Is it possible to hide "songs" in the Song Library?

I wanted to put some language lesson CDs on my iPod. They now show in iTunes under the Song Library. Since these aren't really "songs", I want to move or hide them from the Song list but accessible as part of a play list.
It got me wondering whether we can subcategorize songs in album folders or something in the master Song Library, but that's probably a question for another day...
Thanks!

I don't think this can be done. You may need to approach this from a different angle, like creating a Smart Playlist that contains everything in your library except for certain genres, like Spoken Word or Education, and doing your normal listening from this playlist rather than the library listing itself. This would take a small adjustment in habit but would do what you're looking for.
iMac G4 17; iBook G4 1.33 Mhz 14; iPod 3G 20GB Mac OS X (10.3.9)

Similar Messages

Is it possible to hide part of the line in webI line chart

I had webI line chart which is showing for 2 months data, and is it possible to hide the line for only first 10 days in the line chart and continue the line after 11 th day till the end?

@rajesh: I didn't understand why should we use Relativedate() function?can you please explain little bit more. Becuase the report has customer exit written such a way that if I run the report today it will show up previous 60 days
For example:
today is 04/06/2011
so in the report date column has values and shows up like
02/06/2011
02/07/2011
02/08/2011
04/05/2011.
So now I should hide/avoid/shouldn't show First 10 days. In example above 02/06/2011, 02/07/2011,02/08/2011.....like wise 10 days so till 02/16/2011 shouldn't be shown in the report. The beginning of the report should start from 02/17/2011 till 04/05/2011..
Edited by: saathiyaa on Apr 6, 2011 9:31 PM

"Is it possible to hide/remove/change the server name/type and

Is it possible to change the server name/type and version number being sent in the http response header by iPlanet Web server so a hacker can't see what server and version I'm running? If yes, what is the procedure to do it?

Hi,
I have tried the ServerString none entry in magnus.conf but still it is showing the Server information in the header if you use telnet . Is there any other way to hide or to mask this information.
Thanks,
Ramki

I have an ipod nano 8gb which is full, my husband is a jazz fan, I am thinking of buying another ipod classic 160gb - is it possible to link this to the same library in itunes and just put all his jazz on the new ipod?

I have an ipod nono 8gb which is about 5 years old and is full - my husband is a jazz fan, and now I have jazz on my little ipod and my ipod touch. I am thinking of getting an ipod classic 160gb and putting all his jazz on to it. Is it possible for me to link it to my Itunes library and his Itunes library and just put all the jazz on to the new Ipod classic? if so, how do I then delete the jazz of the other two ipods?

There is no limit to the number of iPods you can sync to one computer, iTunes library, or account.
You might want to create a seperate iTunes library for him, perhaps on another user account on the system and move all of his Jazz music over to that new library. Once you have all of his music moved over to his own library, remove it from your own and then resync both of your iPods to clear his music off. This is just one way to do it.
If that was a bit confusing, take a look at this article for a few ways to manage multiple iPods with one computer.
How to use multiple iPods, iPads, or iPhones with one computer
B-rock

Is it possible to hide/show the "Do you want to save changes you have made?" msg

Hi,
Is it possible to hide and show the Oracle message "Do you want to save changes you have made?"
Thank You

Not really.
You have to use commit_form to commit the changes or a
rollback_form to rollback just before exit_form, clear_form,
or clear_block.
Or, use clear_form(no_validate), clear_block(no_validate).
It might be good to check wether there is some change in the
data and show an alert in your own language asking the user in
his/her own language wether he/she wants to commit the changes
or not.

How to Hide adress of the form from adress bar

Hi all ,
i want to ask that is it possible to hide or change the adress of the form from the adress bar.....like when we run the form it shows the adress like
http://develoment:8888/forms90/f90servlet?form=C:\GMS\Forms\GMS_SHIPMENT.fmx&userid=GMS/GMS@gms&buffer_records=NO&debug_messages=NO&array=YES&query_only=NO&quiet=NO&RENDER=YES
that is too long i want it does not show the whole adress and also same problem with reports when i call the the report it show the whole adress and that is not good security wise
i am using oracle 9IDS
thanks in advance
Shayan
[email protected]

go in your <forms-home>forms\server - directory. there is formsweb.cfg.
All the [default] - parameters are global. If you don't set a parameter in your own section, then the fallback-parameters are stored there.
at the end of the file you should write your own settings:
e.g.
# myConfig - this is an example for your own Config-Section
[myconfig]
form=myStartForm
imageBase=codeBase
splashScreen=no
separateframe=true
try it
Gerd

Hide Dashboard from the Drop Down list - OBIEE 11.1.1.6.2 BP1

Hi,
We have got an Index page, which contains links to all Dashboard the user is allowed to see and it is the home page for every user. Apart from that user's can select Dashboard from the drop down list. Is it possible to hide some of the dashboards from the drop down list but still users should continue accessing them from Index page?
Thanks in advance.

Hi,
For showing the Dashboards as a drop down list I believe you are using HTML code. If so edit the HTML to remove the dashboards you do not want to see in the drop down.
If the drop down is because of excessive pages shown on the dashboard then under the dashboard properties you can select the hide option for the dashboard. So by default the dashboard page would not show up and the index links would show.
Let me know if this helped.
Regards,
Jay

2 Ipods on the same library?

I have an Ipod, and my girlfriend just picked up a Nano. Is it possible to work both off the same library? She doesn't want to start a new library of her own; she just wants to move some songs from my library onto her Nano. Is this possible and is there anything special I need to do?

See these articles about using more than one iPod on one computer, and with either one or more iTunes libraries.
Multiple iPod installations.
How to use multiple iPods with one computer.
If you have the latest iTunes, an easy way to create a new library is to hold down the 'alt' key whilst opening iTunes (for Macs), or hold down the 'shift' key (for Windows).
This will give you the option of either using the current iTunes library or creating a new one.
There are various methods of transferring different songs to different iPods with a single iTunes library.
One is to manage the songs manually.
With this setting, you can drag and drop songs/playlists etc onto the iPod from iTunes, and also delete and/or edit songs which are currently on the iPod without affecting the iTunes library.
If you wish to keep the convenience of automatic sync, then you could set the iPods to sync with "selected playlists". This setting can be found in the iPod summary screen under the 'music' tab. With this setting, different playlists can be transferred and later deleted from each iPod without affecting any playlists stored in iTunes or the playlists on the other iPods.
Also, on the 'summary' main page you will see the option to "only sync checked items". With this setting selected, if you remove the check marks from any songs in iTunes, they will not be transferred to the iPod. You can restore the check mark if you want to put the songs back on the iPod at a later date.
Be aware that when playing songs in iTunes, any songs that do not have a check mark against them will be skipped over and will not be played.

Moving photos from the Photo Library to the Camera Roll

Hi,
I have recently moved all of the photos on my camera roll into the photo library, however I want to put some back onto the camera roll, but I can't figure out how to. I realize that there probably is no way because of what both of these albums are actually for, but I was wondering if there was any way possible.
Any help would be appreciated, thanks.

{quote:title=Nissin101 wrote @ 3:36pm EMT:}{quote}
Well I was able to move photos from the camera roll to the photo library by sending *the pictures via email to my dad's blackberry, then saving them to my computer from his phone, then putting them back on into the photo library*.
This is what I said originally.
{quote:title=Nissin101 wrote @ 4:08pm EMT:}{quote}
Alright I guess that answers my question then. However, just as I said I was able to transfer photos from my camera roll to my photo library, so at least that is possible.
I never said that I did it directly, neither did I mean to imply that I was looking for a direct solution. This I guess is where our misunderstanding comes from. I just did not feel like repeating the whole process I went through. Regardless, I would rather this thread not derail into who said what and whose misunderstanding who. I now know that it is not possible to get pictures from the photo library to the camera roll in any way, so my question is answered for now at least.

HT201812 In the past it was possible to delete songs/tones from iTunes but this no longer seems to be the case. Is it possible to delete songs or tones if they are not duplicated - I just no longer want them in my library?

In the past it was possible to delete songs/tones from iTunes but this no longer seems to be the case. Is it possible to delete songs or tones if they are not duplicated - I just no longer want them in my library?

Howdy SJHocking,
It sounds like you want to know how to dele songs and ringtones from iTunes. Take a look at the article linked below, it’ll walk you through the process of deleting content from iTunes.
Delete songs, playlists, or other items - iTunes Help
If you have iTunes Match enabled, take a look at this article which will walk you through the process of deleting songs from iCloud.
iTunes Store: How to delete songs from iCloud - Apple Support
Cheers,
-Jason

Is it possible to hide the save function and only use the save as function in teststand

Hi,
When i'm done building a sequence i want to prevent other engineers to save the sequence with the same filename (or version number).
Is it somehow possible to "hide" the save button and only use the save as function?
Or is there another possiblity to solve my problem.
The idea is to have a sequence called Sequence_V1.0.seq which i have build. When installing this in a factory enviroment I would like whenever there is a change needed in the sequence that the version number increases (manual action) (becomes Sequence_V1.1.seq). So from the moment you want to save i would like to only have the function save as. In this way you are obligated to fill in a new sequence name (original sequence will be read-only)
What would even be great if there could be a log of what the changes were
Thx!!!

1) You could mark the file as read-only, by default you would then not be able to save over it. The user could make it not read-only though if they know what they are doing.
2) Another possibility is to lock the sequence file for editing (this is a teststand feature). Go to the Sequence File Property dialog, on the advanced tab, where it says Password Protection, set it to Not Editable and give it a good password. This doesn't however keep someone from saving another file to the same name as the locked one, but they at least won't be able to saved the locked file again without your password, nor will they be able to edit it.
Hope this helps,
-Doug

Is it possible to hide the yellow box that appears when you scroll over any object in the form?

Is it possible to hide the yellow box that appears when you scroll over any object in the form? This box contains the item name or caption.

Hi,
Under Tools ... Options ... Workspace, there is an option "Display Object Name Tool Tips While Pointing".
Try clearing that.
Bruce

Is it possible to hide the links in the DBI HRi module

Hi All,
Module: DBI HRi
Is it possible to hide the links in the reports in DBI - HRi module.
Example: Employee Details Report:
when I open this report, it shows some of the links in the report below. i.e. Employee Absence Details.
I would like to hide those links. Is it possible do the same with the standard functionality.
Regards,
GR.

Hi,
It would be great if you could share the solution with us.
Thanks,
Hussein

Is it possible to rate songs directly on the iPod touch?

Is it possible to rate songs directly on the iPod touch?
Also, is it possible to rate videos directly on the iTouch?

Hi jackhowson,
As Micromen said, you can rate songs directly on your iPod Touch.
However with videos, currently you can't! You'll have to rate them on your computer. If you would like to ask Apple this feature, click [Name|http://www.apple.com/feedback/ipodtouch.html] and fill out the form.

Is it possible to hide a hierarchal layer from one that is lower in the layer stack?

In AI CS5 Version 15.0.2 for Windows 7 64-bit; Is it possible to hide a hierarchal layer from one that is lower in the layer stack? I would like to make visible one of the bottom layers and hide a layer near the top that is on a separate artboard.

Shift click on the mask in the transprency panel and you will add a red x through the mask symbolizing disabling of the mask.

Is it possible to hide "songs" in the Song Library?

Similar Messages

Maybe you are looking for