Is it possible to have 2 hostnames for the same ip in 9iASr2 installation??

Hi,
I am going to install 9iAS (9.0.2.0.1) on solaris 5.8, the hostname in nodename and hosts files all point to a name which I don't like to use, is it possible to add another entry in these files for the 9iAS?
The reason behind this is that the 9iAS installation Guide said I can't change hostname after install, but I like to have a meaningful name for the 9iAS when access OEM and HTTP home pages like:
http://goodName:7777
Do you know any other workaround?
Thanks

It is not possible to create two tables with same name in same schema.
A user can own one schema with his own name and another with the schema name SYS.
For this you have to grant sysdba privilage to the user and then have to connect using sys password or with the password specified in password file.
But this still you have to access to the table in sys schema using sys.table_name.
Hope Answered tthe Question.

Similar Messages

  • Events cannot have multiple exceptions for the same date

    I just starting getting this message and could not sync to one of my Google calendars. I'm posting this for others who might get the same problem.
    I didn't find the answer on these forums but did find it on this thread on Google:
    http://www.google.com/support/forum/p/Calendar/thread?tid=241155f758d9e2a4&hl=en
    Here's the important excerpt:
    "I had a client, who just had this same issue, nothing to do with Google cals.
    It was apparently, in my best guess, a corruption of the subscribed cal.
    *I did a get info on the cal, copied the URL, deleted the cal, then re-subscribed to it by pasting in the URL, and now it's working fine*."

    I've been having the same problem with my iCal calendars and the "Events cannot have multiple exceptions for the same date" error. Once it gets going, it uses up a lot of the CPU and resources. After reinstalling iCal, all my calendars were missing and I could not even resubscribe to them.
    I took my MacBook Pro to the Apple Store, and they were able to solve the problem by moving some of the iCal files from their existing folders out to the desktop, and reopening the program. That got it working, however, now I'm having the same problem again. So back to square one. Anyone else having this issue and know the cause?
    My setup is my MacBook Pro uses Entourage, use that calendar in my iCal. And I subscribe to two calendars my wife publishes on her Macbook. We're both using Snow Leopard.

  • HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

    Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

    Okay, the Wi-Fi doesn't work.  Turn it on.
    Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
    When responding, post in your native language as your English makes very little sense.

  • HT204053 my wife and i have seperate itunes accounts is there a way we can link our accounts to share songs so we dont have to pay for the same song twice?

    When the first ipad came out i set it up and created an itunes account, since then she got an iphone and an ipad and everything was good. I had an android but wanted to try out the iphone. When i set it up ut jumpled all of our contacts, apps, and everythin. it was a mess.
         Since, i purchased and ipad 2 and an iphone and to keep our stuff from combing i used a different computer and created an new apple ID for myself so our info wouldnt combine, I was wondering if i did the right thing or if i should have went about it a different way. I was going to see if there was a way when she purchased a song i could get it. I dont want to pay for the same song twice and only want to share songs. If i cant do this can i copy her library and paste it into my itunes??
    Any help wouldl be greatly apprecieated we both have icloud set up but i cant figure out the best solution.

    Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
    A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
    Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
    Also, I'm not a lawyer so don't take this as legal advice.

  • Can we have multiple transports for the same object.

    Hi guys,
    Can we have multiple transports for same object in dev system. Can anyone tell me how can this be done.
    Thanks

    Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
    Only after releasing the tr you can create a new tr on the same object.
    Message was edited by:
            Abhishek Jolly

  • Can we have multiple policies for the same gateway?

    Hi all,
    Is there a way in which we can have multiple policies for the default gateway?
    When I try adding a new gateway (which is not mentioned in the installer.properties file) and have policies, there is a 404 error.
    When I add another service to the same gateway, I get an error - that the service could not be added to default policy.
    Help me please...
    My need is as follows
    Want to have multiple policies, so that each of the web-service can be attached to same. The relation needs to be one-to-many. One policy can have multiple web-services.
    Thanks in advance...

    Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
    Only after releasing the tr you can create a new tr on the same object.
    Message was edited by:
            Abhishek Jolly

  • Is it possible to have two files with the same name on my Zen To

    Hia,
    Is it possible to have two mp3 files with the same name?; I.e if I'm ripping a Bach CD, there are several tracks that have the name preludium, and I hate to do the rename.
    Also, will I be able to sync my Zen so that It will only recieve new files that have been added since I last connected my Zen to my computer?
    regards,
    Fredrik

    I believe same filename is OK because the Zen Player does not really care about filename. As far as I know, the Zen database of the tracks in the player is based on the track information such as Title, Artist, Album and Genre. This means you cannot have two tracks of the same Title, Artist, Album and Genre in the Zen Player.

  • I have charged twice for the same app. where to compaint for a refund

    I have charged for the same application twice in itunes store with INR 435 extra in this way i have to pay INR 870 inspite of INR435 its disguesting shame on apple security and services

    Did you click on 'buy' twice ? You can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Can it be possible to use SUM twice for the same internal table

    Hi Guru,
    my requirement is follewing.
    I need to use a SUM for the same internal twice. 
    itab.
    first : like SUM  will sum up all the value
    and second like
    if  wa_tab-field = ' S'
    sum.
    ...some logic
    else  if wa_tab-field = h
    some logic
    endif.
    can i use  SUM in above way.
    Many thanks,
    Anuj.

    Hi,
    yes it could be use multiple time.
    Here example.
    sort GT_COLLECTHI by atnam ATWRT.
      loop at GT_COLLECTHI into gs_collecth.
        at end of ATWRT.
          sum.
          append gs_collecth to gt_collecth.
          clear:gs_collecth.
          sum.
        endat.
        at end of ATNAM.
          sum.
          append gs_collecth to gt_collecth.
          clear:gs_collecth.
          sum.
        endat.
      endloop.
    Thank you
    Jan

  • Is it possible to have 2 trans with the same tcode but different langs

    Dear forum members,
    I would like to know if it is possible to have in the TSTCT table u2013 two entries with the same TCODE value but different SPRAS value (the language field)
    Thanks for your help,
    Roy

    Hi Roy,
    It is possible. Just go to TSTCT table and check for the entries. On the selection screen give some Tcode (say OKEU) and execute. You can see different languages in which it is maintained.
    Regards,
    Swapna.

  • Is it possible to have 2 tables with the same name in an Orable database?

    Hello,
    I'm a complete Oracle newbie so please excuse my question if it's stupid.
    I was trying to create 2 tables with the same name using different tablespaces but it does not seem to work. Like this (second time just change the name of the tablespace):
    CREATE TABLE test_tbl (
      id INTEGER,
      status VARCHAR2(10),
      last_modified DATE DEFAULT SYSDATE
    TABLESPACE tblspc1Is it in general in Oracle possible to acquire this goal?
    Thanks a lot!
    P.S. I have already created the needed tablespaces
    CREATE TABLESPACE tblspc1 DATAFILE 'tblspc1.dbf' SIZE 10MEdited by: 808239 on 02-Mar-2011 02:18

    It is not possible to create two tables with same name in same schema.
    A user can own one schema with his own name and another with the schema name SYS.
    For this you have to grant sysdba privilage to the user and then have to connect using sys password or with the password specified in password file.
    But this still you have to access to the table in sys schema using sys.table_name.
    Hope Answered tthe Question.

  • Can we have two textures for the same project ?

    Hello all
    I use Captivate4. In my project, the background transparency for Playbar controls is 100%. So the texture would be seen as the background for the PlayBar. I have a requirement of hiding PlayBack Controls in few slides. Then I would like to change my texture to some other image. in brief, I would like to show one texture when the PlayBar is visible & another texture when the PlayBar is invisible.
    Is that possible?
    Thanks & regards,
    Kartik.

    OK.  This would be a little easier to do in Captivate 5 which has Master Slides and Playbar Overlay. But since you have Captivate 4 you will need to make do with adding graphics to the background of the actual slide, and just turning off the Playbar.
    From the graphics you added to your last post, it looks like you already know what you want the background to look like. You want a different background for Slide A and Slide B.  One way to do this is to add the graphic to each slide, then right-click and select Merge with Background.  But you can also just put the image on the lowest layer on the timeline of each slide and the effect would be similar.
    Regarding the Playbar...Since you are on Captivate 4, you do not have the option to set Playbar to Overlay.  I've just looked in Captivate 4 but the option is missing.  Here is what the Skin Editor looks like in Captivate 4 and 5.  Notice the Playbar Overlay setting is missing in Cp4.  There may be another way to do this but I don't know.
    This playbar overlay option would have allowed you to set the position of the playbar as sitting over the bottom 30 pixels or so of the stage area.  Since you can't do this, you may need to be satisfied with seeing the area occupied by the playbar go blank when it is hidden.
    To hide your playbar on Slide B, you will need to add an Advanced Action on Slide Enter that turns off the playbar by assigning the variable cpCmndShowPlaybar to 0.  Here is what that looks like in the Slide Properties dialog for your Slide B.

  • If I have two accounts for the same server, how do I save both Passwords?

    Is it possible to have the FireFox password save feature remember the passwords for two different accounts on the same server? For instance, I log into both my own account and my wife's account at Chase Bank for our credit cards, mine is a business card and hers is a personal card (of which I also have a card). I would like FF to remember both accounts and when I arrive at the server, FF to ask me which one I want to use.

    Make sure that you not run Firefox in permanent Private Browsing mode.
    * https://support.mozilla.com/kb/Private+Browsing
    * You enter Private Browsing mode if you select: Firefox > Preferences > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Firefox > Preferences > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Deselect: [ ] "Permanent Private Browsing mode"

  • How I have multiple KPIs for the same measure?

    Hi there,
    I am finishing up a PowerPivot data model which gathers information from a service desk system, and different customers have different SLA targets.
    I know I can specify a KPI for each measure that I create. However is there a way to specify multiple KPIs the same measure, or any other way/workaround that can meet the requirement outlined above?
    Thanks in advance for the help.
    Regards,
    P.

    Hi pmdci,
    According to your description, you want to specify different target for different customer when creating KPI based on same measure. Right?
    In PowerPivot, when we create a KPI, we can only specify calculated field or absolute value as target. We can't put any expression or function to specify a dynamic value as target value. Based on my knowledge, this requirement can be achieved in Reporting
    Services. We just  need to create a Variable and use Switch() function in expression to set specific values for different users. In this scenario, it seems can't be achieved in PowerPivot currently. I suggest you post this thread on PowerPivot forum:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlkjpowerpivotforexcel
    You may get some more effective advice there.
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Is it possible to have many users share the same account folder in HD Users?

    Hi!
    New guy here.
    I'm trying to set up somekind of Schedule for me to be able to use my mac only in the morning and only in the evening.
    Parental control seems to be able to allow me to do that if i set up two different accounts and assign time limits and schedules for each one. But the problem is that i need to run some programs on both accounts and keeping the same settings throughout both accounts. Is like if i wanted to have one single account but split in two different users.
    Any help on this? Thanks in advance!

    You have two accounts and you can enable fast user switching to quickly switch between active accounts.
    Any program installed in the Applications folder is global, so either user can open the same program into memory (I think, haven't been confirmed, don't see why not) as it just copies it into memory.
    However the users setting for each program is placed in the users account folder. Say for instance the programs preferences.
    You can't run two instances of the program at the same time, nor will they continue running when you switch out of a user account, it just keeps it in memory.
    The Users/Shared folder is just that, it's global file holding account to share when switching between user accounts, however if the file is already open on one user, it's not going to open for the other.
    If you want to pernamently drop files into antother user account, you use the Public > Dropbox and it's one way like a mailbox, stick it in and only the other account can access it.
    Hope this assists.
    Would help to know why, perhaps there is a better solution.

Maybe you are looking for