Is it possible to have my Bluetooth Speaker and my output speakers working together simultaneously?
I have a Bose SoundLink Mini Bluetooth speaker and a output speakers. My output consists of 2 Fisher Speakers and a Kenwood Amp that uses RCA to 3.5mm audio output. When I got the SoundLink Mini, I found out that I could no longer use both speakers at the same time. I've tried doing the whole "Audio MIDI Setup" tool, that still does nothing. I'm using a Late 2012 Mac Mini, 2.5 GHz Intel Core i5, 8GB RAM, and a 733GB Fusion Drive setup. Can someone help me please..?
https://discussions.apple.com/thread/5686571?tstart=0
Similar Messages
-
Both left speaker and headphone output not working
I noticed a week ago that the left headphone audio output wasn't working, and shortly after I realized that my left speaker wasn't working either. I thought maybe it was a matter of updating some software, but everything is up to date. Anyone encouter this problem before?
Solved my own problem,
System preferences - sound- output- balance.
Strange thing is I don't recall adjusting those settings. Hope this is helpful to anyone else who has this issue! -
Bluetooth Mouse and Thinkpad T520 not working together at all
Hi All (first post),
System:
Lenovo T520
Windows 7
Microsoft Bluetooth mouse
Problem: Not working at all, or working only sporadically.
History: Laptop is a bit over year old (warranty ends in June 2015 IIRC). The sales clerk recommended a bluetooth mouse, so I bought a Microsoft Bluetooth 5000. After the initial pairing difficulties were resolved, they worked swimmingly for about a year. Then I started more and more frequently having to re-pair them (remove device, let Windows find it again, pair them,...). As the mouse had taken a bit of beating, I bought another one a week ago. Didn't really help. The first time I asked Win7 to find the device, it couldn't. The Bluetooth radio was on, and the mouse had a fresh set of batteries, and all the other braindead suggestions of Win7 were eliminated. The bluetooth radio was working, because it detected the neighbors daughter's smartphone through a concrete wall, but not the mouse. I kept pressing the button in the bottom of the mouse that presumably makes it broadcast "I'm here".
I moved to another room. This time detection and pairing up the device went fine. But after I had switched the laptop and the mouse off, and rebooted - nothing happened. I had to go through the remove/add device cycle again. Moving to a different room again. At first nothing. Then Windows finds the device, but gives the error code 0x800070015 (or something like that, not sure about the number of zeros), and fails to configure it.
Any idea what is going on? Why is this becoming progressively worse?
Elsewhere in this forum it was suggested that I should disallow windows to power off USB root hubs. I tried that but it had no effect.
Regards,
JyrkiSorry. The error code was 0x80004005. This is the code I get from Add Device ->, when I try to enter 0000 as the paring code (suggested by the mouse start guide. If I try to pari them without a code, Control Panel first indicates that the piece of Hardware was added ok, but it before I get any use out of the mouse, the freshly added pic of the mouse disappears. The red/green light on the mouse never stops blinking.
-
Is it possible to attach a bluetooth speaker to my mac and still use the mac's speakers at the same time, so I can have music in two rooms (from the mac in the lounge and the bluetooth speaker in the kitchen? It seems to be a choice of either/or as when I pair my speaker the sound stops from the mac's speakers.
No.
-
I have a speaker that I am connecting through my headphone jack but I have a bluetooth speaker in another room that I want to play through as well. Is there anyway I can play to both speakers at once? I saw another post on line that suggested going to the Audio MIDI setup and adding additional output devices. The problem is, I see that on my computer but nothing for my iphone. Can this work? I have also seen things for airplay and of course this is all making my mind fuzzy. Help!
Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff. -
Is it possible to share 1 bluetooth keypad and 1 mouse pad between two computers in target mode?
Is it possible to share 1 bluetooth keypad and 1 mouse pad between two computers in target mode? Grab a drink and let me tell you my story.
I purchased two computers... an iMac 27" i7 3.4 16GB RAM and a Mac mini 2.3 i5 8 GB RAM. Both have Thunderbolt capability and are in fact connected by thunderbolt. I have 3 problems...
1. My Mac mini WILL NOT recognize any bluetooth keyboard. Let me back up for clarification. I set my iMac up first. No problems there. I then went on to set up my mac mini. A couple of interesting things happened concering bluetooth activity. First thing is that the keypad, which was already paired with my iMac wouldn't be recognized by the mac mini, and yet my bluetooth mouse which was paired with my iMac became paired with my mac mini and thus wouldn't be recognized by my iMac anymore. I had to go to my back room and dig out my other bluetooth mouse so that my iMac would at least recognize my second mouse. So now I have two "mice"presently. One for the mac mini, the other for the iMac. Thankfully I also had a USB keypad for my mac mini. My bluetooth keypad is still paired with my iMac but won't pair with my mac mini, which brings me to another question....
2. CAN 1 KEYPAD AND 1 MOUSE PAIR WITH TWO DIFFERENT COMPUTERS SO THAT WHEN I GO INTO TARGET MODE VIA THUNDERBOLT I CAN USE THE SAME KEYPAD AND MOUSE FOR BOTH COMPUTERS? Anybody have some thoughts on that problem?
3. WHY IN THE WORLD IS MY MOUSE CURSOR DISAPPEARING EVERYTIME I EXIT TARGET MODE VIA PASSWORD AND COMMAND F2. I'm using target mode to access my mac mini. But when I exit target mode to get back into my iMac I'm looking at my iMac screen but I can't see the mouse pointer! I can move the pointer around even though I can't see it. Wierd. And this has apparently been going on for some time with other users for over a year. I am presently completely up to date on Lion updates. Both systems are running 10.7.4. Does anyone have a solution or heard a rumor of a solution coming soon regarding the invisible mouse cursor "curse". I hate having to restart my iMac everytime I exit out of target mode just so I can get my mouse cursor visible again.
Food for thought.... Wouldn't it be really cool to have a target mode capability to see your other computers desktops in seperate window screens on your main display. You then could go back and forth from each window by just double clicking or by certain key commands. You could drag and drop from desktop to desktop. Tell me this is coming soon.
ThanksThere was a duplicate post of this question answered at:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HExpertOnly=&HFORCEKWTID=8448:5&HOID=50650000000800000065190000&UCATEGORY_0=_26_%24_13_&UCATEGORY_0=_26_%24_13_&UCATEGORY_0=_26_%24_13_&UCATEGORY_S=0 -
Hello, I have recently purchased a new Bluetooth speaker and I would like to use it with my already working home audio system which I control with the airplay feature on my Apple TV. I tried to use the airplay function on my iPhone 4S and connect the 2 at the same time but It would only let me connect one. If there is an app that will allow me to connect the Bluetooth speaker and the Apple TV simultaneously thought my iPhone 4S or any other solution please feel free to let me know. Thanks...
There is not one and it cannot be done at this time.
-
I have Sunglasses Bluetooth Headset and Apple Iphone 4, I Can Communicate Calls Using Headset. But I can't Listen Musics Using Headset.
The iPhone supports the following Bluetooth profiles. http://support.apple.com/kb/HT3647
In order to play music through the headset, it must support this particular profile, A2DP. You can check the specs on the headset to see if it does support that. Not all headsets that support phone calls will support music. -
The only time the sound/speaker and mic don't work is when I answer or make a call
The only time the sound/speaker and mic don't work is when I answer or make a call. They both work fine for everything else. This has been going on for over a month. AT&T said it's Apple and Apple said it's AT&T. I've been around that cycle twice.
When I dial a call, I can see the status words on the screen but can't hear the ringing. If the person I'm calling answers, my screen will show the call was connected and the call timer will begin but I can't hear anything and they can't hear me. If one of us doesn't end the call, the timer keeps going and I'm being 'charged' for dead air. (Of course, one of us disconnects so mins/cost isn't an issue, I'm just adding the info in case it helps solve the problem.) If they don't answer, the call will go to their greeting but I can't hear it and wouldn't be able to leave a message anyway because my voice isn't going through. However, they will get a voice mail alert and see that I called but no message was recorded.
If some one tries to call me they will hear ringing but when I answer, they can't hear me and I can't hear them. If I don't answer, they will hear my greeting and can leave a message. I can retrieve and hear my voice mail. Trying speaker phone and headsets didn't change anything for calls out nor for calls in.
I have 4.3.3 and have synched, reset, rebooted, turned things on and off and off and on and took the SIM card out of the phone and out of it's tray and put it back in. I've done all that several times in just about every combination and order possible.
Hopefully the following will provide good clues: On only about three of the many attempts I've made to get it to work correctly that included taking out the SIM card, I could make and/or get one or two calls with no trouble but then the problem comes back. Also, when I swapped the SIM card with another iPhone4 on my plan, the other phone would work with my SIM card but my phone still would not work with the other SIM card. The last fact makes me think it is an Apple issue. I'll go to an Apple store (genius) this weekend. Will I be wasting my time and gas? Anybody have any experience with this problem?Let me try and address some of your questions. I'm only on a pc, so a few of these answers might be slightly different on a Mac, but not too different (such as control click rather than right click).
First, when you buy something on your phone, be it apps or music, it's transferred from your phone to your Mac when you sync your phone. So those apps should now be in you iTunes library. ( IF for some reason you can't find them there, you should be able to download them again, either onto your phone or through iTunes. On your phone, go to the App Store > Updates and you'll see a "Purchased" link at the top of the page, you can view all purchased apps here and redownload them. In iTunes, you can go to Store > Check for available downloads. )
Whenever you plug your phone in, it should create a backup of everything you have on the phone. This is how, provided restoring your phone as a new device doesn't fix the issue (more on this later), you can put all of your music and apps onto the new phone. You can always plug your phone into your Mac and the first thing it should do when it syncs is create a backup. If you want to be sure, you can right click on your device in iTunes (on a pc) or I assume control click on a Mac and select "backup".
The genius will take care of the sim card and setting up your phone, however you will have to put all of your music and apps on it, unless you ask the genius, I've never bothered since I know how to do this.
You should have no problems restoring from a backup if they give you a new phone. However, it's probably safest to try and create a backup of your last phone backup before you restore it as a new device. I suggest you refer to http://support.apple.com/kb/ht1414 for more information about that.
I've had no problems with my new phone so far.
I'll try to keep checking this thread if you have any other questions or need more clarification.
Edit: I should say we never did figure out what exactly was wrong with my phone. The only thing I can think of was that it got a lot hotter than the phone it replaced, and also the phone I just got yesterday to replace the malfunctioning one. But otherwise they saw no problems with the hardware, but acknowledged it must have been the hardware since we tried everything else. Also I would go with a list of all the things you tried with this phone, for your own reference and the genius's, especially if you're not confident in your tech skills Showing the genius that you've tried: different sim cards, updating the software, restoring it from a backup, and now restoring it as a new device, should convince them that you've done everything you could, and the only other answer is hardware problem.
Also if you don't already have one, make a genius appointment ASAP. Most stores are very busy and their appointments fill up fast. I always suggest making an appointment as early as possible, hopefully before the retail store hours when they've only got techs there because they usually are less stressed and have a bit more time to spend with you. The easiest way to make an appointment is to download the Apple Store app. It detects the closest Apple store from you and makes it quite easy to schedule a genius.
Message was edited by: deddinty -
I have upgraded to ios5 and Facetime no longer works. I have tried turning it off under Settings and then back on, but it still doesn't work. The symptoms are the same as what I read but the solution that has worked for some has not worked for me.
Hi,
Try restoring your iPad.
If not speak to someone at the genius bar in Apple -
HI my name is Ehab Hejazeen. Im from Mapusa goa india.i have lost my iphone some time back. i recieved it as a gift from my uncle from dubai so i dont hav the imei number and he does not work there anymore. Please track my iphone . I will be waiting for your response. please help me..
yours sincerely,
Ehab hejazeen
<Email Edited By Host>As already stated, no one but the police can help you. I suggest you follow Apple's recommendations as quickly as possible: http://support.apple.com/kb/HT5668
-
After using headphones for about an hour both my built-in speak and head phone stop working
After using headphones for about an hour both my built-in speak and head phone stop working, what could be wrong? I have checked system preferences and all appears ok there but still no sound
Your put your Air into sleep mode with headphones attached, I assume.
Upgrade to the latest OS to resolve that issue.
10.9.2 Apple icon upper left "software update" -
After a rescent update on my ipad 3 I can no longer connect to my pc with WIFI. I have tried resetting ipad and itunes but nothing works. Talked to support and they were no help. Any suggestions?
What error do you get if any?
Have you tried connecting to another network besides your own?
Do you use DHCP on your router or static IP address? -
Hi I have an iPhone 4 and suddenly it stopped working. Could here notifications and nothing on the diisplay. Wake up button on top is not working. so unable to restart the phone. Wanted to try restore from iTunes but Find my iPhone (iCloud) is on. How to recover or restart my Phone
Follow these steps to log into your iCloud account on your computer and deactivate "Find my iPhone" on your device:
Remove an iOS device or Mac on which you can’t turn off Find My iPhone
If you can’t turn off Find My iPhone on the device, turn off the device so it goes offline, then remove it from Find My iPhone on iCloud.com.
Note: You can also remove your iOS device by first erasing it—just follow the instructions below for removing an iOS device you don’t have. You can later restore the device from an iCloud or iTunes backup.
Turn off the device you want to remove.
Sign in to icloud.com/#find on another computer with your Apple ID (the one you use with iCloud). If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, select the offline device, then click Remove from Account. If you don’t see Remove from Account, click All Devices again, then click the Delete button next to the device. If the device comes online again, it will reappear in Find My iPhone. If your device reappears, turn off Find My iPhone on the device (follow the instructions above for removing a device by turning off Find My iPhone), or if it’s an iOS device and you no longer have it, follow the instructions below for removing an iOS device you no longer have.
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud). If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.
Note: If you’re trying to erase a family member’s device, that person will need to enter his or her Apple ID password on this device. If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased, and someone else can now activate the device.
copied from: iCloud: Remove your device from Find My iPhone -
i have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Malvinfromny wrote:
... i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...
Maybe you are looking for
-
Upgrade from 4.6C to ECC6.0 - development quality and production
Upgrade from 4.6C to ECC6.0 I have got three systems right now... Development(D1) Quality(Q1) Production(P1). These three systems need to be upgraded to ECC6.0 The recommended process is to copy D1 to a new temporary server(D2) and then upgrad
-
SharePoint 2013 and SQL Reporting Services Integration Mode
I'm setting up a production environment with SQL Server 2012 SP1 (Clustered) and SharePoint 2013. I successfully setup the integration using PowerShell (Install-SPRSService & Install-SPRSServiceProxy). I can see the SQL Reporting Service on the CA Se
-
Docker best Practices (Get IP of linked container)
I've recently started looking into docker, and I like what I see. The whole stuff is not too complex and it is easy to get something running. There is one thing that I just couldn't figure out yet. What is the best way to get the IP address of a link
-
XI Mapping : multiple msgs in, one msg out ???
Hi All, Is it possible to receive multiple iDocs from SAP, and map them into a single outbound file ? Is this easily possible ? Thanks.
-
SCOM ACS Reporting - Not Working
I am encountering following error while running audit reports in SCOM console- Cannot create connection to data source 'datasource1',(rsErrorOpeningConnection). Can anyone help me out on this?