Is it possible to fade music on a slideshow in iMovie when using an iPad?

I am trying to make a slideshow for a friends wedding. I have the entire slideshow ready, but I can't figure out how to get the music to fade when going on to the next song. Help!

I hope you won't see this as rude, but what you are missing is the obvious point that Adobe are in business to make money. So they put as little in Adobe Reader as they can, so people are motivated to buy stuff. Every development intended for Reader has severe limitations on feasibility and techniques for this reason; it's a huge (but very common) mistake to just develop for Acrobat and assume Reader will follow.

Similar Messages

  • Is it possible to transfer music between iPhones and iPods with out using iTunes

    Is it possible to transfer music between iPhones and iPods with out using iTunes

    Nope.  Both require iTunes on a computer to sync music from.
    Unless the iPod is an iPod Touch and the music was bought from iTunes.  In which case the Touch can simply go to the iTunes App, under Purchased  and download the purchased songs for free.

  • I would like to store my music files on a external harddrive  when using itunes instead of using my internal drive but cant seem to configure the macbook to do this. can someone tell me how ?

    I would like to store my music files on a external harddrive when using itunes instead of my internal drive but can't seem to configure the computer to do this. can someone tell me how ? .

    Copy the entire /Music/iTunes/ folder to teh external.
    Hold Option and launch iTunes.
    select Choose library... and select the iTunes folder on the external.
    Make sure the external is connected and ready before launching iTunes.

  • HT201320 When using an iPad Air, is it possible to have my email removed from the server after downloading it? That's what I have been doing on my PowerBook and I would like to use my iPad as my primary email reader now.

    When using an iPad Air, is it possible to have my email removed from the server after downloading it? That's what I have been doing on my PowerBook and I would like to use my iPad as my primary email reader now.

    OK, I found the answer in the mail settings under the advanced button.

  • HT1296 Is it possible to extract music from an X terminal hard drive to an iPad

    Is it possible to extract music from a next journal hard drive to an iPad

    Load the content in question into iTunes on your PC. Once you have finished...
    Connect the iPad to your PC and synch it with iTunes.
    http://www.apple.com/support/ipad/syncing/

  • Is it possible to print wirelessly (WITHOUT A WI FI INTERNET CONNECTION) .Using my ipad 3 to an HP air printer.

    Is it possible to print wirelessly (WITHOUT A WI FI INTERNET CONNECTION) using my ipad3 and a HP air printer ?.

    Christina,
    The purpose of the AirPrint system was to permit printing directly from iDevices to printers that are AirPrint enabled without going through an intermediary device.  The catch is the printer must be an AirPrint enabled printer.  The iPad's apps will then recognize the printer and print seamlessly.  Follow the link Demo gave you to see the specifics from HP since that is the printer you asked about using.

  • Is it possible to move music to iTunes on a new Mac using my iPod?

    Could I move music to iTunes on my new Mac by plugging in my iPod?

    Um, maybe but not really.  Many people make the mistake of using their i-devices as backup, but it really isn't set up to do it that way.  For one, you can only copy media purchased from Apple from an i-device to a computer.  Second, your library as you see it on a computer is structured by many files and folders which are not present on your i-device.  It would help if you provided a fuller scenario as to why you wish to do things this way.
    Moving a library: Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its sub-folders and files) intact to the other drive.  Hold down the option (alt) key (shift on Windows) and open iTunes.  At the prompt to create or choose a library choose the copied iTunes folder.

  • Music  does not play on Iphone when using the Remote app for Itunes , is this normall.

    Hi all,
    I am using the remote App for ITunes on my IPhone 5,I can get the phone to operate
    ITunes perfectly but there is no audio coming from the phone, I am having a party and I
    want to play the same playlist  throughout the house without having it up at full volume.
    I was hoping to leave the laptop downstairs and plug the IPhone into a stereo upstairs.
    If this is normal ...........
    Is it possible to load the playlist on to 2 computers , and have them playing the same music
    simultaneously.
    Any suggestions please

    See http://discussions.apple.com/thread.jspa?messageID=9926596

  • Is it possible to control the order that text flows appear when using them as text insets?

    I want to create multiple flows in a FrameMaker file which I can then insert as text insets. I would like to choose the inset using the Body Page Flow: dropdown list. However, there seems to be no order, alphabetical or otherwise, in which these flow appear in the drop down list. Is it possible to control this order, or is there a particular reason it appears the way it does?
    Cheers,

    IIRC, the flows are displayed in the order that they were created.

  • Is it possible to silence the external ringer on the Pre when using headphones?

    When I get a call on my Pre while using the headphones, I'd like to hear the ringer in my headphones only... Currently when I get a call it rings in the headphones AND via the external speaker. Can this be done and if so how?
    Post relates to: Pre p100eww (Sprint)
    Message Edited by hammerransom on 07-14-2009 11:16 AM

    Karl Z wrote:
    Hi,
    I produce a large number of pages in InDesign.
    In each document there are 5 layers. 1 layer with images and 4 layers with language-editions.
    For safety and quality control I would like to print out the layer name together with the crop-marks.
    Like... Documentname / page number/ layerImages - layer language
    Is that even possible? That is...without me having to write it myserlf in the bleed. :-)
    /Karl
    InDesign's pasteboard, bleed, and slug areas are independent for each document page. Running header text variables in these areas can capture sources on document pages. If you place a text frame with a character style for the layer name, and a character style for the language name, on a layer, and capture them in a character-style-based running header in the slug, for example, the source from whichever layer is visible will appear in the running header in the slug area. Similarly, you can capture other text variables for page number, filename, date/time, etc.
    It may take a little fussing to set it up the first time, but thereafter when you change layer visibility, the visible layer name changes automatically.
    NOTE: Text frames on master page pasteboards, bleed, or slug areas do not appear on document pages unless they also touch the document page border.
    Above: Master page view
    Above: Page 1 view
    Above: Page 2 view
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices
    Message was edited by: peter at knowhowpro

  • Tempo of music slows down after a while when using IPod Shuffle

    I started running with my IPod shuffle,
    and I noticed this glitch, that everytime that I go running,
    after a couple of minutes (5-10 minutes), the music starts slowing down,
    and let me say that the battery was full when this happened.
    help please?

    I think so, This IPOD is not exercise friendly, I had exchanged my earphones twice, and used a set of earphones without the controls, after 20 min in a run the thing just stopped, I charged it before I left, I think this is a moisture problem.

  • Is it possible to set default column widths in list view when using a finder window in Mavericks?

    The default 'document' column is way too wide and forces you eye to track all the way across the screen to read info like "date modified', 'kind' or 'size'.
    Tried several times to create a narrower default 'document name' column with no results. Couldn't find anything in preferences or view options. Tried dragging column headers while holding the down the option key with no results. 
    Every time I open a new finder window, all columns except the 'document' column affixed to the right side of the window. Also, when you grab the bottom right corner of a window to resize smaller, the lists become re-affixed to the right side of the window when opening the window back up.
    Experiencing the same problem in Mavericks 10.9.3 on an iMac and Macbook Pro Retina.
    Thanks if you've made it this far:)

    This was a great place for me to start
    Thank you
    I took profdant139's suggestions a bit further as my real goal was to have the "Document column" narrower. The goal to be able to see all the other document info that was usually hidden way out to the right
    To achieve my results I right clicked in the upper bar with the column names and chose from the drop down box "comments" column (as suggested). I then dragged it to the far right. This pushed all the other columns over.
    In the end of the day I ended up adding "Size" and "Date modified" columns as well to get my desired results.
    Remember one can move different columns around to be in the order you need by clicking on the column to get it active and then left click and drag it to where you want
    Another great thing is that by default (Using Mavericks) the date modified, opened,created columns have date and time. One can shrink them down to xx/xx/xx format by manually adjusting the column width like one does in Excel - click on column separator up top and drag
    Once all that is done, at least on my box, I closed it out and opened up a new finder window and everything was as I wanted.
    Thank you for the help  from the above helper to get me here

  • Hi, is it possible to create a page transition similar to jquery when using a 'nav to' button?

    I am creating an iPad app and wish to have a menu from which when pressed will take the user to other pages within the same app. For this I am using a 'navto://' URL button with the file name and page number following within the code (e.g. navto://filename#1). In the Folio overlay preview, the desired page transition effect similar to jquery occurs but this is lost when uploaded to the iPad. Does anybody know if you can control the page transition effect?

    What folio overlay preview are you talking about? There are no page transitions in DPS.
    Bob

  • Music has skips on local speakers when using remote speakers via airtunes

    Using airtunes connected to a stereo the computer (Windows media center) "skips" like a bad CD but the remote speakers never do. Turning off multiple speakers and the skipping goes away. Have upgraded software, wireless router, and airport but have not found anything that resolves the issue. Using iTunes 6.0.4.2
    Intel DUO core   Windows XP   Wireless router is a Linksys
      Windows XP  

    Hello ecolman,
    The article linked below details a number of troubleshooting steps that may help restore functionality to the Remote app.
    Remote app for iPhone, iPad, or iPod touch can't connect to iTunes or Apple TV
    http://support.apple.com/kb/TS1741
    Cheers,
    Allen

  • Is it possible for a guest system to spy host system when using virtual maschine?

    Hi all,
    I want to prepare virtual maschine which will be used to connect through vpn with one of my clients. There are some other programs and devices that I have to install in order all of this to work. However there is a security concern. On host system I've mailbox and other stuff from my corporation. Is there any way
    that guest system will successfully try in any way to monitor what is happening on host system (for example by reading emails, checking network trafic, doing screenshots and so on)?
    any help appreciated

    Welcome to the Community - No -  The VM runs isolated form the host machine

Maybe you are looking for