Is it possible to get an explicit title in my Web Q instead of "Ad Hoc" ?

Hi all,
I created a web query ( using Query designer ). What I want is to put a more explicit title on the varibale screen of my query ?
Is it possible to do that, instead of "Ad Hoc query"?
I know this is possible using WAD but I don't want to loose the Excel/CSV functionality.
Thx
Regards,
Erwan

Erwan,
the template being called would possibly be 0query_adhoc or 0query_template , you could try modifying that...
otherwise if the only reason for you to use the default template is to have the export to excel and csv functionality , you can have them incorporated as buttons on any template...
Arun
Hope it helps...

Similar Messages

Is it possible to get calendar appointment to have to be dismissed instead of going away once you unlock phone?

I'm looking to see if it is possible to get calendar appointments to stay on the notification screen instead of disappearing once the phone is unlocked. Basically I want to have to dismiss all appointments on my phone. Is this possible?

If you go into Settings>Notifications>Calendar, you can set that notification alert style to Alert, which I believe causes you to have to dismiss the alert before you can do anything else on the device. It will take me a couple of minutes to test this, since it will require me to make some changes to my device, but you might want to look at that. When you receive a notification for a calendar alert, I know you can swipe that alert and I see that individual calendar appointment displayed on the screen. I'm not aware of another method to display your daily calendar on the home screen when getting notifications.
EDIT: I was correct. If you just unlock the phone, this dismisses the notification and will bring you to the home screen, no other information about the appointment. However, if you do not just unlock the phone and swipe the calendar notification on the screen it will bring you to that particular calendar notice. It will not, however show you other future appointments. That would require you to enter the calendar application.

Is it possible to get Apple Keynote to show the presenter display instead of just the slides when I record audio using Play - Record Slideshow?

Rather than giving a presentation with an external monitor, I want to sit at my desk and record a presentation for distribution like a podcast. When I click record to add the sound to the presentation I see the slide show on the screen while recording instead of the presenter display. I would like to watch the presenter display while recording so that I can see the next slide as I record. There doesn't seem to be any way to record and watch the presenter display without having an external monitor attached. Does anyone know how to get the presenter display to show while recording without an external monitor?

I also needed to view presenter notes while recording a presentation on my Macbook Pro and could not find a solutions, but I did find a pretty good work around.
I downloaded the Keynote Remote app for my iPhone. I am now able to start recording on my laptop and then hit start slideshow on my iphone to view a portrait mode version of my slides with presenter notes below. I use my phone to flip through slides and slide builds while I'm reading through my presenter notes. When I've reached the end of the presentation I hit esc on my Macbook Pro and I'm done. I'm then able to export the recorded presentation as a Quicktime video and post it on our website, which is exactly what I set out to do.
It takes a little bit of coordination to get used to this method, but I don't need to have a projector or second monitor because my phone takes on the second monitor role.

How do I get Firefox to print the entire web page instead of truncating when it gets to end of first print page?

Firefox 3.6.8, Windows XP Pro
Frequently when I try to do a print of a web page, I end up printing only whatever fits on the first printed page. Instead of continuing to later pages as needed, the rest of the displayed web page is simply ignored.

See Tools > Options > General > Startup: "When Firefox Starts": "Show my home page"

Is it possible to get a refund if i bought an album with extremely bad sound quality?

As asked in the title, is it possible to get a refund if i bought an album with extremely bad sound quality?
I am very unsatisfied with my latest purchase of the album "Never take ffriendship personal" by "Anberlin" ...
I can find all the songs in much better quality, even on YouTube ...
I bought two other albums by Anberlin at the same time, on which the sound quality is much much better and perfectly clear.
is it possible to get some sort of refund ???

http://support.apple.com/kb/HT1933
Regards.

Is it possible to get a refund on a digital download pre-order.

As the title says. I pre-ordered the Destiny Digital Guardian Edition from a Best Buy store on August 1. I have since had a credit added to my Amazon accout and would like to purchase the DDGE from them instead because that credit makes the game about $35. Is it possible to get a refund? I don't see anything the return policy specifically mentioning digital pre-orders.
Thanks in advance

Hey again PhazeDelta1,
Like zztoluca mentioned, digital content typically cannot be returned or refunded once it's been fulfilled. Pre-orders, on the other hand, can be cancelled any time prior to delivery. If you haven't already done so, I'd encourage you to stop by your local store and to speak with a rep at the customer service desk -- I have confidence they'll be able to help you out.
Let us know if you have any other questions!
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

Getting the Process-Title (WD)

Hi,
how can I get the actaul process-title in a web dynpro application.
In the GP-API I found the interface IGPProcessInstanceInfo but Im not able to get an intance of this.
I tried out the following, but theres no possibility to get the IGPProcessInstanceInfo.
runtimeManager.setCustomProcessTitle( executionContext.getProcessId() , newTitle);
IGPProcessInstance actualInstance = runtimeManager.getProcessInstance(executionContext.getProcessId(),executionContext.getInitiator() );
Thanks for helping me
Steve

Hi Aliaksei,
my only wish was to get the process-title.
So I searched in the API to get informations how to get the title. And I found no way to get it, because there was no method getTitle() only in the interface IGPProcessInstanceInfo, which I cannot achieve.
Meanwhile I found the method, you proposed me, in the API too.
Thanks in advance

I've recently been given a macbook pro from uni, with lots of adobe software on. I want to pair it with my iMac which has music etc and is it possible to get the software to the imac and the files to the macbook?Giving me the best of both :-)

I've recently been given a macbook pro from uni, with lots of adobe software on. I want to pair it with my iMac which has music etc and is it possible to get the software to the imac and the files to the macbook?Giving me the best of both :-)

You would need the original installation disks or files for the Adobe software to get it onto your iMac, and having it on two computers may not be allowed by your university's licensing. Talk to whoever issued the MacBook.
As to the music, just copy it over to the MacBook, either via Home Sharing, file sharing, or an external storage medium (hard drive, USB flash drive, etc.).
Regards.

Is it possible to get a refund for a case i bought at the store but its not an apple product?

I bought a kate spade plastic case at the store 2 months ago and even the first day of having it on my iPhone I had multiple issues with it. However, I couldn't return it because I was away at school. I went into the Apple store and asked about the possibility of getting a refund for the case but they said it was a third party product and to contact the manufacturer. I called kate spade and since i wanted a refund and purchased at the apple store there was nothing they could do and to ask the apple store for my money back because thats where I purchased it. Am I ever going to get a refund and what should I do at this point?
Thanks
Sara

http://support.apple.com/kb/HT1933
Regards.

Fbl5n profit center is cracked , itz possible to get profit center value

fbl5n profit center is cracked u , itz possible to get profit center value
in ur zfbl5n report
der r few changes in program to b made
Message was edited by:
Ronei Shedi

Hello Ronei,
No need to make a copy of the FBL5N to have the profit center in the list.
You can have it in the ALV Layout.
Select profit center in the Hidden fields column and pass it to left hand side column.
Save as a Display Variant.
Next time when you run the FBL5N, select your display variant in the last frame "List Output".
Regards,
Naimesh Patel

MacBook Pro battery had accumulated more than a 1000 charges, and stopped functioning unexpectedly. Went and got the battery replaced. Just saw that SMC Firmware 1.6 update deals with this. Possible to get my money back?

MacBook Pro battery had accumulated more than a 1000 charges, and stopped functioning unexpectedly. Went and got the battery replaced. Just saw that SMC Firmware 1.6 update deals with this. Possible to get my money back?

The firmware update corrects an error that may occur, however the techs would have checked the condition of the battery prior to installing a new one. If the battery was questionable, the firmware update was really not too important.
You can check the battery condition by going to the apple, left side of the menu bar, About This Mac, More Info, System Report, Hardware, Power and see what it says about Cycle Count, Condition, Capacity: Condition anything but Normal needs to be checked and may need to be replaced.
The cycle count of 1,000 charge cycles is the typical life of a Lithium-Ion battery, the point at which the capacity drops to 80% of the as built capacity.

Is it possible to get view in RULES

Hi.
Is it possible to get userView in rules.If any one come across this please post piece of code..
Thanks in Advance
Yash

Try something like this:
 
<set name='user'>
<rule name='checkoutUserView'>
<argument name='accountId' value='$(accountId)' />
</rule>
</set>
 
<Rule name='checkoutUserView' authType='EndUserRule'>
<RuleArgument name='accountId' />
<block>
<defvar name='viewMaster' />
<set name='viewMaster'>
<new class='com.waveset.session.ViewMaster'>
<invoke name='getLighthouseContext'>
<ref>WF_CONTEXT</ref>
<ref>accountId</ref>
</invoke>
</new>
</set>
<invoke name='setAuthorized'>
<ref>viewMaster</ref>
<invoke name='getBoolean' class='java.lang.Boolean'>
<s>true</s>
</invoke>
</invoke>
<invoke name='checkoutView'>
<ref>viewMaster</ref>
<concat>
<s>User:</s>
<ref>accountId</ref>
</concat>
</invoke>
</block>
<MemberObjectGroups>
<ObjectRef type='ObjectGroup' name='All'/>
</MemberObjectGroups>
</Rule>
 
In order to access the user object using dot notation you may need to call this piece of code (not sure if necessary if the variable being used is defined in the task definition):
 
<invoke name='setVariable'>
<ref>WF_CONTEXT</ref>
<s>user</s>
<ref>user</ref>
</invoke>

Is it possible to get the style, font and related info of a paragraph of a in design file and write it on the same in design file on the left side

Is it possible to get the style, font and related info of a paragraph text of a in design file and write all the stuff on the same in design file on the left side with small fonts
as
Lets this is a text in in design file    :
style : abc                      we are going to check the condition Agence Wallonne pour la Promotion d'une Agricultur we are going to check the condition Agence Wallonne pour la    font 12                                  d'une Agricultu we are going to check the condition Agence Wallonne pour la Promotion d'une Agricultu
style : xyz                      we are going to check the condition Agence Wallonne pour la Promotion d'une Agricultur we are going to check the condition Agence Wallonne pour la    font 10                                  d'une Agricultu we are going to check the condition Agence Wallonne pour la Promotion d'une Agricultu

Hi Poojith
Not sure if this would solve your requirment but just in case might be helpful:
1. We can mix up the HTML and HTMLB components in the JSP Page. However, can access only the HTMLB components in the controller. The following link refers to what customizations are offered by the HTMLB framework:
[http://www.sapdesignguild.org/resources/htmlb_guidance/]
2. Another option would be to use AbstractPortalComponents or a simple web app if that's feasible. (where custom UI themes, css and layout are more in control of the developers.)
Thanks
Deepak

XML DB: is it possible to get a row for each element in a container element?

I have an XML document containing a container element (collection). If I query, using an XPath expression, the contained elements I get a row for each container element with the contained element concatenated. Is it possible to get a row for each contained element?
I run this simple query:
select extract(xmltype('<colors><color>Red</color><color>Green</color></colors>')
, '/colors/color/text()').getstringval() from dual
And get this result:
EXTRACT(XMLTYPE('<COLORS><COLOR>RED</COLOR><COLOR>GREEN</COLOR></COLORS>'),'/COL
RedGreen
1 row selected.
What I would like to have is:
Red
Green
2 rows selected.
Wishful thinking or possible? Many thanks!

Sure. This is where our XMLSequence() function comes in. It allows you to treat the top-level nodes in a nodeset as if they were rows in a table when combined with the TABLE() operator. Here's an example.
First, to make the SQL look a little cleaner, I like to define a function like this:
create or replace function testdoc return xmltype as
begin
return xmltype('<colors><color>Red</color><color>Green</color></colors>');
end;.
To break out the nodeset of <color> elements as a table, we use the following query:
select value(list_of_color_elements).extract('*/text()').getStringVal() as color
from TABLE( XMLSequence( extract(testdoc(),'/colors/color'))) list_of_color_elements.
Or, using the new-in-9.2 extractValue() operator so we don't have to remember the text() part:
select extractValue( value(list_of_color_elements), '.') as color
from TABLE( XMLSequence( extract( testdoc() ,'/colors/color'))) list_of_color_elements.
Here the TABLE(XMLSequence(...)) combo produces a table of XMLType, with one XMLType object in each row of the table.
In general, if the XMLType instance were coming from an XMLType table xmltab the query would look like this:
select extractValue( value(colors), '.') as color
from xmltab x, /* Important that this table comes earlier in the FROM clause! */
TABLE( XMLSequence( extract( value(x),'/colors/color'))) colors.
And if the XMLType were instead in a column of XMLType named doc in a table xmltab, then we would have the syntax:
select extractValue( value(colors), '.') as color
from xmltab x, /* Important that this table comes earlier in the FROM clause! */
TABLE( XMLSequence( extract( x.doc ,'/colors/color'))) colorsOnce you get the hang of it, you'll see that the combination of TABLE(XMLSequence()) to "shred" XML nodes into rows, and XMLAgg() to aggregate fragments of XML across multiple rows back into a single document, is quite powerful.

HT1222 Is it possible to get the SSL fix without having to install ios7 (which I tried and hated) or jailbreaking the devices?

I have a few ipads, iphones and ipod touches of various models, and all run iOS6 of various types (whatever they were running when I last updated them before iOS 7 came along and stopped me being able to get newer versions of 6).
I tried iOS7 for a while but hated both the appearance and some of the things that changed.
My ipods have updated to a new version of iOS6 with the SSL fix.
I can't seem to get this option for the ipads or iphones.
Is it possible to get the important SSL update for iOS 6 for iPhone5, iPad3, ipad4 and ipad mini (not retina) without having to go to iOS7?
(It seems that I can get a fix by jailbreaking but I really don't want to do that if there's another option since I have no need for it otherwise.)
Thanks a lot.

Thanks, that's helpful. I expected that answer, since I read a load of stuff about Apple pushing people to get iOS 7 despite it having people who disliked it, but was hopeful it was not the case
Some of the changes, like to calendar were just frustrating.
Not a big problem though - just means that the next phone and tablet hardware update I get won't be apple.
Thanks a lot for the swift and helpful replies.

Is it possible to get an explicit title in my Web Q instead of "Ad Hoc" ?

Similar Messages

Maybe you are looking for