Is it possible to get a camera added to the back of my ipod 5 16gb?
Is it possible to get a camera installed on the back of my sons ipod touch 5th generation 16gb? I bought the wrong one on accident.
No. If you purchased it from Apple within the last 14 days you can returnit for a full refund and purchase a 32 or 64 GB 5G since those have the back camera.
Returns & Refunds - Apple Store (U.S.)
Similar Messages
-
Is it possible to get a camera memory card out of the cd drive
http://www.youtube.com/watch?v=hpwDfpH4hR0
-
Is it possible to get a count of all the class files in a Flash Builder project?
Is it possible to get a count of all the class files in a Flash Builder project?
Thanks!Resultsets are one per connection unless you have copied them. Do you have lots of connections are you properly reusing them or at least closing and discarding all references?
See tutorial and Javadoc of API too -
I plan to buy an iphone 6 from New York. I am from India and shall be using the phone in India. Is it possible to get an unlocked iphone from the store? If yes, how much would it cost?
It is going to be months before any unlocked iPhone 6s will be available.
Also be aware that the iPhone purchased in the USA will only have warranty service in the USA. Any warranty service will require you to bring it back to USA. -
I upgraded my iTouch and my iPad2. If i doubletap the home button on iTouch, I get a camera icon on the home screen. However, if I doubletape the home button on iPad2, i have a little flower icon which gives me a photo slideshow. All Apple videos only seem to show the new camera-from-home-screen on an iPhone. Does anyone know?
Ok, that's what I thought. Just wanted to make sure i didn't miss something in the iOS5 upgrade. I guess instant access camera button is for iPods, iPhones and iPod Touches.......because I DO have it on my iPod Touch and my sister has on her iPhone. Guess it's just not an iPad thing!! Thanks!
-
The screen on my Ipod touch came away from the back.
The screen on my ipod touch came away from the back and then stuck back down a couple of days later. The battery seems to be weak now but everything else is OK. What could have caused this? Over chargibg in the car cradle?, Heat? Being held too tightly in the cradle?, Getting water inside?
Has this happend to any of you.
DanIf you have successfully restored the iPod to factory defaults/new iPod you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
-
i have updated my ipod 4g to ios 5.0. everything went great, but something is not right cause sometimes in the midle of a song the screen gets dark, then suddenly appear the home screen of ipod and the song stops. help-me, what should i do?
It occurs with both ripped songs and ITMS songs, but not always the same songs. Just this morning, I had a song skip ahead, then put down the ipod for a few mintues, came back and that same song did not skip ahead at all. I've been on a stretch now of about 20 songs with no skipping whatsoever. Hmmmmmm....
I've used all the five "R"'s multiple times to no avail. It just seems so random, it frustrates me.
Thanks for the help, King -
When trying to back up to a WD My Passport I get a message that says the back up disk is not available. Any ideas?
Find and run the Disk Utility program. In the list on the left side of the program window you should see two hard drives - the internal Mac drive and one labeled with Western Digital's name. (Not exactly sure how the WD drives appear.) Under each of those drives there will be another indented drive name. See picture below.
If you don't see two drives there's your problem - for some reason the Mac doesn't recognize that there's an external drive plugged in. Check cables, etc.
More than likely though you will see the two drives. See how in the picture I've selected the indented drive icon? Do the same for your WD drive. Now look at the bottom where it says Format. To use TimeMachine your format needs to be Mac OS Extended (journaled) and I'm betting it doesn't. After you've done that TM will be able to use the drive. -
i want to get old purchased songs and albums back onto my ipod. havent been connected in a couple years. old purchases have a cloud on them and wont let me access them. someone please help!
I have tried that as well. The purchased songs are not in my playlists and they are still there. I manually deleted them on the phone but the sync puts them right back on there.
I only sync playlists and they aren't on there. -
Can I walk into an apple store and get my name engraved on the back of my ipad?
II'm using my ipad for school and I don't want it stolen. Is there anyway I could go to an apple shop and get my name engraved on the back of my ipad for a decent sum of money? I live in Ireland and bought the ipad in PC world
Having it engraved wont' stop it from being stolen. All it might do is make it easier to identify if it is.
The best way to work towards preventing theft is to be smart with your device. Don't ever leave it laying anywhere unattended....you're in the library, need to take a bathroom break, don't leave it on the table, put it in it's case/bag and take it with you or leave it in the custody of a friend.
Be aware that it is a target for thieves and treat it accordingly. Treat it like you'd treat your purse or wallet. -
Is there any way i can get the back of my ipod touch 4th generation replaced by apple?
i really want to get the back of my ipod touch 4th generation replaced beecause there are a lot of scratches on the back of it and i am wanting to get the back replaced by apple is there any way i could do that?
See
http://www.apple.com/support/ipod/service/prices/ -
Can't find Genius in the store to turn it on (have searched on Google for help!) Can't get my recently added to synch either. Should I be cross with Windows 8 or iTunes???
Hi sandierocks!
You can find more information about the Genius features of iTunes here:
iTunes 11 for Windows: Use Genius Shuffle, Genius playlists, or Genius Mixes
http://support.apple.com/kb/PH12342
As far as the sync issue goes, would you mind providing more information about the nature of the issue please? Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
Is it possible to get planned orders by checking the capacities
Dear experts,
Can u please help on the following case!
when we do MRP run for any material, planned orders are getting generated on the particular date as per our PIR. once we got the planned order, we are converting to production orders to the defined date.
Is it possible to get the production order dates by checking work centre capacities?
even if capacity is full, production orders are getting generated on the particular day,we are not able to produce the item as defined on the day as capacity is full on the workcentre.ultimately customer is not happy as dispatch is not taking place in time.
how will we configure this case in the system to enable timely dispatches or timely intimation to the customers for delay in dispatch?
regards,
murthy.for any mxml tag with an id attribute: <mx:Button
id="foo">
the child is available simply as the variable "foo":
foo.label = "New Label"
Other children can be accessed by walking the tree using
getChildAt().
quote:
Originally posted by:
LaCampanella
If it is possible to get any child by the way like DOM's
document.getElementById, it will be very useful to us controling
child.
Thanks. -
Is it possible to add a graphics card to the back of my HP
Hello I want to know if it's possible to add a new graphics card to the back of a Laptop not inside of it but on the back of my laptop ??? my graphics Card is a Intel 4000 graphics card is a terrible for gaming TERRIBLE !!!
Not sure where it would go on the back, but no the system is closed. There is no place to insert a graphics card or attach it. You will find some hokey stuff on the internet where people say you can plug a video card in the wireless card slot but those are a hoax at worst and at best they do not tell you that such a thing would not even perform as well as what you have and is likely to damage the motherboard.
-
I updated to ios 7 now my wifi strength is low or gone I use to sit out on the back patio browsing the internet now I can't even get a signal in the next room in the house very disappointed
Hello, Olielettef.
Thank you for visiting Apple Support Communities.
Sometimes a simple power cycle of the router can correct the issue that you are experiencing. However, the issue could be a little more complex. Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology. Below, I have included two articles. The first article will cover basic Wi-Fi troubleshooting regarding iOS device connection. The second article cover the recommended settings for current Wi-Fi access points.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H.
Maybe you are looking for
-
Syntax error while creating Calculation view script based
Hi Folks, I'm creating Calc view based on script and drafted a simple code but I'm getting syntax error. Its just fetching few coloumns from two tables products and purchaseorderitem. /********* Begin Procedure Script ************/ BEGIN var_out =
-
How to import a richly formatted html text to textflow with importer?
hey all i am trying this: open google docs, new document, and type in: hello world (world bolded) then download it as html(zipped) i unzip the html file, and save it to the assets folder in src folder of my Flex app i have a Spark:TextArea instance a
-
Having problem with my audio only on a DVD it sounds bad. In FCPX the sound is great. I import the files from a samurai that is hooked up to a HD switcher. Can the sampling rate be off on the switcher. Found a solution but still want your advice.
-
MSS UCF_AcroForm error displayed when trying to display form in PCR
I receive a pop-up UCF_AcroForm error when trying to display a PCR form. I believe it is a configuration problem. I wonder if anyone has ever received this type of error before, and if yes, how was it solved. Thank you. Edited by: Emmanuel Filosi on
-
Hi Experts, In IR, I have created a Namespace to a SWCV and created all the Interface Objects and Mapping Objects. But i want to create the same Namespace to another SWCV. Now, my queries are 1) Am i allowed to create a Namespace (with s