Is it possible to hide selected bookmarks in bookmark pane?

We want our application to launch a PDF opened to a certain bookmark. However, that bookmark will be a numeric ID, so we don't want it to be displayed in the bookmark pane. We DO want the bookmark pane to display our standard table of contents.
So, is it possible to selectively hide the numeric ID bookmarks, while leaving the bookmarks based on text headings visible? The PDF will be generated from an InDesign file (CS6) on Windows 7.
Thanks for any help and advice.
RB

Here's an example to help you think of how to use destinations. In InDesign CS6, I created two hyperlink destinations (Hyperlinks panel > Panel menu > New Hyperlink Destination). I selected headlines on pages 4 and 5: "Seeds of Inspiration" on page 4, and "Professor Wangari Maathai" on page 5, and chose New Hyperlink Destination. Because they were text, Text Anchors were created.
On Page 3, which is the table of contents you see below, I selected the entry "Seeds of Inspiration......page 4" and turned into a Hyperlink (Panel menu > New Hyperlink). I selected the Text Anchor for page 4. I repeated a hyperlink leading to the Text Anchor on page 5. So you can use hyperlinks to take you to a destination.
But you could also create a button (you mentioned user presses F1 on a particular screen—that could be a button). So I also created a button at the top of page 3. The button has an action: Go to Destination. I selected the same Text Anchor I used with a link. When the button is selected in Acrobat, its settings are shown on the left side of the screen capture.
I don't usually use the Destinations panel. I don't need it, but you can see that the destinations are listed in the Destinations panel.

Similar Messages

  • When saving a PDF from a FrameMaker book, is it possible to set document filenames as bookmarks in the PDF?

    When saving a PDF from a FrameMaker book, is it possible to set document filenames as bookmarks in the PDF? Currently when I have a Framemaker book that I want to save as a PDF, I choose Save Book As and then choose PDF for the file format. A dialog box comes up in which I can choose the Bookmarks tab and choose which tagged content I want to be made into bookmarks in the PDF file. What if I would rather have the filename of a document rather than the chapter title be a bookmark in the PDF? Is that possible? Where would I choose that option? Thanks!

    There are two ways that you could do this. You can either use postscript text frames and enter the correct pdfmark entries to show the file name with the corresponding actions (i.e. where to go in the PDF) or you can use hidden text in FM and the "Filename (Short) " variable in a unique paratag to be picked up by FM's bookmark creation.
    To go the pdfmark route, see http://www.pdflib.com/fileadmin/pdflib/pdf/pdfmark_primer.pdf for details and also consult the Adobe Pdfmark Reference manual (http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/pdfmark_reference.pdf).
    The hidden text route would use FM's Color Views to specify a colour as Invisible. This will make the content visually disappear from the screen (and any output), but FM will still be able to read the contents of any text that is coloured with the Invisible colour(s).
    1. Pick or create a colour that you want to be invisible. [Magenta is usually a good bet and stands out visually].
    2. Set that colour to be invisible in View 1 and visible in View 6. [you can use the shortcut <esc> v 1 and <esc> v 6 to toggle between the views.]
    3. Create a paratag to use for the filename and set the font colour to use the invisible colour.
    3. In the title of each chapter file, drop an anchored frame that is set to be outside of the text frame [so it won't interfere with any other content].
    4. In that AFrame, insert a text frame and use the invisible paratag defined in step 3.
    5. Insert the Filename (Short) variable in that text frame.
    6. Repeat steps for all files to be included in the bookmarks.
    When creating the PDF bookmarks, select only the paratag used for the invisible colour.
    Don't forget to toggle the View to be invisible (i.e. <esc> v 1  - this also works at the book level for all files in the book).

  • Possible to hide browse sequences?

    I have a few topics in my chm that do not contain browse
    sequences. They are standalone topics that do not appear in the TOC
    or index. When the help is called from the application, they are
    launched in the right pane of the chm. The problem I have is that a
    "default" browse sequence will still appear at the top of the chm
    even though the topics don't have any assigned browse sequences.For
    these topics, is it possible to hide the browse sequences from
    appearing?

    Hi Emmanuel
    Actually this should be possible. What you would do is to
    create a new window that would be used for your context sensitive
    calls. Then when your developer calls the help, they specify the
    window it should appear in. That window would be configured with no
    browse sequence bar.
    Cheers... Rick

  • Is it possible to hide part of the line in webI line chart

    I had webI line chart which is showing for 2 months data, and is it possible to hide the line for only first 10 days in the line chart and continue the line after 11 th day till the end?

    @rajesh:  I didn't understand why should we use Relativedate() function?can you please explain little bit more. Becuase the report has customer exit written such a way that if I run the report today it will show up previous 60 days
    For example:
    today is 04/06/2011
    so in the report date column has values and shows up like
    02/06/2011
    02/07/2011
    02/08/2011
    04/05/2011.
    So now I should hide/avoid/shouldn't show First 10 days. In example above 02/06/2011, 02/07/2011,02/08/2011.....like wise 10 days so till 02/16/2011 shouldn't be shown in the report. The beginning of the report should start from 02/17/2011 till 04/05/2011..
    Edited by: saathiyaa on Apr 6, 2011 9:31 PM

  • Is it possible to hide desktop folders until needed

    MacBookPro screen real estate limited.  Folders and other junk on my desktop can be distracting on top of that.
    Is it possible to hide them until I need them?

    You can eliminate mounted volumes via Finder Preferences>General
    You can reduce folder clutter by being neater! 
    But if you really want to hide everything on your Desktop, then download the free utility TinkerTool, and use this option:
    To make the Desktop objects visible again, re-run TinkerTool and uncheck that box.

  • Is it possible to hide the save function and only use the save as function in teststand

    Hi,
    When i'm done building a sequence i want to prevent other engineers to save the sequence with the same filename (or version number).
    Is it somehow possible to "hide" the save button and only use the save as function?
    Or is there another possiblity to solve my problem.
    The idea is to have a sequence called Sequence_V1.0.seq which i have build. When installing this in a factory enviroment I would like whenever there is a change needed in the sequence that the version number increases (manual action) (becomes Sequence_V1.1.seq). So from the moment you want to save i would like to only have the function save as. In this way you are obligated to fill in a new sequence name (original sequence will be read-only)
    What would even be great if there could be a log of what the changes were
    Thx!!! 

    1) You could mark the file as read-only, by default you would then not be able to save over it. The user could make it not read-only though if they know what they are doing.
    2) Another possibility is to lock the sequence file for editing (this is a teststand feature). Go to the Sequence File Property dialog, on the advanced tab, where it says Password Protection, set it to Not Editable and give it a good password. This doesn't however keep someone from saving another file to the same name as the locked one, but they at least won't be able to saved the locked file again without your password, nor will they be able to edit it.
    Hope this helps,
    -Doug

  • Is it possible to hide the yellow box that appears when you scroll over any object in the form?

    Is it possible to hide the yellow box that appears when you scroll over any object in the form? This box contains the item name or caption.

    Hi,
    Under Tools ... Options ... Workspace, there is an option "Display Object Name Tool Tips While Pointing".
    Try clearing that.
    Bruce

  • The possibility to hide for displaying a user status in work order

    Hello gurus,
    I have following issue:
    It is possible to hide only for displaying a user status in a work order when it's active?
    br,
    Laurentiu

    See my [recent post|https://forums.sdn.sap.com/click.jspa?searchID=25309331&messageID=7376021] which references user-exit STATTEXT.
    PeteA

  • Is it possible to hide/show the "Do you want to save changes you have made?" msg

    Hi,
    Is it possible to hide and show the Oracle message "Do you want to save changes you have made?"
    Thank You

    Not really.
    You have to use commit_form to commit the changes or a
    rollback_form to rollback just before exit_form, clear_form,
    or clear_block.
    Or, use clear_form(no_validate), clear_block(no_validate).
    It might be good to check wether there is some change in the
    data and show an alert in your own language asking the user in
    his/her own language wether he/she wants to commit the changes
    or not.

  • Is it possible to hide Tabs by using Url in FPM_OIF

    Hi All.
    I am calling one Standard Application from my custom application.
    Standard Application has 8 tabs. There i want to hide some tabs by using URL.
    Is it possible to hide through url.?
    Regards,
    Jack.

    Issue Solved.
    Implemented Enhancement for Standard Component and Hiding tabs based on Custom URL Parameter.
    Regards
    Jack.

  • ¿Is it possible to hide a list in service request customized form?

    Hi all.
    I've created two custom lists in authoring tool to the service request form.
    My question is : ¿ Is it possible to hide one or both ?
    Tks.
    Regards.

    You tried to set the "Visibilty" of the list field in the form to "Hidden"? (Mark the list field and set "Visibility" to "Hidden" in the Details)
    Andreas Baumgarten | H&D International Group

  • Is it possible to hide the links in the DBI HRi module

    Hi All,
    Module: DBI HRi
    Is it possible to hide the links in the reports in DBI - HRi module.
    Example: Employee Details Report:
    when I open this report, it shows some of the links in the report below. i.e. Employee Absence Details.
    I would like to hide those links. Is it possible do the same with the standard functionality.
    Regards,
    GR.

    Hi,
    It would be great if you could share the solution with us.
    Thanks,
    Hussein

  • How do I set the "hide selection" key back to CMD+H?

    When I installed Photoshop CS6 on my Mac, it gave me the option of using the keys CMD+H to hide Photoshop.  Without thinking I said "Yes"  Duh!  What was I thinking.  I always use CMD+H to hide selections!  I have been looking around in the prefs, bue can't find a way to change it back.  Thanks, Ken

    mistercrisp wrote:
    I have been looking around in the prefs, bue can't find a way to change it back.
    It isn't in the preferences. You'll find it under Edit > Keyboard Shortcuts. Change the shortcut for the Photoshop > Hide command.

  • Is it possible user to select the chart type in WAD??

    Hi All,
    I have a requirement in WAD, where customer wants to select their own desired chart in WAD.
    Is it possible user to select the chart type?? If so please let me know the path where i need to do the setting.
    Thanks in Advance.
    Regards
    Sathiya

    Hi,
    you have to press the right mouse button on the chart (it is not so easy - there are 2 different context menus) -> in context menu -> properties -> web item -> chart setting -> chart type
    Regards
    Erwin Buda

  • Is it possible to print annotations and/or bookmarks?

    I've just started using Digital Editions. Wondering if it's possible to print my annotations and bookmarks?
    Especially important for my son, who in high school English is required to highlight and annotate novels (they require at least one note on EACH PAGE!). We'd really like him be able to do this digitally and print out his work!

    ADE won't print out the annotations, however all the notes are kept in the Annotations folder under your digital editions folder and each book has it's own .annot file. These .annot files are a fairly simple XML file. I've created a sample .php web page that will spit out all of the notes text for a .annot file in a simple HTML file put it up on my personal web site at: http://www.lesterfamily.org/ade/annots.html (front end, the actual .php is at http://www.lesterfamily.org/ade/upload.php - also Nothing gets saved on my server and am not really paying attention to hits, that'd be too much work ). However just about any XML formatter tool will do however if you don't want to use mine.

Maybe you are looking for

  • [Solved] How to force enable rounded corners in a theme on GNOME 3.16

    Hello I just recently started using arch (and I regret why didnt I use it earlier -.-, such a great OS). I put up Gnome 13.16.2 as my desktop environment particularly because I like its interface (rounded corners, the ui etc. Kinda reminds me of my f

  • IMac hard drive problem

    In the last 6 months I have had to rebuild my hardrive twice. All went well and thanks to regular back-ups I have not lost anything. Over the last week the iMac has ground to almost a stop. Spinning beach ball regularly, back-ups not happening. I tur

  • Video input via firewire

    This seems to be a common question with only expensive solutions. It cost me $40.00 (Canadian) to export video from iBook to TV via 'Apples Video Adapter Kit'. But it's going to cost about $200.00 to get video into my iBook via 'MyTV' or 'EyeTV' type

  • Centrally Controling JRE Installations/Updates Company Wide

    We are currently using a java based CRM system with a huge number of different peices. We would like to look into doing some upgrades and it has come to our attention that if a user has an older version of the JRE one of the applications works fine b

  • Can not adjust brightness and minimize and maximize the screen with Fn keys

    I have bought a HP 15-D006TU laptop 1 week back. f2 and f3 for adjusting brightness and f4 to minimize and maximize the screen are not working. I am also trying to install the Hotkey driver which is mostly suggested here. but the version available is