Is it possible to have both the CS6 and CC suites on the same computer

I have just purchased a new computer. I will be needing to download the Adobe CC suite. I fear that having to adjust to so many new things at once will be too much of a a chalenge since I have many projects in the works at this time. I would really prefer to finish out current jobs in CS6 and start new jobs in CC. Will that be possible using my creative /cloud membership?

Thank you for your reply but unfortunately it is not correct.
It is definitely correct.
CS6 versions are available to Cloud members and can be installed alongside CC versions.
WHen I attempted to download and install the software to my new computer I found that only the CC versions were available for download.
See http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html for the steps required to download CS6.

Similar Messages

  • I want to buy a 13 inch MacBook Pro but I want to have both Arabic letters and English letters on the keyboard, is that possible?

    I want to buy a 13 inch MacBook Pro but I want to have both Arabic letters and English letters on the keyboard, is that possible?

    draelgendi wrote:
    I want to buy a 13 inch MacBook Pro but I want to have both Arabic letters and English letters on the keyboard, is that possible?
    Yes, if there are Arabic letters then there have to be English letters as well, because otherwise you could not type any email or web addresses.
    As to where you can buy such a machine, you have to contact stores in the country where you live directly yourself and ask them.  Nobody in these forums represents Apple or any store.  Apple stores do not ship outside the country where they are located.

  • Is it possible to have a Lion OS and snow Leopard using the bootcamp?

    I bought a macbook pro 13" 2011. I have other programs that will run only in Snow Leopard OS just like Logic Pro 8. Is it possible to install snow leopard aside from my current Lion OS? How to install? Is it possible to use both OS in my mac? I need your help. Thanks!

    OOPS!  I just noticed you actually have Lion, and want to go back to Snow Leopard.  That may or may not work.  The first test would be to see if you can boot your new MacBook 13" from a Snow Leopard installation DVD, or from another Mac in Firewire Target mode, or a bootable external Snow Leopard disk (SuperDuper or Carbon Copy Cloner created).
    If that works, then Yes, but before trying anything make sure you have full backups (SuperDuper or Carbon Copy Cloner, or even TimeMachine).  2 copies would be even better.
    Bootcamp is not needed.  Bootcamp is an aid to installing and running the Windows OS
    You can install Lion on an exteernal disk, and boot from that by holding down the Option key during boot.
    You can repartition your internal disk so you have 2 partitions.  You restore your Snow Leopard backup to one partition, and install Lion on the other.  You can choose to boot into either partition by holding own the Option key during boot.  You could also use System Preferences -> Startup Disk to switch between Snow Leopard and Lion.
    You can use virtual machine software (VMware Fusion, Parallels, VirtualBox) on Snow Leopard (does not work the other way), then install Lion in a virtual machine (your MacBook should have a minimum of 4GB if you are going to try this).  This would allow you to run Snow Leopard and Lion at the same time.
    You could buy one of those kits that replaces your DVD drive with a Solid State Disk (SSD), and instlal Lion on the SSD, and again boot holding the Option key or use Startup Disk system pref to switch between the OS versions.
    Message was edited by: BobHarris

  • Possible to have both an index and TOC open by default?

    I'm using RH7 (I have RH 8 but don't use it since it buggers up formatting from previous versions) and I publish wbhelp.
    Is it possible to set BOTH the Index and TOC to display as open when the project is posted. When I generate a primary layout, I can only slect one as default in the second screen (Wbhelp navigation).
    Thanks!

    We feel your pain. How about making the topic that links to the movie the default topic of your help file. That way they'd get to see it every time they open the help. Failing that, try a sledgehammer over their cranium
    Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
    Follow the RoboColum(n) on Twitter

  • Is it possible to have both Snow Leopard and Lion at same time on one machine without creating a mess?

    I currently use Snow Leopard because I like the way it preserves the operation of OS10 PPC programs.  I have both an expensive CAD program and Adobe Photoshop CS3 which are PPC programs.
    Can you launch your machine with Lion when you want to use that, and launch with Snow Leopard when you want that.  Its too bad Lion does not support PPC OS10.

    Absollutely. This is a very common practice whenever a new OS or OS update comes out. By far the best way to do what you want is to install Lion onto an external firewire 800 disk, then boot off it when you want to use Lion and boot off your iMac's internal disk when you want to use Snow Leopard. USB 2 will work, but firewire 800 will be faster.
    The second best option is to partition your iMac's boot drive, then use one partition for Snow Leopard and the other for Lion, but be sure to back up your boot drive to an external disk drive before you partition it.
    You can switch operating systems during a restart by holding down the option key.

  • Is it possible to have multiple page sizes and print types in the same pdf?

    Is it really possible to have a pdf which has multiple pages and each of them have pages which are of different page sizes (e.g. letter, A4, A3) and print types (e.g. Simplex, Duplex)???
    Thanks,
    Phoenix

    you can definately do different page sizes by using different master pages. You can set the paper type for each master page in the object>master page palette.

  • How to have both Classic Report and Interactive Report from the same page?

    Hello APEX developers,
    I want to copy a page consisting of master-detail form together with its data, as in data stored in the tables.
    I've generated a master-detail form(which by default having its detail report as a classic report). I want to copy this page and then migrate this classic report to Interactive Report. This way, I have both the classic master-detail form with report AND the master-detail Interactive Report.
    I've tried doing this but ended up getting a new master-detail Interactive Report page without its data.
    Any feedback is appreciated.
    Best regards,
    Daniel

    Hi everyone,
    Solved already. What a relief! Kindly ignore this post.
    Rgds,
    Daniel

  • Can I have both iMovie HD and iMovie 11 on the same computer?

    I need to have both verisions on my computer. Is this possible?
    iMovie HD and iMovie 09 or 11

    Yes. I have iMovie HD and iMovie 8.

  • Can I have both iMovie 11 and iMovie 6 on the same computer?

    I like the ease and layout of the previous iMovie. In my mind, it's quicker and more precise. But, at the same time, there are some good features of iMovie 11 I also like. So, I was going to download iMovie 6.0.3 and just use both of them, but then I started worrying that if I installed it, it might mess up iMovie 11, or the installation simply might not work. The pop-up window told me it is supposed to automatically upgrade anyway. I want both of them on the same computer, is that possible? Is it okay to just download and install it?

    The famous 'free' 6.03 was NO fully functional version of iMovie!
    It was just a special update for those, who didn't like then new iMovie08 - which wasn't more than just a demo, imho.With appearance of iM09, v6.03 was pulled by Apple…-
    You need a 'real' installer disk with an old version of iLIfe to install iMHD6.
    There's no legal way to download an obsolete version of iMovie.-
    iMHD6 and actual iM11 can co-exist on the same Mac.
    Afair, you need MacOS 10.6 to install it…
    Search this board … there are many people still using iMovie-a.

  • Is it possible to have both a persona and a theme installed and showing on the browser? I tried to install the persona "vivid sky" and the theme "yogurttree," but it seems I can only have one or the other. Thanks!

    Link for vivid sky persona:
    https://addons.mozilla.org/en-US/firefox/addon/vivid-sky/
    Link for yogurttree theme:
    https://addons.mozilla.org/en-US/firefox/addon/yogurttree/?src=search

    Not all personas would work well with a custom theme, so the devs have decided to switch back to the default theme if you install a persona.
    A theme can enable personsas with this line in their install.rdf file like the default theme does.
    *<em:skinnable>true</em:skinnable>

  • I just intalled the CS6 and when I type the validation number it says i need internet conection, even tho I am connected. What should I do?

    After I put the serial number to validate, it says i need an internet connection to do validate. But I am connect!
    I says i should look for costumer service, and i end it up here.
    What can I do ?
    Thanks

    Hi trevisan-trevisan,
    Please try : Sign in, activation, or connection errors | CS5.5 and later
    Thanks,
    Atul Saini

  • Possible to have both HD and SD on same dvd?

    Hi there.
    I was wondering if it was possible to have both a HD1080i60, and a DVNTSC on the same dvd?
    The DVD is a standard def dvd, but i would like to have a "Extras" section, which would include a couple of HD clips.
    Is this possible?
    Do i just need to make the HD seqeunces 16:9 ?
    Any help would be greatly appreciated

    rom content? what exactly does that mean,and how would i go about doin it?
    I just want to have a bonus section on my dvd, that includes HD versions of edits that are SD letterbox on the actual movie.. So the whole point is to have a the bonus section show that those edits look like in actual HD, not letterboxed...
    So is this possible?

  • HT1399 Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

    Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

    I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming.  So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on.  But the ipad is a different story.  I have the music and artist but not one playlist  I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this. 
    Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
    I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z.  Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac.  Which I do talk highly of all the time.  But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
    I have managed to get the Imac to fix this but for some reason the IOS devices do not.   Any ideas?
    Thanks Al

  • I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the "double click" defult to o

    I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the default to open an image with a double click in 4?

    You can associate files from the Bridge level and the Desktop level.
    In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
    If you want to open files from the Windows Desktop in CS4, these are the instructions:
    Do this from the Windows Desktop:
    If you want your image file to open in Photoshop and it doesn't, right click on it and choose
    Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file".

  • Is it possible to use both an ILB and an ELB (listening on the same port) in the same Azure cloud service?

    I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
    Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
    in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
    So, a typical Lync deployment looks like this:
           Internal users
                     |
                   443
                      |
              Internal LB
            192.168.0.20
            443         443
              |               |
       Lync FE 1     Lync FE 2
    192.168.0.21 192.168.0.22
              |               |
          4443        4443
              External LB
           Public IP Address
                     |
                  443
                     |
           External Users
    This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
    is the keyword here.
    After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
    adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
    Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
    For reference, my commands are:
    Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
    (This completes successfully)
    Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
    (This fails)
    The existing external endpoint is configured as such:
    Get-AzureVM LYNCFE1 | get-azureendpoint
    LBSetName : HttpsExtLB
    LocalPort : 4443
    Name : HTTPS-Ext
    Port : 443
    Protocol : tcp
    Vip :
    ProbePath :
    ProbePort : 4443
    ProbeProtocol : tcp
    ProbeIntervalInSeconds : 15
    ProbeTimeoutInSeconds : 31
    EnableDirectServerReturn : False
    Acl : {}
    InternalLoadBalancerName :
    IdleTimeoutInMinutes :
    LoadBalancerDistribution :
    The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
    shouldn't be any conflict here... however it looks like there is one instead.
    Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?

    Hello Massimo Pascucci,
    The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
    known as the Internal load balanced IP) per cloud service.
    There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
    You can leave your feedback by following the link below:
    https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
    Refer to this article for more information on Internal load balancer:
    http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
    Thanks,
    Syed Irfan Hussain

Maybe you are looking for