Is it possible to fry a peripheral by attaching it to the firewire port?

I attached a secondary non apple piece of electronic equipment three separate times with 3 separate pieces of equipment. Each was rendered inoperable, dead.
Has that happened to anyone before?

With a bit of force, it is possible to plug a FireWire 400 plug in backwards, and cause damage.
Also, it is possible that your FireWire devices were not designed to handle the full range of allowed FireWire power. Laptops normally provide 12 V over FireWire, but desktop computers may supply 30 V. The original FireWire specs allowed up to 40 volts.

Similar Messages

Is it possible to connect MBPR with Cinema HD Display 30" 's Firewire Port for iSight

I want to buy a external iSight for my old Cinema HD Display 30" ,as i don't have enough space to open my notebook to use the built-in iSight camera.
I know they are very old item, but i think they have very beautiful design and great quality, i want to use them
I have already using the 30" Display by Dual Link-DVI converter, i don't have any firewire device, i don't know is it still work for using Thunderbolt (MacBook) -> Firewire800 (Adapter)-> Firewire400(converter) -> Cinema HD Display FW port -> external iSight
or is there any other solution for me?
or should i give up this setting
As i don't want to use other brand USB camera, other brand no need to consider.
Thanks for attention

mluk6328 wrote: I want to buy a external iSight ... I know they are very old item, but ...
Test BEFORE you buy. More discussion in this old thread: http://discussions.apple.com/thread/2450744 .

HT1399 Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming. So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on. But the ipad is a different story. I have the music and artist but not one playlist I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this.
Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z. Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac. Which I do talk highly of all the time. But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
I have managed to get the Imac to fix this but for some reason the IOS devices do not. Any ideas?
Thanks Al

Is it possible to use both an ILB and an ELB (listening on the same port) in the same Azure cloud service?

I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
So, a typical Lync deployment looks like this:
       Internal users
               |
               443
                  |
          Internal LB
        192.168.0.20
        443         443
          |               |
   Lync FE 1     Lync FE 2
192.168.0.21 192.168.0.22
          |               |
      4443        4443
          External LB
       Public IP Address
                 |
              443
                 |
       External Users
This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
is the keyword here.
After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
For reference, my commands are:
Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
(This completes successfully)
Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
(This fails)
The existing external endpoint is configured as such:
Get-AzureVM LYNCFE1 | get-azureendpoint
LBSetName : HttpsExtLB
LocalPort : 4443
Name : HTTPS-Ext
Port : 443
Protocol : tcp
Vip :
ProbePath :
ProbePort : 4443
ProbeProtocol : tcp
ProbeIntervalInSeconds : 15
ProbeTimeoutInSeconds : 31
EnableDirectServerReturn : False
Acl : {}
InternalLoadBalancerName :
IdleTimeoutInMinutes :
LoadBalancerDistribution :
The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
shouldn't be any conflict here... however it looks like there is one instead.
Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?

Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?
a) HP printer with USB port only (no ethernet port) connected to Airport Express
b) No issue printing from Macs
Tests
1) Installed Bonjour 2 - does not find printer (now uninstalled)
2) Bonjour 3 is listed in programs but no way to access
3) Using TCPIP address (and no Bonjour) gives 'Unsupported Personality' error when printing test page
Regards
Richard
p.s. why are all Windows 8.1 questios n the forum 'Locked' with no reply?

This is possible, but not with Bonjour or any other fixes. It is just a printer set up based on the Port name of the Airport, 10.0.1.1.
I found the answer on YouTube, Title: Windows Printing For Apple AirPort Extreme without Bonjour Wireless wifi.

TS2972 is it possible to use home sharing between two users on the same computer?

My wife and I have itunes accounts and want to be able to share music we have each bought on our accounts. We have tried setting up the home sharing on our PC but it doesn't show up on the screen. Can anyone please help?

"Is it possible to use home sharing between two users on the same computer?"
No. Home sharing is used to connect two running instances of iTunes across a network. When you switch users on the computer all applications running on the other profile are suspended.
You can however share your respective media folders so that they are visible in either profile and then copy over any content that you want, or you could create a single joint library which you use when either user is logged in.
tt2

Is it possible to control itunes dj from other computers on the same network?

is it possible to control itunes dj from other computers on the same network? we have a computer running itunes connected to our speakers here at work, and we'd like to be able to control it through the other comptuers on the network. is this possible, or do you have to use iphones/ipads/etc?

AC is corret you can do that. It might work a bit better for you if you use a wired connection vs a wireless one for the ATV's.

How far is it possible to upgrade a Mac Pro mid-2010 to the maximum extract.

Hello
How far is it possible to upgrade a Mac Pro mid-2010 to the maximum performance. I would be interested how far one could come close to the performance of the new Mac Pro 2013, or is it hopeless.
My computer
Mac Pro
mid-2010
Processor 2 x 2.4 GHz Quad-Core Intel Xeon
Memory 14 GB 1066 MHz DDR3 ECC
Graphics Card ATI Radeon HD 5770 1024 MB
Software OS X 10.9.1 (13B42)
Please excuse my english is not the best because.

For what apps?
Okay, you have the slower 2.4GHz processors, most have found that MHz still rule and matter, meaning a 6-core 3.4GHz for some applications (most) was the best and the sweet spot.
So you could upgrade to a pair of 3.2GHz 4-core (cheapest) rather than splurge on two 6-core 3.34GHz (more expensive and more cores).
First thing to do, put the system on a 256GB Samsung 840 SSD.
For photoshop and graphics, invest in some more SSD ($US300 for 500GB) and put those on a PCIe SSD controller ($300 Sonnet Tempo Pro) and put Aperture/Lightroom on one, and use the 2nd SSD for scratch.
RAM: 24-32GB would probably help all but the more casusalist of user.
Tips and articles:
http://www.macperformanceguide.com head to the TOPICS main page and there are dozens of sections each a different area of upgrade and optimization for applications. Storage, memory, how to, use arrays, backup strategy.

Is it possible to create a DVD in iDVD without using the themes they provide?

Is it possible to create a DVD in iDVD without using the themes they provide?

Hi
No Menu DVD
from. Mishmunken
How to create a DVD in iDVD6 without menu (there are several options)
1. Easy. Drop your iMovie in the auto-play box in iDVD's Map View, then set your auto-play item (your movie) to loop continuously.
Disadvantage. The DVD plays until you hit stop on the remote
2. Still easy. If you don't want your (auto-play) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the drop-zone (text needs to be black as well).
Disadvantage. The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time. Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage. One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software. Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn.
Disadvantage. you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way". Post-production with myDVDedit (free-ware)
Tools necessary. myDVDedit ( www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned. If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager.
//lonestar.utsa.edu/llee/applescript/dvdimager.html
hope this helps!
From LynnLU USA
www.mediasoftmac.com/dvd-creator-articles/convert-mov-video-to-dvd-on-mac.html#1 29
Yours Bengt W

Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

Hi...
The issue is that your credit or debit card credentials must be associated with the same country where you reside to make purchases.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article
Billing policy is the same for both the iTunes as well as Mac App Stores.

Is it possible to choose the serial port if only the run time engine is installed

I have an application, which communicates over the serial port. When I use the full version of Labview I can change the serial port without any problem from Com1 to Com2 (similar to the example “Hardeware input output -> serial -> Labview serial vi"). When I build an application and try to run this program on a computer where only the run time engine 6.1 is installed, it is not possible to choose the serial port. Since there is no “Measurement and Automation Explorer” available on the run time engine and no directory C:\VXIpnp is created, when the run time engine is installed, I do not see a way, how I can satisfy the computer with the information it needs for configuring
the different ports. Any suggestions?

Hi Daniel,
Before LV6.1 there was LV5.1 In LV5.1 the way to Spedify a resource was to use a string control with correct VIsa Resource Class identifier. For eg. "GPIB0::11" or "ASRL1::INSTR". With Introduction of VISA Resource Name Control and linking with MAX, These names are Available from Pull Down List and Can be Aliased, meaning ASRL1 which is Serial Port 1 can be called COM1 and so on. However the old method still works with all 6.1 Controls. Only thing is you have to make sure you Dont Conflict the Class Names ie Use "GPIB::.." instead of "ASRL..." when addressing Serial Port VI's.
To solve your Problem I would Build a Menu ring with COM1 to COM4 in the Pull Down List.
Next, If I use the Traditonal Serial Port VI wich accepts the Integer as Seria
l Port #. I just Wire the Menu Ring to this VI.(Remember COM1 is 0, COM2 is 1 for this VI)
If I use VISA Config Serial Post. I build an Array Constant with Corresponding VISA Class Names So in our case a String Array Constant of 4 elements "ASRL1::INST" to "ASRL4::INST". I Use Index Array Function With the Index Wired to my Menu Ring. The Array Input Terminal Wired to the Array Constant. The Output of this Array will be correct Visa Class Name Based on slection of my Menu Ring. I can Wire this as Input to my VISA Config Serial Port Vi.
I have attached a Small VI to Illustrate this.
Drawback: You must Predefine what Ports you will Want to Use. Basically you define all the cases.
I hope this Answers your Q!
Good Luck
Mache
Good Luck!
Mache
Attachments:
Serial_Port_Select.vi ‏36 KB

I want to view the screen of my dslr camera in live view on my macbook pro via the hdmi port, is this possible?

I would like to view the output from my DSLR on the screen of my macbook using the hdmi port. I know I can connect to a tv to send images "out" from my macbook, but is it possible ti send images in?? I operate my camera by remote control, and would really live a live view if possible.
Thank

Nope - you can only output video from your MBP - there's not a port for input.
Clinton

The USB port on my 4th generation Airport Extreme does not recognize any peripheral devices whatsoever. In other words, it does not function at all. What can I do?

I have had my Airport Extreme for almost a year now. I have not been able to get it to work. It has never worked. I have tried everything in the apple manuals, my peripheral device manuals, and online help. My Airport Extreme Base Station has a completely dead USB port. The USB connector does have voltage and ground. Apparently there is no data transfer. I do not know how to test the data pinouts. I don't know if it is a software or driver problem, or if it is a hardware or wiring problem. My computer is a mid-2009 13" MacBook Pro. All of my external devices work well with the MacBook Pro. The USB functionality on the MacBook Pro has always performed without a glitch. It seems the problem with the Airport Extreme must either be a network communication problem or a hardware/hardwire problem. I bought the Airport Extreme to build a home inTRAnet network. I have a seperate 3rd party router for inTERnet. Contrary to what the manuals declare, the initial setup of my Airport Extreme requires inTERnet setup during the process. Even when the choice is made to limit the network access to LAN only, when I reach the end of the setup process, a prompts reads that the Airport Extreme may not function because I have not set it up for inTERnet with the WAN. Well, Dah... during the intial stages of the setup I told the machine to configure an inTRAnet only LAN setup. So... I went ahead and set it up for inTERnet and WAN. Either way, the USB port is not working. Then I set it up for the whole package, WAN, LAN, and everything. Still... no function out of the USB port. Any ideas?
P.S. The Ethernet works and so does the 802.11 tranceiver. The USB port is the only problem, but a major, major one for my needs. There is no peripheral functionality.

Okay so I figured it out. I inherited the Configurator already set up so I didn't realize that our former administrator was brilliant and set things up a little differently. To anyone else who finds themselves in this spot try this:
After you plug the iPad in and open Configurator instead of trying to 'Prepare' the device click 'Assign'
There should be groups of Users listed on the left hand side of the screen.
Select the group you want the ipad to be a part of, or make a new group. ***Note a group can be one person so this is a good feature for teachers to have individual app assignements for students.
After you select the user group click the little plus ( + ) button on the bottom of the screen under the second column of info where names and device serial numbers should appear.
Type the name of the person, group, whatever you want to identify that assignment by into the blank that pops up after you hit the plus ( + )
Then select the assignment you just made and tohe 'Check Our' button at the bottom. At this point a box will pop up with a window at the top listing all devices supervised by Configurator. There is a tiny down arrow button that opens a scroll down menu to the right of this box. Click that, then select the device connected by USB as the one to assign.
The name of the assignment you gave it will show on the lock screen now and you can assign apps and profiles to the device like you would any other device in your Configurator inventory.
Good Luck.

Is it possible to connect an HP LaserJet P4015n printer to a computer via the ethernet ports?

My usb port on my Laserjet P4015n no longer works and I am unable to connect this printer to my network router because it's in a different room. Is it possible to connect an HP LaserJet P4015n printer to a computer via the ethernet ports? Of so, how would I go about making this connection? Will I need to install ethernet drivers for this to work?
Thanks,
Greg

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HT5628 Is it possible to install MS-Windows on MacBook Pro as the only OS

Is it possible to install MS-Windows on MacBook Pro as the only OS, using all the space of the SSD, by de-isntalling thus completely the Mac OS?

Yes.
but
You will have to erase the drive completely and install Windows, you can't achieve it just by deleting OSX
I do not recommend that you do it.

Is it possible to fry a peripheral by attaching it to the firewire port?

Similar Messages

Maybe you are looking for