Is it possible to have a phone line connected to a Mac Mini (OS X10.8.2) so you can use your computer with Parallels (Windows xp) to dial into a modem to download data being collected and stored at the remote location?

Hi, do you mean a real Dial-up Modem as in the old days?
As I recall, the Apple USB Modem won't work in 64 bit OSes, but there are others that will, I think this is one of them...
http://www.zoomtel.com/products/dial_up_external_usb.html
Or is the Modem on the other end Cable/DSL/FiberOptic?

Similar Messages

I've lost half of my icons such as calculator, fonts, chess, automator,ichat,ical it it saying that you can use this version with the OSX. You have version 4.04. And, there is no way to update them. What do you do?

I've lost half of my icons such as calculator, fonts, chess, automator,ichat,ical it it saying that you can use this version with the OSX. You have version 4.04. And, there is no way to update them. What do you do?

If I'm understanding you correctly, those apps have stopped working and you are getting a message saying that they won't work with this version of Mac OS X when you try to open them. Is that right? If so, have you moved those apps out of their original locations? That is a bad idea, as it prevents them from being properly updated. If this is what has happened, what version of the system were you running before they stopped working, and what version are you running now, after installing the update that has made them stop working?

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

You must connect to Microsoft Exchange with your current profile before you can synchronize your folders with your outlook data file (.ost).... OWA works but outlook 2013 does not, exchange server 2013 on Server standard 2012

I have read a lot of articles and tried a lot of things, but I cannot get outlook to connect to my exchange server. This is a test environment, I have tried making my own certificate and signing it through my own CA to no avail. I have completely disabled
windows firewall and stopped the service. I can ping between the two just fine by name or IP. I've tried not using cached mode, creating new profiles in outlook etc. I tried setting my CertPrincipalName to my FQDN in exchange powershell.
I am not an expert with exchange at all, but I feel like this should work with little to no configuration, instead I've wasted days on this. Half of the articles I've read don't seem to have solutions, and the other half have solutions that are not working
for me.
I can access OWA and send emails on a client computer through OWA with no problems.
I am running a test domain on the same network as my current exchange 2003/sbs 2003 active environment, I don't know why this would be an issue, but if it is I cannot figure out why. The only thing I can see holding me back right now is not having a signed
certificate from digicert etc, and an official internet domain set up, but I don't think either of those things matter in my situation.
Any help is greatly appreciated and I'll gladly provide any other information requested to solve this issue, thank you.

I have a similar setup and also have the same error. Did you find a solution for this?
In the managed availability - monitoring log I see the following errors:
EMSMDB.Connect() step of ComplianceOutlookLogonToArchiveRpcCtpProbe/Mailbox Database 0326619395 has failed against BESRVCOTEXCH001 proxying to BESRVCOTEXCH001 for [email protected].
Latency: 00:01:58.0150000
ActivityContext:
Outline: [15] RpcProxy connectivity verification; [117999][FAILED!] EMSMDB.Connect();
Likely root cause: HighLatency
Details:
Error: Error 0x71a (The remote procedure call was cancelled) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall RPC EEInfo is not enabled or there is no error on this thread.
Log: RpcProxy connectivity verification
Task produced output:
- TaskStarted = 8/5/2014 7:47:11 AM
- TaskFinished = 8/5/2014 7:47:11 AM
- ErrorDetails =
- Latency = 00:00:00.0153816
- RpcProxyUrl = https://besrvcotexch001.hq.corp.cotrain.lan/rpc/[email protected]:6001
- ResponseStatusCode = OK
- RequestedRpcProxyAuthenticationTypes = ntlm
- RespondingHttpServer = BESRVCOTEXCH001
- RespondingRpcProxyServer = BESRVCOTEXCH001
- WebHeaderCollection = Persistent-Auth: true
X-DiagInfo: BESRVCOTEXCH001
X-BEServer: BESRVCOTEXCH001
Content-Length: 20
Content-Type: application/rpc
Date: Tue, 05 Aug 2014 05:47:11 GMT
Server: Microsoft-IIS/8.0
X-Powered-By: ASP.NET
RpcProxy connectivity verification completed successfully.
Mailbox logon verification
EMSMDB.Connect()
Task produced output:
- TaskStarted = 8/5/2014 7:47:11 AM
- TaskFinished = 8/5/2014 7:49:09 AM
- Exc
and
EMSMDB.Connect() step of OutlookRpcCtpProbe/Mailbox Database 0326619395 has failed against BESRVCOTEXCH001 proxying to BESRVCOTEXCH001 for [email protected].
Latency: 00:01:58.0250000
ActivityContext:
Outline: [13] RpcProxy connectivity verification; [118011][FAILED!] EMSMDB.Connect();
Likely root cause: HighLatency
Details:
Error: Error 0x71a (The remote procedure call was cancelled) from ClientAsyncCallState.CheckCompletion: RpcAsyncCompleteCall RPC EEInfo is not enabled or there is no error on this thread.
Log: RpcProxy connectivity verification
Task produced output:
- TaskStarted = 8/5/2014 7:23:20 AM
- TaskFinished = 8/5/2014 7:23:20 AM
- ErrorDetails =
- Latency = 00:00:00.0132417
- RpcProxyUrl = https://besrvcotexch001.hq.corp.cotrain.lan/rpc/[email protected]:6001
- ResponseStatusCode = OK
- RequestedRpcProxyAuthenticationTypes = ntlm
- RespondingHttpServer = BESRVCOTEXCH001
- RespondingRpcProxyServer = BESRVCOTEXCH001
- WebHeaderCollection = Persistent-Auth: true
X-DiagInfo: BESRVCOTEXCH001
X-BEServer: BESRVCOTEXCH001
Content-Length: 20
Content-Type: application/rpc
Date: Tue, 05 Aug 2014 05:23:20 GMT
Server: Microsoft-IIS/8.0
X-Powered-By: ASP.NET
RpcProxy connectivity verification completed successfully.
Mailbox logon verification
EMSMDB.Connect()
Task produced output:
- TaskStarted = 8/5/2014 7:23:20 AM
- TaskFinished = 8/5/2014 7:25:18 AM
- Exc

Are there apps that you can use in Europe with out phone connection

Going to France, and other parts of Europe, and would like to use the GPS on the phone without using phone service. Is there an app that you can preload the maps, and just use the GPS on the phone to find location?

There are 100s of apps in the App Store that will load local maps onto your device. Some are free, some aren't.

How do I combine my content from 3 external hd's and my 1 Mac Mini to my new Time Capsule (which is connected to my Mac Mini) and not have to use my external hd's again? My Mac Mini wont hold all the content on the external hd's.

My 3 external hd's are 500GB (total 1.5TB) and my Mac Mini is 500GB (Time Capsule is connected to this). I want to be able to have all the content from all these sources stored on my Time Capsule as if I only had 1 external drive. Is this possible? It is my understanding that when Time Machine backs up my Mac Mini I have to have my external drives connected since my Mac Mini does not have enough space on it to hold all the content on the exgternal hd's. I can only connect 1 external hard drive at a time and I want to get rid of them and consolidate.
And having to go back in time to search for files on 1 external hard drive and then back in time for the other external hard drive is not the most efficient thing to do. I would like it all in one place.
Thank you for your help!!

Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Application Support/SyncServices
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

What is an app where you can use a photo and cut a person out of it and put it on another picture?

What is an app where you can use a photo and cut a person out of it and put it on another picture?

I don't believe you can do that on an iPhone. But you can on your computer using apps such as Photoshop.

HT1212 So my phone is messed up and you can't do anything with the screen...in order for me to sink it to back up i have to enter the passcode because it had a lock on it...and i can't due to it being messed up...is there any way around this...

So my phone is messed up and you can't do anything with the screen...in order for me to sink it to back up i have to enter the passcode because it had a lock on it...and i can't due to it being messed up...is there any way around this...

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Can I have two phone lines on my iPhone 4G (one for biz and one for personal calls)?

can I have two phone lines on my iPhone 4G (one for biz and one for personal calls)?

FWIW, from my experience I was not able to get this to work. When I conected a second bluetooth audio device the first device disconnected.

My Xtreamer media player won't read srt sub files downloaded from my iMac and stored in a 1Tb seagate external disk. However, the Xtreamer Elvira media player will read all the .avi files I have loaded in the external disk. Any ideas?

My Xtreamer media player won't read srt sub files downloaded from my iMac and stored in a 1Tb seagate external disk. However, the Xtreamer Elvira media player will read all the .avi files I have loaded in the external disk. Any ideas?

I am experiencing the same issue with a new external DVD burner, a Sony DRX-840U. When I load a CD into this external drive it appears in iTunes but when you go to import or play the CD iTunes indicates playing or importing for each individual track for just a moment. The end result is that nothing is ever imported or played. I am experiencing this on two different systems. One a notebook running Win2K and the other a desktop running XPpro. If I use the internal DVD drives on either of these systems everything work just fine. Yet I am able to use this new external DVD drive with every other application. For example Window Media Player has no problem playing or importing the same CD that iTunes fails on. The last person indicated that if one set the DVD drive in question to be the drive of choice under preferences>advanced>burning that all was ok. I my case this Sony external drive is the drive listed as the drive of choice for burning yet the issue still exists.
As this appears to be an issue that others are also experiencing help from Apple Tech Support would be greatly appreciated.

I have an old iPhone 4 that finally stopped working. I have an unlimited data plan and want to keep it. When I called customer service, I was told like in the past that if you purchase the new phone at full price, you can keep your old plan. However, a

I have an old iPhone 4 that finally stopped working. I have an unlimited data plan and want to keep it. When I called customer service, I was told like in the past that if you purchase the new phone at full price, you can keep your old plan. However, after some time on the phone i was told by the csr and supervisor that their system is not allowing them to complete the transaction without changing to a limited data plan. I was told to try going to a store and buy the phone. Same thing happened. Has Verizon changed something and not told their employees?

Seems like people having this problem are those coming from a phone that doesn't have a nano SIM card...so when Verizon issues them one they end up changing their plan. No clue why this keeps happening but stay on top of them. As long as you initiated the request for your plan to be reinstated within the 14 day time frame they should put it back. Interested in seeing how this plays out. There is still one phone in my house that hasn't been upgraded (an iPhone 4). I'm hoping when we do upgrade it at full retail they won't mess with her unlimited data plan

As I heard, If i get an unlocked iphone 5s, I can use it with my Wind Mobile which i have to have a $40 monthly plan for it. So, I want to buy an Iphone 5s that I can use it here with Wind Mobile and in turkey with my turkish line tht supoprts Iphone.

As I heard, If i get an unlocked iphone 5s, I can use it with my Wind Mobile which i have to have a $40 monthly plan for it. So, I want to buy an Iphone 5s that I can use it here with Wind Mobile and in turkey with my turkish line that supports Iphone. So, is it possible that I can purchase an Iphone 5s that will be usable within Canada and Turkey? Im asking because, In Turkey, you need to register the Imei of the phone on your Passport to use it. Also, if i buy an unlocked Iphone 5s, will I be down to use it anywhere with any line?

I dont know if you know the procedure in Canada and Turkey. Wind mobile wasnt supporting Iphones until they decided to let people use Iphone 5s with their $40 plan.And as i know, Turkey is the only country that asks you to register the imei on your passport to use it. So, most of people did not know it. so procedures are changing country by country. Are you sure that If I buy an Iphone 5s from a canadian apple store, use it with my wind mobile line and the turkish line in Turkey?

My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young

Can you have two phone lines?

I was just wondering if you can have two phone lines going to the same house one for home and one for business?
If yes how would they do it? Just connect another line from the telephone graph to the house?
Many Thanks Luke

You can have as many phone lines to your house as you like: each pays rental.
I work from home so have two.
One is for phone calls only, t'other has my broadband and BTV on it.
The phone calls only has unlimited 24/7 calls; the second comes with after 1900-0700 and free weekend calls.
Shame BT are phasing out BT BB Talk; under that regime every customer has two phone number/lines on one copper/fibre connection
AQ.
"Welcome to Royston Vasey - You'll never leave."

Custom button ALV to download data to excel and word.

Hai Experts,
   I have a requirement in which i need to add a button on the alv tool bar
    which has the functionality of downloading the data in the alv to
    word/excel/notepad..
i got the prcedure to download the data but my problemis how to capture the data in the alv into an internal table.
if i can capture the column headings and the data into an internal table, my problrm of downloading the data solves.
so please help how to capture the data along with the headings displayed in the
ALV into an internal table.
its urgent,,,,
Madhu

check this link for a guide how to add and remove buttons from the ALV in web dynpro:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40794172-b95a-2910-fb98-b86d8a0918b4">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40794172-b95a-2910-fb98-b86d8a0918b4</a>
part of this document:
Get reference to ALV component and configuration model
To obtain a reference to the ALV component and its configuration model you can use the following code.
The configuration model can be used to set all sorts of properties of the ALV
DATA: lr_salv_wd_table TYPE REF TO iwci_salv_wd_table,
r_table TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
* get reference to ALV component interface lr_salv_wd_table = wd_this->wd_cpifc_alvmain( ).
* get ConfigurationModel from ALV Component
wd_this->r_table = lr_salv_wd_table->get_model( ).
Hide / add function buttons in your ALV
You can hide all function buttons of the ALV with one of these methods.
* Set toolbar visibility to false. data: lr_function_settings type ref to if_salv_wd_function_settings. lr_function_settings ?= wd_this->r_table. lr_function_settings->set_visible( CL_WD_UIELEMENT=>E_VISIBLE-NONE ). * set default ALV Functions off data: lr_standard_functions type ref to if_salv_wd_std_functions. lr_standard_functions ?= wd_this->r_table. lr_standard_functions->set_sort_headerclick_allowed( ABAP_false ). lr_standard_functions->set_filter_filterline_allowed( ABAP_false ). lr_standard_functions->set_filter_complex_allowed( ABAP_false ). lr_standard_functions->set_sort_complex_allowed( ABAP_false ).
You can set individual functions with these methods:
CALL METHOD cl_salv_wd_config_table=>if_salv_wd_standard_functions~set_<x>_allowed
EXPORTING
Value = ABAP_true.
Where <x> is to be replaced with the property of your choice.

Is it possible to have a phone line connected to a Mac Mini (OS X10.8.2) so you can use your computer with Parallels (Windows xp) to dial into a modem to download data being collected and stored at the remote location?

Similar Messages

Maybe you are looking for