Is it possible to have other recording qualities for iSight camera?

I have just lashed out on +QuickTime Pro+, and the very first time I fired it up I thought: "Oh, Oh, I've wasted my money". Every other program I tried before I decided on QT Pro had the ability to use a variety of recording-quality settings for the iSight camera. With QT Pro I get just three:
* MPEG-4 (320 x 240, ~ 264 kb/s)
* H-264 (320 x 240, ~256 kb/s)
* Native (640 x 480, 90 Mbits/s)
Not much of a variety. You either choose the low settings, or jump to the high setting at almost 400 times the data rate.
Is it possible to obtain a few more settings ( i.e. 640 x 480 using H.264) via third-party software or other technique?
Also, can I turn off sound recording if I so wish?

Thanks, RickToronto, for the suggestion about +QT Broadcaster+. A nifty little program and I'm sure I'm going to be able to put it to use sometime, but after testing the various compression options at 640 x 480, including NONE, I could not get the frame rate greater than about 10, whereas using the NONE option in +QT Pro+ allowed me to get 640 x 480 at 18 fps. There must be a fair amount of overhead in using +QT broadcaster+.
Looks like I'll be sticking to +QT Pro+, recording using the NATIVE option, then compressing afterwards. Doing that certainly shows up the amount of computation needed for compression. It took my G5 about 6 hours to compress one hour of 640 x 480 @ 18fps (~40 GB). And in addition, I got the impression that the output looks better from +QT Pro+ than from +QT Broadcaster+, but that might just be my imagination.
One last matter: one of the options in +QT Broadcaster+ -- the control options for iSight -- look almost identical to those I saw in a program called +BTV Pro+. Would the +BTV Pro+ fellow have 'borrowed' the look from Apple, or has Apple licensed them from him?

Similar Messages

  • Is it possible to have different pricing procedure for SO  and invoice?

    Hi,
    Is it possible to have different pricing procedure for SO
    and invoice?

    Hi Kiran35086 
    --Yes you can have it.But it is based on the business requirement
    --Create 2 Document pricing procedures & assign one in VOV8 & another in VOFA
    --In Sales Document VOV8 you maintain different  document pricing procedure Ex A
    --Go to VOFA & select your billing document type in Account assignment/pricing assign the document pricing procedure.EX- B
    --Create condition records in VK11 for the condition types which are included in the pricing procedures
    --Maintain pricing procedure determination in OVKK with 2 different Document pricing procedure & save it
    --When you raise SO in VA01 you will find one pricing procedure & when you raise billing in VF01 you find another pricing procedure in conditions.
    Let me know if your problem is solved
    Regards
    Pradeep

  • Is it possible to have two USB drives for the IPad?  I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive.  One of my cameras does not use an SD card.  How can I do this?

    Is it possible to have two USB drives for the IPad?  I want to bring RAW files from my camera through the IPad and out to an external hard drive.  One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line.  Realted to this, I bought the IPad camera accessory.  Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive?  Can I put Lightroom or the Nikon photo editing software on the IPad?  Right now I carry a PC laptop and external hard drives with me on wildernes trips.  Internet and WiFi are not available.  Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad).  I have Nikon NX software and lightroom on my PC.  I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips.  Is this possible and how would I do it?  I'd appreciate any guidance.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • Is it possible to have Different Interval Ranges for the same Doc Type

    Dear All,
    Here is the issue.Is it possible to have different interval ranges for the same document type according to certain condition.Like my client , wants his interval ranges  be divided according to region(which are many)
    Regards,
    Sameer Jalees

    Hello,
    As you know we can only assign one number range for External and one number range group for internal in the sales document type.
    If you want different number ranges based on the regions, then as Jignesh suggested, you need to go for an enhancement.
    Use the exit USEREXIT_NUMBER_RANGE in program MVA45AFZZ, include a Z table with region as a critera and number range group for different numbers based on the regions. Talk to the business and get more details, get the help of ABAP team for technical details.
    Regards,
    SAM

  • Ist possible to havea ASN(Inbound Del) for schedule line?

    Dear Gurus,
    I am not having much knowledge about the inbound delivery... ist possible to have a inbound delivery for a Schedule line?
    Regards,
    Kumar

    HI,
    YES.. It is possible. check the below link and the pictorial representation
    http://help.sap.com/saphelp_47x200/helpdata/en/75/ee13e855c811d189900000e8322d00/frameset.htm
    in this check vendor confirmations -- Procurement Using Vendor Confirmations -
    Confirmations from Materials Planning Viewpoint -
    Influence of Confirmations on Materials Planning
    Inbound Data contains
    Document Header
    The general data relevant for the inbound delivery is stored in the document header. This data is valid for the entire document. This data may include:
    Goods receiving point
    Scheduling data (goods receipt date or delivery date, for example)
    Weights and volumes for the entire inbound delivery
    Vendor number
    Route
    Document Items
    In the items, you find data that applies to one particular item. This data may include:
    Material number
    Delivery quantity
    Plant and storage location specifications
    Putaway date
    Weights and volumes of the individual items
    Thanks & Regards,
    Kiran

  • In WM is it possible to have a TR's for Inbound and Outbound deliveries?

    Hi All,
    In WM is it possible to have a TR's for Inbound and Outbound deliveries?
    In WM is possible to create a TO without TR being created?
    Please let me know the configuration for the same!
    Thanks in advance,
    Kumar

    The delivery itself is treated as transport request, hence you cannot get an extra TR.
    Using LT01 with movement type 999 will create a TO without needing any TR.

  • Is it possible to have a permanent signature for texts?

    I s it possible to have a permenent message for text messages? I just got an iphone and can't figure it out. My old LG Chocolate had this feature.

    The iPhone doesn't have this feature.  Only available for email.
    If you haven't found this yet, iPhone iOS4 User Guide

  • Is it possible to have a window open for my library and the Itunes store so that I can toggle between the two?  I want to check my library before I purchase songs to make sure that I don't already own them.

    Is it possible to have a window open for my Itunes Library and Itunes store at the same time so that I can toggle back and forth between the two.  I want to check my library before I buy songs to make sure that I don't duplicate.
    Thanks!

    No.

  • When I record with my iSight camera, after a few seconds it stops recording and tell me there is "Dropfame" images. What do I have to make?

    When I record with my iSight camera, after a few seconds it stops recording and tell me there is "Dropfame" images. What do I have to make?
    A few weeks ago, my camera doesn't do that, but since 1-2 weeks it becomes impossible to record with it.

    Hi mstearns59,
    If you are having issues with the audio in a movie in iTunes and video playback issues I would suggest that you troubleshoot using the steps in this article - 
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Simple question! Is it possible to have a custom icon for an app part?

    Hi All
    Title says it all: is it possible to have a custom icon for an app part / client web part?
    It used to be straightforward with the previous dev tools, but the ImageUrl was typically to a hive folder (which is obviously out of bounds now).
    I've "Binged" with no joy. None of the samples I've seen have a custom icon.
    So - can it be done?
    Regards
    Nigel

    Hi Nigel,
    Updating the AppIcon.png in Napa
    You can upload a new AppIcon.png in into the /Images folder in the file tree in Napa:
    Updating the AppIcon.png in Visual Studio 20102
    You can update a new AppIcon.png in into the Images folder in your Visual Studio solution:
    Keith Tuomi | Twitter: @itgroove_keith | Blog:
    http://yalla.itgroove.net
    Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you.

  • Possible to have vertical scroll bar for a cell in ALV Grid (using methods)

    Hi All,
    I have a field with length 100 characters on a ALV Grid (using methods)..User doesn't want to scroll all the 100 characters horizontally to see the whole text rather he wants to have a vertical scroll bar for the cell so that he can scroll vertically.
    Is it possible to have split the cell text into lines and have a vertical scroll bar for a cell in ALV Grid?
    Regards
    Jaker.

    Thanks for the suggestion Balu.I tried this , but while scrolling,headers also getting scrolled.
    Becoz of this , if i scroll down to the last row,headers are getting hidden.
    Headers should always be static.only the data should scroll.
    Since h:datatable is being rendered as one table , i can div tag for this table alone.
    If i have seperate datatable for headers alone i can do this .But i should not use two datatables.

  • Is it possible to have different font sizes for different apps in ios 8?

    I would like to have a large font for text messages, but when I change the font size, it changes pretty much across all of the standard ios apps. There are some of these apps that the large font just doesn't really work well for, and I would prefer a smaller font for those. Is this possible?

    No sorry, What about using Zoom instead? Settings > General > Accessibility
    Be sure to read how to use it or you'll be back asking how to get out of it :-)
    https://www.apple.com/accessibility/ios/#vision

  • Is it possible to have  2 different account for the developer program?

    Dear All,
    I would like to Know if I can have two different account for the Developer program?
    I am signed in as developer for my company, but I would also like to have my private account to pubblish my private stuff.
    DO you Know if it's possible?

    Those should be considered two separate/different accounts, so yes, you can do that. It's just money at that point

  • Is it possible to have different CHARM process for R/3 and CRM system

    Hi all,
    I am currentlu workin on CHARM implementation and we have successfully gone live for R/3 System now we need to implement CHARM for CRM system. The Customer is asking to define a new Change request and new Urgent correction for CRM system as there is different approval procedure for CRM when compared to R/3 Now i want to know whether we can have a different CHARM process for CRM system alone, kindly give ur valuable inputs as it is very urgent.
    Thanks in advance
    Raju

    Once the pricing procedure ia assigned to sales order, it is automatically copied into Invoice through Copy controls. You never assign pricing procedure to billing document. it is automatically copied.
    Regards
    AK

  • Other uses for iSight camera??

    I was just wondering:
    Many DVD recorders have a firewire input for copying DV tapes - can the iSight camera be connected to make live recordings?
    Some DV camcorders have DV input (for recording from other sources and copying iMovie projects back to tape) - can the iSight camera be connected to the DV input for aux camera?

    Hi spacepiggy,
    You takes your choice
    http://www.ralphjohnsuk.dsl.pipex.com/EZJim/EZJimpage7.html
    1:54 PM Wednesday; December 6, 2006

Maybe you are looking for

  • Java source version compare

    How do you view the code differences for .java files versioned in a web dynpro project?   They are not in the src fiolder for either active or inactive DC.  I do see they are under the gen_wdp folder but the version tools are disabled there. This I a

  • Broken iPad Screen

    I dropped my iPad 2 and the screen is broken. The touch still works normally but the glass is cracked. Will the apple warranty cover this for free and if not how much would a repair or screen replacement cost?

  • New Stored Proc For Patch 20  ? SBO_SP_PostTransactionNotice

    Does anyone know more information about this stored proc and at what stage it is fired? I assume it is after an object has been "Added, Updated, closed etc..." and this will allow us to then perform some actions Is this correct Please Help

  • Master data request id?

    Hi all, I need to check the values of the master data(attr) request by request. How to view the values of the master data(attr) of a particular request only? or can anyone tell me in which table the master data request id or request no. is stored? Th

  • Can I install 9irel2 on Win 2000 Prof

    simple question, yes or no will be fine: Can I install Oracle 9i rel 2 on Win 2000 prof? thx