Is it possible to hold the last note of a soundtrack?
I have a fourteen second music loop that I'd like to hold the last note. Obviously, it's designed to be edited into a loop or larger sequence of similar music clips. I'm hoping there is a way to extend the final note of the piece so that it 'resolves' at the end. Is there a way to do this? Maybe something like time remapping in Final Cut Pro?
Answered my own question. I used the file editor and the *audio stretching tool*. I just selected the section of the song that I wanted to 'hold' and then grab the end of the selected area with the audio selection tool and drag it to the desired length. Works great.
Similar Messages
-
Hello, a couple of months ago my macbook got stolen so when yesterday i recieved an email my message was displayed on it i was wondering if there is a possibility to get the last IP address used on that machine .So if there is such possibility could someone direct me how to do it ?
I'm sorry, but I'm still not clear on the problem. Do you mean that you have both "Smith Family" and "John Smith" tied to the same email address? If so, again, that "friendly" name isn't sent to the recipient, so the person receiving the email will get exactly the same thing regardless of whether you select the "Smith Family" entry or the "John Smith" entry. The "friendly" name doesn't go along as part of the email.
It would only matter on your end when looking at your Sent email, and if that's an issue, it should be no problem to select which one you want; just start entering in the email address/name and wait a second; you'll get a dropdown with all the addresses that meet that criteria and you can just pick the correct one.
Forgive me if I'm still not understanding what the difficult is or what you're trying to accomplish. -
Is it possible to hold the HR postings in FI
.Dear experts,
could you please help me out regarding the following issue.
is it possible to hold the HR postings in FI if possible send me the procedure if not give me some reasons.i want to hold at document level in FI
for Eg: to day am going to post the document through HR to FI but the employer will make the pmt in the next month for the particular employee for time being we need to hold the document in FI... if u know the procedure plz let me know -
Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!
Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!
-
It is possible to include the jre(not the installer) with the application?
Is it possible to include the jre(not the installer) with the application, so that the application will run on its own jre.??
If so please provide me instructions,how to do it.
Thanks
IsmaSee http://java.sun.com/javase/6/docs/technotes/guides/deployment/index.html
-
My dropped Macbook plays a five note song three times and on the third time, the last note drops in pitch like it is dying. I have not shut it off, but it does this coming out of sleep mode. Can't find any references to this. Anyone know what's happening?
carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read. -
It is possible to detect the last item in a bullet/numbered list?
Just to apply a new style (paragraph spacing after)?
The script find consecutive paragraphs could be used but it evolves many steps.
And not always the last item is followed by a fixed style.I'm going to have to start giving you more time to answer, too, before I jump in with something less insightful.
-
Date: Is it possible to get the last Friday of each month?
Hello all, I am trying to create a column of dates which are a specific day in each month, e.g. the last Friday of every month, or the first Monday of every month. Is this possible, and if so could you please guide me on how to?
Thanks
JamesJames,
My thought was that you would create an array of dates with this table and Copy/Paste Values it into the range where you need it.
What I did was build a table of controls, below, where I set the year and what day of the week you were interested in and the top table will compute the dates. I used direct entry for the year and a POP-UP menu for day of the week.
The 4th 'Friday' formula is: =IF(Controls :: $C>$C, $B+Controls :: $C-$C+21, $B+Controls :: $C-$C+28)
The Last 'Friday' formula is: =IF((G+7)>EOMONTH(B, 0), G, G+7)
The formula in the Header Row is: ="4th "& Controls :: $B , etc.
There is no reason you couldn't transpose the table to have your Last Fridays in a row rather than in a column. I don't think I noticed that requirement in your original post.
And, there's no reason to have a fancy control panel if you don't think you'll ever need to create another series of dates. Just substitute values for the references to the control table.
Jerry -
Hi all,
I use the device DAQ USB-6341 to generate the desired voltage waveform by the "finite samples" sample mode.
I notice that the channel resets to zero volts after the DAQmx task is done and the DAQ USB-6341 does not have
the property AO.idleOutputBehavior to select "Maintain Existing Value".
How can I maintain the last AO value after the DAQmx task is done on device DAQ USB-6341 ?
Thanks.
GodelHow many computers do you have in the network?
What is the IP address and default gateway number on your computer?
In order to connect to the wireless network, WVC80N should get valid IP address from the access point.
If the access point has capacity to assign a private IP address to the computers and devices then I think you can use WVC80N. -
I downloaded apple mainstage and am pleased with it. However when i use it on my keyboard the the sustain pedal holds down the E note. Any suggestions on how to fix this?
If you have this problem (facetime dropping calls). Just go to settings, then general, and scroll it down to reset. Once on the reset, tap on reset all settings, it will ask your code. After you do this close out your iphone by pressing the main button on top of your iphone. I tried everything and this procedure works with me. Let me know if it works with you all.
-
Would be possible give in the master not in a DLT tape?
Hi,
The company where I'm going to send the DVD to make the copies told to my colleague that I should do the master in a DLT tape. I got a DLT recorder but I found two problems, the first is that this have not drivers for Mac, and the second is that is SCSI, the model is a Compaq 40/80 GB DLT, so I can't use it.
My question is that, would be possible to do the master in a DVD DL? (this project need at least 8 GB)
Thanks ..... HugoExcellent. I'm trying it right now. I've been submitting DLT masters for years but we recently found out that our replicator is now accepting DVD-Rs and, in the interest of keeping the budget down as low as possible, we've decided to give it a go. The DVD-5 was fine, they just accepted a regular build but I was having trouble figuring out how to do a DVD-9. Keep your fingers crossed for me
-
Is it possible to remove the Last Import selection in Photo Albums?
I've got a first gen iPhone on 2.0 and was wondering if it's possible to remove Last Import from the Photo Albums screen. I've checked for options in iPhone's Settings and in iPhoto's Preferences but haven't found anything useful.
Suggestions? Thanks.HI,
you will able to disable the group tree icon panel when the crystal report opened. to do this,follow the steps mentioned below.
1. Go to your BO installation folder and then tomcat folder and then choose the CrystalReports web application.
C:\Program Files\Business Objects\Tomcat55\webapps\CrystalReports
Now change the web.xml of the this web app and insert a context parameter
<!-- Added to remove group tree panel shown as default -->
<context-param>
<param-name>viewrpt.groupTreeHide</param-name>
<param-value>true</param-value>
</context-param>
Restart your tomcat, or restart crystal report web app from tomcat manager.
you can remove or add or disable the group tree icon as per your requirement.
Let me know if this works,
Regards,
Rameez -
Where can I find an older version of F/F browser for windows 7. When I downloaded the newest version, it, for lack of having to mention everything, just doesn't work. I've looked through all the fixes for this and that, but why, when the older version worked jus fine? I'd like to stick with F/F if at all possible. Please help!
Firefox 4.0.1 is available here - http://www.mozilla.com/en-US/firefox/all.html
Firefox 3.6.19 is available here - http://www.mozilla.com/en-US/firefox/all-older.html -
Possible Solution to the Restore/Not Recognized Problem
I FOUND THE SOLUTION!!!
...after hours of tech support ...from Bolivia
You need to reformat the iPod going through "My Computer" and using the basic Windows Reformat. Not the Quick Format. Then, open iTunes and a Restore option will be avaliable. Make sure that you have an internet conection to download the software. Should fix the problem. Good Luck!Second day and no freeze from sleep.
-
It is possible to script the last (hyphenated) word in a page?
With this method the checking of words in odd pages could be very helpful to improve the layout and avoiding the visual method.
Thank you.It seems the real place is
http://www.scriptopedia.org/index.php?post/reportPagesHyphen.html&navlang=en
But the script is reporting a failure...
Maybe you are looking for
-
I can understand that is not possible to see all the bugs, but this is kinda bothering me, because is not exactly a bug that require a lot of efforts at all....here we go, maybe you know about it so iw ould love to know when it will be fixed. format
-
Ipod touch stuck on apple logo. it appears then dissapears and so on
I was updating my ipod touch 4g from ios 5.1 to ios 6. I clicked update software. it said plug in to computer if battety dies. it is jailbroken When I came to this screen iplugged it out by mistake then the bar finished and came to a screen with the
-
Problem when closing Adobe Reader on firefox
Hi, normal windows in firefox can be closed using "Ctrl + W" But when i open a PDF on firefox (with adobe reader plugin) if i press "Ctrl + W" it ask me to close all windows... Why? Is there any way to resolve this? BYe [sig deleted by host]
-
How to hide fields on Repetitive Area Footer on the last page?
Hello, How can I avoid printing some fields on the last page, when this fields are on the Repetitive Area Footer, and the Repetitive Area Footer is defined to print on all the pages? I was hoping to do this with fileds linked to (ContinueNextPage) fi
-
Trying to export security, ExportSecurity.cmd fails , unable to find class
Our Version is hyperion planning 9.3.1 When I run ExportSecurity.cmd it fails complaining it cannot find class HspExportSecurityCmd When i look in HspJS.jar i dont see that HspExportSecurityCmd class. does anyone know what jar file that class is in s