Is it possible to have delimited output using burst distributed mode

I am aware that it is not possible to have burst mode and delimited output using reports. I am using reports 9.0.4.0.21. Are there any work arounds ? Is it possible to use ascii, and then use the destype=printer, but the printer destination will be a file location or direcotory ? Any suggestions with this ?

Just to make it clear, if the question isnt. I am trying to hae burst mode distribution, but i am not able to use the feature in Oracle Reports, since delimited output is not supported. I would like to use the burst mode distribution because of its advantages, however since that is not supported the only other alternative in burst mode is using format=ascii. But that format, as much as i am aware, is only for printing, since the mode has to be character. Is it possible to have any workarounds where the mode=character, but the device which reports points to is actually another file location ? Has anybody got any interesting ideas ?

Similar Messages

  • Possible to have certain apps use certain GTK theme??

    Hey guys I'm wondering if I can have certain apps use either a specific GTK theme (different from system-wide one in use) or none at all, much like OpenOffice does for me right now (I use a dark theme but it retains a light grey, I'm assuming default theme with Gnome).
    Any help appreciated, TIA

    I wrote a little script which does "export GTK2_RC_FILES=/path/to/openoffice.gtkrc" before opening OpenOffice.  I use a GTK theme that make apps like Eclipse and OpenOffice look horrible.  So I use a different gtkrc for them.
    I'm pretty sure exporting GTK2_RC_FILES will work with any GTK2 app.

  • Is possible to have audio output during video recording with Canon 70D?

    Hi everybody,
    I am owner of a Canon 70D camera and I use this to record video (live) jazz small groups.
    I use for this audio input either external microphones (Rode or AKG) or my Zoom H4n digital handy recorder which has inside microphones.
    I want to ask you if there is a solution to hear at the same time the audio output from my Canon 70D via earphones which is suitable for studio recordings.
    I hope to have a clear answer about this....
    Regards
    Tasos Architektonidis

    You should check Magic lantern about this. I suppose the answer is no.
    My Swedish blog
    X100, 7D, 6D, 17-40/4L, 70-200/2,8L IS II, 17-55/2.8 IS, 24-105/4L, 85/1,8, 50/1,4, 24/1,4L II, Helios 58/2
    Darktable, RawTherapee, Photomatix, Luminance HDR, GIMP 2.9.1.

  • Is it possible to have one library used between two users?

    Hello, I am setting up a friend's computer to have a seperate user for him and for his wife. The computer has been in use for about a year with just one user. Adding the second one makes sense for everything they use the computer for--except iPhoto. They have roughly 11,000 images in the library and want to be able to access, edit, export, etc them from whichever user is logged on. They would like it to work so that when one user adds images to the library, the other user has access to them as well. I looked into the sharing photos option, but it seems to restrict you to read only access when viewing shared libraries. Any suggestions on the best option for them? They are using a dual G5 Tower running iPhoto 5.0.4
    Thanks, Alan
    Powerbook 1.25 GHZ    

    Hey,
    saw this in macworld:
    (I haven't tried this, but it does indicate that permissions include read and write)
    Family Album
    My son and I share an iMac at home. Is there a way for us to use the same iPhoto library?—Kiki Mulliner
    With the proper privileges, this can be done with aliases. It works this way:
    Choose the most up-to-date iPhoto Library folder (located at your user folder/Pictures) and move it to the Shared folder inside the Users folder at the root level of the hard drive. Click on the iPhoto Library folder, press Command-I to call up the iPhoto Library Info window, click on the Ownership & Permissions triangle, and then click on the Details triangle below. Select Read & Write from the Access pop-up menu directly beneath the Group pop-up menu, select Read & Write from the Others pop-up menu, and then close the Info window. Hold down the Command and option keys and drag the iPhoto Library folder back to the Pictures folder to create an alias.
    Switch to your son’s user account, change the name of his iPhoto Library to something like iPhoto Library Old (in case you want to use this library again), open the Shared folder within the Users folder, and Command-option-drag that folder’s iPhoto Library folder to your son’s Pictures folder to create an alias.

  • PCI-4451 Analog Output using FIFO allocation mode

    I'm using a PCI-4451 DSA device to generate a short length (<50 updates) repeating pulse train. I want to write directly to the 4451's onboard FIFO so that I only have to transfer data to the device once and let the 4451 continuously regenerate the pulse train on its own. Using the the AOCONFIG.vi I set the allocation mode to "6" (use FIFO Memory). But when I write to the buffer, and then call AOSTART.vi, I get no output. Sometimes my system simply crashes. In either case, I get no LabVIEW generated errors when I set the allocation mode to "use FIFO memory." According to my 4451 documentation, I do have an AO FIFO, so it should be working. What could be going wrong?

    Thanks for your response,
    I used the VI you linked to and the non-FIFO mode AO works fine. In FIFO mode, it does end up generating an output, but it only iterates through the buffer once, no matter what the input to "number of buffer iterations" is on AOSTART.vi. I want it to regenerate indefinitely, but wiring "0" to "number of buffer iterations" and allowing regeneration on AOWRITE.vi doesn't make it do that. Could this be caused by a driver problem?
    Also, I figured out that if I run a non-FIFO mode AO, stop the VI (I allow AOCLEAR.vi to execute), and then switch to a FIFO mode AO without first shutting down LabVIEW, my system locks up. It's not enough to just close the VI and reopen it to get FIFO mode to run again without locking up; I
    actually have to exit and restart LabVIEW. Running a FIFO mode AO first and then runnning a non-FIFO mode AO causes no problems. I'm using Win2k professional and LabVIEW 7.

  • Is it possible to have ??

    Hi,
    Is it possible to have 2 Publisher in 1:1 mode in a CCM cluster to avoid a single point of failure..in a cluster to support 20K+ users...If yes,then how to use the standby server or any option one can suggest towards redundancy...Though as per Cisco guideline this is not suggested but was thinking of a way for redundancy...
    Thanks in advance..
    With best regards,
    Mani

    there is no solution for 'clustering' the publisher as you request.
    the best things you can do to minimize outages in the case of 20k plus users are:
    1) use multiple clusters to provide call processing to your users; a gatekeeper should be used for, among other things, to ease the dial plan administration across the clusters.
    2) take all possible tasks off of the publisher. make it so your publisher only provides configuration and CDR functionality.
    (it doesn't need to provide MOH, CTI manager, streaming media, TFTP or other such functions as long as there are other systems available to provide these functions)
    other than admin/configuration and CDR, all other vital call processing functions can be put onto subscribers, other servers in the case of directory/XML features, etc.
    also, there can be two TFTP servers defined for use as well as an 'alternate TFTP'. (which is configured statically)

  • Is it possible to have 2 different output config XML files and index the data into 2 endeca apps using the same indexing component ProductCatalogSimpleIndexingAdmin

    Hi ,
    We have a catalog that defines 2 types of products (they have too many different properties), so wanted to keep them on two different MDEX engines and serve the applications requests. Here DB catalog and front end ATG application is same for both the MDEX instances.
    Is it possible to have 2 different output config XML files and index the data into 2 endeca apps using the same indexing component ProductCatalogSimpleIndexingAdmin?
    Thanks
    Dev

    Hi, also have had some problem some monthes ago - I created separete component ProductCatalogSimpleIndexingAdminSecond. After that one of my colleage gave me some advice:
    The creating separate component like ProductCatalogSimpleIndexingAdmin for the second IOC is possible way for resolving your situation. But I afraid that this way will be required creating mane duplicates for already existed components.
    In my opinion the better way is the following:
    starting from AssemblerApplicationConfiguration and ApplicationConfiguration component. It contains details for connecting between ATG and Endeca. Of course you should configure different components for different Endeca Apps.
    After that:
    Find all components that uses AssemblerApplicationConfiguration and ApplicationConfiguration. Customize these components for using one or another  *Configuration component depending on what index works. (many variants released it: the most simple global custom component with flag.)
    Then customize the existed ProductCatalogSimpleIndexingAdmin. Using one or another IOC  and setting the flag in global custom component when index started. You can add some methods into your custom ProductCatalogSimpleIndexingAdmin like:
    Execute baseline index for both IOC (one by one)
    Execute baseline for IOC 1
    Execute baseline for IOC 2.
    Note: you should be afraid about incremental (partial) index in this configuration. But resolving conflicts in incremental index should be done after full implementation these changes.
    Regards

  • Is it possible to display a date as (DD-MON-YYYY) in excel output using excel template in xml publisher

    Is it possible to display a date as (DD-MON-YYYY) in excel output using excel template in xml publisher where date should be displayed as date only not string.

    I've tried to use hierarchy node variables, but it seems like you can't specify a attribute of the hierarchy such as level.  So with the WBS hierarchy, if you create a hierarchy node variable, you specify the WBS value to select (If I understand this correctly).  I wish I could instead specify "give me all the WBS nodes that happen to have the value of the level attribute greater or equal to 3.  If I understand Juergens post, he is saying make security access so that only certain WBS levels can be returned in the query.  I suppose we can try that, but that would then preclude getting the level 1 and 2 in the future if the authorization is global.

  • In RoboHelp 11 Responsive HTML5, is it possible to have 2 different language outputs in one generated output file?

    In RoboHelp 11 Responsive HTML5, is it possible to have 2 different language outputs in one generated output file, similar to WebHelp where the use can select the language from a drop-down list? In Webhelp output you could create multiple Content categories. Is there something similar with the responsive output, or am I forced to have a completely separate set of output files for each language (for example, English, Japanese, Chinese, Korean, and Arabic)?

    As Rick, mentions, there's no default way.
    Having said that, there's nothing stopping you from doing it yourself. You can add a kind of language selector to the layout and set that for every html5 output. With some JavaScript, you can have the user switch between your outputs. It would look like content categories, but you'll have build it yourself.

  • I want to cut and paste iCal entries on iPad.  Have seen a number of questions raised but no definitive answer - is it possible or not?  (I use Bento but that doesn't sync with ICal now so can use that solution)

    I want to cut and paste iCal entries on iPad.  Have seen a number of questions raised but no definitive answer - is it possible or not? 
    (I use Bento but that doesn't sync with ICal now so can use that solution)
    Hope to hear helpful news soon....
    C

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • Is it possible to have two USB drives for the IPad?  I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive.  One of my cameras does not use an SD card.  How can I do this?

    Is it possible to have two USB drives for the IPad?  I want to bring RAW files from my camera through the IPad and out to an external hard drive.  One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line.  Realted to this, I bought the IPad camera accessory.  Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive?  Can I put Lightroom or the Nikon photo editing software on the IPad?  Right now I carry a PC laptop and external hard drives with me on wildernes trips.  Internet and WiFi are not available.  Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad).  I have Nikon NX software and lightroom on my PC.  I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips.  Is this possible and how would I do it?  I'd appreciate any guidance.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • HT1364 I used these instructions to move my i-tunes library to the external hard drive that two different home pc's access. My playlists do not show on both Is it possible to have one i-pod synch amid two different computers that use the same library?

    I have a sole i-pod and two pc's, used the instructions for "iTunes for Windows: Moving your iTunes Media folder" in the hope that I could synch my one i-pod between two different computers that are sharing the same library. Is it possible to have two seperate computers that only share an external hard drive (one wireless, one not) ? When I am looking at a shared library should it appear the same on both machines (ie: playlists/ purchased list etc)?

    If it is moved correctly, playlists will display on both computers and it should be possible.
    Close iTunes.
    Hold <SHIFT> and launch iTunes.
    When prompted to create a new or open an existing iTunes library point iTunes to the iTunesLibrary.itl file on the external drive.
    The entire library should now show up with all playlists and playcounts.
    Do this on both computers.
    Keep in mind that only one computer can access iTunes at a time, otherwise errors will occur when each computer attempts to write to or update the iTunesLibrary.itl file.
    Syncing may work seemlessly with both computers, but honestly syncing is designed to work with one and only one computer.

  • Is it possible to have your music and videos saved on different external drives and use the same iTunes library?

    Is it possible to have your music and videos saved on different external drives and use the same iTunes library?
    I am running out of space on my external hard drive and would like to split the movies and music between two external drives while using the same iTunes library is this possible.
    My library is stored on the external drive all of my music etc is stored.

    Yes.

  • Isit possible to have two Ni elvis writer in one Vi using the same device and using 2 different NI elvis?

    Hi is it possible to have two writer in one Vi with one elvis  and also use two different elvis on one Vi? I hope someone can or know the answer.

    If memory serves me correctly, an NI Elvis board connects to a PCI card in a PC if you want 2 Elvis boards then you will need 2 PCI cards. 
    Certified LabVIEW Architect
    Certified Professional Instructor

  • Is possible to have a time machine backup on an external hd connected to either a primary or secondary router and not have "back to my mac" using 10.7.3?

    Is possible to have a time machine backup on an external hd connected to either a primary or secondary router and not have "back to my mac" using 10.7.3?

    The bottom line is that Apple does not support Time Machine backups at the USB port of the AirPort Extreme. If they don't support their own router, they certainly don't support other routers from other manufacturers.
    Connect the drive directly to the Mac using either USB or FireWire.....or....use a Time Capsule.  Either of these setups will be supported.
    If you want to try the unsupported method(s), you can certainly do so. But, I would suggest that you have a secondary backup plan in place if this is important data that you will be backing up.

Maybe you are looking for