Is it possible to HomeShare on 3rd party Apple TV?

I have set up HomeShare between my Mac and my Apple TV. However, I was wondering whether it was possible to HomeShare between my Mac and a 3rd party's Apple TV so I can show my photos on their TV?

Welcome to the Apple Community.
Only if that Apple TV is on your home network.

Similar Messages

ISO 3rd party Apple service provider in the Inland Empire

ISO 3rd party Apple vendor or savvy Machead who can take out a hard drive from an old MAC G4. Ideas anyone?

Can you be more specific about where you are? Our area (northern Idaho/ western Washington) is called the Inland Empire but I've seen other regions use the same moniker.
Also, G4s are newer than this forum covers and have their own fourm area full of PPC experts. I'm going to ask the Hosts to move your post to the PowerMac forums (assuming you have a PowerMac G4 tower or Cube, and not a PowerBook, iMac, eMac, iBook, or other G4 variant.)
The forum you found gets painfully little traffic.
Here are Apple instructions from replacing a hard drive that cover most PowerMac G4s:
http://support.apple.com/kb/HT1815

Dear Apple: Please Reinstate 3rd Party Apple Support for iPhone

Apple, since downloading and installing OS 3.1.3 for iphone I have lost all 3rd party app support. Please make a new OS update available as soon as possible, or allow those of us with issues and no previous issues with the old OS to go back to the earlier version.

Download any free App to your phone - it doesn't matter which. Then hold the Home Button down and press the top button until the red slider appears, but keep holding it until the phone switches off completely.
Wait a few seconds, then switch the phone on in the normal manner ... and it should be working okay now. At this point we hopefully say "taraaaaa .... its working again"

Importing 3rd party apple loops into loop browser?

i am running Logic Pro 8 and have recently bought a load of sample libraries. I have attempted to load them into the Logic loop browser with all the original logic loops for easy access. but only half of them show up in the browser.
If i check the library/audio/logic/apple loops folder, they are all in there as they should be, they are just not showing up on the loop library list inside logic.
Can anyone please help me?

You need to open Logic and click on the "Media" tab (upper right in your main window), then click on "Loops". You are now in the loop browser and this is where you have to drag and drop your loops for them to be found by Logic.

3rd Party Apple Loops folder hierarchy

I had a number of Apple Loop libraries saved at ~/Library/Audio/Apple Loops. When my internal MacBook Pro hard drive got full I moved the Apple Loops folder to an external hard drive. I then reindexed these loops by dragging the apple loops folders from their new home on my external drive (eg Jason'S External/Apple Loops/Brazilian Beats) to the Loop Browser in Logic Pro 8.
Now my loop browser just shows me the name of the whole sample library (eg Brazilian Beats) but no longer breaks them down in to the useful sub folders the library was previously organised in to when it sat on my internal drive (eg Brazilian Beats>Samba>130bpm)...it now just shows the Brazilian Beats folder in the Loop Browser View drop-down) and then I have to search through the 3000 loops in the Brazilian Beats library to find a specific loop I know falls in Brazilian Beats>Samba>130bpm
Is this because my loops have to be in my library folders for them to display this sub folder feature or are the loop libraries on my external drive not properly indexed yet and if so how do I rectify this please?

You need to open Logic and click on the "Media" tab (upper right in your main window), then click on "Loops". You are now in the loop browser and this is where you have to drag and drop your loops for them to be found by Logic.

FCP 7 freezes when loading 3rd party Audiofilters

Hi there,
as said in the subject, I can't get FCP 7 to run, because it freezes on start-up, while loading UAD audio filters. I can't even quit it then, only option is to re-boot the Mac.
Now I have two questions:
1) is it possible to de-activate 3rd party plug-ins in FCP, especially the audio ones? I never use them anyway with FCP...
2) is it possible to force FCP during the start to ignore any 3rd party plug-ins? Like starting Logic with ctrl button held down gives you the option to start with or without core audio. Ctrl button on FCP didn't seem to work.
Regarding the UAD plug-ins: I also have Logic 9 installed, together with a Powercore and 2 UAD PCie cards. All 3 work fine with Logic. And they did work fine with FCP (as described in the next paragraph), even though I never used them for video, so I'd be fine if de-activating is possible.
In detail:
This is a totally fresh system here, everything's installed from scratch just a few days ago, no copy&paste involved. I made a big mistake lately, upgrading to 10.6, which brought me tons of trouble, i.e. kernel panics with the Powercore card. Finally I simply removed my main hard disk, bought a brand new one, installed the original 10.5.4 system, run the combo upgrade back to 10.5.8 and installed all applications again.
Everything works perfectly, all audio troubles in Logic are gone, system works fine again, my CS4 suite runs smoothly and now I tried to start FCP for the very first time and .. nope.. Funny enough I get an UAD message telling me I haven't used my UAD plug-ins in a while and asking me to confirm my computer clock settings. After clicking ok FCP loads another 2 UAD plug-ins and freezes. Actually I did use the UAD plug-ins in Logic only 10 min before. All fine.
Regarding compatibility - FCP did work with UAD before I upgraded my system to 10.6. And it did work with 10.6. Only reason to go back to 10.5.8 was the Logic/Powercore drama. And yes, I did check user permissions, did re-boot with apple-alt-p-r, etc. etc.
So if anybody has an idea, what the problem could be or if there is a way to navigate around, i.e. avoiding the plug-ins, I'd really appreciate this!!
Thank you and have a great weekend,
Joern

Hi Nick,
thank you for the link, I downloaded the app but even though the concept sounds good, it didn't really work. When I try to de-activate any plug-in I only get error alerts.
But now I downloaded a new authorization file from UA, re-authorized and voilà - FCP is happy and running. Loading tons of plug-ins I don't need but back in business and running. Seems like I paniced too early.
Thank you,
Joern

Connecting 3rd Party via Saprouter

Hi experts,
is it possible to connect a 3rd party via saprouter to our sap-systems?
Or is it just possible to connect SAP to the systems?
I already found one entry in SCN, however there was also no solution provided.
Kind regards

Hi Christian,
To connect your SAP system a 3rd Party needs SAP GUI setup at their end & you can provide the sap router string to connect your system via SAP GUI.
For security purposes you can configure sap router string with password option(authentication to access SAP system),so that after confirming job/consultancy by 3rd party you just need to change the password under router string only in regards no one can access your SAP system/network.
Hope this will help you.
Thanks,

Set up email account through 3rd party app.

Can anyone tell me if it's possible to use a 3rd party email app on my 9300. The problem I have found is that the 3rd party app wants the incoming mail server and the outgoing mail server. I don't have that information, and when I asked vodafone, they told me tocontact Blackberry (and very kindly sent me a contact number for Blackberry, which didn't work).
Is it not possible in the UK to use third party email apps?

When you use a Blackberry only email address such as yours then you will find it very limited - you are only able to access it on your phone, there is no folder support etc.
You can use other email addresses like Google and Yahoo which will give you more support. For example Google will allow you to access your folders, sync you calendar and contacts. (note.. on folder support, only email pushed to your device once its activated are available on the handset when filed, though you can do a remote search of your inbox).
Yahoo will allow you to sync your contacts but does not give you folder access, however, it does do 2 way sync so when you file email on the web interface it will be removed from the inbox on your handset.

Is it possible for a 3rd party program to create a list item in sharepoint online 2013?

I have limited experience with the online version of sp. I've been asked if it's possible for a 3rd party app that our company is beginning to use, to programmatically add items to a list.    I don't have any details about the program yet,
but I've been told that a batch would run at night and they would like it to create items in a SP list and pass along several fields of metadata.
Is this possible in the online version?   I know that Power Shell can do this, but is it possible for an app to get access to run a PS command?
thanks,

Yes.
There is something known as the Client Side (?) Object Model or CSOM. This allows you to create list items, lists and even sites with .Net code from a non server machine.
You could run 'classic' Server Object Model C#/VB.NET or PowerShell to do the same job and it might be easier as there's alot more material out there on how to do it. On the other hand it's probably going to make your solution more complicated and
harder to maintain over the long run.
This article introduces you to the CSOM and how to use it and is applicable to O365 as well as on-premise:
http://msdn.microsoft.com/en-us/library/office/fp179912%28v=office.15%29.aspx
As an alternative you can look at the REST API which allows you to use web services to interact with SharePoint.
http://msdn.microsoft.com/en-us/library/office/fp179912%28v=office.15%29.aspx

Possible to send files to 3rd party program?

I'm trying to add a "Send to Flickr Uploadr" context menu to bridge, but I've hit a snag in getting the files to the Flickr Uploader program. I've tried using openWith(), but i don't think that it does what I want it to do. But the documentation on openWith() is a bit sparse. If openWith() is indeed the wrong method to use, what is correct way, or is this even possible? Thanks. here's what i've got so far... // path to flickr uploader flickrPath = "/C/Program Files/Flickr Uploadr/Flickr Uploadr.exe"; // only have 1 instance of each function checkEl(w){ > var menuEl = MenuElement.find(w); > if (menuEl != null){ > MenuElement.remove(w); > } } // send selected files to flickr uploader function send2Flickr(f){ > fName = app.document; > for (i=0; i<fName.selections.length; i++){ > files = new Thumbnail(File(fName.selections[i].path)); > files.openWith(flickrPath); > } } // check to see if the menu items exist, and remove and recreate if they do checkEl('send2Flickr'); // right click context menu var cntCommand = new MenuElement("command", "Send to Flickr Uploadr", "at the end of Thumbnail", "send2Flickr"); cntCommand.onSelect = function (f){ > send2Flickr(); }

Not all 3rd party software will respond to the commands Bridge sends it when you do openWith. Off the top of my head I'm not sure if openWith ends up sending a BridgeTalk message or some flavor or operating system or message or event (or both), but if you can get the 3rd Party application to open the file using the Bridge UI's File > Open With menu item, then I'd expect scripting's openWith to work as well.
One workaround you can try is the command line. If the third-party software has a command line interface, then you can try using app.system() to issue the commands. It's possible (on both Mac and Windows), for example, to run the DNG Converter from Bridge this way, and this is how the ExportToJPEG's "Send To Flickr Uploadr-Mac.jsx" sample script runs some AppleScript that tells the Mac Flickr Uploadr to open files. I believe that the Windows Flickr Uploadr has a command line interface, so you might try something like this...
// Make a file Object using the known path to the uploadr
var command = "\"" + uploadr.fsName + "\" \"" + fileToUpload.fsName + "\"";
app.system( command );
Note that you usually have to quote paths to files for this to work all the time. Also note that app.system() will block your script until the command returns. Finally, when I've used app.system() on windows in the past, sometimes a command that seems to work just fine from the windows Console doesn't seem to do anything via app.system(). In those cases I've found that witting out the command to a temporary .bat file and then sending the path to the .bat file to app.system() does work.
I know that I've tried before to run Flickr Uploadr windows this way from Bridge, but it was months ago, and I don't recall all the details. My recollection is that it basically worked, but the user experience was a bit clunky because of the modal behavior and because a Console window appears on the screen as the commands run, and I had to quit the Uploadr manually after upload to move on. If you are a clever windows batch file scripter (I'm not) maybe you can workaround those issues.
-David

Possible to control 3rd party plugin/palette?

Is it possible to write something (JavaScript/COM programming/plugin) that has access to a 3rd party plugin/palette? I'm talking about XMPie uDirect. XMPie doesn't offer an official API for the plugin but I want to invoke a special action automatically that can be accessed only by the plugin's InDesign palette. I want some kind of automation.

This won't work, sorry. The palette cannot be controlled through the menus... except showing/hiding it.
I got the same idea with system events. It would be great to have a program that sniffs system events and gives information when I press a special button in the InDesign palette. The 3rd party plugin should be a kind of library like DLL that exports functions. Does anybody know a program that can monitor InDesign.exe with all its sub-processes, DLL handles and called DLL functions?
[Edit:] I tried a DLL viewer which can open and show XMPie's plugin files XMPBackEnd5.apln and XMPFrontEnd5.apln (APLN = InDesign PlugIn). They seem to be normal DLL files. If anybody knows the secrets of "decrypting" DLLs it would be nice to know if this can help me. I need to invoke the plugin's commands for XMPie's "Dynamic Print" (new dialog opens) and then just confirm with "OK" to start the export.

Would it be possible for time machine to back-up files from 3rd party software such as windows platform using parallel?

I'm wondering if it would be possible for time machine to back-up files from 3rd party software such as Windows XP using parallel software especially if it is isolated from mac? Any advise would be greatly aprreciated.

Short answer - yes Time Machine will backup everything within the Mac OS system.
Longer answer - Parallels creates a pvm disk image "Parallels Virtual Machine" which Time Machine backs up.
Due to the changes to the pvm file Time Machine is unable to read the minor changes and will somtimes do a full backup of it each time Time Machine runs and can chew through Back up drive space quite quickly.

Is it possible to Archive all Lync IM and Conference direct to a 3rd party archive?

From what I gather, IM messages and Conferences can be sent to a Lync Archive. From there a shell script to export to .eml is possible.
But is it possible to Journal direct from Lync, upon conversation or conference completion - or after a set time period - a transcript as an email to any 3rd party location [say, a 3rd party archive system]? Exchange does this
very well indeed. So it would be most useful if Lync did too.
Any Video and Voice recording Files should either be included as attachments to the transcript
or as URL type links to the files in the Lync store.
Given the limitations of the Lync Archive (no search etc. plus the extra setup and sql license) this alternative approach seems very sensible.
And if there are no built-in methods to do this, then is it technically possible to achieve with some .Net skills?
Merlin Beedell

Ah Yes, thank you - I can see the Folder in my Outlook - "Conversation History". The items are of type IPM.Note.Microsoft.Conversation.
It does reference file transfers in the conversation:
[11:40]
You asked to send "188836.mht" to RTuveri.
[11:40]
"188836.mht" was transferred.
[11:40]
persleff.txtwas saved to C:\Users\mbeedell\Documents\My Received Files. It's a good idea to scan the file for viruses
before you open it.
But when a voice/video call is made, it does not include much detail (duration or url link to the saved transcript):
Merlin Beedell
[11:42]:
Am
trying
the
video
conference!
[11:42]
Connected to RTuveri ([email protected]).
Renato Tuveri
[11:42]:
can
you
see
me?
So better - but from a compliance point of view, this may be an incomplete record. Is it possible to improve on this?
Next - to see what format of address information is recorded when connecting with non-Active-Directory [external / anonymous] users.
Merlin Beedell

Is it possible to add a community calendar to a website created in Muse & hosted on BC without resorting to a 3rd party widget?

I need to add a searchable community calendar or events list to a website created in Muse & hosted on BC.

Many thanks, but it's not quite what I'm after.
I need something that let's a 3rd party submit an event which is then submitted for approval by an admin.
I have found this which at the moment is in free beta.
Tockify | Create a Web Calendar or Event List for your community

Is it possible to extract vacacy created in Global HR or provide a link to 3rd party system on vacancy card?

Hi,
We have a client requirement either to extract vacacy created in Global HR or provide a link on vacancy card to 3rd party system ?
Regards,
Manoj

Generally integration would be done using web services, the available web services are documented in OER. I am not familiar enough with HCM functionality to comment on the specific feature, I will ask a colleague to comment.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Is it possible to HomeShare on 3rd party Apple TV?

Similar Messages

Maybe you are looking for