Is it possible to hide the LabView Data folder through the labview application?

I really want to get rid of the LabView Data folder in the My Documents Folder that is created when the built labview application is run. Since it does not seem to be possible to remove or relocate it, i was wondering whether it is possible to at least hide it - but I want it to be done automatically, i.e. through the program itself when it is executed.
Thanks
Tim, Van

Hi,
you cannot delete the "LabVIEW Data" Folder since your application is active!
It's possible that you change the attribute (hide) for the whole folder before you start the compile process!
If you want to do this automatically, you should ask microsoft which dll is relevant for this scope!
regards,
Thomas Sandrisser
NI Germany
http://www.newgistics.com

Similar Messages

Is it possible to hide the save function and only use the save as function in teststand

Hi,
When i'm done building a sequence i want to prevent other engineers to save the sequence with the same filename (or version number).
Is it somehow possible to "hide" the save button and only use the save as function?
Or is there another possiblity to solve my problem.
The idea is to have a sequence called Sequence_V1.0.seq which i have build. When installing this in a factory enviroment I would like whenever there is a change needed in the sequence that the version number increases (manual action) (becomes Sequence_V1.1.seq). So from the moment you want to save i would like to only have the function save as. In this way you are obligated to fill in a new sequence name (original sequence will be read-only)
What would even be great if there could be a log of what the changes were
Thx!!!

1) You could mark the file as read-only, by default you would then not be able to save over it. The user could make it not read-only though if they know what they are doing.
2) Another possibility is to lock the sequence file for editing (this is a teststand feature). Go to the Sequence File Property dialog, on the advanced tab, where it says Password Protection, set it to Not Editable and give it a good password. This doesn't however keep someone from saving another file to the same name as the locked one, but they at least won't be able to saved the locked file again without your password, nor will they be able to edit it.
Hope this helps,
-Doug

Is it possible to hide the yellow box that appears when you scroll over any object in the form?

Is it possible to hide the yellow box that appears when you scroll over any object in the form? This box contains the item name or caption.

Hi,
Under Tools ... Options ... Workspace, there is an option "Display Object Name Tool Tips While Pointing".
Try clearing that.
Bruce

Is it possible to hide the links in the DBI HRi module

Hi All,
Module: DBI HRi
Is it possible to hide the links in the reports in DBI - HRi module.
Example: Employee Details Report:
when I open this report, it shows some of the links in the report below. i.e. Employee Absence Details.
I would like to hide those links. Is it possible do the same with the standard functionality.
Regards,
GR.

Hi,
It would be great if you could share the solution with us.
Thanks,
Hussein

Does anyone know if its possible to hide the numbers that appears on the Table of content?

In iBooks Author, I would like to know if its possible to hide the numbers that appears on the Table of contents, does anyone know?. Also I would like to change the yellow color that appers on the mini pics on the image gallery widgets, does anyone know if this is possible?
Thanks in advance

I don't believe doing either is possible.
Michi.

Is it possible to take a labview application and compile it to run on an embedded processor?

Hi
I was wondering if anybody out there knows if it is possible to take a labVIEW application and compile it to run on an embedded processor (e.g. ARM7)?
If so does anybody know what the required capability of the target processor is (i.e. RAM, ROM etc.) and what tools I need.
Many thanks
Ash

Ash,
There is also another option for processors like the ARM7. You can load a PDA OS on it and use the LabVIEW PDA toolkit. The LabVIEW PDA toolkit is MUCH easier to use and is quite a bit less expensive. You will have the problem of getting the OS correctly configured, but in the long run, it may still be cheaper and easier. I use it quite a bit with my Dell Axim X51v which has this processor and Windows Mobile 5. There are still problems to work out, but not nearly what there are with LabVIEW Embedded.
If you want to go the LabVIEW Embedded route and you need some help, let us know on this forum. There are several of us that have experience and can help to guide you.
Hope that this helps,
Bob Young
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

Is it possible to hide the data in a formatted cell until the data from the relevant cells has been entered?

I have a balance sheet and I'd like to be able to hide the data in the balance column until the 'In' or 'Out' for that day has been entered
Any ideas greatfully received!

Hi Quinn,
I am surprized that apple makes me go to a custom rule to chose a white font color.
To get
Or use the colour window: View > Show Colors (shift command c).
Click on a colour to apply it to text of selected cells.
Drag a colour to the selected cells to apply it as the Fill:
Some of the features that we thought were lost are just Hidden in Numbers 3! (I can't wait for a decent User Guide).
Regards
Ian.

Is it possible to hide the detail for a field in infotype screen for users

Hi,
My requirement is that.
1) For a group of users in IT0002 screen the content of SSN field would be shown as XXXXX where for some users it will show the actual value in PA20,PA30. This is not MOLGA specific, this would be user specific.
Is it possible to do that. I was trying with the exit ZXPADU01 but not working. I believe T588M will also not work in that case.
Please suggest on that.
Thanks & Regards,
Sandip

Hi,
Instead of presenting the SSN as XXXX, you can simply hide the field using screen modifications and feature P0002. The key here is using field group USERG (user group) in the decision tree. The prerequisite is assigning the set of users to a user group (UGR parameter) through SU3. That value will be the return value under USERG in the feature.
Hope this helps.
Donnie

Is it or will it ever be possible to hide the notifocation bar when using firefox? Either with an extension or as an included setting?

is there an option i havent found that will allow me to hide the notification bar while using firefox (similar to whats possible with opera mobile) if not is it likely to be added in a future update? as i dont think extensions have enough permissions to hide the notification bar.

hello, there's the fullscreen addon: https://addons.mozilla.org/mobile/addon/full-screen-252573/

Is it possible to hide the inbetween rows in jTable

I want to Hide the particular Rows within a jTable. For example the first column of the jTable contains the Values are,
1
2
3
4
5
6
7
etc.,
in an ascending order.
I want to Hide the Even numher rows like 2,4,6,...etc.,
Is it possible?

Look at some of these they may help.
Searched on "filter jtable"
http://onesearch.sun.com/search/onesearch/index.jsp?qt=filter+jtable&subCat=&site=dev&dftab=&chooseCat=javaall&col=developer-forums
rykk

Is it possible to hide the Event Browser in FCPX

This would be super helpful when using scopes and color grading! Anyone know how to do this, or if it's possible?
eric

More Apple stupidity.
What possible, rational, sane reason is there for not being able to hide the Event Browser?
I can't even begin to express the idiocy of this.
Apple software usability foolishness goes from strength to strength.
Unbelievable.
Just... unbelievable.
/sigh
Hah... only just realised that I already posted in this thread just over a year ago!
What's going on with this Apple usability nonsense?
I surmise that Apple are in fact Aliens. I really cannot think of another explanation for why they deny sensible software interaction.

Is it possible to test a LabVIEW application

I'm currently developping a LabVIEW application. To ensure functionnaliti, quality... I would like to automate test. But I would like to test the overall application. And this kind of test requiers a user that read dialog, click on button of dialog box, do some actions... Does TestStand allow us to repeat theses operation?
TestStand is new to me. I saw some demonstration in some LabVIEW seminar. But I understood that it was mainly built for testing VI that has inputs and outputs... We specify parameters and we have an average of response to compare to. am I mistaken?
Nitrof

Are you looking for a tool to validate an application? Winrunner and Rational have packages for GUI testing. TestStand is not for testing VIs. It is a test manager. It uses VIs, DLLs, etc. to perform tests, manage the results, create reports, and log data. It could replace all of your LabVIEW dialogs.

Nokia Asha 201 hides the games & applications

My
Nokia 201 asha hides the games and applications downloads such as
whatsapp and facebook, when I open my apps, it shows gallery(images,
music, etc) instead of my apps downloads, how am I suppose to fix this?
Moderator's notes: The post was edited. A more appropriate subject is provided.

Is that the error message word for word?
Because I never faced that particular error message and not be able to find it on the Internet. Mhm.
Were you able to use that trick, mentioned in that other thread?
If that does not work either, we have to double-check Nokia » Menu » Settings » Configuration. For that, which Internet APN do you need for your network operator and type of contract? If you do not know, we can look it up, but need the name of your operator, and the country your are in.

Is it possible to disable the Export Application Button/functionality

Hi fellows,
I need to disable the export button/functionality in a customer's apex installation (3.2.1) as part of the security measures.
Customer do not want developers to be able to export the applications they have access to. As the internal application is not editable (is it with some sort of trick??) , does anyone ever had this requirement and know how to do it?
Thanks in advance for your support.
JP

Hello,
>> I need to disable the export button/functionality in a customer's apex installation (3.2.1) as part of the security measures.
>> this need applies for both development and production enviroments although if a solution is available, it will be first tried in the development enviroment.
I agree with Tyler, this is indeed a really strange request. If your customer can’t rely on his developers, I would say you have a problem. I’m saying it because disabling the export button, even if it’s possible, doesn’t really give you any kind of protection. A malicious developer can still export APEX application using the Java utility APEXExport; it can be done with SQL Developer; it can also be done on a page level, and I only named the documented options.
I don’t think this type of action should be considered for a development environment. Of course, the production environment is a completely different ball game. You can use the APEX run-time only environment, and by that neutralize most of the developer related “risks”.
Just my 2 ¢,
Arie.

Is it possible to launch an EBS forms panel through an APEX application

Hi,
We have an APEX application linked with EBS 11i. We launch the APEX application through EBS menu responsability.
In this APEX application we have a list of suppliers.
When we click on the link we want to launch the EBS forms panel Suppliers.
Of course, user has got the responsability to modify the suppliers in EBS.
Question : Does anyone has done such developpement with APEX ?
Can someone tell me if it is possible or not ?
Thanks in advance.

Dear Ronan,
Another answer to my helpmail
Hi to all,
We have done developement with APEX in EBS 11.5.9 in module of Service and Order Managemeng too.
These applications developed for Telco Company.
I send some useful documents.

Is it possible to hide the LabView Data folder through the labview application?

Similar Messages

Maybe you are looking for