Is it possible to find out if a certain type of document is available inside a document-set by the help of workflows?

Hi,
According to your post, my understanding is that you wanted to find out if a certain type of document is available inside a document-set.
Per my knowleadge, there is no out of the box way to accomplish this with SharePoint Designer Workflow.
To find the content type inside a document-set, there are two methods:
First, open a document set, click “New Document” option, then you can find the available content type in the document set.
Second, open the document set content type, open Document Set Settings Page, then you can see the available content type.
More information:
What is Document Sets in SharePoint 2010?
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Similar Messages

Is it possible to find out the names of the various objects (jpegs, pdf's, etc) in a keynote presentation?

I have to re do a keynote presentation for powerpoint -- the export feature won't work on the pc -- it simply says that it wasn't possible to display some of the text and objects because they had become corrupted, and were replaced with blank slides. I was wondering if it's possible to find out the names of the objects used in the presentation. That way I could save them to a folder and just paste them in to the PPT version on the PC. I know they have to be somewhere on the Mac that the presentation was made on, so is it also possible to find out where they would be?
I tried right clicking on the objects in the slide, but there was no 'get info' option, like there is in a finder window. Please help if you can.
Chris

There are a few options for you here. In the Inspector>Metrics Tab, when you click on the picture, it will display the name. Then you can use the find feature of the Finder to locate the picture. If you have Keynote set to save files as Packages, you can right click the file in the Finder (or control click) and then select Show Package Content. This will show you all the files that make up your Keynote and you can copy the pictures out of there into a new folder. Finally, if you can't find them any other way, you can select and copy the picture in Keynote, then open Preview and command-n (or File Menu>New from Clipboard) and then save the file to where ever you want so you can find it.

HT5594 I have lost my I phone5 amd I have enabled lost mode. But still I can't find out where it could be and I cloud search gives offline signal. If the thief turns on my phone is it possible to find out my phone or given any signal for me?

I have lost my I phone5 amd I have enabled lost mode. But still I can't find out where it could be and I cloud search gives offline signal. If the thief turns on my phone is it possible to find out my phone or given any signal for me? is it possible for the thief to use or sell my I phone even it is on the locked mode by ICloud?

If it is turned on and your lock request is able to be fulfilled, a confirmation email will be sent to your Apple ID email address. There isn't any known way to bypass Activation Lock on your phone so no one will be able to use it. More information on Lost Mode: http://support.apple.com/kb/PH2700

Someone puts iTunes Store purchases on my credit card !!! I took the last purchase from my account in 2009, is it possible to find out which account abuses my credit card?

Someone puts iTunes Store purchases on my credit card !!! I took the last purchase from my account in 2009, is it possible to find out which account abuses my credit card?

Follow the instructions here > How to report an issue with Your iTunes Store purchase
And if you have not already done so, change your Apple ID password ASAP > Apple - Support - Apple ID

Is it possible to find out whether cookies are disabled in a browser in JSP

Is it possible to find out whether cookies are disabled in a browser in JSP?
Is there any code for that?

This script checks to see if the user has cookies enabled and if they don't give them a pop-up box telling them they must enable them. The alert message has to be all one long line in order to work.
<script language="JavaScript">
document.cookie='CookiesEnabled=1';
if (document.cookie=='')
{alert('Please enable your cookies in order to continue.');}
</script>

Is it possible to find out which user was used to delete the job?

Is it possible to find out which user was used to delete the job?
Any logs?

Hi,
You can find who are the users who executed sm37 in ST03N.
This might also help you in analyizing.
Regards,
Vamshi.

Is it possible to find out the program having the paramters?

Is it possible to find out the program having the paramters? if possible can you give the query

Search the forum/Google and you should get many hits (like the ones below).
Write a QUERY of Concurrent Program
Write a QUERY of Concurrent Program
Query to get Concurrent program name and its parameter
http://sureshvaishya.blogspot.com/2008/07/query-to-get-concurrent-program-name.html
Query to list concurrent program details with its parameter, values set and default value/type
http://www.knoworacle.com/2010/12/query-to-list-concurrent-program.html
Thanks,
Hussein

Is it possible to find out since which date do I h...

Is it possible to find out since which date do I have an account on skype ? And how?

please contact Skype customer service
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

How to find out what kind of type a file is?

hi there!
does andbody know if it is possible to find out if a file is a picture?
Example: i have a file, with no extension. How can i know, if this file is a gif or a JPG?
thanx for your help!
jules

Rename it "mypic.gif" or ".jpg" and load it.
Alternatively, dig out documentation on the format of Unix file magic files, and decode # GIF
0       string          GIF8            GIF image data
4 string 7a \b, version 8%s,
4 string 9a \b, version 8%s,
6 leshort >0 %hd x
8 leshort >0 %hd,#>10    byte            &0x80           color mapped,
#>10    byte&0x07       =0x00           2 colors
#>10    byte&0x07       =0x01           4 colors
#>10    byte&0x07       =0x02           8 colors
#>10    byte&0x07       =0x03           16 colors
#>10    byte&0x07       =0x04           32 colors
#>10    byte&0x07       =0x05           64 colors
#>10    byte&0x07       =0x06           128 colors
#>10    byte&0x07       =0x07           256 colorsand #------------------------------------------------------------------------------
# JPEG images
# SunOS 5.5.1 had
#       0       string          \377\330\377\340        JPEG file
#       0       string          \377\330\377\356        JPG file
# both of which turn into "JPEG image data" here.
0       beshort         0xffd8          JPEG image data
6 string JFIF \b, JFIF standard
6 string Exif \b, EXIF standard# The following added by Erik Rossen <[email protected]> 1999-09-06
# in a vain attempt to add image size reporting for JFIF. Note that these
# tests are not fool-proof since some perfectly valid JPEGs are currently
# impossible to specify in magic(4) format.
# First, a little JFIF version info:
11 byte x \b %d.
12 byte x \b%02d# Next, the resolution or aspect ratio of the image:
13 byte 0 \b, aspect ratio
13 byte 1 \b, resolution (DPI)
13 byte 2 \b, resolution (DPCM)#>4     beshort         x               \b, segment length %d
# Next, show thumbnail info, if it exists:
18 byte !0 \b, thumbnail %dx
19 byte x \b%d
# Here things get sticky. We can do ONE MORE marker segment with
# indirect addressing, and that's all. It would be great if we could
# do pointer arithemetic like in an assembler language. Christos?
# And if there was some sort of looping construct to do searches, plus a few
# named accumulators, it would be even more effective...
# At least we can show a comment if no other segments got inserted before:
(4.S+5) byte 0xFE
(4.S+8) string >\0 \b, "%s"
#>(4.S+5)       byte            0xFE            \b, comment
#>>(4.S+6)      beshort         x               \b length=%d
#>>(4.S+8)      string          >\0             \b, "%s"
# Or, we can show the encoding type (I've included only the three most common)
# and image dimensions if we are lucky and the SOFn (image segment) is here:
(4.S+5) byte 0xC0 \b, baseline
(4.S+6) byte x \b, precision %d
(4.S+7) beshort x \b, %dx
(4.S+9) beshort x \b%d(4.S+5) byte 0xC1 \b, extended sequential
(4.S+6) byte x \b, precision %d
(4.S+7) beshort x \b, %dx
(4.S+9) beshort x \b%d(4.S+5) byte 0xC2 \b, progressive
(4.S+6) byte x \b, precision %d
(4.S+7) beshort x \b, %dx
(4.S+9) beshort x \b%d
# I've commented-out quantisation table reporting. I doubt anyone cares yet.
#>(4.S+5)       byte            0xDB            \b, quantisation table
#>>(4.S+6)      beshort         x               \b length=%d
14 beshort x \b, %d x
16 beshort x \b %d

How do I find out who my iPhone 4S is locked to? I can't get passed the activation screen.

How do I find out who my iPhone 4S is locked to? I can't get passed the activation screen.

How can you not know this? Where did you get the phone?
Ask whoever you bought it from or call AppleCare and give them the serial number.

For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. Nothing there about sizing.

For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. I don't see anything about re-sizing when I click the adjust tab: only saturation and tint levels. Thank you.

With respect to digital images, there really is no size in inches. The size is given as number of pixels horizontally and vertically. In iPhoto '09 you click the little "i" inthe lower right side of the window and it will display information related to the selected photo, including the pixel dimensions. I do not have iPhoto '11 installed so I don't know if it is the same there.
In some applications, such as preview, it has something additional called Dots per Inch (DPI) which you would think would allow you to convert the pixel dimensions to inches. It is not a real thing, though. The DPI is determined by how large or small you have chosen to print your photo and the capabilities of your printer.
There is also something called Aspect Ratio, which is usually expressed in inches x inches such as 6x9 but that doesn't mean the size on the screen or when printed is 6x9. It is the ratio of the pixel dimensions. When cropping your photos, you will have several standard aspect ratios to choose from plus any custom ones you create.
In iPhoto '09, after you choose Print, in the Print Setting window are the settings for the size you want the photo printed. You want to shoose a setting with the same aspect ratio of your photo. Otherwise, iPhoto will resize and/or crop your photo to fit the size you have chosen.

Find out if a certain Stored Procedure runs

Hi all,
i have to state that i dont have much oracle specific database knowledge but i've spend half a day now gathering information about a certain problem and didnt find any really working solution.
What i want is to be able to find out if a certain stored procedure is currently running (executing) in the database. I need that to be able to prevent a user of my client application from executing a certain procedure more than once in the same time.
I have found some interesting information about the oracle Call Stack (dbms_utility.format_call_stack) but its not as helpfull as i orginaly thought because as far as i can see it only shows which procedures where executed (and are still executing) while the procedure with the dbms_output.put_line(dbms_utility.format_call_stack) command is executing.
But it doesnt show anything about procedures which are running in another instance of SQL*Plus, for example.
I have no other idea at the moment ...
So i hoped anybody in here maybe has an idea or maybe allready a solution.
But ... thanx in anyway =).
With greetings from germany,
Oliver Bankel

I'm sure there are several solutions.
This is how we solve this problem, not elegant but it works.
We have a table of procs that are running.
Active_Jobs
JOBNAME    VARCHAR2(35)
USERNAME   VARCHAR2(30)
STATUS     VARCHAR2(20)
Then within the proc
job_conflict               EXCEPTION;
BEGIN
select count(1) into v_status from ACTIVE_JOBS
where username = USER and status = 1 ;
if v_status > 1 then
   RAISE JOB_CONFLICT ;
end if;
INSERT INTO ACTIVE_JOBS (JOBNAME, USERNAME, STATUS)
   VALUES ('PROC NAME', USER, 1) ;
COMMIT;
DELETE FROM ACTIVE JOBS WHERE JOBNAME = 'PROC NAME' AND USERNAME = USER ;
COMMIT;
exception
   WHEN job_conflict THEN
     raise_application_error( -20010,'YOUR MESSAGE HERE');
END;

Finding out where a certain colour is used

Hi everyone,
is there a way to find out where a certain colour (swatch) is used inside a document, like on what page or something?
Inside a single-page document is not a big deal, in a 200+ paged document it is hell to find out…
I can search for "character colour" and search again for object fill and again for stroke and again and again.
I'm looking for an "easy" way to use.
or maybe there is a script for that?
thanks for helping me out!

jocstone_me wrote:
Hi everyone,
is there a way to find out where a certain colour (swatch) is used inside a document, like on what page or something?
Inside a single-page document is not a big deal, in a 200+ paged document it is hell to find out…
I can search for "character colour" and search again for object fill and again for stroke and again and again.
I'm looking for an "easy" way to use.
or maybe there is a script for that?
thanks for helping me out!
The commercial Blatner Tools plug-in for InDesign from dtptools.com can find colors and can create a report of all colors or only those used in the current document. There's a 14-day free trial.
I have no connection to the company other than being a satisfied user.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

When I attempt to drag doc to trash "Finder wants to make changes" "Type your password to allow this" When I do this the doc is immediately deleted. How do I turn this off?

When I attempt to drag doc to trash "Finder wants to make changes" "Type your password to allow this" When I do this the doc is immediately deleted. How do I turn this off?

Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
1. Triple-click anywhere in the line below on this page to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Is it possible to find out how much memory each App is taking up?

Hi,
About 2.5gb of my iPhone's memory is taken up by Apps, according to iTunes.
Is it possible to determine which Apps are using big chunks of memory? Is it possible at all to find out for each App how much memory it uses?

There's no tutorial from Apple to say. It's three things I've noticed. Applications not classified yet by the iTunes computer, Application's stored data and redundant memory.
One time I noticed a very high usage of "other" when I know I installed Applications. I unchecked the Applications and synced to remove it all down to redundant memory, resynced and it went to nearly all Application space with a lower "other" space.
If you plug in your iPhone and access the iTunes iPhone options, you can uncheck applications and resync to find out if that lowers the "other" memory of 1.5 Gigs.
Or you can try unchecking the music, videos, photos, etc and see if that is it too.
A clean restore may help too.
Message was edited by: JoeZinVA

Is it possible to find out if a certain type of document is available inside a document-set by the help of workflows?

Similar Messages

Maybe you are looking for