruments

Is it possible to realize two different processes in the same time with TDMS?

Hello all,
we have one TDMS but a lot of workstreams. Is it possible that 2 different workstreams in the same time realize anonymization in TDMS?
Thanks in advance!!!
Ilkin Mammadov

Hello Anita,
I am sorry.I mean we have a lot of projects (for example Procurement, Finance, Logistics, etc) and each of them wants to anonymize. But it is existing just one TDMS. Can these projects start with anonymization in the same time or they have to wait till one of projects finished anonymization?
Thanks in advance!
Best regards,
Ilkin

Collecting data from advantech-usb4704 with two different apps at the same time

I wonder if I can access to Advantech-4704 with two different applications at the same time?
I use this block in my vis.
I have enough ports, but inputs are needed in completely different applications. Do I have to close one of them or can they run simultaneously?
Thankyou!

Dear gtu,
as nathand said, usually it is not supported to access the same physical resource simultaneously from multiple programs. In case of DAQmx for instance, you will get an error message which says that the resource is already reserved. I suppose the same would happen with your driver, however it might be worth a try.
One workaround could be however if you revise your applications and merge the codes if it is possible so that no concurent resource allocation takes place.
Best Regards,
Adam Cseh
Applications/Systems Engineer
National Instruments

How to export 2 different report with a link at the same time

Hi,
Do anybody know how to export 2 different report with a link at the same time. I currently create a report which link to another report. But when I want to export the 1st report I also want the 2nd report also be exported.
Thank you very much.
Best Rgds,
SL Voon

Export all the three components individually.
It will generate 3 script files. Now run them from SQL>
null

Controller different Input in the same time in a real Scenario...(SIMULATION IN 2 TANKS CONTROLLER BY PCB BOARD)

Hi! I really need help....
I´m doing a simulation where I can controller the input and output with one external PCB, all is working properly (the communication) but my problem is, I can´t open where ever I want the different valves...I mean, I must wait until the process is finish...
The program is working with diferents process like this:
§Process 0:
Programinitialization. Tanks and pipes in zero state. Control for this state with “pump on” button.
§Process 1:
§State:
“ Pump on ” button istrue: Pump 1 isrunning, andTank 1 starts to be filled with water.
“ Pump on ” button is false: nothing happen, go to the next process
§Process 2:
This process is controlled from the “Control 1”button with is who control “Valve 1” for the discharge of water from tank 1 to tank 2.
§Process 3:
This processiscontrolledfromthe “Control 2 ”button with is who control “Valve 2” for the discharge of water from tank 1 to tank 2 if “Control 3 ” button is close or if “Control 3 ”button is open the water go out from the loop.
§Process 4:
This processgiveyoutheoptiontocome back totheprocess 1 ortotheprocess 2 dependingofthestate in process 3.
So my problem is I want run different processes in the same time, without having to wait out the current process is running....
this look like this:
and with the differents states...so I was trying to use a Statechart for try to improve the simulation....
like this:
But when I was tried to implement in labview with the statechart module i can't find the way to interconexión with this new module...
Because i need two differents regions...but i can't use the connexion between them....
Some new idea, help....all is welcome!!!
Thanks in advance.
Elena

Buenos días Alvaro,
Si, mejor en español
Si, me has entendido bien, exactamente es lo que me gustaria.
Empece por mi cuenta con labview y hay muchas cosas que se me escapan... Voy a implementar la máquina de estados a ver si asi soluciono el problema.
Muchas gracias!
Un saludo!

How can I share the home folder with different accounts on the same mac?

Hi, here's a question:
How can I share the home folder with different accounts on the same mac?
The whole point being not to have to install all my apps, and move all my files each time between users.
The second thing would be to be able to modify one document on one account, and have it changed on the other account without having to copy it.
I would like to have a pro and a private account on my mac.
Thanks for you answers,
Doug

Your apps should not be installed in your home folder--they should be in /Applications where every user can access them.
If you want to share things between users on the same Mac, use the /Users/Shared folder. Keep your home folder private. Trying to defeat the protections on the home folder subfolders just gets messy. I've never bothered to figure out all of the problems associated with it so I can't explain how to do it.
Even with using Shared, you would need to alter the ACLs on the shared folder in order to allow both users to modify the documents.
You must create a Group in Users & Groups and put each user in that group. Then create a folder inside /Users/Shared where you want to share the various files.
Then, add an ACL to the shared folder that gives the group special permissions. on that folder.
sudo chmod -R +a "<sharinggroup> allow delete,chown,list,search,add_file,add_subdirectory,delete_child,file_inherit,directory_inherit" /Users/Shared/<sharing folder>
Replace <sharinggroup> and <sharingfolder> with the name of your group and your folder. Then, run the command in the Terminal.
With that ACL, each user in <sharinggroup> will be able to alter the files created by any user in the group in that <sharingfolder>.
Essentially, the client OS is not designed for true file sharing among the individual users. It is designed to isolate each user account from the others.

How Can I generate 2 different WaveForm in the same time

Hello,
I use a NI 6733 card and measurement studio 8 with MFC class.
I would like to generate 2 different waveform in the same time on 2 diffrent analog output channel.
I would like to know how can i do that bescause I succeed to generate one wafeform on one channel but not the second.
I would like to create 2 task one per analog output channel and waveform and launch the task in the same time.
I use the buffer FIFO and I think I have a probleme to share the buffer between the to different channel.
thank you for your attention.

Hello,
This corresponds of the third case detailed in this KnowledgeBase. You have to use one task with two channel, and feed it with your two independant waveforms (at the same sampling rate).
Cordially,
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.
  CTD - Certified TestStand Developer / Développeur TestStand Certifié
  CLAD - Certified LabVIEW Associate Developer

How to control more than one instrument via different interfaces at the same time

Hi, I am new to Labview. I am working in a project where I have to make a Automated testing tool . So, here is the set up - I have a Chip on a board to which there are several instruments connected namely Agilent power supply, Agilent pattern generator, oscilloscope,Dmm and Thermotron. All these instruments will be connected to the host computer via ethernet, GPIB or RS232. I have to write a program on Labview where the program should be able to communicate with these instruments at the same time and show the ouput on display unit . I have to run the program once, should be able to view the ouputs. So, Is it possible to write such program in Labview??. I have downloaded few instuments drivers. Is it possible to combine those intrument drivers and construct a new VI which would be able to control all this ?? Will it be easier to program this on Labview or I should go for Labwindows/CVI ??.
Please mention some useful sites or tips (if u know) for writing program.
Thanks in advance
shasanka

Hi Shasanka,
ofcourse it's possible to control more than one instrument at a time.
You should use the VISA routines to access all your devices. Every device get it's 'address' as 'VISA resource name'. This resource name contains information on the used bussystem and the (internal) device address (i.e. GPIB devices have an address number).
So I suggest to read the manual and to look at the examples that come with LabView!
And (from your question) it seems you should take the 3 or 6 hour seminar as well! (Look at www.ni.com -> academics.)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Apex mixes applications working with two windows at the same time

Hi all, while developing in Apex I have found the following problem:
Working with two different applications at the same time, the browser goes from one to another indistinctly.
To reproduce the problem:
1. Open the same application builder in two different Firefox windows
2. Open a different application in each window (In my case: application 103 in window1 and application 105 in window2)
3. Go to shared components in both windows (window1 first)
- window1 breadcrumbs show: Home > Application Builder > Application 103 > Shared Components
- window2 breadcrumbs show: Home > Application Builder > Application 105 > Shared Components
4. Click in any shared component in window1 (Templates, Authentication Schemes...)
- window1 breadcrumbs show: Home > Application Builder > Application *105* > Shared Components > Templates (Application 105 instead of 103)
Is it a bug? I have read the known issues [[Here]|http://www.oracle.com/technetwork/developer-tools/apex/downloads/apex402knownissues-189793.html] but it does not appear.
Related Data:
Application Express version 4.0.2.00.07
Firefox 3.6.15
SO: Windows XP
The error is not reproduced with IE7. I have not tested any other browser.
Regards,
Molina

If you tried opening up two pages in the same application each of which modifies the same page items, you would notice the same issue.
This is because, in a session there is only one set of values for page items(or application items) and every parallel call to the same page would update the same bind variables.
Now the development environment or Apex Builder is also an apex application , and when try and open up the pages as you mentioned, they both access the same Application Builder page and sets/resets any existing values for those variables(and maybe cookies too if they are being used) , hence the 'mixing up'.
If that didn't convince you, check the URL of both the pages when you load them, they should show the same page number ( f?p=APP_ID:PAGE_NUMBER syntax). Imagine if the same approach was done with one of your application pages, say an edit form opened from a report with multiple records in multiple tabs like what happened with this case: {message:id=9346663}
So this really isn't a bug in a way, because that is how session states in apex is/was maintained. Ofcourse if they used another kind of development platform for building pages, it may have been avoided, but thats an altogether different point in itself.

Time Division Multiplexing and Processing Different Loops at the same time

Hi, I am new in Labview so you may find my questions too silly, sorry about that
I want to design an interface to control the test&measurement devices remotely. I have two desks and there are several devices on these desks. The real problem is to use two different devices at the same time. To do this I heard that I can use time division multiplexing. But I couldn't find enough information about it in Labview. Another advice I heard was to use a matrice and hold the on/off state of the devices in this matrice.
Where should I start the design to create such a system? Do you have any advices? Thank you in advance.
My basic GUI is attached.
Attachments:
InterfaceAli.zip ‏42 KB

As Mike pointed out you cannot communicate in parallel on the GPIB bus - unless you have separate buses for each instrument - and that defeats the purpose of a bus. I am not sure about LXI.
With regard to your VI:
1. Do not use global variables to pass your data around.
2. You should use the Array data type, not the Matrix data type. The Matrix data type in LabVIEW should only be used for matrix mathematical operations (linear algebra) which cannot be easily performed on the array data type. You have many more tools in LV to work with arrays.
3. The Event structure needs to be in a parallel loop. This is basic data flow. If you do not understand this concept, get some training, either though the online tutorials or through a class.
4. Use Value Changed events and place the button terminals inside the event case for that control.
5. The parallel loops need to have a Wait or some other function which causes a delay. Otherwise, the first one to start executing could consume all available processor resources. These are called "greedy loops."
6. Use integer data types for case structure selector inputs. Floating point values are coerced to integers at the inputs. If the values resulted from calculations, unexpected rounding effects may occur, resulting in the wrong case being selected. In some cases using type defed enums may be even better. The underlying data is integer and the enum item names show up in the case selector labels, helping to document what the case does or why it was selected.
7. Remove the timeout case from the event structure since it never executes. Also avoid Use Default if Unwired on the terminal with your matrix (array) data. You never have a situation where an empty array is appropriate.
Before going any further with the program questions, you need to carefully define your requirements. How many instruments will you have? How many can be active at one time? What kinds of communication between the program and the instruments is required? This includes commands to the instrument, data returned from the instrument, error handling, and timing requirements. What will be done with the data? Display, save to file, use to automatically control another device? What safety requirements or constraints need to be met? Once you have a good requirements document, then you can begin to determine what kind of program architecture is best suited to meet the needs.
I suspect that you may be making some things much more complicated than they need to be while ignoring other important issues.
Lynn

Unable to copy database with different name in the same instance

I had a huge database and wanted to try some change optimization changes.
So wanted to make a copy of the database along with data in the same instance.
I have tried copy database wizard several times but always see the error as in attachment.
Can someone let me know how to troubleshoot further?
If this is not the correct way please suggest how do i copy a database with different name in the same instance along with data.

Hi Nandu,
From the screenshot, the error 1813 happens when corrupt database log is attempted to attach to the SQL Server. To work around this issue, please preform the following steps, for more details, please review this
blog.
1. Create a new database with same name which you want to recover. Make sure that the MDF file and LDF file have same name with previous database data and log file.
2. Stop SQL Server. Move original MDF file from old location to new location by replacing just created MDF file. Delete the LDF file of new location just created.
3. Start SQL Server. At this point, the database is in suspect status.
4. Make sure that system tables of Master database allows to update the values. Please note that you will be performing this in query window.
Use Master
go
sp_configure 'allow updates',1
reconfigure with override
go
5. Change database mode to emergency mode.
SELECT *
FROM sysdatabases
WHERE name = 'DatabaseName'
BEGIN
UPDATE sysdatabases
SET status = 32768
WHERE name = ' DatabaseName '
COMMIT TRAN
6. Restart SQL Server. Then execute the following DBCC command in query window to create new log file.
DBCC TRACEON (3604)
DBCC REBUILD_LOG(databasename,'c:\yourdatabasename_log.ldf')
GO
7. Reset the database status using following command.
sp_RESETSTATUS yourdatabasename
GO
8. Turn off the update to system tables of Master database running following script.
USE MASTER
GO
sp_CONFIGURE 'allow updates',0
RECONFIGURE WITH OVERRIDE
GO
9. Reset the database status to previous status.
BEGIN
UPDATE sysdatabases
SET status = (value retrieved in first query of step 5)
WHERE name = 'DatabaseName‘
COMMIT TRAN
GO
Make sure that you have done all the steps in order and restarted SQL Server where it is mentioned. Also run SQL Server Management Studio as administrator.(Right click-> Run as Administrator)
Thanks,
Lydia Zhang

Is it possible to open 2 books in iBooks at the same time?

Is it possible to open 2 books in iBooks at the same time?

You can only have one book open on-screen at a time, and you will need to go back to the bookshelf to select and re-open the second book. If you have the second book from a different store so that it's in a different app (e.g. an Amazon purchase in the Kindle app) then you could switch between then two apps/books via the iPad's taskbar - but you won't be able to have both apps open on screen at the same time.

Invoice posting with different currency for the same PO

Hi,
Can we post the the Invoice with different currencies for the same PO.
For example.
PO has Qty 100 pcs. amount 100 USD
GR Qty 100 pcs.
Is it possible to post Invoice of 50 pc with 50 USD, and 50pcs with some other currency.
Any sugggestions pls.
Thanks,
Satya

Hello
As per my knowledge, that is not possible.
And in whjat scenario, we need to do that?
In MIRO header itself we have the vendor currency, so it is not posbile to maintain different currency in different line items in MIRO.
If you want, you can do MIRO in different currency that what is in PO.
In the example given, you have o post 2 invoices, one for 50 qty in USD and the other 50 in different currency in other invoice transaction by giving the currency in basic data-invoice header and then only press ENTER after giving the PO number.
Hope this helps
Regards

Is it possible to face time with 3 different people at the same time?

Similar Messages

Maybe you are looking for