Is it possible to go higher than 200FSB on K7N2Delta-ILSR?

Hiya,
As subject title says really, according to the manual, 200FSB is the max you can set it to...
I'll be using a Mobile Barton 2600+ And was hoping for at least 210FSB speed with a reduced multiplier...
Is it possible?
Thanks

I have managed to keep 221FSB stable on my mobile that is 133FSB stock with the Delta-ILSR. You always need to run 1:1 Dram Ratio. since you have 2 diff speed your ram if you go over 200FSB you will be overclocking ram also or 2 sticks of it anyways. Your best bet is set 1:1 and put FSB to 200 and try for a 11.5 or 12 multiplier for best performance.

Similar Messages

Is it possible to raise the bit rate of songs higher than 256 on iTunes? If not what should i use or do to raise the bit rate of songs?

Is it possible to raise the bit rate of songs higher than 256 on iTunes? If not what should i use or do to raise the bit rate of songs?

Songs you rip from CD can have their bitrate increased to a maximum of 320Kbps from the iTunes preferences; alternatively, the default encoder can be changed to a lossless one. Songs from other sources have a fixed maximum bitrate.
(67928)

Is it possible to upgrade to higher than "snow leopard" directly?

My MacBook is not what it used to be. I've had it for four years now and have not upgraded the OS, so it is still on Leopard. Is it possible - and how much does it cost - to upgrade to higher than "snow leopard" directly? In which case, how do I do it?
Thanks guys!

Hi Maria,
Any newer oSX is going to slow you down, but may be useful, but you need 10.6 & update it to 10.6.78 to go any higher.
You need to get 10.6 & update to 10.6.8 first to be able to buy it from the App Store & download it.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
You have to get 10.6.8 first to go even higher to 10.7 or 10.8

Tv@nywhere Master - Cant capture higher than 352X288

Hi
I have a Tv@nywhere Master and i cant capture any higher that 352x288 resolution.
I tryed VirtualDub and Adobe Premier . They both say : Unsuported Video Format when i try to select 640x480 or 720x576 . (PAL mode)
The original software (MSIPVS) lets me choose the format and resolution but i dont want to use it because it offers poor quality.
I am capturing from VHS at maximum quality possible and storing it in AVI uncompressed and then use TMPEGenc to SVCD.
Can anyone comment on this ?
Doesnt this board capture higher than 352x288 ???
Thank you
Filipe

I use it in 768x576 without any problems
you just have to look for a Use Smart Tee Filter setting because the card can`t both capture and preview over 288 so you`ll need to split the data on the Capture pin in order to provide preview over 288 lines.

Why are some cells in my spreadsheet higher than others? There's like extra space.

Why are some cells in my spreadsheet higher than others? There's like extra space.

DreamLife,
you can adjust the row height byt selecting the separator between rows. It is possible you made this adjustment accidentally. To se the row height to be the same as other rows select a row that has the height you want:
Then open the table inspector. Look at the row height and note the value. Now select the row (s) you want to adjust, then change the "Row Height" value in the table inspector. To view the inspect select the menu item "View > Show Inspector"

How to install software higher than 1.1.5 (4B1) to my ipod touch

Is it possible to install software operating system to my iPod touch first generation higher than 1.1.5 (4B1)?

You can go as far as iOS 3.1.3 and you get that here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

Has anyone had any luck compressing videos with resolutions higher than 1080?

Everytime I try, it fails instantly. Is this not allowed in Compressor 4? It was possible in Compressor 3.

I have a 4K video that I'd like to compress using H.264 or X.264 and restrict the data rate.
Here are some details of the video (created in Motion) I am trying to compress:
DIMENSIONS: 4096 x 2048
FORMAT: H.264
FPS: 24
DATA SIZE: 53.2 MB
DATA RATE: 52.03 MB
and here are settings that I would like to compress it with using Compressor 4.0.4:
CODEC: H.264 or X.264 (both fail)
FRAME RATE: current
KEY FRAMES: Automatic
DATA RATE: Restricted to 7000 kbits/sec (setting it to automatic or any other data rate also fails)
QUALITY: Best
HEIGHT AND WIDTH: 100% of source
I have been able to get a successful compression with this 4K video file using ProRes 422, so that leads me to think this is a codec problem, not a Compressor application problem. Furthermore, I have had the same problem just using Quicktime 7 to export a video with these settings, I get the same failed results.
In Compressor it gives me the message Failed: Quicktime Error: -108
and in Quicktime 7 it gives me the message Failed: qKitErrorCatchAll (-6662)
So, if you had any suggestions about a better codec to use, one that allows me to restrict the data rate on higher than 1080 video files, it would be much appreciated.
Thanks
Evan

Create variant for VL10b for max delivery date higher than 30 days

Hi expert,
I want to create a variant for the transaction VL10b with a max delivery date higher than 30 days.
The standard transaction make 30 days as default.
How can a proceed?
Thanks for your help.
Regards,
Haja

Hi Haja,
From the moment you run your variant via transaction VL10B, the delivery creation date
range will get the values saved in your variant. In a second step, when you click
on "Purchase Order" Tab, the system will re-determine the Delivery creation date
range taken into account the fact that field CalcRuleDefltDlvCrDt is empty and that
MaxDelivCreateDate (visible in the variant) is equal to 30.
Please note, the date calculation is being influenced by 2 factors :
-The MaxDelivCreateDate field whose default value can be modified in 2 different ways:
a) either in customizing via transaction VL10CUC
or
b) manually, after unchecking the "Use list profile" check box in the user role of VL10.
By doing this, the field will be made visible and can then be manually modified.
Afterwards, the date calculation is also controlled by the rule defined in CalcRuleDefltDlvCrDt field. You can then possibly also set this field to blank or define your own calculation rule via an
user-exit (include V50R_USEREXIT_PREPARE). If the rule is set to 2, then regardless of the
value stored in MaxDelivCreateDate, the date range will only cover today and tomorrow.
These are the only 2 influencing factors for the program (not the variable type in the variant). Please try any combination you may need and this should suit your needs.
BR,
Enrique

Scxi 1112 can not acquire correct data at high temperature(higher than 700C)

A scxi-1112 module in scxi-1001 chassis is used to acquire oven Temperature. Software is LabView 8.5. when oven is ramping higher than 700C, the module gets wrong data, the data acquisition VI shows random values around 700C.It seems the scxi-1112 module "reaches" its maximum setting, which actually is 1000C. Can Anybody explain what's happening to me? Thanks.

Hi gq,
Could you please provide a screenshot of the
way you are configuring the task, as well as what the data looks like
that you are seeing when it behaves incorrectly? If you just perform a
voltage reading (instead of a temperature task), what values are
returned, and does it show the same behavior of reaching a certain
voltage and not ramping any higher? Also, how do you have your
thermocouple attached to your oven; is there any possibility that the
connection is conducting at that temperature? Also, regarding the use of different measurements in the task, are you using different modules in your system or are the measurements being done on the same 1112 module? Additionally, have you tried other channels and received the same problem? I look forward to reading your response.
Regards,
Daniel S.
National Instruments

High than 16 MIDI channels.

Hello,
I have created several orchestra files in Finale which allow up to 128 MIDI channels. I'm only using and hoping to use 32. I realize the original MIDI specs allow for only 16, BUT
but Finale, and Home Concert Extreme allow for more using A and B or other multiple sets of 16 structure.
QUESTION: In there any way to Assign a higher-than-16 midi channel to a Region or Track in Logic Pro? Kind of like a Maximum number of x. parameter, only for MIDI channels.
I have two applications ready and willing to open, understand and correctly channel these higher-than 16 channels embed files.
Please help if possible.

Gentleman, thank you for all the help.
Here is my studio configuration.
I am Using Home Concert Extreme ( a change of tempo following software) to Play (meaning read without editing ) an underling MIDI file. These underlying MIDI files are created by FINALE can have 32 channels ( i think), or they may just have 2 separate tracks per channel. And some are created by Logic. It doesn't really matter.
WHen I "open" these files in Home Concert Extreme, I have to re-channelize half the tracks form MIDI A to MIDI B. Kind of like separating conjoined twins.. 2 come in together.. but then are re-directed to live separate lives.)
ANYWAY... Here is the BUG. I am trying to play these in software HomeConcertExtreme BUT use the SOUNDS (virtual instrument settings) in Logic Pro which are infinitely superior to the default of QuickTime GM Synth sounds.
So... got some advice to use the IAC Driver.. did.
I got some advice to check "Auto demix by channel if multitrack recording." Under Settings> Recording.. Did that too. Works perfectly for fewer than 17 channels.
So am not using an external sound card, nor am I using an external MIDI interface to play back.
Its going from HCX to IAC Drive to Logic all in the computer.
Here is how logic is responding:
I have 2 different channel 12's set up in HCX
A-12 is for Piano LH
B-12 is for Violin
in Logic I have
Instrument 12 channel 12 all laid out nice in anticipation for the piano notes, and
Instr. 28 channel 12 all laid out for the violin notes.
Unfortunately Here is what I get.
If both tracks are record enabled in usually de-mixes properly.
But if the piano is not enabled both the piano notes and violin notes sound like Violin.
if the violin is not record enables both the piano notes and violin notes sound like a piano.
Is this going to happen CONSISTENTLY as a rule?
Just for kicks, in the environment, I change the track that I laid out for the piano in Logic (instr 12 channel 12
to instrument 12 channel 13 and it still played the piano notes but on a different sound -
organ.
Just for kicks I then changed the piano track to instrument 16 channel 16 and the piano notes still followed me.
Where are the rules?
How does it channelize?
Does each in coming channel just look for the first available (record enabled) channel and jump on it; like the characters of Space Balls jumping in emergency escape pods.
How can I count on a 24 channel orchestra to all find their instruments???????
please help.
-Curtis

Possible to pull higher resolution single frames from movie?

Hi.
I am currently using iMovie HD 6. I am wondering if it is possible to pull a higher than 72 dpi frame for still picture purposes? Command "F" doesn't seem to give options for higher resolution.
Would moving to Final Cut Express give more still picture options?
Any ideas welcome.
Thanks for any replies in advance.
Thomas

Images in video are defined by their pixel dimensions, for example -NTSC DV is 720x480 non square pixels - which is the square pixel equivalent of 640x480. It really doesn't matter if this is output at 72dpi or 300dpi as it is still 720x480. You get what the camera recorded - no more.
If you need higher quality images (ie more pixels) take still images on the set. Even throw away point and shoot cameras will record an image with more pixels than any video format.
good luck.
x

Case temp higher than cpu?

I'm on my second board now. I sent my first one back because I couldn't get USB working.
I initially had problems with my replacement board. My onboard LAN wouldn't work with win2k even after all the patches and driver updates. I fixed it by installing winXP. Now everything is finally working as it should except for my temps.
For some reason my system temps are always higher than my CPU temps. Is this right?
On speed fan I have the following:
CPU temps @ 27-35c
Case temps @ 38-47c
I even checked my temps on my motherboard bios and they say the same thing. My first board had the same problem. Did I plug something in wrong or am I going crazy?
My CPU has a retail Intel HSF and I used Arctic Silver 5 thermal compound
My case has the following:
2 80mm intake fans on my front panel,
1 80mm intake fan on my side panel (right on top of the HSF)
1 80mm exhaust fan at the top (blowhole)
1 120mm exhaust fan at the rear.

from idle, which temps increase the fastest when running something like prime95? whichever one it is, would be the cpu temp.. you can do this test to see which is the cpu reading and which is the mobo/system reading.. better yet, take the side panel off so that you know the system reading will not change so quickly.
thats how i configured speedfan when i first got this board. but now there is a good guide here for setting it up with the right thermal probes etc etc.
my temps... well the rig is continuously setiing (well, while its on anyways, the highest ive seen it go is roughly 46degrees - cpu and 32 degrees - system).
ive got 1 120mm @ 7v as a front intake,
and errm thats basically it! haha theres 3 fans on the psu and yeah, not a hell of a lot more. the cables are neatly tucked away as muhc as possible to not hinder the airflow. im thinking of putting in 1 side intake - but probbaly not yet. wait till uni is over..

Current credit limit higher than maximum permitted

I am looking at a customer in transaction FD32. It appears that the customers' current credit limit assigned is higher than their maximum permitted credit limit.
i.e. current credit limit = $22,000
maximum permitted = $20,000
This has occurred for several customers. How is this possible? Can the current credit limit be decreased back down to $20,000?
Thanks,

Hi ,
Kindly note that the field KNKA - KLIMG , refers to the credit limit for all the credit control area for that customer , and the KNKK-KLIMK Upper limit for the recievables in that particular credit control area ,hence for the example mentioned the sum of the credit limit for individual credit control area does not exceed the total limit .
Regards
Mahesh,B

P45 Platinum Owers. Can you go higher than 450MHz FSB with v1.5 or v1.6 BIOS?

I like to know who can overclock FSB to higher than 450MHz if you are with v1.5 or v1.6 BIOS.
I could do over 500MHz FSB with v1.4. Unfortunaetly, it has vCore bug, so I couldn't adjust core voltage.
according to my personal experience, there was overclocking wall around 425MHz with v1.5 and v1.6.
I, actually, was expecting v1.6. But that problem was still there.
I guess MSI blocked overclocking feature on purpose due to reduce damage of there board.
That's why they have perfomance BIOS on there beta BIOS site.
I like to know anyone have same problem as me or all this thing happened to me only.

Quote from: Kingnemesis on 13-March-09, 00:24:29
Well I have this Problem too, I can't get the System Stable above FSB400 with the Q9550 on Bios 1.5 or 1.6.
With the E8400 it was possible to get the FSB to 450 by Jumper OC but this doesn't help with the Q9550.
Code: [Select]
MSI has a solution about the problem, will post here once i have it too.
Do they have a new Beta Bios to get higher FSB ?
In fact some people on the German MSI Forum asked MSI for help but didn't get an heplfull answer.
Quote
Do they have a new Beta Bios to get higher FSB ?
Yes, can reach 500FSB {maybe more}
Will have it tomorrow probably and will upload it.

NTLM Authentication : why is it not possible to create more than one NTLM realm ?

Hello,
I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
Can you explain exactly what is the blocking point ?
Thanks in advance
Regards

Well, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship. From that point it is all based on how NT/Active Directory domains work. As long as there is a trust between the domains, you can can auth users from as many domains as you like.
There is an agent in the works. The ADAgent will be released with 7.5. The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA. At this point, current versions still require trust relationships between all of the domains touched.
Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
Before you configure even a single domain controller machine using the
adacfg dc create
command, ensure that the AD Agent machine is first joined to a domain (for example, domain
J
) that has a trust relationship with each and every domain (for example, domain
D[i]
) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
Depending on your Active Directory domain structure, the following scenarios are possible:
1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
a. A two-way external trust relationship can be established between the two domains, D[i] and J
b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J

Is it possible to go higher than 200FSB on K7N2Delta-ILSR?

Similar Messages

Maybe you are looking for