Is it possible to have a Boot Camp AND a Leopard partition on my startup disk?

In Disk Utility it says I can only make TWO partitions…
I want to run Mavericks, but have a small partition for Leopard and Boot Camp.
Possible?

I can add a 3rd partition. Would you post a screen shot of it telling you you can only have 2 partitions so people can see what you are seeing? Make sure you cover any personal information using Preview. Post the screen shot in a Reply using the camera icon. Copy and paste doesn't work.
Screen shots

Similar Messages

Hello to you all, my Macbook Air won's boot up and upon diagnosis, i realized my startup disk is full to 99% even with 2GB Hard Disk space. It wont also enable me boot into safe mode too. Please help as all my work documents and project files are on HD

Hello to you all,
My Macbook Air won's boot up and upon diagnosis, i realized my startup disk is full to 99% even with 2GB Hard Disk space. It wont also enable me boot into safe mode too.
when i power up, i get this prolong gray screen which wont change screen but remain so. Infact i am handicapped.
Please help as all my work documents and project files are on this machine and i can't afford to loose them all...
Please, should you have any solution please send me the details to [email protected]
Thanks you a millionh times.
Al.

The MBA seems to cause several problems to several users on boot ups
On start up my MBA would not boot up the apple logo came on but only a blank screen appeared no fan i followed several start up recommendations but to no avail so I took the MBA to the nearest Apple repair centre again the same symptoms on start up ......very sorry sir you need a new mother board that will be $500 not feeling confidant in the product declined and was going to put it on ebay for spares.
On return home I pressed the start up button and it started normally everything was working fine i decided to reinstall all the software what has caused the problem I have no idea but it is after several attempted reboots it finally started on its own so don't give up if you have this problem it may come to life

Is it possible to have a Lion OS and snow Leopard using the bootcamp?

I bought a macbook pro 13" 2011. I have other programs that will run only in Snow Leopard OS just like Logic Pro 8. Is it possible to install snow leopard aside from my current Lion OS? How to install? Is it possible to use both OS in my mac? I need your help. Thanks!

OOPS! I just noticed you actually have Lion, and want to go back to Snow Leopard. That may or may not work. The first test would be to see if you can boot your new MacBook 13" from a Snow Leopard installation DVD, or from another Mac in Firewire Target mode, or a bootable external Snow Leopard disk (SuperDuper or Carbon Copy Cloner created).
If that works, then Yes, but before trying anything make sure you have full backups (SuperDuper or Carbon Copy Cloner, or even TimeMachine). 2 copies would be even better.
Bootcamp is not needed. Bootcamp is an aid to installing and running the Windows OS
You can install Lion on an exteernal disk, and boot from that by holding down the Option key during boot.
You can repartition your internal disk so you have 2 partitions. You restore your Snow Leopard backup to one partition, and install Lion on the other. You can choose to boot into either partition by holding own the Option key during boot. You could also use System Preferences -> Startup Disk to switch between Snow Leopard and Lion.
You can use virtual machine software (VMware Fusion, Parallels, VirtualBox) on Snow Leopard (does not work the other way), then install Lion in a virtual machine (your MacBook should have a minimum of 4GB if you are going to try this). This would allow you to run Snow Leopard and Lion at the same time.
You could buy one of those kits that replaces your DVD drive with a Solid State Disk (SSD), and instlal Lion on the SSD, and again boot holding the Option key or use Startup Disk system pref to switch between the OS versions.
Message was edited by: BobHarris

I have a MBP and have used boot camp to make two partitions. I screwed up and reformatted the PC side. I'm trying to use boot camp to get to the pc side now and it says it can't. I have to download some helps for windows. I did that, but it still won'

Then... I tried to reformat using the start up disk and reloaded everything. When I tried to use boot camp I still get the same message. When I check disk utility, I still show two partitions...same as before... I just can't use the pc side. What's up, please?

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

Com port failed with boot camp and snow leopard - Please help!

Hi. I have been a very happy leopard and macbook user for the last couple of years. This week I upgraded to a macbook pro with OS X 10.6 snow leopard. I set up boot camp with Windows XP SP3as I have a couple of windows only applications that I need to use and they both need serial port. I had a Keyspan USA 19-QW serial adaptor that worked fine with Leopard and my old macbook. I installed the driver that came with the Keyspan adaptor. Now when I plug the adaptor into the USB slot it finds new hardware and says it is ready to use and the adaptor is listed in my ports as being on COM3 in device manager in windows but when I try to run the programs I get the message 'the selected port could not be opened. Either the port is in use by another application, or the port doesn't exist'. I'd be very grateful for any advice you can give me to solve this problem. Do I need to buy a new adaptor? Is this a settings or driver issue? I'm a user and not a techie person so please can you leave me easy step by step help. Many thanks. Karen

And was wodering if snow Leopard is pré installed
Yes.
And also which disc that came with thé machine has boot camp on it
None. Windows is a separate purchase.
i havé read that to install windows7 you need to pût thé snow leopard disc in to complete thé installation
That refers to the Boot Camp drivers for Windows, not Windows itself.
(53272)

Boot Camp 3.0, unable to select Default startup disk in snow leopard

I've installed Snow Leopard On my black Macbook, actually upgraded on 10.5, and then installed Bootcamp 3.0 on my Boot Camp partition which is on Vista Ultimate, everything is fine but this little annoying detail! I can't select default Startup Disk when I'm in Snow Leopard. I can select default Operating system from Vista but no chance to select it from SL! Just wonder did this happen to anyone else?! and any suggestion to solve it?

Rather than use a 3rd party product to enable writing to ntfs drive you can enable native ntfs read/write support. The method is described in Mac World OS X Hints.
Use this link to the article
http://www.macosxhints.com/article.php?story=20090913140023382
You get read/write privilege and all the partitions show up in the "Startup Disk" window.

Is it possible to have dual boot Tiger & Snow Leopard?

I currently use Tiger. I have one important (and expensive) piece of unsupported software that I don't need too frequently. Does anyone know if it's possible to have a 'Boot Camp' type setup with the option to boot in either OS? I don't want to be 2 versions out of date but I can't do without the unsupported software altogether.

My macbook only had an 80gb hd so after 2 years, I installed a 500 specifically for the coming of SL. With that in mind, I partitioned it in 2 beforehand.
Although I've never done it ( theres a lot about OSX I don't know about being that I jumped from 12 year old macs to OSX recently) but as the other person said, you can go ahead and make a partition.
Its just that when you put in the SL install disk, you'll need to go to utilities first and open disk utilities to create another partition. I don't know the exact instructions on that since I've just made partitions on a fresh drive.
Although I'm not sure if its necessary or not since you already have a system, what I did anyway was to boot from the SL install disk. You do that by inserting it and restarting while holding down the 'C' key. It'll take a while to boot from the disk.
As far as what do do with the install, it couldn't be simpler. Obviously you've already gone ahead and cloned your current system.
Once you have your second partition set up simply click install on the SL splash screen. After it does its thing it'll ask whether you want to migrate anything over from another volume or computer, etc.
It'll have some checkboxes for your 'old' home folder, applications and settings/network.
They all have a drop down menus for further refinement of what you want to migrate...except applications, I think...its all or nothing.
After you're all done, restart and it should boot from SL first. *Verify and repair permissions*
One thing I noticed was that my mac hd's didn't appear on the desktop. So I went and looked in the finder prefs and it has a checkbox to make them appear...which I did, and they showed up.
Thats about it.

Setup Boot Camp and installed XP SP3 now no OS 10.5.8 please help

I have setup boot camp and installed XP SP3 onto the macbook pro. When i restarted the computer the only operating system is XP. I have held down the options key while restarting only the WINDOWS option is displayed. How can i get the Mac OS back as i have some pretty important document in that section.
I have a time capsule but i can not restore from the time capsule as it takes a continues to search for the disk image.
Can i reboot the computer and start again, then carry out a restore from there?
How do i reboot/format the computer so i can start again?
I need to get this sorted ASAP as i have to get this information sent away ASAP.
Cheers

Have you tried booting from the disk that came with your computer? I'd try that first, and see if you can see your OS X partition in Disk Utility and possibly repair it.
Good luck!

Boot Camp Assistant: Can't Partition Drive

I've been trying to partition my hard drive using the Boot Camp Assistant so I can install Windows XP. However, whenever I try to partition the drive, I get an error message saying that my hard drive needs to be a single Mac OS Extended (Journaled) volume. I opened up Disk Utility to see what was wrong, and it said that my only hard drive, Macintosh HD, was formatted as a Mac OS Extended (Journaled) volume. I tried bumping the partition size down from 15 gigs to 12 gigs; the progress bar was a little under 25% full when I got the error message again. I'm planning on arranging to get support at an Apple Store, but I wanted to see if anybody on here knew what to do first. Any ideas?

JadeH wrote:
okay so i did what you said and i selected restart under superduper clone so i could test to make sure the clone worked...but now i can't get it to restart under my Macintosh HD. the clone works fine but it is on my external hard drive. i need y internal hard drive to be my start up disk so i can use boot camp assistant. i went to system preferences->startup disk but it only shows my clone on my external hard drive. any suggestions?
When you tested the clone, did you change the default boot to the clone? You should have simply booted by holding down the Option key.
I don't know what happened to your HD or original OS, but if you reboot and hold down the option key, your original OS should show up in the selection menu.
If not, boot into the Leopard DVD (press "C" key during boot) and after the language screen, in the menu, top left under Utilities select disk utility and run it, repairing HD and permissions. Then see if you can reboot into the original OS. You may have to hold down Option key again until you boot it and change the default back to the original OS.

Boot Camp and Windows XP right-click

I have a Mac Book Pro where I have installed Boot Camp and Windows XP with great success. I have one problem; I can not right-click. When I press ctrl+mousepad button it still works as an left-click. Very frustrating. Can anyone please help? And no, I do not have an external mouse
Best regards
EtronX
Mac Book Pro Mac OS X (10.4.8)

Sorry folks Did a search here in the forum and found the answer. To quick

Urgent help needed related to boot camp and Win7 32 bit

I have installed boot camp and Win7 32 bit on my iMac (2010) but I can't start from my mac os even by holding the option key. Windows doesn't recognize my wireless mouse either, but for now going back to the mac os is the priority. Can anyone help please?

Welcome to Apple Support Communities
Hold the Option (Alt) key after hearing the startup chime and until you see all bootable partitions in the screen. Do you see the OS X partition? If so, select it to start up in OS X. If you want to start up in OS X by default, open System Preferences > Startup Disk, and select your OS X partition.
Respecting to your wireless mouse, you have to install the Windows support software. To download it, you can use Windows or OS X, from this site > http://support.apple.com/kb/DL1630 If you are in Windows, decompress the file and run the installer. If you are in OS X, follow the steps of the website to burn it to a USB drive

I have parallels 7 and windows 7, how do I use Boot Camp and windows

I have Parallels version 7 installed on my MacPro5,1 mid 2010 (3.2ghz quad core) OSX 10.6.8
My question, can I run Windows from the Parallels 7 using Boot Camp app, or do I have to install it with Boot Camp on a different partition ?
I have never used Boot Camp before so this is puzzling ?
I want to run a few of my PC games better than in Paralels 7 .

I thought the Mac were finicky with which hard drive they use.
I remember getting a 3.5 floppy for my IIe then many years later getting a 80meg HD then up to a IIgs ( loved that thing). Formatting and rebuilding HardDrive swapping out the smaller HD's..
Then a Mac IIci, last was wife's QuickSilver before this MacPro5,1..
It seemed so simple back then before serial- ATA, then. Started learning Windows vista (2008) on my mom's Asus laptop now Windows 7 ?
Getting more Mac like all the time... A friend who tried the Sata 3 and blew something on his pc laptop fixed it..
Thank God formatting drives is easy, only back up the data you need before doing anything with a drive..
Thanks again for the information and Merry CHristma and a Happy New Year !!

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?

Ouch, well there is a problem.
This is the stack of partitions on your old drive
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
This is the same stack on your new drive imaged from the old one.
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
Emtpy Space (100GB say)
This is what you want
EFI (hidden)
Lion (100GB say)
Bootcamp (100GB say)
Lion Recovery Partiton (hidden)
EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
And you only have four partitions.
You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
This is what your going to need to do.
You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware.

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

I have os x 10.6.6 and I need to remove a partition from boot camp and I no longer have a boot camp assistant...HELP!!!

HELP! You've heard of builders who never get their house finished? Well, I have a husband who could do this and a friend of my husband's who can also but they REFUSE to help me or at least keep forgetting (conveniently). I'm at wits end and am contemplating taking it to the shop. UGH!! I no longer have a boot camp assistant (I tried to do this before last year and gave up and bought a pc as my work programs wouldn't work with Mac.) What can I do?
Thank you!!!!!

Niels approach to get the BootCamp Assistant back is recommended because usually the correct way to remove your Windows partition is to use the BootCamp Assistant again which should give you the option to remove the made Windows partition and revert back to one OSX volume.
After that's done a reboot of your Mac might be advisable.
Only if that's not working (whatever the reason) :
1) boot your Mac from your OSX install DVD
2) choose your language and then 'ignore' (cancel) the installation
3) from the Top Menu (Utilities) start Disk Utility (DU)
4) in DU click on your harddisk (not any partition) in the left pane (the first item listed)
5) in the right pane use the 'Partition'-Tab
6) click to highlight on the ex-Windows partition you want to delete
7) click on the small '-' Button at the bottom
That should delete your former Windows partition
After that's done successfully
8) Drag the partition separator line until it encompasses the entire drive and then select apply.
9) Quit Disk Utility
10) reboot your Mac from your harddisk.
Since you are 'fumbling' with your OSX partition you should consider having/making a backup of it before trying the a.m. procedure. Just in case.
Stefan

Is it possible to have a Boot Camp AND a Leopard partition on my startup disk?

Similar Messages

Maybe you are looking for