Is it possible to get Siri to work with 'old' Car handsfree systems?

Is it possible to get Siri to work with 'old' Car handsfree systems?
Unless I'm missing something - Siri doesn't work well with older handsfree car systems - as typically the cars built in system handles the voice control and relays the request to the phone over bluetooth protocols. I tried initiating siri standalone while connected to the car and it failed.
I was hoping I might be able to do some sneaky like 'Call Siri' to enter Siri mode but it doesn't seem to work.
I'm guessing future Car handsfree systems will be Siri aware - but making Siri work with older systems (and my car isn't old - it's a 2011 model) would be very useful.
Has anyone come up with a workaround? I really don't want to have to buy or use a bluetooth ear piece
Thanks
Adam

I never heard anything on this and so am still unable to use Siri without touching my phone.

Similar Messages

PDA Bluetooth keyboard: possible to get it to work with Arch?

Hello there,
I have an old Bluetooth keyboard that was originally intended to be used for one of those Palm PDAs that came out like six or eight years ago. I successfully paired this device with my Laptop (Thinkpad X60t). However, the only service exhibited by this device is "SPP slave". The keyboard doesn't identify as a HID, as it seems. I don't know the exact model; it's one of those foldable models by GeneralKeys.
Using sudo cat /dev/rfcomm0, I can verify that key presses on the keyboard actually reach my laptop. However it's all gibberish, e.g. pressing the sequence hjkl<enter> results in the string (g)h*i+j.m being output. Is there any way to somehow to convert/attach this device's output so that I can use the keyboard as a proper HID?

Natanji wrote:...Is there any way to somehow to convert/attach this device's output so that I can use the keyboard as a proper HID?
I am not familiar with the device, but from your description, I would say it is unlikely. Your device appears to be using an SPP (Serial Port Protocol); It is much simpler than a HID implementation.
You might look to see if the system creates an event interface in /dev/input when you associate the keyboard. If so, it may be possible to do something with evdev.
I cannot offer any suggestions, except that it would make an interesting project.

I just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

i just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

Did you enable Siri in settings?
Settings > General > Siri > ON
If Siri is off, all you get when pressing the home button for 1 second is the old Voice Control.

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Why can't I get Siri to work on my iPad !

Why can't I get Siri to work on my iPad ! Does it not come with $ 450 model I have ?

Sorry but when they made siri it was with iPad 3 you see I have an ipad 2 aswell and I thought that siri wasn't working then I too king it back to Argos and they told me that siri isn't supported on the iPad 2 only ipad 3 and newer

How do I get Siri to work on new iPad. Downloaded 6 but is not there.

How do I get Siri to work on new iPad. Downloaded 6 but is not there.

Bama, you're going to have to do a little of this work for yourself.
Here's how to set up Siri on an iPad 3:
http://apple-ipad-tablet-help.blogspot.com/2012/06/setup-siri-on-new-ipad-3-with -ios-6.html
Read it carefully, OK?

Is it okay if I jailbreak my iPhone 4, download a Siri port and use a friends Siri certificate to get Siri to work on my iPhone 4??????

Is it okay if I jailbreak my iPhone 4, download a Siri port and use a friends Siri certificate to get Siri to work on my iPhone 4??????

There is no support for jailbreaking or for jailbroken iPhones on this
forum. If you proceed, you are on your own with any problems and have
voided your warranty.

How do I get iCloud to work with my mac that has snow lepard and is pre intel?

How do I get iCloud to work with my mac that has snow lepard and is pre intel?

Richard Kerns wrote:
And it kills me that a friend who has pc computers and just has an iphone and ipad can breeze through all this with no problem and he still has XP. So Apple goes back and helps old OS for pc but not for it's own kind!!!
Richard, I agree with you 1,000%. I wrote this in a forum a few weeks ago, when a user was complaining about Snow Leopard not supporting iCloud:
Why is it that if I bought a Mac before July of this year, I must pay to upgrade my operating system in order to take advantage of iCloud? Meanwhile, a Windows Vista SP2 user, who bought a new computer in May 2009, already has everything they need on their computer to use iCloud.
Why was it possible for Apple to write a free iCloud Control Panel that was compatible with existing versions of Windows, but Mac users must buy an entirely new operating system?
If Apple gave Mac users the same amount of backwards compatibility that it gives to Windows users, people with OSX 10.5 (Leopard) would be able to use iCloud. That's something to think about the next time you go to purchase a new computer.
(P.S. Something else to think about: If you bought a Mac before October 2007 (when OSX 10.5 was introduced), your computer won't run iTunes 10.5 unless you buy an upgrade. But a PC user, who purchased their computer as long ago as Sept. 2004(!), can run iTunes without an OS upgrade.)
I got so angry thinking about this, that I ended up writing an angry note to Apple on their feedback page. After repeating what I just wrote here, I asked them to commit to providing at least the same level of support to Mac users that they do for PC users when it comes to their cross platform products (iPhone, iPad, iCloud, Apple TV, Safari, iTunes, etc.) And, really, is that so much to ask?
I wish I knew how to start a petition requesting that Mac users get comparable treatment as PC users. But then again, shouldn't that go without saying?
Please leave feedback about this revolting double standard on the Apple feedback page. They should be thinking long and hard about why their own customers are treated worse than the customers of their competition.

How do I get fios to work with my new desktop w/ Windows Media Center

Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
** computer specs**
Product number NZ017AA
Introduction date 30-Jun-2009
Country/region sold in: United States,Canada
Hardware Base processor
Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
Chipset AMD 780G
Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
Power supply 300W
Memory
Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
Wireless Wireless LAN 802.11 b/g
Video Graphics Radeon HD4350
512 MB DDR2 memory
I/O Ports: HDMI, VGA, single-link DVI
Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
Sound/Audio High Definition 8-channel audio
ALC 888S chipset
Network (LAN) Integrated 10/100/1000 Base-T networking interface
Memory card reader
Contains an Infrared receiver for remote control
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
I/O ports on the back panel
Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
Drive bays
Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

Based on what you've posted, your computer does not have the right tuner. You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
QAM tuners to record local channels only
This requires Windows Vista or Windows 7
Hauppauge WinTV-HVR-2250
SiliconDust HDHomeRun (info on a sale)
CableCard tuner to record local and cable channels
This requires Windows 7 + one CableCard from Verizon for $3.99/mo
ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
Make sure your computer has Windows 7 Home Premium (or better) installed. That's necessary to support CableCard tuners.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

I have a Power Mac G4 and i am trying to get it to work with my LCD

I have a Power Mac G4 and i am trying to get it to work with my LCD Monitor/TV. The connection on the computer is DVI and the connection on the Monitor is DVI. The Monitor says in the manual to hook up computers using the DVI connection. When I connect the too the monitor says there is no video input. I tried changing the settings on the monitor from PC mode to DVI mode and nothing. I have also tried changing the display on the computer to a couple of different settings and nothing. Please Help?

Hi-
A little more info please.
What model G4?
What Graphics card?
What OS?
What model/make of monitor?
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, 23" ACD, Ratoc USB 2.0, QCam Ultra, Nikon Coolscan

I need help with ISIGHT! I can't get it to work with MSN!

HI,
My issue is this... I have AIM/AOL and I am able to see myself on webcam.. however noone else can unless they HAVE a webcam... My first question is- "DO you have to have a WEBCAM on both ends for both people to see you?" Does the person I am chatting with HAVE to have a webcam to see me? If so WHY? They should atleast be able to see ME if I want them to... Also if they are using windows for PC platform... can they use a pc webcam and still connect with me through my isight although I am on a mac?
My second major ISSUE is.. WHY is the isight only compatible with AOL/AIM? I was told when I bought this it would be compatible with MSN Messenger for windows AND the MAC version... I have both and the isight does not show up on it... CAN ISIGHT be connected to msn messenger for MAC??? PLEASE help me!
I called APPLE tech support and they couldn't even help me! They told me to call Microsoft! Anyhow- one guy did say he was able to get his ISIGHT working with the MSN messenger for MAC platform.. do you have ANY idea how to do that?? The thing is ALL my freinds are on PC's and have MSN messenger..
ALSO- someone on mac rumors told me to look for a guy names RALPH! Said you know A LOT about mac and pc compatibility! PLEASE HELP
Bottom line - I want to use isight with msn so my msn pc friends can share webcam... I also have virtual pc software... is it easier to just get a pc webcam and do it through there? ( i tried that and it didn't work either) i need major TECH SUPPORT!
THANK YOU

Microsoft's Messenger for Mac (MSN) does not support webcams at all.
I have found the best alternative to MSN to be aMSN with macam for the webcam driver (it is a cheap usb webcam). Both are free open source projects. I guess if you use an iSight you will not need macam.
aMSN can be found here: http://amsn.sourceforge.net/
macam can be found here: http://webcam-osx.sourceforge.net/
The speed is substantially faster and it is far more stable than Mercury in my experience.
The only difficulty is the camera is often shown as being "in use by another application". To counter this I start macam, then plug in the camera (or unplug and plug back in). Then I start aMSN.

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

Care to share which OS you are using?

How do I get FF to work with Mod Organizer (for mods used with ES: Skyrim)? I get an error message that it can't understand the address given.

I am an avid Elder Scrolls fan and am using the new STEP 2.2.9 setup. They've gone to Mod Organizer (MO) and I cannot seem to get my FF working with the download mod portion of things. I click the "earth" icon, which takes me immediately to the Nexus Mod files page but when I choose a file to download after clicking "Download with Manager" I get this error message:
The address wasn't understood
Firefox doesn't know how to open this address, because one of the following protocols (nxm) isn't associated with any program or is not allowed in this context.
You might need to install other software to open this address.
The address given, when clicking "Download with Manager" begins with nxm://Skyrim/mods/ The address is such due to trying to download with the manager.
Any help will be greatly appreciated! I've pulled my hair out for the last few hours trying to find a fix. I've disabled Adblock, all other popup blockers and enabled the main address in my exception rules. It's just not working. Ugh!
Thank you in advance!

In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
* http://www.nexusmods.com/skyrim/mods/modmanager/
In case of problems with this third-party program, please refer to its support forum:
* http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat

Is it possible to get Siri to work with 'old' Car handsfree systems?

Similar Messages

Maybe you are looking for