Is it possible to have the internal timebase as an output signal on a analog out chan in NI 6251
It's all.... thanks!
Hi! It is possible!
If you look in MAX your device's routes (open device and interfaces, select your board and choose the "Device Route" tab on the right part of the screen) you'll find all direct connections between terminals (green ones) and indirect connection (hovering your mouse on the cell that connects your source and your destination you'll see the sub-system used to route the signal).
With this being said, using labview you can create a new connection with "DAQmx Connect Terminals.vi" (all functions-->Ni Measurement-->DAQmx-->DAQmx Advanced-->DAQmx Signal Routing), using C functions you can call DAQmxConnectTerms ( int32 DAQmxConnectTerms (const char sourceTerminal[], const char destinationTerminal[], int32 signalModifiers) ).
Hope this helps
Ciao.
NicolaC
National Instruments
Attachments:
connect.JPG 47 KB
Similar Messages
-
I've lost the use of Appleworks by upgrading to 10.9.2.
Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and few other applications that aren't available on OS 10.9.2.
Any suggestions?
Thank you for your help.Hello again, WZZZ,
Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
Some thoughts:
• The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
• The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
• If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
So, all in all a good project that got me where I wanted to go. Thank you for your help.
Appreciatively,
wallah -
Is it possible to upgrade the internal Hard disk drive on the iMac
Is it possible to upgrade the internal Hard disk drive on the iMac?
Yes but it's definitely not advised. If you have a machine newer than 2009 Apple uses drives that have integrated heat sensors. This makes upgrading much more difficult but not impossible. If you have a machine still under warranty then definitely DO NOT do this yourself as you may void the warranty not to mention it isn't for the faint of heart. Take the machine to an AASP to have the work done, you will need to find one in your area willing to do so.
If you are considering a new machine then simply buy the configuation you need. -
I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?
Settings>General>Accessibility>(scroll down to)AssitiveTouch and change to Off
-
Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.
No.
OT -
Is it possible to have the Firefox Icon in windows' taskbar flashes when any of my app tab changes?
Not possible to configure this in Adobe Reader.
-
I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found
You have to go to autherized iPhone agent.
-
Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?
Hi,
Create a play list that you wish to burn. Select playlist, the file from main menu which gives to an option to burn the playlist. A pop up box appears allowing you to select burn speed and disc format.
Jim -
I am designing an interactive catalog in a pdf. Is it possible to have the images as a thumbnail and then click them to enlarge the image and then click again to make them go back to the original size?
Thank you in advance!
StephanieIt can be done with Show/Hide buttons:
Here's a button created from a small version of the image (notice that it's selected in the image below):
The small button has a Show/Hide Buttons and Forms action. It's action is to make the Larger Image visible (eyeball turned on) with the small image hidden (eyeball turned off).
The large image is also turned into a button (shown below):
Notice the checkbox "Hidden Until Triggered". The large button is hidden until it's triggered by the small button. Clicking on the large image also causes a Show/Hide action which shows the Small button and hides the large button. -
For any given Bookmarks folder, is it possible to have the subfolders all appear *above* the individual links (as they do in Internet Explorer), rather than mixed together alphabetically? (Or is there perhaps an add-on that will allow me to do this?)
Provisional solution is to place one or more zeros in front of your folder names, that way they should always appear on top in their alphabetical order.
-
Is it possible to have the loudspeaker activate automatically during voice call?
When answering and making voice calls, is it possible to have the loudspeaker activate automatically during the voice call? Is there any settings on the device which can be changed for this to happen?
Thanks cor-el! I had tried that out, but was turned off by the different workflow (can't click Tab to select the address suggestions) and assumed by the look that I couldn't use my Smart Keywords for searches.
In fact, the workflow isn't that much bulkier and the Location Bar is fully functional:
* ''for a search: Ctrl+L, (Smart Keyword +) [search terms], Enter''
* ''for a suggested address: Ctrl+L, Down, Enter, Enter''
Still, it would be nice in future versions if:
# the Location Bar could automatically open when opening a (blank) new tab (just as the cursor automatically goes to the Location Bar when a new tab is opened with the Navigation Toolbar showing) to avoid the Ctrl+L step of the workflow
# the Tab, Enter workflow could be enabled for selecting address suggestions in the pop-up Location Bar
Or (most simply in my mind):
if '''the Navigation Toolbar could be set to show when a (blank) new tab is opened and disappear once an address/search is selected'''. -
Is it possible to have the crop marks where you want when making a PDF?
Is it possible to have the crop marks where you want when making a PDF?
So if I have an Indesign document 84x55 with a 3mm bleed but I want a PDF from that document to crop at 85x55 (adding .5mm to the left and right of the PDF), the crop marks are offset by 3mm but I want the left and right crop to be .5mm out into the bleed and not at the document edge.
Resizing the Indesign file is ruled out for the moment.
Thanks, TimThe automatic crop marks will always indicate the trim size of the document as defined in Document Setup, so the simple answer is no. You will need to draw custom crop marks in the slug area. You can set the slug area my clicking More Options in Document Setup.
This is a highly unusual request. The purpose of crop marks is to indicate the one and only trim area for the page. Why do you want crop marks that don’t match the document size? -
Imput - Is it possible to have the same live edit result
Is it possible to have the same live edit result with a xml
fiel on client side than :
http://www.peoplesdns.com/ajax/?edit=2
Thank for your reply.No.
OT -
Is it possible to replace the internal wifi antenna in a itouch 1st gen with a much stronger internal wifi antenna from a slightly newer model, such as a 2nd or 3rd generation itouch?
That is not very likely as the antennae are different physical designs and fit will be an issue.
-
Is it possible to have the camera lens replaced?
Some how my camera lens has gotten scratched up, so now every time I take a picture it comes out blurry. Is it possible to have the lens replaced? Has anyone ever had that done?
I don't believe Apple does this. They will exchange your phone under an out of warranty exchange for $149
Maybe you are looking for
-
Firefox 29 "Customize Page" doesn't fit on screen.
Can't see anything along the right side of the Customize Page. At least 20% of the page is missing. Tried to change zoom and font size.
-
Problem with File RFC File scenario without using BPM
Hi all, I am trying a File RFC File scenario without using BPM with the help of the following thread: File - RFC - File without a BPM - Possible from SP 19. The XI system is PI 7.0 sp 12. When I am trying to acheive the above scenario, I am getti
-
Can i Sync my Sony Ericsson P990 to my Macbook
I have searched the web and saw that the model isn´t supported by the system. is there any way that i can connect it??? i really need to ... So is apple going to update isync for new mobile phones soon???? please help me.... i am a really new user i
-
I'm creating a pdf in Bridge and it becomes washed out once saved. I've tried sRGB color space as well as Adobe 1998. Both are washed out. Does anybody have a solution to this issue?
-
IPod Classic to iMac photo transfer
Laptop died, lost everything. However, my old iPod Classic (click wheel 120GB) still had all of my old photos on it. I have an iMac now and am trying to transfer the photos over. Any good (hopefully free, although not opposed to buying) transfer soft