Is it possible to have same patch in different sets?

My MainStage is going to have it's first gig on 29th. I'm now organizing the patches so that changing them would be as fluent as possible. The most practiful way that I've come up with is to have a set per a group of songs. Now, I have two patches that I use in every song and I'd like to have these patches in all of the sets. Is there a way to actually use the same patch (not a duplicate) over and over in the patch list? Or isn't it a memory consuming way to duplicate the patch many times?

gilapuki wrote:
A thought that might not work. I know it is possible to set up synths at the set level. Is it possible to set up both your patches at the set level? Perhaps even at the concert level? I will have a play with this idea tomorrow.
This would actually be the most efficient way except that the way MS is designed is that any patches that are loaded at either the Concert or Set level will always play whenever you play any other patch. It would have been nice if Apple would have set up MS so that you set up all the instruments you wanted to use for an entire Concert and then set up your patches that point to the instruments you want to use for a specific song, but the instrument only gets loaded once.
It's been a long time since Apple has said anything about MS or Logic for that matter so there is no telling when they might do anything to fix some of the more irritating bugs let alone change the functionality to be more efficient like this.

Similar Messages

HT204053 Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

mannyace wrote:
Thanks for the response.
So I basically won't run into any trouble? I
There should be no issues. Its designed to work like that. You don't change Apple IDs just because you get a new device.
mannyace wrote:
Thanks for the response.
Is there any chance that the phones can fall out of sync?
Unlikely. But nothing is impossible. Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
mannyace wrote:
Thanks for the response.
If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
Images, can be transferred either through Photo Stream
My Photo Stream FAQ - Apple Support
Or any Cloud service you want such as Dropbox, or One Drive.
mannyace wrote:
Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

Hi can someone tell me if it is possible to have two accounts (from different countries) in the same laptop?

Hi...
The issue is that your credit or debit card credentials must be associated with the same country where you reside to make purchases.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article
Billing policy is the same for both the iTunes as well as Mac App Stores.

I have a MacBook Air w/ 64 GB. I have hours and hours of music/vids/etc. Is it possible to have an external drive specifically set-up for my iTunes? If so, what do I need to do? Thanks!

I have a MacBook Air w/ 64 GB. I have hours and hours of music/vids/etc. Is it possible to have an external drive specifically set-up for my iTunes? If so, what do I need to do? Thanks!

Yes, many people do just that. Copy your iTunes folder to the external drive. Once done, open iTunes with Option held down and select the new location of the library file.

I have 2? How do I sync selected photos from my IPad to my IMac w/o losing all photos on my IPad and getting the phoos o my IMac. ou see I have two IMacs with different sets of photos. Also want to convert all Apple works docs to pages docs on my IMac.

I have 2? How do I sync selected photos from my IPad to my IMac w/o losing all photos on my IPad which will be replaced with the photos on my IMac.You see I have two IMacs with different sets of photos. Also want to convert all Apple works docs to pages docs on my IMac. Is there and app available to do the former. many thanks. b

The iPad and related software is designed to sync with only one computer. I suggest transferring the photos from one of your iMacs to the other so that all photos are on one Mac. Same for all other files you want to sync over.
To get those AppleWorks files to the iPad you'll have to determine if Pages will open them. If it will then use the file sharing feature of iTunes to copy them to Pages on your pad.
If Pages will not open the AppleWorks files directly you'll have to save them in some format that Pages will read. These include but may not be limited to Pages and Word formats.

CUA needs to have same patch level as other systems?

I was just told that when patching our systems, the CUA system must be brought up to the same patch level. I thought the communication from CUA was via IDocs, so I don't quite get why they must be in synch like that.
Is there an OSS note addressing this? We're using CUA across companies and it isn't really convenient to apply support packages to every system we have at once.

Hi Christer,
I don't know the caracteristics of your Landscape, but usually is a good practice to have all system at the same patch level. Now, If you have a full system just for Central User Administration it won't affect the CUA funtionallity if the patch level is lower that the production/qa/dev systems...
Again, Its a good practive to have all your landscape at the same level.
Regards
Juan
Please reward with points if helpful

Is it possible to have same file size for different dpi?

I changed one.TIFF file (300dpi, 1024X1332) to .jpg files of four different dpi. But when I checked the four result jpg files, I found out that they are all in same file size and quality.( I also have checked the property of the files in the Windows.)
I think more DPI means more data and more file size. Am I wrong?
I use Photoshop CS 5.1(64bit, WINDOWS) - which is part of my Adobe Master Collection CS5.5.
TIFF(300dpi, 1024X1332) ->
1. JPG(72dpi, 1024X1332) : 306KB
2. JPG(108dpi, 1024X1332) : 306KB
3. JPG(144dpi, 1024X1332) : 306KB
4. JPG(600dpi, 1024X1332) : 306KB
I tested a few times more with different files. and same result comes out.(same file size for different dpi)
Thanks in advance.

Yes absolutely. Great observation. PPI does not control the number of pixels, just how big they are.
Now, if you change the PPI in the Image Size dialog with Resample checked.. then, that is a different story. In that case you will be changing the pixel dimension of an image (i.e.,changing the total number of pixels making up the image) while keeping its print size.
In your test files, you will notice all the print sizes are different, because all you were telling Photoshop to do was change the size of the pixels (if or when the image is ever printed), which is really just a bit of metadata of the file.

Is it possible to have unique pictures for different iChat accounts?

Hello -
I am new to Macs and am setting up multiple iChat accounts (Google chat, facebook, work, etc.). However, the work picture seems to be overwriting my picture in Google. Ideally I could have my casual Google picture and my more formal work picture coexist under a single iChat group of accounts.
I haven't found a way to do this yet. Any suggestions?
Messages version 7.0.1
Thanks!

Hi,
Although this was possible in earlier version of iChat it is not possible in Messages.
In earlier Versions you could set up separate Buddy lists (the then default)
At each Buddy List pic you could call down the change drop down and select a Pic.
It could be done for each Buddy list.
In Messages when you do this the Pic changes in all Buddy Lists.
NOTES
Changing the pic this way overrides the normal Choice which is the Contacts (Formerly Address Book) pic.
Changing the Address Book > My Card pic will override the Mac Users Account pic which is the default for that.
Put another way when you create a Mac user Account you get to chose a pic that is shown in the Login list (Also System Preferences > Users and Groups > your account).
This gets pulled to the Contacts/Address Book as the My card is created with your other details.
That is turn is used by Messages (or iChat in Earlier versions)
You can change them so that your have three different Pictures.
10:28 PM Friday; November 9, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Exported JPEG have same size with different PPI.

Hello, i just noticed that changing the PPI from 240 (taken with my Canon) to 100 and exporting the photos to JPEG sized as 2MP have no change at all in size. Shouldn't 100PPI be smaller in size?

A smartphone has a certain number of pixels on its screen. If you provide an image with that exact number of pixels, then it makes not the slightest difference whether or not the image is 240 ppi or 100 ppi or some other number. The number of pixels is the important factor, not the ppi. (By the way, whatever your smartphone display is still a "digital image")

I have IPhone4 on my PC in Itunes but my wife has just got IPhone4s but is not reconised in Itunes, is it possible to have 2 phones on different accounts in Itunes

How do I connect 2 IPhones in Itunes, I have had 4s on one account but when I try to connect my wife's new phone4s, it is not reconised, how can I get it to reconise it on a seperate account, Please

Hey there Redgolfer00,
It sounds like you have 1 phone that is recognized in iTunes but the new 4s is not. I would recommend the troubleshooting in this article named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Here is an overview of the troubleshooting to be done from the article:
1. Update iTunes
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Thank you for using Apple Support Communities.
Regards,
Sterling

Printing same smartform with different set of records continuously.

Hi SDNer,
Suppose a table contain Studet info like the following one:
ID   Name    Sub1       Sub2     Sub3
1    xxx        sb11       sb12     sb13
2    yyy        sb21       sb22     sb23
3    zzz        sb31       sb32     sb33
Think that the smartform contain only a single page(Suppose smartform of student result).In the Selection screen User can put the range of ID.When User put 1-3 the smartform print 3 pages---1st for the student with id 1,2nd for student with id 2 and 3rd for student with id 3.when user put the input 1-2 the smartform print 2 pages.I need your help to accomplish such a scenario.
Thanks in advance.
Regards,
Sarbajit.

Hi,
As per user's selection criteria you need fetch data in your driver program and need to store it in an internal table. The same internal table you need to pass to smartform. to handle your requirement of displaying one student record per page you need to use COMMAND node (with some condition). Using this you can force your smartform for page-break.
I hope this will help you to start and explore further.
Regards,
Sambaran Ray

Possible to have different names on one account?

Is it possible to have my account name different from the name on the registered credit card? My mother is allowing me to use her credit card for my Apple ID but on things like the iCloud it shows her name, since that's the name on the credit card. So, is there a way for me to have my name as the main account?

No.

Same query at same time, but different execution plans from two schemas

Hi!
We just had some performance problems in our production system and I would like to ask for some advice from you.
We had a select-query that was run from USER1 on SCHEMA1, and it ran a table scan on a huge table.
Using session browser in TOAD I copied the Sql-statement, logged on SCHEMA1 and ran the same query. I got a different execution plan where I avoided the table scan.
So my question is:
How is it possible that the same query get different execution plans when running in two different schemas at the same time.
Some more information:
The user USER1 runs "alter session set current_schema=SCHEMA1;" when it logs on. Besides that it doesn't do anything so session parameter values are the same for USER1 and SCHEMA1.
SCHEMA1 is the schema owning the tables.
ALL_ROWS is used for both USER1 and SCHEMA1
Our database:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
PL/SQL Release 9.2.0.8.0 - Production
CORE 9.2.0.8.0 Production
TNS for Linux: Version 9.2.0.8.0 - Production
NLSRTL Version 9.2.0.8.0 - Production
Anybody has some suggestions to why I experience different execution plan for the same query, run at the same time, but from different users?

Thanks for clarification of the schema structure.
What happens if instead of setting the current session schema to SCHEMA1, if you simply add the schema name to alle tables, views and other objects inside your select statement?
As in select * from schema1.dual;I know that this is not what you want eventually, but it might help to find any misleading objects.
Furthermore it is not clear what you meant with: "avoided a table scan".
Did you avoid a full table scan (FTS) or was the table completely removed from the execution plan?
Can you post both plans?
Edited by: Sven W. on Mar 30, 2010 5:27 PM

Is it possible to have an attachment within a pdf doc print at the same time the main doc prints?

Okay, so this may be kind of a weird question. We have some users who are wanting to add a page to an already existing xml document and correct me if I'm wrong, but I've read that it's not possible to add/delete pages from a pdf that's in xml format. Since that is not possible, I have added the page to the xml document as an attachment. Now what I am wanting to know is if it is possible to have the attachment print out at the same time as the main document. We are using the latest version of Adobe Reader and I have access to Adobe Acrobat Standard 9 & 10 and then I have access to Adobe Acrobat Pro 7. I've been unable to find anyting via google or by searching this forum so hopefully I'll draw out some kind of smart cookies and we'll get this figured out. I appreciate any and all input!
Thanks,

I know of no way to do this with Reader or XML.

HT1399 Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming. So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on. But the ipad is a different story. I have the music and artist but not one playlist I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this.
Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z. Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac. Which I do talk highly of all the time. But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
I have managed to get the Imac to fix this but for some reason the IOS devices do not. Any ideas?
Thanks Al

Is it possible to have same patch in different sets?

Similar Messages

Maybe you are looking for