Is it possible to find out if the over print is applied for other than 100% black  object?

I need to find out the over print is applied for other than 100% black objects in "illustrator cs3" through programmatically. Kindly advice me.

Anyone please

Similar Messages

  • HT5594 I have lost my I phone5 amd I have enabled lost mode. But still I can't find out where it could be and I cloud search gives offline signal. If the thief turns on my phone is it possible to find out my phone or given any signal for me?

    I have lost my I phone5 amd I have enabled lost mode. But still I can't find out where it could be and I cloud search gives offline signal. If the thief turns on my phone is it possible to find out my phone or given any signal for me? is it possible for the thief to use or sell my I phone even it is on the locked mode by ICloud?

    If it is turned on and your lock request is able to be fulfilled, a confirmation email will be sent to your Apple ID email address. There isn't any known way to bypass Activation Lock on your phone so no one will be able to use it. More information on Lost Mode: http://support.apple.com/kb/PH2700

  • Is it somehow possible to find out how the device clock works? DDS or ...?

    I would like to find out (programmatically) if the clock from my device works with DDS or like the "normal" multifunctional DAQ Devices. I need to know because if I use a sensor which is connected to such a "special" device, it is not possible any more to use a quadrature encoder as external clock signal.
    Thank you for your time ...

    Hello Jared
    My devices are:
    NI 4472
    NI 6024E
    NI 6601
    They are all conneted via a RTSI cable.
    I know that the "NI 4472" device works with DDS, that's not the problem.
    What I want to know is if it's somehow possible to get the information that NI 4472 works with DDS programmatically. Is it somehow possible to get information about the device you are using programmatically?
    I want to use the DAQmx driver - in that case, all information I am able to get about the device is:
    - serial number
    - device name
    Is that more or less all I can find out about the device programmatically?
    I really would like to get more information about the devices I am using - in that case the programm I am writing would work for different combinations of devices b
    ecause I could make some different cases (with DDS, without DDS, ...)
    I hope I don't confuse you with this explanation even more.
    Thank you for the help
    Andy

  • How to find out what the geniric short forms stand for?

    Hi if you see the ThreadLocal class in jdk1.6 it is written like this in doc. ThreadLocal<T> and if you see the method Class.forName() the return type is Class<?> i am just confused a littele bit. how to find out what this <T> and <?> stands for? I mean how do i know that what to pass in their place?

    [Start from Here|http://java.sun.com/docs/books/tutorial/extra/generics/index.html]

  • How do i find out what the inforamtion that is stored under "other" in my ipad2 is?

    I have just backed up my ipad and i noticed that there was an massavie amount of storage used by the "other" in storage.  I was wondering if there is anyway that i can find out what it is and how can i delete some of the information to free up space on my ipad?

    What is "Other"
    It’s generally a combination of local caches from apps, browsers, mail, Messages, Reading List, saved games, app-specific documents and data, notes, and voice memos.
    You can backup and restore to reduce "other" but they will start building up over time.

  • How do I find out what the correct tag information is for a TV series I purchased through the iTunes store?

    Right now I have episodes that should be in their own grouping mixed up with others and I would like to get them seperated.  It's the Doctor Who series if that makes a difference.  Specifically the specials which don't quite fit into a season and were a seperate purchase from the series themselves.

    I'm confused. Who told you that you need to deauthorize an Audible account to be able to play your music? Did you ever set up an account with Audible.com? What is happening when you try to play your music?  And what exactly do you mean by "sync your iTunes account with your laptop"?
    Please provide more details as to your situation and what it is you're trying to accomplish. I'm sure once we understand what it going on, someone can provide suggestions.
    Regards.

  • How to to find out if the objects used "Registration" color or not?

    Is it possible to find out if the objects used "Registration" color or not via scripting? Kindly advise me.
    Thanks for looking into this.

    Hi,
    May be you might read this post
    http://forums.adobe.com/thread/623432?tstart=0
    ciao , art.chrome

  • I've lost my Ipod. Is it possible to find it with the serial number.

    Hi,
    I've lost my Ipod Touch and I'd like to know if it's possible to find it with the serial number.
    Thanks for answer.
    D

    No. The SN will only help identify the iPod as yours if it is recovered.
    - If you previously turned on the FIndMyiPod feature and location service is on, and wifi is on and connected go to iCloud, sign in, and go to FindMyiPhone. It the iPod has been restored it will never show up.
    - Report to police and change the passwords fro all accounts used on the iPod.
    - Apple will not help
    Reporting a lost or stolen Apple product

  • Is it possible to find out the names of the various objects (jpegs, pdf's, etc) in a keynote presentation?

    I have to re do a keynote presentation for powerpoint -- the export feature won't work on the pc -- it simply says that it wasn't possible to display some of the text and objects because they had become corrupted, and were replaced with blank slides.  I was wondering if it's possible to find out the names of the objects used in the presentation.  That way I could save them to a folder and just paste them in to the PPT version on the PC.  I know they have to be somewhere on the Mac that the presentation was made on, so is it also possible to find out where they would be?
    I tried right clicking on the objects in the slide, but there was no 'get info' option, like there is in a finder window.  Please help if you can.
    Chris

    There are a few options for you here. In the Inspector>Metrics Tab, when you click on the picture, it will display the name. Then you can use the find feature of the Finder to locate the picture. If you have Keynote set to save files as Packages, you can right click the file in the Finder (or control click) and then select Show Package Content. This will show you all the files that make up your Keynote and you can copy the pictures out of there into a new folder. Finally, if you can't find them any other way, you can select and copy the picture in Keynote, then open Preview and command-n (or File Menu>New from Clipboard) and then save the file to where ever you want so you can find it.

  • Someone puts iTunes Store purchases on my credit card !!! I took the last purchase from my account in 2009, is it possible to find out which account abuses my credit card?

    Someone puts iTunes Store purchases on my credit card !!! I took the last purchase from my account in 2009, is it possible to find out which account abuses my credit card?

    Follow the instructions here > How to report an issue with Your iTunes Store purchase
    And if you have not already done so, change your Apple ID password ASAP >  Apple - Support - Apple ID

  • Is it possible to find out when was ipod nano 6th gen last time connected to the iTunes?

    Hi
    I would like to know is it possible to trace this information using serial number or is it possible to get this info from some authorized personal?
    Thanks in advance

    You may not be able to show "When" the iPod nano was plugged in, but you can find out when the last sync was.  Open the desktop iTunes app (you don't need to plug the nano in), choose the iTunes drop down menu, select "Preferences" {or after opening iTunes, use Command-Comma to show the Preferences, select the "Devices" icon.  It will show all devices which have been synced.  This may or may not show if logged in under another user.  This is only the easiest way.  Jim

  • Is it possible to find out if a certain type of document is available inside a document-set by the help of workflows?

    Is it possible to find out if a certain type of document is available inside a document-set by the help of workflows?

    Hi,
    According to your post, my understanding is that you wanted to find out if a certain type of document is available inside a document-set.
    Per my knowleadge, there is no out of the box way to accomplish this with SharePoint Designer Workflow.
    To find the content type inside a document-set, there are two methods:
    First, open a document set, click “New Document” option, then you can find the available content type in the document set.
    Second, open the document set content type, open Document Set Settings Page, then you can see the available content type.
    More information:
    What is Document Sets in SharePoint 2010?
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Is it possible to find out which user was used to delete the job?

    Is it possible to find out which user was used to delete the job?
    Any logs?

    Hi,
    You can find who are the users who executed sm37 in ST03N.
    This might also help you in analyizing.
    Regards,
    Vamshi.

  • Is it possible to find out the program having the paramters?

    Is it possible to find out the program having the paramters? if possible can you give the query

    Search the forum/Google and you should get many hits (like the ones below).
    Write a QUERY of Concurrent Program
    Write a QUERY of Concurrent Program
    Query to get Concurrent program name and its parameter
    http://sureshvaishya.blogspot.com/2008/07/query-to-get-concurrent-program-name.html
    Query to list concurrent program details with its parameter, values set and default value/type
    http://www.knoworacle.com/2010/12/query-to-list-concurrent-program.html
    Thanks,
    Hussein

  • How do I find out if the pressed key is printable?

    I have made a game and now I'm working on a hiscore table for it. But with my function the program doesn't know if the pressed key is printable or if it's shift, ctrl or something like that. And I made it possible to enter maximum 40 letters as name, so if the user holds the shift key for a while then the whole String is filled with shift characters and nothing shows on the screen and he/she isn't able to type in any more letters... So is there any way to find out if the pressed key contains a printable char?
    This is what my function looks like now. My program is quite big so I just post the function and try to explain what is happening
    /* high is an array of
    int score;
    String name;
    boolean WritingName;
    boolean GAMEOVER;
    boolean newgame;
    public void keyPressed(KeyEvent e) {
         if (GAMEOVER){  // checks if the game has ended
             char button = e.getKeyChar();
             int keyCode = e.getKeyCode();
             if (newgame){  // this is false if the hi-score list is showing otherwise its true. i.e. its true when typing name for hiscore list
                   if (keyCode == 10) {       // check if the pressed key is enter
                        WritingName = false;  // Tells an other function that the user has finished typing his/her name so it can save it and start showing the hiscore-list on the screen
                   } else {
                        if (keyCode == 8){    // check if the pressed key is backspace and if so removes the last char from the string
                             if (high[99].name.length() > 0){
                                  high[99].name=high[99].name.substring(0,high[99].name.length()-1); 
                        } else {  // if any other key is pressed then add it to the end of the string
                             if (high[99].name.length() <= 40 ) high[99].name += button;
                   paint(getGraphics());
              } else {  // checks if space is pressed to stop showing the hiscore-list and start a new game
                   if (keyCode == 32) newgame = true;
    }

    But with my function the program doesn't know if the pressed key is printable or if it's shift, ctrl
    or something like thatProbably the easiest way is to check and see if e.getKeyChar() < a space character or if e.getKeyCode() >= 127. You can use e.getModifiers() to get the modifier, etc... -- take a look at the documentation for java.awt.event.KeyEvent class.
    V.V.

Maybe you are looking for

  • File-FTP command before message processing

    Hi experts, my requirement is as follow : i have 5 files on my FTP server. All are named FILE_hhssmm.xml In the configuration of my CC out, i have put as specific file name to get picked 1*.xml I need a command line in the 'run operating system comma

  • Why AS10g Forms Applet don´t start with IE7 and SUN Java???

    Hi @ all, since two days i am really confused about this strange behaviour of internet explorer 7 with the Sun JRE 1.5.0_15. Running our forms with Mozilla Firefox 3.x works fine with Sun JRE, but with IE7 the applet doesn´t start. I don´t get any er

  • Applet like input type=file ?

    I need to build an applet that will facilitate file uploads. It needs to be part of a form, and when files are dragged into it, it forces a form submission, uploading the contents of the form as well as the dragged files. Of course, we want all the b

  • Query on Purchasing Datasources

    Hi I am using 0PUR_C04,  which is fed by 2LIS_02_HDR,2LIS_02_ITM, 2LIS_02_SCL. However Scheduling agreements are maintained in here. Do I still need to use 2LIS_02_SCL? or Can I do away with this? Thanks PB

  • How can i send several emails at one time

    Im trying to send an email out to several addresses and im getting a mailer demon message. How can i send this one email to several addresses?