Is it possible to have 2500 series management interface out of band of APs?

I currently have 2500 series WLCs. Our wireless network is completely separate from our internal network, keeping the WLC from talking to any internal servers. The company would like to start using AD(LDAP authentication) for end users while still keeping the APs on a completely separate network. Since the 2500 series does not support a "service port", Is there any way to move the management port out-of-band with no access to APs and just use the other ports for AP management?

I haven't had my morning coffee ... But let me give this a shot..
I am going to say no. The managment interface is needed for APs to join. If you isloate this interface no APs can join. Even if AP managers are used, the AP requries to touch the managment interface when booting up.
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."
"Im like bacon, I make your wireless better"

Similar Messages

Is it possible to have spare 'VM Manager'?

Is it possible to have spare 'VM Manager'?
I want to enable two or more managers to connect the same server pool and same virtual host.
If it is possible,when a manager breaks,we can use spare manager,

Hi,
no it is not possible to have multiple managers for one VM Server.
Since the agent need to know to whom to talk, and you have only one agent on the VM Server this is per design not possible.
However if you need more reliability for the VM Manager, there is a good whitepaper, how to integrate the VM Manager with Oracle Clusterware (Grid Infrastructure) and use the VM Manager in a failover cluster style management:
Using Oracle Clusterware to Protect Oracle VM Manager (PDF)
http://www.oracle.com/us/026995.pdf?ssSourceSiteId=otnen
Sebastian

I was wondering if it's possible to have a welcome package sent out to me?.. (More info inside)

Hi there,
We recently acquired the CC package for our team. I noticed, I did not fill in my address at the time of registration (done now) and so did not receive the welcome package that my colleagues got. I was wondering if it's possible to have one sent out for me too?
Kind Regards,
Chris

http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
-has a link to manage your membership which may help

UCS B-Series Management Interface

Can the management of the B-Series UCS be on pass to the uplink/server ports of the Fabric Interconnect and not on the Management Interface of the FI? Just like in the C-Series there is a choice in the CIMC where the management passes to the LAN ports (LOM)

Yes from the FI you have a connection from the mgmt0 port - this is for the FI management and blade like KVM etc (i.e. the OOB management).
Then on the FI you configure the uplink prots which are used to carry the network traffic from the blades.
On the C series if you configure the CIMC port to be in shared-LOM mode then yes all the management traffic and the data path will be via the same LOM ports. If you choose the dediacted port then you need to use the CIMC port on the C series for management and LOM for the data.
./Abhinav

Is it possible to have clock in and clock out in weekly view

Hi,
We have Daily View and Weekly View in Record Working Time iview in ESS.We can set the Clock in and Clock out times in Daily view if we check the With Clock Times checkbox in Data Entry Profile.But we want to have same Clock in and Clock out in Weekly view without any developement.
If it not possible thru config how much will be the Development Effort
Thanks
Bala Duvvuri

Hi Bala
You can have clock in and clock out in a weekly view.
you have to change the data entry profile settings.
In general settings tab in data entry profile click the with clock times button and maintain the Period type to 02 in time settings tab.
And you can view the weekly entry in clock in and clock out.
Ravee
+91.99206.33669

Is it possible to have a hover effect easing out on multiple images when hovering on others?

Im trying to use four small images to create a large image by using a hover effect. However when i hover over an image for instance 3 of 4, after hovering over 1 and 2, number 1's ease-out effects snaps back to the background image, rather than continuing to ease-out. Which i do not want. Is it possible to have numerous ease-out effects working at the same time? Using CSS.

Could you show us a bit more of what you've done so far?
I'm not sure I understand the desired result.
Can you put your files online somwhere?
Thanks

Is it possible to have Clock in and clock out times in weekly view

Hi,
We have Daily View and Weekly View in Record Working Time iview in ESS.We can set the Clock in and Clock out times in Daily view if we check the With Clock Times checkbox in Data Entry Profile.But we want to have same Clock in and Clock out in Weekly view without any developement.
If it not possible thru config how much will be the Development Effort
Thanks
Bala Duvvuri

Siddharth,
can you please elaborate this
Thanks
Bala Duvvuri

When is it possible to have the same User Interface for all screensizes?

Hi all, i am final year student doing some research about User Interface Fragmentation on Mobile devices. As we already know, there are a huge variety of mobile screen sizes, and usually to provide users the best experience interfaces, we often have to customize the UI of one application in one phone to another. So i wondered when it is OK to have the same UI for all screen sizes?
Thanks.

It's usually OK if you don't use CustomItem, avoid extra-long Strings in titles etc. You might also need to scale any Canvas / GameCanvas graphics and Images using a scaling factor computed from the detected screen size.
I have 3 applications for free download from GetJar.com (search "Colorz") which have only the one version for all MIDP 2.0 devices, and there have been no complaints in a combined total of over 11,000 downloads ;-)
In any case, UI diversity is the least of the headaches any j2me developer faces, there are many features of j2me that are unimplemented or incorrectly implemented on various devices. Even the CLDC reference implementation has unaddressed bugs.
luck, db

Is it possible to have English as the interface language, but use (and develope for) any other language/locale?

Before installing Firefox, I need to clarify the following:
The use of locales: I am a developer and my preferable language, for the interface, is English (though, it is not my mother tongue). But, I would like to be able to use any other language (including, the use of any dictionary) and develop for any language or locale. So, does the English version let me do the above mentioned?
Or, eg, do I need to install the Hebrew locale, if I want to use the Hebrew dictionary?
Or, is it possible to install different locales on the same computer (and for the same user, in Win XP)?

You can install any dictionary is every locale, so that shouldn't be a problem if you use the English locale.
If you want to check out the user interface or how the browser acts with an RTL locale like Hebrew then you need to install the language pack and switch to that locale.
You can install additional language packs in any Firefox version.
* http://kb.mozillazine.org/Language_packs
* Locale Switcher: https://addons.mozilla.org/firefox/addon/locale-switcher/
* http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest/win32/xpi/

WLC to use Management Interface & Few more getting started Questions

Hello,
I'm yet to implement the Wireless LAN in one of our client's corporate office. There 40 x 1130AG LWAPP AP's and 4404 WLC with ACS 4.x for the Authentication of the Wireless Clients who is trying to access the LAN.
For the WLC to connect to the Dual Core Switch, i need to use only one Management Interface with Distribution System port 1 being the Primary and mapping the DS Port 2 as the Backup port for the Management Interface. Is this Right? or do i have configure Dynamic Interfaces as well. Is management interface for accessing / management and configuration only? Management Interface will communicate with ACS for AAA and AP's who would like to associate with the WLC, is this Right?
Note: WLC, AP's, Wireless Clients & AP's are in the same IP Subnet.
Few other question of WLAN's so it helps me during implementation -
â¢ Can I use the 802.1x Authentication application found in the Windows XP for the Wireless Interface; instead of Cisco Client Application. For this; I have to configure the WLC / Wireless Client to use EAP algorithm; is this Right?
â¢ With the help of RRM, the channel interference between multiple AP's (3 - 4 AP's) in the same area is controlled by the WLC by changing the Channels used by the AP which is not same on all the AP's. Is this right?
â¢ How many Client Users will connect per Channels. 802.11 a / g will provide 11 Channels, is this Right?.
â¢ I'm trying to set in the WLC to limit the Client connections per AP to 25, can this be achieved?
Please, can anyone help me in calrifying the above points.
Regards,
Keshava Raju

Many Thanks Mr. Dennis for your help & Clarification.
With ref to your reply point no# 1. I have actually planned to connect one Gig port of the controller to each of the Dual Cisco Core Switch setup. Can i use all 4 Controller Interfaces configured as LAG and Port 1 & 2 connecting to Core Switch 01 and Port 3 & 4 connecting to Core Switch 02?
I have Final two more questions, Request you to help me calrifying this?
â¢ I'm willing to configure Multicast communication between the WLC & AP's. For this configuration is it necessary to Connect the WLC in a different VLAN than the VLAN of the AP's. Is it necessary that I have to set the controller to LWAPP Layer 3 mode to support the Multicast communication?
â¢ Though I do not have implementation experience of the WLAN. My understanding of the Interface settings on the WLC - is I will have to configure one Management Interface for in-band management. Do I have to configure AP-Manager Interface (to support Multicast communication) and to make the WLC to communicate with ACS for Client Authentication. All of the Wireless Devices including the ACS are in one VLAN / IP Subnet, is only one Management Interface is enough for communicating with AP's (with Multicast) and communicating with ACS for forwarding the Authentication messages between the ACS & Wireless Clients?

Cisco UCS Managment interface

Hi Dear
Which is the function of the management interface of a Cisco UCS server? Only monitoring ?
Best Regards

Hi,
The management interface present in the Cisco UCS C-Series is a out-of-band interface that provides to you access to Cisco Integrated Management Controller (CIMC) where you can perform all management/monitoring tasks related the hardware set.
You can find more information about the CIMC in this link:
http://www.cisco.com/c/en/us/support/servers-unified-computing/ucs-c-series-integrated-management-controller/tsd-products-support-series-home.html
Regards,
Richard

Out of Band Management (D-Link modem)

Hi Guys,
I have an issue with the Out of Band Management.
It works with most of our routers, but it doesn't work with routers with new IOS.
The IOS version of our new routers is 15.0(1)M2.
The configuration of all the routers' Aux port is below:
line aux 0
exec-timeout 3 0
modem InOut
transport input all
stopbits 1
flowcontrol hardware
The configuration of the d-link modem is below:
ats0=1
ats2=127
ats37=9
ate1
atq1
at&c1
at&d2
at&s1
at&k0
at&r0
I tried different configuration combinations without any luck.
The diagnostic reason I'm getting from the D-link modem is:
DIAG <2A4D3263 0=10>      ß   Diagnostic Command Specification revision number
DIAG <2A4D3263 1=00>     ß   Call Setup Result code = No previous call
DIAG <2A4D3263 60=50>   ß   Termination Cause = AnyKeyAbort Call Control
Disconnect Type
Disconnect Reason Code
Description
3
0x007
The AT dial command was aborted . The AT dial command was aborted by the any key abort command. For example, the host modem originates a call. During connection establishment, prior to STEADY STATE, pressing any key will cause the AT dial command to be aborted.
Disconnect Type
Disconnect Type (Hex)
Description
3
0x6...
Condition occurred during call setup.
Has any of you guys dealt with this issue before?
I would appreciate it if you can share it.
Thanks,
Regards,

tray cable with this scheme of pin connector
RJ45 DB9
1 7
2 4
3 3
4 5
5 5
6 2
7 1
8 8
init string at&F1S0=1

Would it be possible to have a better PRESETS management system in LR6/CC2015 ?

Congrats on LR6. I see a very nice speed improvement when working with my 36MP D800 files, especially when zooming in/out 100%. I still experience some hickups (controls sometime feel like they hang for half a second), but overall I enjoy the direction the speed upgrade is going. I look forward to the next updates.
Meanwhile, a question:
Would it be possible to have a better PRESETS management system in LR6/CC2015 ?
Unless I am not looking correctly (and if so, please enlight me!), I can't seem to figure out how I can manage my Presets. At the moment, I have a bunch of folders containing presets. I would like to have the ability to move Preset Folders within Folders. I mean, how hard can this be to implement??
Users who have the VSCO presets will know what I mean. You have tons of folders containing presets. How about putting them all within one VSCO main folder?
Also, how about having the ability to search your presets? A simple search field at the top of the presets would do the trick.
I have seen virtually no change to the way we manage presets in LR since version 1 or 2. I'm sure there is a better way to manage th
Again, thank you for your excellent work.
I look forward to see where development of LR leads us.
Cheers,

Many people have requested nested preset folders. Please add your vote and opinion to this feature request in the official Adobe feedback forum: Lightroom: Respect Hierarchical Folders of Presets. (This forum is a user-to-user forum in which Adobe rarely participates.)

Is it possible to have user defined field in pick and pack manager

HI,
I would like to know whether it is possible to have user defined field in pick and pack manager row level.
Manage user defined field there is only provision for <b>pick list</b> and not for <b>Pick and pack</b>.
Regards
Krishna

The Pick and Pack Manger doesn't relate to any specific table (nothing saved to the database), so it does not make any sense having a userdefiend field on it. I would guess that you could add a column and bind it to a userdatasource (not a SAP database field), but if this make any sense depends on what you are trying to achive...

Is it possible to have a slide show as one state in a MSO?

I have a series of states on a page that are triggered by buttons. I have managed to place one image sequence into one of the states but not a slide show. Anyone know if this is possible?
Thanks.

The buttons simply launch one state or another in a MSO (different text boxes with a photo for ex.). I would like one of those states to have text and a slideshow above, but it does not seem to allow me to add the slide show to that state. I can select the state and then select something else (a random box for ex.) and its happy to add it to the state. Select a slide show and it does not allow the add to state function.

Is it possible to have 2500 series management interface out of band of APs?

Similar Messages

Maybe you are looking for