Is it possible to hear yourself on the mic in real time?

i know some recording devices that do this. when you make a noise into the mic, the sound goes right into your headphones. i figure it would be useful if i could do that, but i'm not sure if i can on garageband. if i can, please let me know.
thanks again

http://www.bulletsandbones.com/GB/GBFAQ.html#monitoron
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

  • I have problem with my mic when i make call the others cannot hear me but the mic is ok

    i have problem with my mic when i make call the others cannot hear me but the mic is ok i checked it out and it works dont know what to do help me !!

    Hello Sabbir Khan,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Can't hear through the receiver or through speaker, and can't be heard
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Best of luck,
    Mario

  • Desing requriment for processing the IDOC in real time

    hi Gurus,
    we have a requirement to design for processing the IDOC in real time i.e.all the IDOC must be store and process for give time line with out using BPPM tool.we have suggested to use cache storage or storing the files in file adapter.
    please suggested good process with out compromising the Performance of PI.
    regards
    shankar

    hi Raj,
    Please find the example below for your reference
    let say
    System A-->PI--
    >system B
    system A sends multiple files based on time(daily or weekly) and real time( as an when the record created) to systerm B (CRM) in the form of IDOC Via. PI
    we needs to club the real time files and send it to system B.How best we can do without using BPM.
    regards
    shankar

  • How can I find the minimum in real time

    I 'am doing some type of sensing mechanism. I that the data is step count versus intensity. So I want to record the minimum in real time from. Please kindly help

    Hi perumpadapu,
    you should have learned by now to provide some meaningful example (data)…
    There are functions to detect minima: ArrayMinMax, "smaller than" comparison, PtByPtArrayMinMax, MinMax comparison, ...
    It all depends on your data!
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Is it possible to remotely start an exectutable/application on Real-Time target?

    Hi All,
    Apologies if this is an obvious question - I could not get an applicable answer using any search terms I could think of - and I am quite new to Real-Time programming.
    Is it possible to launch a headless real-time .exe (or uncompiled application saved on the RT machine) using an input from a remote VI - an .exe running on a Windows based laptop for example. I am currently building an application where my Windows based GUI communicates with the RT machine using shared variables. However I would soon like to hand my code over to a colleague who is going to test the application.I seem to recall that a .exe can be saved in a specific folder on the RT machine such that it will launch on start-up. However I would prefer to store multiple .exe's on the machine and allow my colleague to choose which one to launch.
    My first thought is to write a wrapper .exe (which will autolaunch) which can then launch any other .exe saved on the machine using the wrapper. However I would much prefer to launch the .exes directly and one at a time if possible - it seems a more elegant solution.
    Kind regards and thanks,
    Dave
    Solved!
    Go to Solution.

    Well there is certainly a way to do it but NI does not expose that method.  You can however programmatically reboot a RT target and also you can use the FTP vi's to rename the 'startup.rtexe' file that will autorun on reboot.  Good Luck!

  • Need to monitor any file change in the system, in real time

    Hi,
    I am running a program that I suspect may be doing changes in the filesystem, but I do not know which ones. I would like to know if there is a daemon/program that could help me monitor those changes. I tried AIDE, however, it works by creating a database of checksums for each file and does not report in real time potential changes. I would rather use a program that logs changes and timestamp them. Furthermore, AIDE is not useable with /var files, since there are many of them and they change so often. Is there another good solution?
    Alternatively I would like to run the program with monitoring. For instance, run the process as:
    monitor_program my_program_to_monitor logfile
    This would dump in logfile what my_program_to_monitor does to the filesystem.
    Thanks in advance.
    Last edited by zebulon (2011-08-24 15:44:10)

    no, at least with inotifywait, it is not possible. once you know what file is being changed you can use "lsof" to see what process have opened that file.
    i tried the following to search lsof output first thing when inotifywait finds a file change.
    file=$(inotifywait -r /home/mang/watch --format %w | sed 's/.$//'); lsof | grep $file
    while in another terminal running "vi /home/mang/watch/test"
    the output is:
    zsh 12574 mang cwd DIR 254,11 4096 4723089 /home/mang/watch
    vi 16790 mang cwd DIR 254,11 4096 4723089 /home/mang/watch
    try it!

  • Welcome to the Oracle JRockit Real Time forum

    The JRockit forum over at forums.bea.com is since the first of July in read only mode - this is now the official forum for the JRockit Real Time product.
    Best regards,
    Stefan

    Bonjour "Etudiant from Tunisia",
    I'm not sure what you mean with "please give me the user/password".
    As far as I know there is no online OWB available where you could try out the product (if that is what you mean).
    If you would like to learn more about OWB, read online documentation or for instance the link that is provided in an earlier post in this thread.
    Otherwise simply install OWB and try it yourself. The Installation and Configuration Guide is clear enough even without much experience installing Oracle software, and the OWB User Guide provides some basic insight on working with OWB itself.
    Good luck, Patrick
    ps If people are still expecting what Igor mentioned when he started this forum ("Oracle Warehouse Builder (OWB) product management and development will monitor the discussion forum on regular basis"), don't count on it; fortunately the product itself has been around long enough now, there are quite some users that can share usable insights and/or drop some useful lines on the new threads... ;-)

  • REGARDING CONFIGRING THE PB30 IN REAL TIME

    can we configure the pb 30 in IDES trainig server. if it is possible how we will configure the settings?
    please help in how we will configure the in real time?

    Try this
    SPRO -> Personnel Management -> Recruitment -> Dialog Controls -> Change Action Menu
    SPRO -> Personnel Management -> Recruitment -> Dialog Controls -> Dynamic Actions in Recruitment -> Create Dynamic Actions

  • The problem with Real-Time Data Acqusutuin

    Hi , all
    I created ds with Generic Delta : Delta-Specific Fields pointed time stamp and in settings checked Real-time Enabl . After that created modeling in BW , made initial update like discribed in SAP Documentation , created one more infopackage with adapter :Real-time extraction from sap , assigned infopackage and dtp to daemon and started job of daemon .
    Request stay yellow all of time and dosn't bring no one records of changes in R3 . Anybody know what is the couse for that? Maby I forgot to check something anywhere or star trigger anyone!?

    The following setup working fine for me
    In R/3 for Generic Delta --- 
            Filed Name - AEDTM
            0Calday -- Radio Button - 'ON'
            Upper Limit - 0
            Lower Limit - 2
            Real_Time enabl - Check Box - 'ON'
            New Status for changed records - Radio Button - 'ON'
    In BI
        Create infopackage (init) for replicated datasource
        Execute the DTP to load this init data to DSO.
        Do NOT activate DSO
        Now create another Infopack (real_time Enable & ) and create real-time DTP.
    In RSRDA
        Create a Daemon
        Assign InfoPack & DTP to Daemon.
        Now start daemon...Here the message says something like 'one of the request is not activated'.
        Now, select DTP under Daemon --> use menu Edit --> Repair Chain --> Execute
        (If repair chain is not yet there then Daemon --> use menu Edit --> Repair Chain --> Generate and  
         once this is done execute the using the above path). Once the chain finishs
        Now start Daemon and refresh.
        Now u can see, an open request (yellow) under infopackage.
        As soon as the new records gets load into PSA, then an open request starts under DTP.
        (Note: If no new data available in PSA, no open request starts under DTP)
    Also note that, RDA requests (in PSA & DSO Manage) should always be in yellow, that means Real-Time Aquisition is working.

  • Hi , i think i will have a look an te AVI tools, what i am most interested in is looking at sending voice across the internet in real time.

    Hi Kyle, what i am looking at is sending voice in real time across the internet using labView functions i dont want to bring in another application and make things more complicated.

    I am not sure exactly what you are asking. If you have a previous post which Kyle answered I would suggest just posting back to it.
    However if you want to send data across TCP in LabVIEW there are some TCP VIs that are quite easy to use. You open a connection, write and read from that connection, and then close it. However data send over TCP using the TCP VIs is sent as a string, not as "voice" however I am not sure what data type you are currently using.

  • How can I make the x axis real time?

    I would like to know how to make the X axis of a chart/Graph into realtime so that I can go in increments of seconds or milliseconds. How can I do this? I am getting some really funny stuff on my graphs and I notice the manual says that the "Time" label is just a default label. So I would like to know how to get the "real" time on my axis. Do you have any good ecamples?
    Thanks,
    Brian

    Zvezdana,
    I don't have LV 7, (I have 6.1) so that executable didn't come in. Also with what you mentioned won't I just get the time and date in seconds? what I want to get is the data ploted for the amount of time that the VI is running or that my Kodak Imaging board has been programmed to cycle within. I am going to attach some of the stuff I have been getting, I don't know if it is REAL TIME ,which I want, or if it is not.
    Attachments:
    Question_for_engineers.doc ‏20 KB
    Test_for_technicians.zip ‏347 KB
    Front_Panel1d.jpg ‏83 KB

  • About using the labview in real time DAQ system

    Hi All
        I designed a DAQ board based on PCI bus by myself, using labview for my graphic display application software. DAQ board generate PCI interrupt every 20us(50kHz). then PC respond it and read the data from DAQ board, that means the sampling frquency is 50kHz. the DAQ driver is generated by NI-VISA. it goes well after installing. I am sure that VISA detecte the PCI interrupt and triger a PCI interrupt event every 50kHz.
        But I face a problem, labview can not respond reading data in a real time. so does labview can not be used in the real time system? or is there something wrong with other else? if that is true, how can I solve it?
        by the way, I read the VISA help document. found there are two ways to respond PCI interrupt. one is callback, the other is queuing. I use the second way. I beg your help.

    I think you can use buffered signals with some changes on your circuit, with real time can be hard to implement with not supported hardware.
    Best regards

  • What is the difference between Real-Time (RR) and Time-Sharing (TT)?

    Hi Guys,
    I am trying to distinguish between LMS process priorities of Real-Time Vs Time sharing and was not able to find any good document explaining me the difference between them. May be one of you Gurus can explain the difference between TT and RR? Any metalink doc id or any url on this issue will be appreciated.
    --MM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Hi, Time Sharing scheduling is based on credits that are allocated to the process while creation and as long as process keep consuming the OS resources (CPU etc), its priority keeps on changing dynamically (Because process has lost credits) where as processes with Real Time Scheduling are given priority over other processes configured with Time Sharing (even kernel resources).
    In simple terms, if LMS is configured with Time Sharing scheduling on a very busy Oracle RAC system, LMS process may contend for the CPU resources, which may cause performance bottleneck in cluster environment.
    In Oracle Real Applicaiton Cluster, various organizations has gained performance benefits of setting few Oracle processes such as LMS with Real Time scheduling.
    Thanks & Regards
    -Harish Kalra

  • How do I modify the angle in real time?

    I would like to modify the transformation on the fly without using Alpha, do I just TG.setTransform(Transform3D)?
    Urgent, thanks

    It worked for me.

  • When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic, I use the voice recorder all the time and I have no problems w FaceTime. My headphones and Bluetooth do the same thing as far as not being able to be hea

    When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic bc face time or voice recorder are not affected. I can't even use my headphones or Bluetooth to get around the problem. This has stumped 2 geniuses, they just try to swap it out for $150.

    I am having the same issue with my iPhone 4. I can hear everyone but they can't hear me. Visited Apple Store and they said speakers were out, both bottom mic and top one for speaker phone. Said they were busted. Reloaded all software and didn't work. Got in parking lot and worked for 1 call. Now it's out again. Wanted $150 for new phone, haven't done it yet. don't know what to do.

Maybe you are looking for