Is it possible to have the server always on?
I own a Time Capsule which I stream my iTunes library from to my computer as its hard disk is almost full. It isn't a great solution, but it is working for now. However, because the songs are on the wireless drive, iTunes must connect to the server before retrieving the songs. This gets annoying when I plug in my iPhone because it says that none of the songs were copied because they could not be found. Is it possible for the server to always be connected to the computer and not disconnect after a backup has been made?
Open System Preferences and select Accounts.
Select your account and click on the Log In tab.
Then click the + (plus) button to navigate to your Time Capsule. Click it to highlight it and click Add at the lower right of the pane.
Restart your computer and the Time Capsule will be up and running.
Similar Messages
-
For any given Bookmarks folder, is it possible to have the subfolders all appear *above* the individual links (as they do in Internet Explorer), rather than mixed together alphabetically? (Or is there perhaps an add-on that will allow me to do this?)
Provisional solution is to place one or more zeros in front of your folder names, that way they should always appear on top in their alphabetical order.
-
Is it possible to have the crop marks where you want when making a PDF?
Is it possible to have the crop marks where you want when making a PDF?
So if I have an Indesign document 84x55 with a 3mm bleed but I want a PDF from that document to crop at 85x55 (adding .5mm to the left and right of the PDF), the crop marks are offset by 3mm but I want the left and right crop to be .5mm out into the bleed and not at the document edge.
Resizing the Indesign file is ruled out for the moment.
Thanks, TimThe automatic crop marks will always indicate the trim size of the document as defined in Document Setup, so the simple answer is no. You will need to draw custom crop marks in the slug area. You can set the slug area my clicking More Options in Document Setup.
This is a highly unusual request. The purpose of crop marks is to indicate the one and only trim area for the page. Why do you want crop marks that don’t match the document size? -
Is it possible to have a server with both a 2007 DP role and 2012 DP role?
Is it possible to have a server with both a 2007 DP role and 2012 DP?
A client has been sold that as part of the migration the vendor will continue use the existing 2007 servers as DPs, and add the 2012 DP role as part of the migration - then at some future point remove the 2007 role.
Sounds a bit wonky to me, it would be great to have your insights, some MS documentation or case study - to either provide a level of comfort or give me some foundation to chime in and request they adjust their expectations... I haven't found anything yet.
It's not side by side technically, more of concurrent migration?
Thank's for your insights.Shared DPs are available if you are performing a migration but that's about it.
https://social.technet.microsoft.com/Forums/en-US/5185f83d-af0b-47a2-a6e9-5940a2cef7e2/can-sccm-2012-dp-and-sccm-2007-distribution-point-share-a-server-without-migrating?forum=configmanagergeneral
http://windowsitpro.com/system-center/q-can-i-share-distribution-point-between-configuration-manager-2007-and-configuration-
http://blogs.technet.com/b/system_center_in_action/archive/2012/04/26/distribution-point-migration-from-configuration-manager-2007-using-the-migration-feature-of-system-center-2012-configuration-manager.aspx
-Nick O. -
Is it possible to have the Find My iPhone function on a PC. I have this app running well on all my OS devices. Just wondering if I can locate my OS devices from an "app" on my PC.
I do not believe there's an app for that on PC. I do recommend getting the iCloud dashboard for PC and to try it there. I would myself if my PC was working.
PC ***** get a Mac.
You can always go to iCloud.com to find your phone. -
CSM Is it possible to have the vserver (VIP) IP in a different subnet range
CSM - Is it possible to have the vserver (VIP) IP in a different subnet range than the real IP addresses in the serverfarm that is bound to it?
In other words, as an example a typical bridge configuration is like this:
vlan 221 client
ip address 10.20.220.2 255.255.255.0
gateway 10.20.220.1
vlan 220 server
ip address 10.20.220.2 255.255.255.0
<<<<<<<<<<<<Two VLANs with the same IP address are bridged together>>>>>>>>>>>>>>>>>.
serverfarm WEBFARM
nat server
no nat client
real 10.20.220.10
inservice
real 10.20.220.20
inservice
vserver WEB
virtual 10.20.220.100 tcp www
serverfarm WEBFARM
persistent rebalance
inservice
==================================================================================
NOW:
=====
Is it possible to do something like this:
==================================================================================
vlan 221 client
ip address 10.20.220.2 255.255.255.0
gateway 10.20.220.1
vlan 220 server
ip address 10.20.220.2 255.255.255.0
<<<<<<<<<<<<Two VLANs with the same IP address are bridged together>>>>>>>>>>>>>>>>>.
serverfarm WEBFARM
nat server
no nat client
real 10.20.220.10
inservice
real 10.20.220.20
inservice
vserver WEB
virtual 50.40.220.99 tcp www <<<<<<<<<< Place the IP address in a different subnet than the IP's in the serverfarm >>>>>>>>>>>>>>>
serverfarm WEBFARM
persistent rebalance
inservice
<<<<<<<<On the MSFC place a static route to route the 50.40.220.99 address towards the CSM IP on vlan 221>>>>>>>>>.
ip route 50.40.220.99 255.255.255.255 10.20.220.2
Please if somebody knows if this is or is not possible it would be highly appreciated to hear your feedback.Pointers to examples - much appreciated.
-
Is it possible to have the flash document background transparent?
Hi all,
i was wondering if it was possible to have the background
colour of the document not an image as transparent there is no
option to select transparent from the colour selector so i asume it
cannot be done, however you guys always seem to amaze me with your
knowledge lol, i want it transparent so if i ever change the colour
of my site i wont need to change every button on it,
www.kernow-connect.com
any help would be great
thanks in advance
LukeTry this
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
width="184" height="68" title="Nike ID">
<param name="movie" value="../Newer Buttons/Clothing/Nike
ID/Nike ID.swf" />
<param name="quality" value="high" />
<param name="wmode" value="transparent" />
<embed src="../Newer Buttons/Clothing/Nike ID/Nike
ID.swf" quality="high" pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="184" height="68"
wmode="transparent"></embed>
</object> -
Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.
No.
OT -
Is it possible to have the Firefox Icon in windows' taskbar flashes when any of my app tab changes?
Not possible to configure this in Adobe Reader.
-
I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found
You have to go to autherized iPhone agent.
-
Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?
Hi,
Create a play list that you wish to burn. Select playlist, the file from main menu which gives to an option to burn the playlist. A pop up box appears allowing you to select burn speed and disc format.
Jim -
I am designing an interactive catalog in a pdf. Is it possible to have the images as a thumbnail and then click them to enlarge the image and then click again to make them go back to the original size?
Thank you in advance!
StephanieIt can be done with Show/Hide buttons:
Here's a button created from a small version of the image (notice that it's selected in the image below):
The small button has a Show/Hide Buttons and Forms action. It's action is to make the Larger Image visible (eyeball turned on) with the small image hidden (eyeball turned off).
The large image is also turned into a button (shown below):
Notice the checkbox "Hidden Until Triggered". The large button is hidden until it's triggered by the small button. Clicking on the large image also causes a Show/Hide action which shows the Small button and hides the large button. -
Is it possible to have the loudspeaker activate automatically during voice call?
When answering and making voice calls, is it possible to have the loudspeaker activate automatically during the voice call? Is there any settings on the device which can be changed for this to happen?
Thanks cor-el! I had tried that out, but was turned off by the different workflow (can't click Tab to select the address suggestions) and assumed by the look that I couldn't use my Smart Keywords for searches.
In fact, the workflow isn't that much bulkier and the Location Bar is fully functional:
* ''for a search: Ctrl+L, (Smart Keyword +) [search terms], Enter''
* ''for a suggested address: Ctrl+L, Down, Enter, Enter''
Still, it would be nice in future versions if:
# the Location Bar could automatically open when opening a (blank) new tab (just as the cursor automatically goes to the Location Bar when a new tab is opened with the Navigation Toolbar showing) to avoid the Ctrl+L step of the workflow
# the Tab, Enter workflow could be enabled for selecting address suggestions in the pop-up Location Bar
Or (most simply in my mind):
if '''the Navigation Toolbar could be set to show when a (blank) new tab is opened and disappear once an address/search is selected'''. -
Imput - Is it possible to have the same live edit result
Is it possible to have the same live edit result with a xml
fiel on client side than :
http://www.peoplesdns.com/ajax/?edit=2
Thank for your reply.No.
OT -
Is it possible to have the camera lens replaced?
Some how my camera lens has gotten scratched up, so now every time I take a picture it comes out blurry. Is it possible to have the lens replaced? Has anyone ever had that done?
I don't believe Apple does this. They will exchange your phone under an out of warranty exchange for $149
Maybe you are looking for
-
Airport Express in hotels?
It used to be that my airport express had no problems connecting to hotel ethernet systems. 90% of the time, it connected and let me set up a local network. For the past 4 months, 0% of the time it has allowed that (maybe 8 different hotels). Has som
-
Reading foreign language text messages
Hi all, There may be a very simple solution to this but I just don't know how to make it work. My wife and I both have Nokia's 6110 and 6210 (both Navigators) bought in Australia, so naturally we have set our phones in English. Occasionally, we
-
Db recovery...
Hi Gurus, Just to get a suggestion....suppose i got the following messege while starting the database(10.2.0) ORA-00205: error in identifying controlfile, check alert log for more info ORA-00202: controlfile: '/u02/oradata/test/control01.ctl' ORA-270
-
I set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection refused'. Can any one suggest a solution
-
Hi, DATA: l_s_range TYPE rsr_s_rangesid, loc_var_range LIKE rrrangeexit, zpl TYPE char4. IF i_step = 2. CASE i_vnam. WHEN 'ZPLANT'. LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZV_TXT1'. CLEAR: l_s_range. zpl = loc_v