Is it possible to have the synthesizer interfaces for the included LOGIC PRO synths in MainsStage as a standalone?

I recently purchased MainStage as they included the instruments from Logic Pro and In the help files it shows the LOGIC synths with the nice GUIs for each included synth; but it seems you have to recreate all of the parameter controls for each synth if using only MainStage as I can not find how to view the synthesizer interfaces.  Does anyone know if this is the case or is there a way to tweak the synths using the nice already layed-out interfaces that are in Logic?

Hi
Locate the Instrument plugin in the Instrument Channel Strip and double click to open the plugin GUI
CCT

Similar Messages

  • Is it possible to have two USB drives for the IPad?  I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive.  One of my cameras does not use an SD card.  How can I do this?

    Is it possible to have two USB drives for the IPad?  I want to bring RAW files from my camera through the IPad and out to an external hard drive.  One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line.  Realted to this, I bought the IPad camera accessory.  Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive?  Can I put Lightroom or the Nikon photo editing software on the IPad?  Right now I carry a PC laptop and external hard drives with me on wildernes trips.  Internet and WiFi are not available.  Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad).  I have Nikon NX software and lightroom on my PC.  I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips.  Is this possible and how would I do it?  I'd appreciate any guidance.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • Is it possible to have Different Interval Ranges for the same Doc Type

    Dear All,
    Here is the issue.Is it possible to have different interval ranges for the same document type according to certain condition.Like my client , wants his interval ranges  be divided according to region(which are many)
    Regards,
    Sameer Jalees

    Hello,
    As you know we can only assign one number range for External and one number range group for internal in the sales document type.
    If you want different number ranges based on the regions, then as Jignesh suggested, you need to go for an enhancement.
    Use the exit USEREXIT_NUMBER_RANGE in program MVA45AFZZ, include a Z table with region as a critera and number range group for different numbers based on the regions. Talk to the business and get more details, get the help of ABAP team for technical details.
    Regards,
    SAM

  • How do I set up the port interface for the WAN side of my RVS4000 to 100T Full Duplex?

    How do I set up the port interface for the WAN side of my RVS4000? The ISP says I need to set it to 100T Full Duplex, but where would I do that? In the Router's administration GUI I can't find any options to make such settings for the WAN side.

    The setup of the folders in Finder is entirely up to you. Whatever suits your needs is what you should do. Lightroom will be fine no matter how you set it up.
    So I'm not really sure what your question is.

  • I do not see the user interface for the Logic software instruments. I can hear them play through my midi keyboard but I cannot see them to adjust parameters. Please advise.

    I do not see the user interface for the Logic Pro software instruments. I can hear them play through my midi keyboard but cannot see them to adjust the parameters. Please advise.

    Couple of things - you can open the interface for any instrument or plug-in by double-clicking its insert slot on the channel strip. You can configure Logic to automatically open the interface for a plug-in when you first instantiate it in the preferences. Go to Logic Pro > Preferences > Display > Mixer, and check the box for "Open plug-in window on insertion".

  • Is it possible to have  2 different account for the developer program?

    Dear All,
    I would like to Know if I can have two different account for the Developer program?
    I am signed in as developer for my company, but I would also like to have my private account to pubblish my private stuff.
    DO you Know if it's possible?

    Those should be considered two separate/different accounts, so yes, you can do that. It's just money at that point

  • Is it possible to have two app icons for the same app?

    I work with Assistive Technologies that enable people with various disabilites to use computing devices, such as the iPad.  Some people do not have the fine motor skills to precisely tap the intended app icon.  If I had a page full of app icons that launched the same app then I might have a workaround.
    Thanks in advance,
    Mike Leary    
    Information Technology Specialist
    The Rural Institute - MonTECH
    The University of Montana - Missoula

    Mike,
    At the moment, no. The app store won't let you re-download an app already installed, and they all come in single icons.
    The accessibility settings enable a zoom feature, but if your clients have difficulty tapping an app, they may have issues using three fingers simultaneously to zoom in/out.
    There is a voice ability, but I've just spent the last 10 minutes playing with it and successfully called everyone in my phonebook (And i only wanted to open iBooks)
    If you turn the iPad landscape you still have the same amount of apps on the page, just spaced out a little more, giving more margin for error/ But this still requires the same 'touch space area'  to activate the app.
    This might be something Apple could look at, with pressure from users such as yourself and your clients.
    Hope this helps, even though it;s not really a solution

  • Is it possible to have two SCCM instances for the same domain

    Hello - I'm the IT Project Manager for an organization that has a single domain-production.
    In here, we have an instance of SCCM 2012 setup. This instance is used to build packages, images, testing, validations, modifications etc. as well as for production roll outs. The primary issues we have with this is there is no separation between test and
    prod, also, there are several packages, task sequences etc causing confusion in determining which is a test package and which is prod.
    Setting up a test domain does not seem to be a viable option for us, at least for now.
    So, my question is, can we have another instance of SCCM in the same domain that we can restrict only for the sake of testing & validations and then use the original one to deploy the tested (gold) packets.
    Just a thought!! Does it make sense? Any challenges that we could face?
    Thanks in advance 
    Jagan Pantina
    JP

    Hi,
    Yes you can no problem, you should avoid having Boundary / Boundary Groups used for Site Assignment that overlap and make sure that PXE request to the test/dev environment is restricted to one test subnet to avoid co-existance issues.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Is it possible to have a black backgound for the Time & Battery screensaver

    I purchased my 3rd generation iPod in mid-November and I love, love, love it! However, my co-worker got one for Christmas and I noticed while checking it out that the screensaver that displays the time and battery life has a black background with white lettering while mine is opposite! I would rather have black and she'd prefer white... is there anyway to change them? Is her's a newer version of software that mine hasn't been updated to yet? I haven't found any answers in the forums... thanks!!

    Sorry, I don't know the answer but I have a related question: what if you don't want that screensaver at all? I don't care how much time is left on my battery, but I sure like looking at my iPod to tell the time or see what song is playing. The default behavior for my new ipod is to hide this much-more-valuable information, which is lame. Any way to change it back to the old behavior?
    Thanks!
    Bob

  • Which Interface on a router is the bound interface for the crypto pki authenticate and enroll

    I have a few routers in the field that are using a broadband connection for backup. We have set up our own private PKI using the IOS CA. I need to add another IOS CA to the configuration. The problem is I need to know what interface is bound to the crypto pki authenticate and enroll process for me to ensure the CA (public IP) is reachable (having to deal with NATs, various public IPs on the router, Ironport, etc). Can I specify the particular interface bound to authenticate and enroll?
    Thanks.

    Hi Ramanan,
    NCM and DeviceExpert as basically the same. DeviceExpert is the stand alone version and NCM is the Plug-In for ManageEngine OpManager which allows a tight integration between the products.
    As far as I know, the product can alert on device level changes but interface specific changes are not available in real time. This can be tracked through complaince reports which have to be generated manually. As for link up and down status, OpManager can do this.
    I guess a combination of OpManager and NCM will let you achieve your needs to a certain exend except for maybe the change in ifindex values and alert for interface specific changes. Then again, for ifindex values, giving the ifindex persist command should avoid any changes. Not sure if that is a workaround or unusable idea.
    Regards,
    Don

  • How to find device neighbors from the asdm interface for the pix

    I am able to get to my pix using the asdm, I looked around the interface did not see where it can show me other cisco devices on the network? trying to get my topology going. I am thinking it should be on there somewhere just like on the router there is a show neighbor command. 

    Cisco firewalls do not do CDP if that is what you are looking for.
    If this is eigrp or ospf neighbor then, you can do that via CLI.
    Once you telnet or ssh to the firewall you can issue "sh eigrp nei" or "sh ospf nei"
    -Kureli

  • User interface for the CAF project

    hi
                 to make  user interface for the CAF  i  have  written  a simple 
      webservice application for storing the data in the database using JDBC operation
       i have  imported the webservice in the  EXTERNAL SERVICE  and  mapped
      in the required in the entity service  , every thing worked fine  but  when  i have
      imported the model  for developing the USER INTERFACE  for the  webservice
       there is no  EXECUTABLE NODE 
          can  anyone provide a clear idea  how i can proceed further .

    Couple of things - you can open the interface for any instrument or plug-in by double-clicking its insert slot on the channel strip. You can configure Logic to automatically open the interface for a plug-in when you first instantiate it in the preferences. Go to Logic Pro > Preferences > Display > Mixer, and check the box for "Open plug-in window on insertion".

  • Is it possible in IOS to have two static routes for the same subnet, one a higher priority and "failover" between the 2?

    Hi All
    Is it possible in IOS to have for a particular subnet:
    a) Two static routes?
    b) Make one static route a higher priority than the other?
    c) If one static router "goes down", failover to the lower priority static route?
    We have a l2tp/vpdn connection to a supplier which can be accessed via two vlans/routes. I would like to make one route the preferred one but the "route" to failover if the preferred route goes down.
    Again, many thanks in advance for all responses!
    Thanks
    John

    Hi John,
    Hope the below explaination will help you...
    R1(config)# ip route 0.0.0.0 0.0.0.0 2.2.2.2
    R1(config)# ip route 0.0.0.0 0.0.0.0 3.3.3.3 10
    If you notice the Administrative Distance for the secondary route pointing to ISP2 is increased to 10 so that it becomes the backup link.
    The above configuration with just two floating static routes partially accomplishes our requirement as it will work only in the scenario where the routers interfaces connected to the WAN link are in up/down or down/down status. But in a lot of situations we see that even though the links remain up but we are not able to reach the gateway, this usually happens when the issue is at the ISP side.
    In such scenarios, IP SLAs becomes an engineer's best friend. With around six additional IOS commands we can have a more reliable automatic failover environment.
    Using IP SLA the Cisco IOS gets the ability to use Internet Control Message Protocol (ICMP) pings to identify when a WAN link goes down at the remote end and hence allows the initiation of a backup connection from an alternative port. The Reliable Static Routing Backup using Object Tracking feature can ensure reliable backup in the case of several catastrophic events, such as Internet circuit failure or peer device failure.
    IP SLA is configured to ping a target, such as a publicly routable IP address or a target inside the corporate network or your next-hop IP on the ISP's router. The pings are routed from the primary interface only. Following a sample configuration of IP SLA to generate icmp ping targeted at the ISP1s next-hop IP.
    R1(config)# ip sla 1
    R1(config)# icmp-echo 2.2.2.2 source-interface FastEthernet0/0
    R1(config)# timeout 1000
    R1(config)# threshold 2
    R1(config)# frequency 3
    R1(config)# ip sla schedule 1 life forever start-time now
    The above configuration defines and starts an IP SLA probe.
    The ICMP Echo probe sends an ICMP Echo packet to next-hop IP 2.2.2.2 every 3 seconds, as defined by the “frequency” parameter.
    Timeout sets the amount of time (in milliseconds) for which the Cisco IOS IP SLAs operation waits for a response from its request packet.
    Threshold sets the rising threshold that generates a reaction event and stores history information for the Cisco IOS IP SLAs operation.
    After defining the IP SLA operation our next step is to define an object that tracks the SLA probe. This can be accomplished by using the IOS Track Object as shown below:
    R1(config)# track 1 ip sla 1 reachability
    The above command will track the state of the IP SLA operation. If there are no ping responses from the next-hop IP the track will go down and it will come up when the ip sla operation starts receiving ping response.
    To verify the track status use the use the “show track” command as shown below:
    R1# show track
    Track 1
    IP SLA 1 reachability
    Reachability is Down
    1 change, last change 00:03:19
    Latest operation return code: Unknown
    The above output shows that the track status is down. Every IP SLAs operation maintains an operation return-code value. This return code is interpreted by the tracking process. The return code may return OK, OverThreshold, and several other return codes.
    Different operations may have different return-code values, so only values common to all operation types are used. The below table shows the track states as per the IP SLA return code.
    Tracking
    Return Code
    Track State
    Reachability
    OK or over threshold
    (all other return codes)
    Up
    Down
    The Last step in the IP SLA Reliable Static Route configuration is to add the “track” statement to the default routes pointing to the ISP routers as shown below:
    R1(config)# ip route 0.0.0.0 0.0.0.0 2.2.2.2 track 1
    R1(config)# ip route 0.0.0.0 0.0.0.0 3.3.3.3 10
    The track number keyword and argument combination specifies that the static route will be installed only if the state of the configured track object is up. Hence if the track status is down the secondary route will be used to forward all the traffic.
    Please rate the helpfull posts.
    Regards,
    Naidu.

  • Is it possible to have two DADs that access the same database?????

    Hello,
    Is it possible to have two DADs that access the same database?
    One DAD would be password protected with Authentication mode Per Package and the other DAD would not require a password/login
    If it is possible can you also give suggestions about how to do this
    Thanks
    Doug

    I HAD THE SAME PROBLEM WITH SHARING MY LIBRARY WITH MY SON. WHAT I DID WIAS CREATED A LIBRARY FOR HIS USE ONLY. IN ITUNES CLICK--FILE--NEW PLAYLIST AND THIS SHOULD ADD AN UNTILED PLAY LIST IN YOUR SIDE BAR. CLICK ON IT AND RENAME IT. HE CAN KEEP ALL OF HIS MUSIC IN THIS LIBRARY. SELECT ALL OF HIS MUSIC FROM YOUR LIBRARY AND DRAG IT INTO HIS. ONCE THIS IS DONE YOU CAN THEN REMOVE HIS SONS FROM YOU PLAY LIST. MAKE SURE YOU ONE REMOVE IT FROM YOUR PLAY LIST AND NOT DELETE THE FILE.
    HOPE THIS HELPS
    G4   Mac OS X (10.3.9)  

  • I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and I find it very annoying.

    I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?

    . Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
    Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
    See:                  Keywords or ratings are applied only to one of the selected images - why?
    Uncheck the little square button with the "1".

Maybe you are looking for