Is it possible to have mixed orientations in one folio?

Is it possible to have some articles that are are only portrait and some articles be only landscape in the same folio? I'm basically running into the issue of what to do with content that was a spread in the print edition of the magazine. I'm at a small publisher and don't have the time to create 2 orientations of every layout, so I'd like to be able to pick and choose article orientation within a folio. Make sense? Thanks!

Not possible.

Similar Messages

Would it be possible to have 2 shared resources, one local containing all common topics and pictures for several projects, and another one remote containing all topics and pictures for collaboration purposes

Hi,
I was wondering, now that I discovered the advantages of Resource Manger, if it would be possible to have 2 shared resources, one local with common topics and pictures for several projects, and another one, remote, containing the whole projects, i.e. topics and pictures, for collaboration purposes.
The local one I intend to use it for my purposes to have common items (topics & pictures) updated in all projects where they appear, and the remote one I intend to use it together with my remote colleagues that might want to do changes in the topics.
This would mean that the common topics and pictures would be present in both resources, the local one as well as the remote one.
Thank you.

Thank you for your fast answer Rick.
I was merely wondering if it would be possible w/o having to use other products outside RoboHelp.
We are already using svn for a lot of other purposes and we are using that for the RoboHelp projects as well, however I was wondering if it would not be possible to have RoboHelp take care of the RoboHelp projects, and with svn to take care of the other things in the company.
Eventually, if it would be possible, I would think to sync all the local projects with the remote projects, then sync the local project with the local shared resources, and at the end sync the rest of the projects with the local shared resources.

Is it possible to have 2 Mavericks on one machine

I'm on 2009 Mac Pro. 12 gig memory OSX 10.9.5 I have recently purchased an ssd drive for this machine. The new drive is much smaller 240gig than the original HD it is to replace.
Question 1....I am wondering if it is possible to have the original HD with Mavericks and the new ssd with Mavericks both on the machine at the same time?
It is only that the applications etc are so interwoven with the library etc and other stuff it is near impossible to install them and have them work on the new ssd. I have started taking stuff over to the new drive by switching back and forth and using a third drive in the machine as a carrier. Some have worked some have not.
Question2.... Is it possible to take mavericks off the HD and use the disk with just the applications and stuff the applications need. or temporaryly disable the OS on the HD (how would I do that if possible} and change it with another drive in the machine. thanks for any help.... Tom

Yes you can but Carbon Copy Cloner will happily do what you need.
Install TRIM Enabler first.
leave the drive as is, it will be your backup and safety net.
I would get a new drive for your data.
You could backup to TimeMachine and have a clone backup and then wipe the old drive.
Your SSD will need a drive sled adapter usually, $14.
Done every day for the last 6 years since SSDs came out. And discussed and asked here just as often.
You just have to use a program to move the system to a new drive, great for working backups that will be bootable and should have been doing all along.

Possible to have different names on one account?

Is it possible to have my account name different from the name on the registered credit card? My mother is allowing me to use her credit card for my Apple ID but on things like the iCloud it shows her name, since that's the name on the credit card. So, is there a way for me to have my name as the main account?

No.

Is it possible to have two Overhead rates-one based on Material and one based on direct labor? I am implementing a SAP Business 1 System.

Is it possible in SAP business one to have two Overhead Rates-- one based material cost and one for direct labor dollars?

Hi Dick,
Business one experts will be available on Business One forum and not here (Accounting and financial close). Click on the below link and start a discussion. Good luck.
SAP Business One Application
Thanks and regards
Sam

Is it possible to have 2 hard drives, one base stock model, and one new ssd in the dv8t-1100?

I am currently thinking of upgrading my laptop. I have an old DirectX 10 card and no SSD. I was wondering if it's possible to upgrade those items on the HP Pavilion dv8t-1100. Preferably, since this is an 18.4'' notebook, I would like to keep the HDD it came with as data storage, and install a modestly sized SSD for all the program data. If the video card can be upgraded to a DirectX 11 compatible card, that would be awesome too.

I don't think that you can upgrade the graphics chip. You will have to replace the motherboard with a better graphics in it (if any is compatible). As an 18" inch laptop it could have a secondary hard drive bay but a solid drive may not be compatible with it (BIOS) anyway.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Possible to have multiple microfeeds on one page?

Hello,
I've been searching on this for a while now but I haven't been able to find a documented answer.
Is it possible to present multiple microfeeds (site feeds) on a publishing page where I target each feed webpart with different audience?
Please correct me if I'm wrong:
As far as my tests go, I can only add one "Microfeed" list by activating the site feeds feature. However we have a request where we should show feeds based on each country so you only see the feed for your own country.
Whould that be possible? I've also tried to add a site feed on a subsite but I can't figure out how to roll that one up on the front page with the content search webpart or something similar.
Thanks for your help

Hi,
Thanks for the reply. yeah it seems that there is no way to avoid this.
We would like to use it on our intranet (based on publishing template). It could be nice to show a newsfeed/sitefeed for earch country based on audence. I guess the correct solution then would be to create a subsite for each country and then activate the
feature there and make the default homepage http://<intraneturl>/<country> for each users?
Anyone having further suggestions? If I have http://<intraneturl> as my default homepage how would I automatically be able to redirect all users from a specific country to http://<intraneturl>/<country>?
Thanks

Is it possible to have different versions of one presentation?

I use keynote presentations for two different courses. Often I am a little bit faster or slower with one group, but I each group will see all the slides one day or the other. So my problem is, that I have to remember for each slide, if I've already used it or not or in which group I've used it. As the slides get more and more, this is getting annoying.
So, is there a possibility to mark the slides in some way? It would be nice to have tags or groups for the slides (in my case the two groups) and each slide belongs to none, one or many of them. And then, when I want to play the slideshow I can choose for which group. Is something like that possible?
I am still using Keynote '08 (4.0.4). So maybe there is something like that in Keynote '09 (or a new version)?
I would be very thankful for any information

Hi,
from the panel on the left hand side (where you see all the slides vertically), you can select one with your mouse and slightly drag it to the right, so as to create a sort of indentation.
would that work?
Ricc

Is it possible to have a mask on one layer affect layers below it? AECS6

I am animating a stick figure (because I'm an awesome artist! ) Anyhow the head is made up of a hollow outlined circle, and I want to have the stick man raise his arms, and have the head block the arm that passes behind it (Instead of showing the arm through his head) Is this possible? If so, how can I accomplish this?
Thanks all!

To mask you need an alpha channel. If you just have a stroked shape layer for the head then you don't have an alpha anywhere but over the stroke.
You'll have to fill the shape and either duplicate it and use the duplicate as a track matte for the arm layer or you'll have to set a mask on the arm shape layer that's exactly the same size and shape as the head.
If you need the head shape not filled then you can turn off the fill for the head and still use the track matte.
If you can use the head shape with a fill then you can just stack up the layers in the right order and the hand will be blocked by the head shape.
There are so many ways to do this kind of thing that a screenshot would be very helpful.
Here's a setup with a track matte and a hollow circle for the head. I've selected the hand so you can see the paths. Notice how the stroke dissapears behind the head layer.

Is it possible to have multiple emails on one server?

As the topic says, can i have more then one email service running off of the same server.
example:
[email protected]
and also
[email protected]
I have both domain names and have different websites for the different business. I need to give @something.us to some people and @somethingdifferent.com to others......
Thanks!
Adam

Yes, it's possible to do, but non trivial.
It's easier if every username exists in both domains (e.g. [email protected] is the same person as [email protected]), but it's still possible to do if they're different.
There are two approaches to doing it. Which one you use is up to you.
The first is to use Open Directory and add the email addresses as additional usernames for each account.
For example, you may have a user 'joe' who exists in domain2, so you'd give him the shortnames 'joe' and '[email protected]'. User 'bob' in domain 1 would have the shortnames 'bob' and '[email protected]'.
Note that both users exist in the main directory domain, which could be an entirely different domain.
The second method is the pure Postfix method and involves configuring postfix on the command line to support multiple domains. You'll essentially build a text file list of the names in the secondary domain(s) and will maintain this separately from the main server GUI tools. This optioni s covered in some depth in the Postfix Virtual Domains page.

Is it possible to have 2 ipods on one computer?

I just purchased the newest 30GB ipod after having last years model. Can I make a new library or download the new itunes without losing my old library?

Yes. Infact this is answered by Apple in their "Frequently asked questions (FAQ)". I have a 30GB Video iPod it is set up to connect and auto update. I also have a Nano and it is set to manually update.
Check Apple's FAQ

Is it possible to have 2 display names (one for internal use; the other for external use) in Active Directory?

The idea:
When communicating amongst our own staff via email we'd like to see our display names in this format:
Firstname Lastname (Division/Department/Branch/Unit)
Whereas, when we send emails to people outside the company, we'd like to be seen as:
Firstname Lastname (Company Name)
Is this technically possible?
Regards,
Anthony

Please read about Exchange Simple Display Name if you are using Exchange in your environment. It should be suitable for your needs, but as far I know not every Exchange version support it.
In Exchange 2003 this Simple Display Name was at Advanced tab of user, but now..
With Exchange 2013, SimpleDisplayName is configured using Exchange Management Shell (EMS)
Example:
Set-Mailbox ALIAS -SimpleDisplayName $True
..and as with Exchange 2007/2010, you will need to enable UseSimpleDisplayName on RemoteDomain.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Possible to have multiple views for one scene?

Away3D allows multiple Views to be created for one Scene, allowing different camera positions for the same geometry.
Can Proscenium support this? I've been banging my head against a brick wall for a while now...
Joe

Hi Kopaacabana,
(I feel like I'm in one of those post-apocalyptic scenes where the last two humans left on earth finally meet.....)
Thanks for answering!
Yes, I've actually got two cameras quite happily working in the scene, the problem is that I need to re-use the geometry for the scene in two windows, or at least, two separate parts of one window simultaneously. Away3D can do it very easily, where one sets up a 'View', which has a 'Scene' it views. With Proscenium it seems that the whole thing is tied up with an Instance3D, which is fine for one camera, but the scene nodes seem tied up as children of some root scene node. I've tried assigning the scene data as a child of two instances of BasicScene (hacking the stage3ds[number] to be different for each), but that causes an exception.
Just changing the activeCamera changes the view to the new camera, where I actually need to be able to render to two windows/screen areas from one set of geometry.
I would have hoped that the paradigm would have been 'here is some geometry, lights, etc., now do with it what you will'
Adobe, are you there to help us out, like, anyone at all? Are we wasting our time with this?
Joe

Is it possible to have 2 iTunes Libraries, one for ATV and one for Ipod?

Now realizing that I need two different fomats for my movies in ATV vs. the Ipod, and not liking the fact that now when I stream I have two of every movie showing, I am wondering if there is a way around this.
Is there a way to set up two separate iTunes libraries on the same computer so that you have one for ATV and one for the Ipod. Then you could goto the movies file in the first iTunes library (as well as whatever music) and pull all of the Ipod formatted movies out and put them in the second library for syncing with the Ipod. Is this doable or do you need separate computers? What about having the libraries on separate drives and then picking which library you wanted to use when you opened iTunes?

Yes, you can have two libraries, and there's a shareware program called Libra for easy switching between them. You should keep the Library file(s) local on your computer, but you can have the actual media files anywhere.
The only downside to having several libraries is if you have stuff that you want in both of them (like your music for example) you have to manually add it to both of them.
The Alternative would be to sync only playlists of movies - if iTunes would allow movie playlists. A workaround is to label the movies as two tv series (like "iPod" and "ATV") and have each synced to the respective device.

IPhone and IPod is it possible to have two sync on one mac

I have the new phone - love it but I want to keep my old IPod (8GB is not enough). How (can) I do that?

Yes you can I have a nano, 60GB video and iPhone syncing to the same library

Is it possible to have mixed orientations in one folio?

Similar Messages

Maybe you are looking for