Is it possible to find out when was ipod nano 6th gen last time connected to the iTunes?

Hi
I would like to know is it possible to trace this information using serial number or is it possible to get this info from some authorized personal?
Thanks in advance

You may not be able to show "When" the iPod nano was plugged in, but you can find out when the last sync was.  Open the desktop iTunes app (you don't need to plug the nano in), choose the iTunes drop down menu, select "Preferences" {or after opening iTunes, use Command-Comma to show the Preferences, select the "Devices" icon.  It will show all devices which have been synced.  This may or may not show if logged in under another user.  This is only the easiest way.  Jim

Similar Messages

  • When my ipod nano 6th generation falls asleep or if the light dims the music will stop how can i fix this

    i cant get this to stop i have reseted it and everything. i have the 6th generation ipod nano and when i press the little sleep button so i wont press any buttons it turns off or when it dims the light the music will stop i dont know why please help

    Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power. Here are the solutions:
    Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
    Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
    Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
    If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
    i

  • Trying to find out when was the object last referenced?

    Hi All,
    Is there a way I can find out when was an object or all the objects in a schema were last referenced along with the time it was referenced (May be a standard code all_references as such)? Just want to find out if there are any dormant objects. Thanks for the help,
    Reddy

    Hello,
    No.
    You can query user_dependencies and compare to all_objects, but this will only show you objects that have no direct dependencies. You will not be able to identify objects used only by e.g. shell scripts or a JAVA application.
    Regards
    Marcus

  • Is there any to find out when was the essbase application created ?

    Hi Gurus,
    Is there any to find out when was the essbase application created ?

    Unix record the last modified date for the file/directory , but noe the date created for the files.
    Is there anywhere this information is recorded in the Hyperion system ,,,like say Shared services tables...
    I was just guessing that if i could find out the date when the Applicaiton was registered to the shared services, how can we check that ?

  • How to find out when was my iphone 5 manufactured

    i want to find out when was my iphone 5 manufactured.

    Enter its serial number here: Decode Mac Serial Number.

  • How to find out when was local administrators group changed

    Hi
    Is there any way how to find out when was user added to local administrators group on server(2003 to 2012) ?

    Hi,
    If you have auditing enabled for "Audit account management" and your security logs are not overwritten then you can look for a 4732 or 636 (Windows 2003) event ids.
    https://technet.microsoft.com/en-us/library/cc737542(v=ws.10).aspx
    https://technet.microsoft.com/en-us/library/dd772663(v=ws.10).aspx
    Hope it helps.
    Regards,
    Calin

  • How can I find out when was a particular table last updated?

    How can I find out when was a particular table last updated? I need to find out the usage of this table - when was it last updated, etc. Thanks in advance. The version I am using is Oracle 9i.

    If you don't have any application level logging, and auditing is not enabled, there's not much hope.
    You could, if you have archive logs available, go trawling through archive logs via logminer, but that's likely to prove painful and not very fruitful, unless you're very meticulous and patient...
    -Mark

  • HOW TO FIND OUT MY LOST IPOD NANO?

    HOW TO FIND OUT MY LOST IPOD NANO?

    There are no ways to remotely track/locate an iPod nano.  Sorry.

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • I plugged my ipod nano 6th gen in to the latest version of itunes today and as soon as i plugged it it it turned on automatically as it should when i came back to it 5 mins later, picked it up and it felt warm and it wouldnt turn on. what should i do?

    I plugged my ipod nano 6th gen in to the latest version of itunes today and as soon as i plugged it it it turned on automatically as it should when i came back to it 5 mins later, picked it up and it felt warm and it wouldnt turn on. what should i do?

    I have the same problem and can't seem to figure out what the problem is. I rebuilt my iTunes library and still my 6G nano crahes whenever I load an AAC tune onto it.  MP3s and podcasts all work fine, it's just the AACs... 
    Just *loading* an AAC song will cause the Nano 6G to reboot as soon as it disconnects from Itunes. It will then reboot a few times and then go into recovery mode. :-(
    Karen

  • My ipod nano 6th gen just flashes the apple logo when plugged in but goes blank when not plugged in. i have tried changing format to fat32 but i can't on windows 7

    i have recently recieved an ipod nano 6th gen after the 1st gen recall, and out of nowhere it just started flashing the apple logo when connected to computer. Help please!

    Universal Serial Bus controllers
         Intel(R) ICH9 Family USB Universal Host Controller - 2934
         Intel(R) ICH9 Family USB Universal Host Controller - 2935
         Intel(R) ICH9 Family USB Universal Host Controller - 2936
         Intel(R) ICH9 Family USB Universal Host Controller - 2937
         Intel(R) ICH9 Family USB Universal Host Controller - 2938
         Intel(R) ICH9 Family USB Universal Host Controller - 2939
         Intel(R) ICH9 Family USB Universal Host Controller - 293A
         Intel(R) ICH9 Family USB Universal Host Controller - 293C
         USB Composite Device
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
    I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

  • When connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?"

    when connect ipod nano 6th gen i get error message "you need to format the disk in drive G: before you can use it Do you want to format it?" Any suggestions please

    Hi Michael
    These are the answers
     to your questions
    What is the OS version, Windows Server 2008?   
    Microsoft Windows [Version 6.0.6001]  
    SP1
     On which disk you choose to install it, the C: drive? 
    I have Raid 5
    What
    is the output of the Checkdsk?   It find Nothing
    Could
    you please upload us a screen shot?  I have no 
    Screen shot
    Is
    the C: drive is a external drive?  NO
    Besides,
    have you manually assigned the drive letter? 
    NO
    Thanks

  • IPod nano 6th gen (brand new) doesn't recognize when headphones are plugged in

    I have a brand new iPod nano (6th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted (which is not the case.. i'm absolutely sure about this) or that the headphone jack has dust inside (which is also not the case, since it is brand new).
    This is what happens:
    When i play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if i let the music play, it stops when the screen times out and turns off. These two things occur because the ipod "thinks" that there are no headphones inserted.
    When i try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
    Needless to say, the microphone and volume controls of the iphone headset, don´t work at all (they even work on the ipod shuffle!).. and because of this, no voice recording for me!
    It's a shame, because the FM radio is completely useless, and music playing only works by activating the "double click to play" option in the settings menu.. but it is somewhat cumbersome the process of "play music - turn off the screen - double click to resume playing" every time I select a song.
    The headphone detection has only worked randomly when the ipod is connected to the computer, but i haven't been able to figure out under what conditions this occurs. I have read about this issue, and I only would like to know if this is a firmware bug of the 1.2 version. I tried unsuccesfully to downgrade the firmware to the 1.1 version (maybe because the ipod shipped with the 1.2 version).
    I have also restored the device in itunes, with no luck.....
    Thanks in advance for any useful answer!

    Thanks for your answer...
    The headphones that i'm using, are the ones that were included with the iphone 4 (so, they are original).. however this shouldn't be a problem, as the ipod should work fine with whatever headphones i choose to use (sound quality will vary, of course).
    The ipod does the same with the headphones that were included in the box, and with every pair of headphones i have used to test, so i'm certain that the ipod has an issue.
    I hope that the picture is clear enough.. here you can see that the headphones are fully inserted, and the ipod is not recognizing them.

  • Using windows 8 - receive message "ipod detected but cannot be identified" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?

    Using windows 8 - receive message "ipod detected but cannot be identified properly" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?

    This is how it's displayed: http://i50.tinypic.com/nd7vk7.jpg
    And this is what happens when I click properties and 'search for solutions': http://i47.tinypic.com/2iu3vrc.jpg (the box disappears after that, apparently having done nothing, when I search online for software it informs me my computer already has the best/latest installed)
    I use a Toshiba Satelite L350-170, my Vista is a 32-bit Thankyou!
    Message was edited by: Martha11

  • HT2905 How do I delete playlists from my ipod nano (6th gen.) when I am in itunes? I right-click it but it does not give me an option to delete.

    How do I delete playlists on my ipod nano (6th gen.) when I am in itunes???  I right-click and it won't give me an option to delete.

    Hello there, 209girl.
    The following Knowledge Base article provides the steps for how to delete your playlist:
    iTunes 11 for Mac: Delete songs, playlists, or other items
    http://support.apple.com/kb/PH12159
    Additionally, the iPod User's manual shows how to delete it from the iPod itself (on page 26):
    iPod (6th Generation) User's Guide
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for