Is it possible to get a camera memory card out of the cd drive, is it possible to get a camera memory card out of the cd drive
Is it possible to get a camera memory card out of the cd drive
http://www.youtube.com/watch?v=hpwDfpH4hR0
Similar Messages
-
I accidentally deleted GarageBand on my MacBook Pro, version 10.6.8. The new version of GarageBand is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?
The new version of GarageBand is only compatible with 10.9 and above.
If your Mac can run MacOS X 10.6.8, it probably can be upgraded to Yosemite, if you don't have to stick to Snowleopard for other reasons.
Is it possible to still get the older version?
Amazon or eBay are still selling iLife '11 installer disks, and you could reinstall GarageBand from these DVDs. But it will be expensive.
Have you checked your backups, if you can restore GarageBand from a backup?
OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?
Sometimes the AppleStore Support will replace missing installer CDs for a fee. -
I get kernel paic upon boot. I did that hard drive cleanup and reinstalled Lion. What about memory? Anyone think I need to upgrade my memory? I have 8 G of upgraded RAM. (20 inch iMac core 2 duo)
If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode. -
If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this. Thank you.
The DVD recorder I'm referring to is one I've use for years. It is not attached to my aging iMac in any way. I simply play the video from my camcorder (mini-dv tape based Canon HV20) into the DVD recorder and create a DVD that can be played in any DVD player. I can only do minimum editing so what goes in is what I get. This has been fine for creating dupes of the various things I shoot.
If I buy a new iMac (21 inch), I'd like to be able to download the video to the iMac through iMovie, work with it to whatever degree I wish, and burn it to a DVD that can also be played in any DVD player -- or to use as a master to dupe copies.
What I'm understanding from you and others is that this would be possible if Apple had included iDVD in the software that comes with the iMac, or if I purchase the iLife Family Pack, or buy the correct version of Toast. I'm hoping I can persuade Apple to sell me an iMac with iDVD installed.
Essentially I want to move from a basic process of creating DVD copies to the more sophisticated process of creating one from an iMac.
Thank you again for your help and wisdom. -
i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos
Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
hello i just came back from the apple store and they had to restore my phone and i just downloaded all my apps and music back but my photos that are on icloud i only got 80 out of 768 back. what do i do to get all of them back?
If you tried to restore to your iCloud backup and your photos didn't fully restore, first go to Settings>iCloud>Storage & Backup and make sure it isn't still in the process of restoring.
If the restore is complete and all your photos weren't restored, all you can do is try restoring the backup again. You might try the solution posted by ezjules in this discussion: https://discussions.apple.com/message/19518589#19518589. This involves opening the photos app after the phone restarts and you provide the passwords for your Apple IDs, then leaving it open for the remainder of the restore process. -
I have a slew of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document “001.MPEG” could not be opened. A required codec isn't available." Any advice on getting these to play? Thanks!
Try installing Perian or VLC. Some AVIs require a codec which simply isn't available for Mac OS X.
(85018) -
How can two users work on iMovie? My husband is working on a memorial video for a family member who passed, I plan to edit but he had to take his computer to work. I have the iMovie project on a zip drive. How do I get it to open in my imovie?
You will need an external drive that is formatted as MAC OS EXTENDED (journaled).
Move the Project, Events, and any photos and music to the external drive by following the instructions in this post.
https://discussions.apple.com/docs/DOC-4141
Be sure to use CONSOLIDATE MEDIA to get the photos and music. Then plug this drive into your computer and you will be able to edit. -
The camera screen on my iphone4s is completely blank. How do I get the phone back?
I used my camera twice yesterday. Once to take two photos and then a short video. Now when I open the camera app, all I get is a blank/black screen. No buttons, no pictures, nothing. Just blackness. How do I restore the camera?
Have you tried basics from the manual?
Restart, reset, restore.
iPhone User Guide (For iOS 5.0 Software) -
I would like to view the output from my DSLR on the screen of my macbook using the hdmi port. I know I can connect to a tv to send images "out" from my macbook, but is it possible ti send images in?? I operate my camera by remote control, and would really live a live view if possible.
ThankNope - you can only output video from your MBP - there's not a port for input.
Clinton -
I need help! when I am importing my NEF Raw files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support". The whole purpose of that button is so that the file can be recognized... How can I make the "copy as DNG" button work as it is supposed too?? Thank you
Thank you for responding. So I essentially will never be able to use that button in lightroom 5? do I need to get LR 6? Will there ever be an update for LR 5 that will enable me to use it?
Does DNG Converter work within LR or do I have to upload pictures to my computer and then make a second copy in DNG format. and then go into LR and use them?
Thank you @dj_paige -
i just restarted my mac then suddenly when it boots,disk utility came and says different option like repair disk, get help, reinstall OSX and I tried to click disk repair but it says that I am um able to repair the disk
It sounds like your hard drive either has a software problem that Disk Utility cannot fix or that the HD has failed (mechanically).
Your Mac may have booted either to your recovery partition or to internet recovery in an attempt to repair the drive- I can't tell from your post.
I'll assume that it was the recovery partition.
Try to boot into internet recovery (hold down option command R at restart), and see if you can repair your HD with Disk Utility. You should also repair permissions while you're there.
If that doesn't work, try to boot into single user mode (restart, hold down ⌘S until you see a black screen with white text) and repair your hard drive. Here's a reference with directions: Repair Your Hard Disk in Single User Mode | Everything Macintosh
If that doesn't work you have a few options:
If your mac originally came with installation disks, you can try to boot from the installation disk and then see if you can repair the HD.
There is a small chance that Techtool Pro 7 will be able to repair your HD if Disk Utility can't.
If none of that works then your HD has probably failed and will need to be replaced, which is not too difficult to do yourself if you can use a screwdriver. -
Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command + S, I get a looping "cannot mount errno = 19" message.
Problem started when I used Tech Tool Pro 6 to "de-fragment volume". Had to cancel that process before it finished because I ran out of time. Thereafter, when I startup my machine normally, I get the gray Apple logo at first, but it changes to a prohibited symbol (circle with a slash thru it) and hangs.
When I startup holding the Option key, I can see my internal drive, but I get the same results as above.
When I startup using the MacBook OSX Install DVD, it does not find my internal drive as possible destination.
When I startup using the MacBook OSX Install DVD and then run Disk Utility, it finds my drive, allows me to "repair" and says everything is fine.
When I startup with Command + S, I get a looping error message "errno = 19" and cannot stop it to do anything else.
When I startup from Disk Warrior v4.4, it does not find my internal drive to do any repairs.
When I startup from Tech Tool Pro 6 and run the "computer check" diagnostics, everything passes but the Volume Structure, which fails at "Volume Extents (B-tree)." When I use TTP's "Tools" option to run "volume repair" it will show my internal drive and allow me to click the GO button, but nothing happens and nothing changes.
I have a Time Machine backup on an external USB drive, but for as long as the internal drive doesn't mount, I can't use the backup to restore.It's a false report and should be ignored.
I would not rely on TT as I've already said earlier even before Grant posted similar advice.
I really think the Rigid Disk Block may be corrupted. This holds the partition map and could prevent a volume from being unmounted. Unfortunately, there is no way to fix that without repartitioning the drive which will remove everything. So, before going down this road I hope you have backups or can make a backup.
Drive Partition and Format
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Proceed with reinstalling OS X.
5. Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine. But I do not understand why it wont install mac os x 10.5????? PLEASE HELP ME. Thanks Hamid
Try a new post in the 10.5 Installation forum.
DALE -
I recently imported pictures from my camera to iphoto. I also synced my ipad. In less than 24 hours my photos are now missing from iphoto even after trying to sync my ipad again. These pictures are from a very special occasion and I did not even get time to edit. Someone help please
-Background-
My issue, which I resolved and may help you was the following:
I have an IPAD 3. I took over 5 GB of pictures on a third party camera. The car was full so I imported those pictures to my IPAD 3 and deleted them from the SD card. While on IOS 5.x, the photos on the IPAD were there under last imported.
Over the last few days, I upgraded to IOS 6. No issues.
Then, my family wanted to see the pictures from the trip. I went to the IPAD and could not find the photos. It listed 40 photos only. The last imported was there, but listed as empty. When I went into the settings>usage, it listed 5GB + of photos in the photos area. I was confused. I plugged my IPAD into ITUNES, first thinking I would get a backup asap (icloud was full after importing the photos). Then I though I would downgrade to IOS 5.
Also, itunes listed that I had 40 photos only, but 5GB of OTHER data. I was convinced the data was not lost. When I tried to browse the IPAD 3 using windows browser, the photos where NOT in the DCIM folder, so I was not able to simply "FIND" the photos and copy them to my PC.
-SOLUTION-
I downloaded third party software onto my PC called "http://www.i-funbox.com/" I fun box. I had no idea if this would work, but other forums with other issues called out similar products for iphone issues.
When I installed the program, which was free, and so far free of malware, I started to explore my IPAD file system.I found my photos, under IPAD>RAW file system>DCIM>100IMPRT.
-ROOT CAUSE-
I suspect when I upgraded to IOS 6, apple fails to register the IMPORT folder of photos as such, photos. So the file system in IOS looses sight of what is inside the last imported folder. Essentially removing them from applications such as "Photos". Why windows does not seem them, is beyond me. But the program I found did see them in raw format, and I was able to COPY them to my PC. Then I deleted them from the IPAD, because I had no other way of managing this folder in IPAD, and it was using a lot of space. -
i use a macbook pro which came with facetime i have an iphone 4S as well. whenever i use the wireless on my iphone i can facetime with ease however when i use the same wireless for my mac to facetime the call always gets disconnected.
To use factime on your Mac, I believe you will need to use your email address to do so instead of your wireless number. Since you can't make calls on the Mac.
Maybe you are looking for
-
"Cannot update iPod because the selected playlists no longer exist"
That is an error message I'm now getting. My iPod is erased but iTunes works fine. How do I fix this? (I've already restored all settings, updated, software, etc.) HP Windows XP
-
I am trying to set up the Orchestrator Connector for Service Manager, when running the test, I get the error <h2>401 - Unauthorized: Access is denied due to invalid credentials.</h2> <h3>You do not have permission to view this directory or page us
-
Have done everything possible, spent hours reading every tip possible. What can I do, is Apple aware that lots of folks who did not update to IOS6 lost their WIFI on the 18th?
-
Dear Gurus i am facing one problem, i have delted one purchase requistion after that when i try to make purchase order using same Purchase requistion which I have deleted.system allow me to make the PO using that PR I want to remove such abnormal be
-
This MAY be a Photoshop CS3 issue, so forgive me if it is, but I can no longer see image dimensions in the (Leopard) finder. The problem seems to have started when I upgraded to Photoshop CS3, but I upgraded to Leopard just a few days prior to the CS