Is it possible to have the Grid Server send an alert for blocking locks?

All,
We are deploying a new custom application. I'm the DBA. Our development team wants to be alerted if any processes in this new application are being blocked for more than 30 seconds. I believe that I can setup an notification from the Grid Control to alert me if more than 1 process is waiting but I'm not sure about the ability to alert when a blocking lock is occurring for more than a period of time.
Does anyone know if this is possible? Or , can anyone give me some points on how I might write a custom notification?
Thanks in advance.
John

OEM provides this metric out of the box though if you wanted to limit the check to a specific type of lock, or application you would have to write your own UDM (User Defined Metric) which is a trivial task. The minimum time interval is minutes but I assume you could use 0.25 minutes to check every 15 seconds, and be notified if it repeats twice (so this would be 2 repeated alarms over 30 seconds and match your criteria, correct?).
Check the documentation for creating a UDM if you choose to go that route.
Hope this helps.

Similar Messages

  • CSM Is it possible to have the vserver (VIP) IP in a different subnet range

    CSM - Is it possible to have the vserver (VIP) IP in a different subnet range than the real IP addresses in the serverfarm that is bound to it?
    In other words, as an example a typical bridge configuration is like this:
    vlan 221 client
    ip address 10.20.220.2 255.255.255.0
    gateway 10.20.220.1
    vlan 220 server
    ip address 10.20.220.2 255.255.255.0
    <<<<<<<<<<<<Two VLANs with the same IP address are bridged together>>>>>>>>>>>>>>>>>.
    serverfarm WEBFARM
    nat server
    no nat client
    real 10.20.220.10
    inservice
    real 10.20.220.20
    inservice
    vserver WEB
    virtual 10.20.220.100 tcp www
    serverfarm WEBFARM
    persistent rebalance
    inservice
    ==================================================================================
    NOW:
    =====
    Is it possible to do something like this:
    ==================================================================================
    vlan 221 client
    ip address 10.20.220.2 255.255.255.0
    gateway 10.20.220.1
    vlan 220 server
    ip address 10.20.220.2 255.255.255.0
    <<<<<<<<<<<<Two VLANs with the same IP address are bridged together>>>>>>>>>>>>>>>>>.
    serverfarm WEBFARM
    nat server
    no nat client
    real 10.20.220.10
    inservice
    real 10.20.220.20
    inservice
    vserver WEB
    virtual 50.40.220.99 tcp www <<<<<<<<<< Place the IP address in a different subnet than the IP's in the serverfarm >>>>>>>>>>>>>>>
    serverfarm WEBFARM
    persistent rebalance
    inservice
    <<<<<<<<On the MSFC place a static route to route the 50.40.220.99 address towards the CSM IP on vlan 221>>>>>>>>>.
    ip route 50.40.220.99 255.255.255.255 10.20.220.2
    Please if somebody knows if this is or is not possible it would be highly appreciated to hear your feedback.

    Pointers to examples - much appreciated.

  • Is it possible to administer the license server from a remote computer?

    NI VLM and the license server service are running on a license server machine. Company policy prevents me from having admin access to the machine (which seems necessary in order to run NI VLM). Is it possible to administer the license server service from a remote machine? i.e., can I install NI VLM on a machine that is not the license server, but connect to and manage the license server service over the network? I can access the license server via RDP, but without admin access, I can't get very far.
    Is there any other way to manage the VLM without admin access to the machine it is running on?
    Thanks,
    Chris

    Hey Chris,
    I haven't heard of a case where someone was able to administer licenses via VLM without having administrator access. Is there any possibility of getting administrator access on the license server machine, even if it's through some sort of temporary account?

  • Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

    Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

    No.
    OT

  • Is it possible to have the Firefox Icon in windows' taskbar flashes when any of my app tab changes?

    Is it possible to have the Firefox Icon in windows' taskbar flashes when any of my app tab changes?

    Not possible to configure this in Adobe Reader.

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

    Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

    Hi,
    Create a play list that you wish to burn. Select playlist, the file from main menu which gives to an option to burn the playlist. A pop up box appears allowing you to select burn speed and disc format.
    Jim

  • Is is possible to have the images as thumbnails and make it so you can click on them for a larger view and then click them again to have it go back to the original size? In an interactive pdf?

    I am designing an interactive catalog in a pdf. Is it possible to have the images as a thumbnail and then click them to enlarge the image and then click again to make them go back to the original size?
    Thank you in advance!
    Stephanie

    It can be done with Show/Hide buttons:
    Here's a button created from a small version of the image (notice that it's selected in the image below):
    The small button has a Show/Hide Buttons and Forms action. It's action is to make the Larger Image visible (eyeball turned on) with the small image hidden (eyeball turned off).
    The large image is also turned into a button (shown below):
    Notice the checkbox "Hidden Until Triggered". The large button is hidden until it's triggered by the small button. Clicking on the large image also causes a Show/Hide action which shows the Small button and hides the large button.

  • For any given Bookmarks folder, is it possible to have the subfolders appear *above* individual links?

    For any given Bookmarks folder, is it possible to have the subfolders all appear *above* the individual links (as they do in Internet Explorer), rather than mixed together alphabetically? (Or is there perhaps an add-on that will allow me to do this?)

    Provisional solution is to place one or more zeros in front of your folder names, that way they should always appear on top in their alphabetical order.

  • Is it possible to have the loudspeaker activate automatically during voice call?

    When answering and making voice calls, is it possible to have the loudspeaker activate automatically during the voice call? Is there any settings on the device which can be changed for this to happen?

    Thanks cor-el! I had tried that out, but was turned off by the different workflow (can't click Tab to select the address suggestions) and assumed by the look that I couldn't use my Smart Keywords for searches.
    In fact, the workflow isn't that much bulkier and the Location Bar is fully functional:
    * ''for a search: Ctrl+L, (Smart Keyword +) [search terms], Enter''
    * ''for a suggested address: Ctrl+L, Down, Enter, Enter''
    Still, it would be nice in future versions if:
    # the Location Bar could automatically open when opening a (blank) new tab (just as the cursor automatically goes to the Location Bar when a new tab is opened with the Navigation Toolbar showing) to avoid the Ctrl+L step of the workflow
    # the Tab, Enter workflow could be enabled for selecting address suggestions in the pop-up Location Bar
    Or (most simply in my mind):
    if '''the Navigation Toolbar could be set to show when a (blank) new tab is opened and disappear once an address/search is selected'''.

  • Is it possible to have the crop marks where you want when making a PDF?

    Is it possible to have the crop marks where you want when making a PDF?
    So if I have an Indesign document 84x55 with a 3mm bleed but I want a PDF from that document to crop at 85x55 (adding .5mm to the left and right of the PDF), the crop marks are offset by 3mm but I want the left and right crop to be .5mm out into the bleed and not at the document edge.
    Resizing the Indesign file is ruled out for the moment.
    Thanks, Tim

    The automatic crop marks will always indicate the trim size of the document as defined in Document Setup, so the simple answer is no. You will need to draw custom crop marks in the slug area. You can set the slug area my clicking More Options in Document Setup.
    This is a highly unusual request. The purpose of crop marks is to indicate the one and only trim area for the page. Why do you want crop marks that don’t match the document size?

  • Imput - Is it possible to have the same live edit result

    Is it possible to have the same live edit result with a xml
    fiel on client side than :
    http://www.peoplesdns.com/ajax/?edit=2
    Thank for your reply.

    No.
    OT

  • How can i confirm that i have the grid control ?

    Hi,
    I have oracle 10g database , we have dbconsole. But i don't know wherther we have the grid control or not ??? how can i check that ??
    And one more thing , i have the oracle 817 databases , in need to register that database into the GRID . Can any one send me the proper doc. for 817 to install into grid control db.
    $ emctl status dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
    Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
    http://prodgv1:1158/em/console/aboutApplication
    Oracle Enterprise Manager 10g is running.
    Logs are generated in

    I have oracle 10g database , we have dbconsole. But i
    don't know wherther we have the grid control or not
    ??? how can i check that ?? What are you looking for exactly? What does "do we have the grid control" mean?
    Did you download and install this?
    A "default" install comes with three Oracle homes, with directories db10g, oms10g and agent10g in the 'basedir'. Kinda hard to miss...
    With proper environment setup, you could try
    $ emctl status oms
    To manage Targets (as called in EM terms), you would install a Management Agent on each host to start monitoring hosts, listeners, databases, application servers, oc4j instances, and other types of targets. You "add hosts" via addition of agents.
    And one more thing , i have the oracle 817 databases
    , in need to register that database into the GRID .
    Can any one send me the proper doc. for 817 to
    install into grid control db.No need to send anything, the documentation is available here on OTN (look in the top menu "shortcuts", Documentation -> Enterprise Manager).
    There are several options (version dependent of course) available for deploying agents. But you need a OMS + Repository first.
    Further discussion probably belongs in the dedicated Enterprise Manager.
    Message was edited by:
    orafad

  • I have a problem in the liquefaction of confidentiality and answers when asked to reset the answers but remembered email added halted from by Microsoft Corporation, Is it possible to cancel the account and send the answers added on my email and thank you

    Dear,s
    I have a problem in the liquefaction of confidentiality and answers when asked to reset the answers but remembered email added halted from by Microsoft Corporation, Is it possible to cancel the account and send the answers added on my email:
    <Email Edited by Host>
    Thanks

    You are not addressing Apple here. And your post is a bit confusing. See Klaus's answer in this thread:
    https://discussions.apple.com/thread/5228474?tstart=0

  • Is it possible to have the camera lens replaced?

    Some how my camera lens has gotten scratched up, so now every time I take a picture it comes out blurry. Is it possible to have the lens replaced? Has anyone ever had that done?

    I don't believe Apple does this.  They will exchange your phone under an out of warranty exchange for $149

Maybe you are looking for

  • How can I pair with Apple TV without going to set up on Apple TV?

    How can I pair with Apple TV without going to set up on Apple TV?

  • More Guru Winners for February 2015 in the Power Pivot category and many others!

    It's been a busy week that also saw the TECHNET WIKI SUMMIT 2015 Then we had the results for February's TechNet Guru competition ALSO posted! http://blogs.technet.com/b/wikininjas/archive/2015/03/19/technet-guru-february-2015.aspx Below is a summary

  • Clicking noise from back-ups

    Since replacing my G5 with a new mac mini I hear frequent clicking noises from the APC Back-UPS that I have it plugged into. The only obvious difference is that the mini has an ungrounded two-prong plug while the G5 had a grounded three-prong plug. T

  • Installing and uninstalling Quick time

    I am trying to install quick time and every time I get this message '' The installer encountered errors before requested operations for quicktime could be completed, retry later. '' I have quick time in my add / remove programs so I try to delete but

  • T400 / T410 Compatibility Question

    Other than the obvious specification differences, what are the effective differences between the T400 and the T410? The reason I want to know is that for several years I have been using a T60 at work with a T60 at home.  I run the OS from the hard dr