Is it possible to have a 1 tap icon to turn Blue Tooth off & on?
Blue tooth is killing my battery on my iPhone4 and I would like to be able to turn it on & off without having to go thru several menu options.
Oh wow, I'm so glad you told me that I could turn on the Bluetooth before driving. I never thought of that because my IQ is 25!!
I'm really confused about what kind of person you are and why you would post these negative comments saying that I "lose ... doubly". My post was agreeing with the original poster and supporting his desire for easier Bluetooth activitation. He's making a reasonable request and MANY people have asked for it in the past.
For the record, I plan to turn on my Bluetooth before I drive because I am concerned about safety. Apple could make it easier to turn it on - it's as simple as that! Even if it's only for general convenience, not safetly, it's utterly unnecessary to have to go through 4 button presses to activate Bluetooth when it could be done in one. My prior phone, which was inferior to my iPhone in every way, allowed me to turn on Bluetooth in one keypress and I miss that. Why does that make you declare me a loser?
Now, I'll be really interested to see if you reply to this post in an angry, blaming and petty way. Why be hostile? Life's too short. If you don't agree with somone on a small issue, move on to the next post. I'm sure you are a smart and capable person (see I'm giving you the benefit of the doubt!) and I think maybe you would be a happier person if you could find ways you agree with someone instead of treating them like they are brain dead. Let's be nice to each other!
Similar Messages
-
The main screen on my Iphone 4 seems to be locked. I have to double tap icons to open. In the keypad screen I have to double tap numbers to dial. I have tried to reset using both the back button and the power button. Has anyone experienced this or know how to fix it? Any help is appreciated!
You are a genius!!!! Thanks so very much! It seems my voice over was one...I have no idea how that happened! Thanks again! Have a great day!
-
i just recently got a new ipod back from apple because my other one had a hardware issue.
i wasnt able to manually shut it off by holding the power down button, so i updated ipod and now that part works good. it still doesnt respond well to the touch screen part, i have to use two fingers to get it to slide through the icons and i have to double tap icon in order to enter, and there is an annoying grey boarder around everything now, and to scroll up and down i have to tilt the ipod and wait for it to scroll down by itsself.
is this normal? anyway to get it back to the way my old one was, no grey boarders and it responded perfectly to my one finger touch.
heres a picture of the boarderof course as soon as i post this question i find the answer on this website! it was in voiceover mode, i got rid of it by going into settings general accessibility voiceover. thanks to this website! so much better now haha
-
My iTunes Store on iPhone comes up with an error [newNullResponse] always when I click the music tab. The movies and tv shows tab works fine. I have tried everything from restarting my phone to turning my account off and on.
Try a different cable and a different charger. If neither fixes it you probably need a new battery. Apple will replace it for $80 in the US; I don't know what the charge is in other locations.
-
Have a problem with my screen turning blue after exiting Safari or Firefox, what is going on?
Have been having an intermittent problem with my MacBook Pro running 10.6.8.
When either running Safari or Firefox the desktop will turn blue and i have to hard reboot in order to use my Mac again.
Please help.Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter "WindowServer" (without the quotes) in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under System Diagnostic Reports for crash reports related to the same process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful. -
Is it possible to have songs remaining on a playlist after deleting them off the general ipod??
My leaving cert is coming up and i have created a french playlist on my ipod touch, but i dont wont the eighty-somehting tracks on my general ipod, coming on after bands like metallica and guns n roses, but i want to keep them on the playlist! so can i just have them on the playlist and no where else on the ipod???!!
No, They Have To Have A Location To Be Able To Add To A Playlist, Deleting Them Will Delete The Location.
-
I have an Apple Trackpad that shows that it is connected with Bluetooth but it is not responding. I've tried restarting the computer, disconnecting and reconnecting and also turning the trackpad on and off but it simply does not respond. Does anyone have any idea on what is going on here?
There are reports of similar behavour but generally it is due to battery connections. Is the indicator light working steadily or does it blink or even not function. Here is the Apple document dealing with some of the problems.
http://manuals.info.apple.com/MANUALS/1000/MA1544/en_US/Magic_Trackpad_UG.pdf
Is your machine within the guarantee period or under Apple care. If so, return it to any apple retailer for examination and possible replacement. -
I have upgraded from a 3gs and first backed up by 3gs through iCloud. I then logged on to iCloud on my new device and it synced my contacts. I entered my email addresses and then tried to download some of my App purchases. The screen then went white and I cannot now shut down the phone although I am hearing new emails coming through. I think I should have downloaded iTunes first but didn't which means iTunes does not recognise the phone and I cannot therefore restored to factory settings to start again. Help please.
Has the phone been unlocked officially? Has the phone been jailbroken in the past? If yes, these could be reasons for the behavior of the phone.
iPhone: About unlocking
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues -
My phone has the wifi greyed out, and no wifi. It has wifi address, whne i turn it off for some 30 minutes, it came back up with wifi but it dont last too long, somebody help!
if it's still greyed out after fully restoring it, the device needs hardware repair.
-
I was opening up an app, and the ipod changed to a black screen, with a line of white on the bottom. It is backlit. It is also 'stuck' like this. It will not respond to pressing any buttons - it won't even turn off!!! What really *****, is that it's only 2mths old!! (8GB touch)
HHEEELLLPPPP!!!!!!!!!Thankyou ckuan - but the laptop that this particular iPod is attached to - is currently in the fix it shop after being stood on!!
After much frustration, the battery finally died - I left it to recharge for 20hrs, and it now works fine - thanks for your quick responses! -
is it possible to have my text messages sent to my email as well? or is there a way to view them other than on the phone?
Sure. Go to the conversation that contains the message(s) you wish to forward. Tap the Edit button in the upper right corner. Select the message(s) you wish to forward using the radio buttons. Tap "Forward" at the bottom right of the screen.
-
Is it possible to have a right-click application?
Is it possible to have a right-click application for the iPad?
And this is for an iPad? Somewhere there's some serious miscommunication if anyone thinks that you can left or right click on an iPad. There's no mouse support, it's driven by taps with your finger. If you are developing an app, you need to talk to someone on the developer forums about differentiating between a tap and a tap-and-hold to approximate left/right click behavior.
-
Possible to Have ToC Default to Show Only Top Level (collapse sublevels)?
Howdy!
I'll bet I'm not the only one wishing for this. Let's say you're using Captivate 4's Table of Contents feature with a longish movie of Cp slides, which is chunked into bite-size sections content-wise. In the ToC, though, you can't mimic that same organization scheme; at least, the learner would first need to collapse all the ToC folders you've created so they see only the top-level listing.
This can be a critical issue: keeping the at-first-glance list in the ToC brief enough to be inviting to learners, yet allowing learners to drive which details are currently visible.
A movie's topical hierarchy could be along these lines, for example ...
Section 1 - National Brands
What are National Brands?
Why Are They Important to Our Business?
Working with Nat. Brands
Practice Your Knowledge
Section 2 - International Brands
What are International Brands?
Why Are They Important to Our Business?
Working with Intl. Brands
Practice Your Knowledge
You'd like to organize the ToC to show only the section titles (1st level) and to suppress the 2nd-level detail (slide titles) until the learner chooses to expand the folder to see those details.
I've tried things like grouping the slides into sections in the Storyboard view and organizing the slides into sections strictly within the ToC -- both to no avail.
Has anyone solved for this need yet?
I'm all ears, and you'd be doing learners of the world a huge favor.
Thanks!Hi, Jim.
Thanks for being 'on the case' and looking into this so quickly. Your
findings are encouraging, although my user base is generally working with
IE 6 and FP8 or 9.
Since the only thing I may influence is getting IT to help push out FP10,
I'm hoping it's more of a player- than a browser-version issue.
I'll test things out by Monday and let you know the results. Wish me luck!
Dave
From: Jim Leichliter <[email protected]>
To: Dave Tressler <[email protected]>
Date: 03/26/2010 06:02 PM
Subject: Possible to Have ToC Default to Show Only Top Level (collapse
sublevels)?
Dave,
I just tested this on my local web server and it worked fine. I created a
blank project with 8 slides. Created my TOC with grouping... 2 slides in
each group. I turned on self paced learning. I tried with and without the
widget and it picked up where I left off in either case. See
https://docs.google.com/leaf?id=0B86WuEq6SVwRNWIwMjhjODctMjE2Yy00MWE2LWI5YzEtMGQxYzNjOWQ0Z mI2&hl=en.
I published using FP10 and IE8 to view. Notice any difference between
your project and this one?
Thanks,
Jim Leichliter -
Is it possible to have an attachment within a pdf doc print at the same time the main doc prints?
Okay, so this may be kind of a weird question. We have some users who are wanting to add a page to an already existing xml document and correct me if I'm wrong, but I've read that it's not possible to add/delete pages from a pdf that's in xml format. Since that is not possible, I have added the page to the xml document as an attachment. Now what I am wanting to know is if it is possible to have the attachment print out at the same time as the main document. We are using the latest version of Adobe Reader and I have access to Adobe Acrobat Standard 9 & 10 and then I have access to Adobe Acrobat Pro 7. I've been unable to find anyting via google or by searching this forum so hopefully I'll draw out some kind of smart cookies and we'll get this figured out. I appreciate any and all input!
Thanks,I know of no way to do this with Reader or XML.
-
Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app
I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming. So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on. But the ipad is a different story. I have the music and artist but not one playlist I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this.
Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z. Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac. Which I do talk highly of all the time. But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
I have managed to get the Imac to fix this but for some reason the IOS devices do not. Any ideas?
Thanks Al
Maybe you are looking for
-
WebDynpro for Abap Test failed (System Admin/Support/WD)
Hello, I'm using EP 7.0 and I'm trying to test travel&expenses (Ehp3) WD for Abap from System Admin/Support Desk: Integration of SAP Applications/WebDynpro and we get the following error: Exception in SAP Application Integrator occured: Unable to par
-
Hi, In the help for Designer 9i I found a note explaining the different parameters which can be set in a LOB storage clause. Does anybody know where these parameters can be set for a given table implementation? Regards Bernd
-
Plotting Data on a fixed time axis from left to right
I am plotting data on a Historical Trend graph from the DSC palette. I receive the data from a plc throughout the course of a production shift. I would like to have the start time of the shift (07:00) on the far left of the x-axis and the end time of
-
Force user to register when attempting to reset password
Hello, I've searched but didn't see anything with this exact question. What I'd like to do (if possible) is create a custom error page on the password reset portal, so that if a user enters their username to reset their password and hasn't registere
-
E71x calendar displays 2 different meeting times
I have an e71x with an unusual problem. Meeting often have two different times in the editing mode. Here is an example: I select a meeting for November 18 (this is a real example from the past) and it shows 1pm to 5pm. The meeting time has changed,