¿Is it possible to hide a list in service request customized form?

Hi all.
I've created two custom lists in authoring tool to the service request form.
My question is : ¿ Is it possible to hide one or both ?
Tks.
Regards.

You tried to set the "Visibilty" of the list field in the form to "Hidden"? (Mark the list field and set "Visibility" to "Hidden" in the Details)
Andreas Baumgarten | H&D International Group

Similar Messages

Issues with Simple Lists in service requests

We are using Service Manager 2012 and have run into a problem with simple lists within the service requests we created. We believe the issues started after we upgraded to Service Manager SP1 and Silverlight 5.1. What happens is you can select
one of the options in the simple list, but if you decide to change back to the original option, the system won't allow it. In the case where there might be three options in the simple list (i.e. New, Change, Delete), you can select each one once, but
if we try to change it back to any of the other options the system won't allow it. We tested all of this before going live and everything was working, but just before we went live SP1 came out and so we elected to upgrade to it first. We then needed
to upgrade to Silverlight SP1 to work with Service Manager SP1. We retested all of our service requests again just before going live, but didn't think we needed to go through every simple list so we didn't retest this. Since then the simple lists
are problematic. Has anyone else experienced this and if so is there a fix that will correct this issue?

Yes!
We submitted a business impact statement back in February and after pushing them on a weekly basis, we finally received word that we will be receiving a hot fix next week. Until we actually receive the hot fix and confirm that it works, I will wait
to post another update on this.
With that said, they came up with a temporary workaround about 2-3 weeks ago. This is the message regarding the temporary fix that we received from the engineer that has been working on the issue:
After doing code review I identified the regression was introduced in the binaries that are included as part of this Silverlight XAP file:
RequestOfferingSilverlightModule.xap. As we discussed on the phone going back to the pre SP1 version means you will lose any enhancements/fixes that were introduced in SP1. Looking at the Change history for this module I only see two changes
that were introduced in SP1 and those changes are as follows:
The text field control only shows the first three lines.
Hierarchical support for List Items in Portal
To confirm my findings I replaced this XAP file with a pre SP1 version and I couldn’t repro the issue in my lab. I also confirmed implementing this module I lose the
above fixes that were introduced in Sp1.
To implement the workaround, please follow the below steps:
Connect to the Web Content Server, locate the following directory:
C:\inetpub\wwwroot\System Center Service Manager Portal\ContentHost\Clientbin
Rename the following file RequestOfferingSilverlightModule.xap
to RequestOfferingSilverlightModule.xap.org
Copy the attached file RequestOfferingSilverlightModule.xap to the folder:
C:\inetpub\wwwroot\System Center Service Manager Portal\ContentHost\Clientbin
Restart IIS by issuing the following command at the command prompt:
iisreset
Clear the client side cache and see if you can reproduce the issue.
Once confirmed the issue doesn’t reproduce, please proceed with testing all scenarios that make use of the Self Service Portal.
If you don't have the pre SP1 version of the file I'm sure you can get it from Microsoft. We are not using hierarchical lists so the temporary fix is currently working for us without any issues.

Is it possible to hide empty list items in a web app?

Hi,
as you can see on the here included image, below "Ihr Profil", there are 10 items provided by a webapp which are customized in the details.htm page as an unordered list.
In this case there are only 6 items filled out, the rest is empty, but the empty items do appear. Is it possible to tell the details page, not to display those empty items?
Thanks a lot for your interest and help

There are ways to do this with jQuery, but an easier way would be to use CSS.
ul li:empty {
   display: none;
Though this will not work in IE8/7, if that is a deal breaker you will need to use jQuery: http://jsfiddle.net/F7ZWV/
$("ul li").each(function() {
                                                  var $this = $(this);
          if($this.text() == ""){
             $this.remove();

Hide/Unhide Button on a Custom Form?

Hello! I am looking for some ideas regarding the ability to hide/unhide a button on a custom form. Ideally, I would like to create an authorization group, if a user is a member of the authorization group, they can see the button, if not, the button is hidden. Is this something that can be done? If not, does anyone have another way of doing this? Thank you.

Are you asking specifically for Smartforms, SAPforms, Interactive Adobe forms? Or generally about UI programming?
Generally yes, this is possible and is also often done to give the user a more friendly interface to work with (without having to click on buttons, only to discover that they cannot use it anyway).
Many standard transactions are developed in this way.
Cheers,
Julius

Sxmb_moni - selction lists for service, interface etc. are empty

If I use the transaction sxmb_moni at XI/PI systems it is possible to get such lists of services, interfaces and namespaces if I use the selection help at the selection screen. If I click at the selection help of the sender interface column I get all my sender interfaces.
If I do the same at one of my SAP applications systems I always get the message "No values found" Is this normal (by design) or is there a configuration error?

>
Carlos Gonzalez wrote:
> Hi Gil,
>
> It is normal (by design).
>
> However, you can monitor your proxys (applications systems)
> from RW in XI system. In message monitoring, select in 'Messages from component':
> your proxy: ' Proxy Runtime XXX...'
>
>
> CArlos
Thanks Carlos, that was the answer of my question. I've assumed this allready.
Edited by: Gil Ritter on Oct 15, 2008 11:09 AM

Possible to hide browse sequences?

I have a few topics in my chm that do not contain browse
sequences. They are standalone topics that do not appear in the TOC
or index. When the help is called from the application, they are
launched in the right pane of the chm. The problem I have is that a
"default" browse sequence will still appear at the top of the chm
even though the topics don't have any assigned browse sequences.For
these topics, is it possible to hide the browse sequences from
appearing?

Hi Emmanuel
Actually this should be possible. What you would do is to
create a new window that would be used for your context sensitive
calls. Then when your developer calls the help, they specify the
window it should appear in. That window would be configured with no
browse sequence bar.
Cheers... Rick

HT2486 I am sending an email to a group which I have created in my contacts. I would like to hide the list of people's emails but cannot see how I can do that. Can anyone help please?

I am trying to send an email to a group which I have created in my contacts. I would like to hide the list of email addresses but cannot see how to do this. Can anyone help please?

Thank you for your message.
I can see how you do that when using the 'normal' emailing system from my mailing box, but not when working from the contact application (the 'book' on the bottom icon bar with the @ on it)....

How to hide Jump list's Tasks in Windows 7 using userChrome.css

How to hide Jump list's Tasks in Windows 7 using userChrome.css

Try to disable some browser.taskbar.*enable prefs on the about:config page.
* http://kb.mozillazine.org/about%3Aconfig

Is it possible to hide part of the line in webI line chart

I had webI line chart which is showing for 2 months data, and is it possible to hide the line for only first 10 days in the line chart and continue the line after 11 th day till the end?

@rajesh: I didn't understand why should we use Relativedate() function?can you please explain little bit more. Becuase the report has customer exit written such a way that if I run the report today it will show up previous 60 days
For example:
today is 04/06/2011
so in the report date column has values and shows up like
02/06/2011
02/07/2011
02/08/2011
04/05/2011.
So now I should hide/avoid/shouldn't show First 10 days. In example above 02/06/2011, 02/07/2011,02/08/2011.....like wise 10 days so till 02/16/2011 shouldn't be shown in the report. The beginning of the report should start from 02/17/2011 till 04/05/2011..
Edited by: saathiyaa on Apr 6, 2011 9:31 PM

Is it possible to hide desktop folders until needed

MacBookPro screen real estate limited. Folders and other junk on my desktop can be distracting on top of that.
Is it possible to hide them until I need them?

You can eliminate mounted volumes via Finder Preferences>General
You can reduce folder clutter by being neater!
But if you really want to hide everything on your Desktop, then download the free utility TinkerTool, and use this option:
To make the Desktop objects visible again, re-run TinkerTool and uncheck that box.

Is it possible to submit a list item and at same time query/search the results if parameters are matched.

Hello,
Is it possible to submit a list item and at same time query/search the results if parameters are matched.
Example - user logon to site enter search parameters and hit submit button. Once done parameters gets saved in list and shows search results on page. I have been asked to do this with
SP designer and InfoPath doesn’t work due items limits.
Please suggest.
Thanks,
Manish
Manish

Hi Manish,
may i ask if you need,
when user account click the login button, it will be authenticate the user and then it will show search result page?
may i know how the keyword of words to be put? is it together with the user account box, password and keyword?
or it will be like, after user authenticate, it will redirect to search page, so that user may use the search page to input the keyword?
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Is it possible to hide the save function and only use the save as function in teststand

Hi,
When i'm done building a sequence i want to prevent other engineers to save the sequence with the same filename (or version number).
Is it somehow possible to "hide" the save button and only use the save as function?
Or is there another possiblity to solve my problem.
The idea is to have a sequence called Sequence_V1.0.seq which i have build. When installing this in a factory enviroment I would like whenever there is a change needed in the sequence that the version number increases (manual action) (becomes Sequence_V1.1.seq). So from the moment you want to save i would like to only have the function save as. In this way you are obligated to fill in a new sequence name (original sequence will be read-only)
What would even be great if there could be a log of what the changes were
Thx!!!

1) You could mark the file as read-only, by default you would then not be able to save over it. The user could make it not read-only though if they know what they are doing.
2) Another possibility is to lock the sequence file for editing (this is a teststand feature). Go to the Sequence File Property dialog, on the advanced tab, where it says Password Protection, set it to Not Editable and give it a good password. This doesn't however keep someone from saving another file to the same name as the locked one, but they at least won't be able to saved the locked file again without your password, nor will they be able to edit it.
Hope this helps,
-Doug

Is it possible to sort the list of Conditions/Calculations?

Is it possible to sort the list of Conditions/Calculations so that they display alphabetically in the list?
My list of conditions is getting quite long and haphazard now!
Cheers
Sapphie

I was afraid of that!. It is very disappointing because , as I am developing a set of reports for the first time, I will create conditions/calculations in quite a non-ordered way and then end up wanting to group similar ones together.
Hopefully a future version will allow this?
Lee

Is it possible to hide the yellow box that appears when you scroll over any object in the form?

Is it possible to hide the yellow box that appears when you scroll over any object in the form? This box contains the item name or caption.

Hi,
Under Tools ... Options ... Workspace, there is an option "Display Object Name Tool Tips While Pointing".
Try clearing that.
Bruce

The possibility to hide for displaying a user status in work order

Hello gurus,
I have following issue:
It is possible to hide only for displaying a user status in a work order when it's active?
br,
Laurentiu

See my [recent post|https://forums.sdn.sap.com/click.jspa?searchID=25309331&messageID=7376021] which references user-exit STATTEXT.
PeteA

¿Is it possible to hide a list in service request customized form?

Similar Messages

Maybe you are looking for