Is it possible to hyperlink to a specific point in a video?
I'm trying to create a DVD-style menu page within keynote.
Ideally what I'd like to do is have a video on 1 slide and then create a series of hyperlinks on a menu slide that would hyperlink to specific points within that video.
Anyone know if this is possible?
You could use iMovie to split the video clip into each section as well. Do you need the option to play the entire video clip from start to finish? If not, you can have each video clip be its own Keynote file and have Hyperlinks to each individual Keynote and then there will not be one large file, but multiple smaller files. This of course will not work if you want to play the movie straight though.
Similar Messages
-
Let a name following a specific point in a video
've looked everywhere but found nothing
is there any way to place a text and let it follow a specific point in the video ?
example, I place a name in text above a certain person and this name will following the person
Search everyway but cannot find it
thanks !that is simple done with a 50$ investment to Motion5 ...
which offers a Tracker.
have a look (quick'n dirty test!): -
Hyperlink to a specific point on a page
I am trying to insert a hyperlink which jumps to a specific point on a page. The way I would like it to work is so that I have a list of headings - an index - and when you click on a heading it jumps to that particular chapter in a text.
So far I have only been able to get a hyperlink to jump to the top of a page.Anchor
Search is your friend -
Moving video playback to a specific point in a video... impossible?
So watching a full length movie on my 2nd gen touch. Say I want to skip to the 1:27:30 mark, but trying to move the video position slider to that spot is a lesson in insanity. For a big movie like this, you end up with 10 min chunks before or after where you want to be, and no way to fine tune it.
Am I missing the secret step here? It was so much easier on my nano with the wheel.Hello and Welcome to Apple Discussions.
You're not missing a step. The iPhone and +iPod touch+ don't handle scrolling through long media files well. I've left feedback countless times... but perhaps if a few more people did...
http://www.apple.com/feedback/ipodtouch.html
Best regards
mrtotes -
Is it possible to restrict access to specific IOS apps based on the WIFI profile that a user has connected to?
you might be able to block it if the app uses Internet access
and depending on your wireless you might be able to block a specific user
accessing the backend host that the app uses
some firewalls offer application filtering but I'm not aware of any that work with ios apps -
How to create a hyperlink to a specific page in a pdf
How can I create a hyperlink to a specific page in a pdf, that is saved on a local drive? If anybody knows the answer, please email me back at [removed]
Your help will be greatly appreciated.You need the original Adobe Acrobat to edit PDF files. The free reader is just for viewing
http://www.estello.se -
Is it possible to start JSON Service specific to the user session?
Is it possible to make JSON service to start different sessions of BusinessLogic Code in short - Is it possible to start JSON Service specific to the user session?
Here is what I'm trying to do. I have a created a Configuration Model which contains the business logic. I want to start this model as a JSON service, and the user will interact with this model via mobile App developed using ADF Mobile. The JSON sevice has two calls
/startConfiguration/{model_id}
/getConfiguration
Both of them return the string that indicates the BusinessModel being started by JSON service.
When invoked " /startConfiguration/{model_id} " from two different browsers (Chrome - started first, FF - started second) for the same model_id (simulating the scenario of two user accessing same model), it did returned two different 'configuration' object strings, indicating that each call started its own Configuration.
However, when I validated that the session started is user specific by calling "/getConfiguration" it return same 'configuration object string - which is the second call from FF. Thus indicating that I cannot have JSON service tied individually to each user session.
My goal is to have JSON service specific to each user session. Is this possible?Hi,
what is a JSON service? JSON is an object notation used with REST services. So I assume you have a REST services that returns JSON and you now want to obtain the same identifier for a specific input string? REST services - like all Web Services - are stateless and if you want to associate a request with a specific context then you need to pass a token or similar with the request so the context can be re-established. In your case I would have a look at the code mapped to startConfiguration/{model_id} to verify if the method checks for an existing configuration with the provided ID. Chances are that its the code returning the wrong ID. In general I would go with a token approach.
Frank -
Is there any way to jump to a specific point in a long page?
I'm trying (and failing) to find a way to create a navigation bar at the top of a long page that will allow you to jump to certain sections of that long page. I've tried using relative navto:// links, and hyperlinking to text anchor points, but nothing I try seems to work. Can anybody help? Is this even possible?
In Smooth Scrolling articles, you can use decimals or percentages to jump to a specific position.
Example: navto://myarticle#3.3 (jumps to a specific position in smooth scrolling article that displays the bottom of page 4 and the top of page 5)
Example: navto://myarticle#50% (jumps to the middle of smooth scrolling article) -
Rotating an object about a specific point!
Hello Guys!
Have a new Problem!
I want to rotate an object about a specific point. But up to now i only can rotate something about the x,y,z axis!
Is this possible to rotate a scene about the point 1,1,1?
Transform3D rotation = new Transform3D();
rotation.setRotation(new AxisAngle4d(-x, -y, 0,((Math.PI / 2) - angle)));
I don't handle it with Alpha because i needn't an animation!
Please help me!
QuhHello,
to rotate an Object A about the Point P you have to do the following:
1. Get the Transform T which transforms P to Point (0,0,0)
2. Apply T on A
3. Rotate A (around (0,0,0))
4. Transform A with the inverse of T
leha23. -
Loading an animation at a specific point in the timeline?
Hello,
I am trying to find out if it is possible to start/load the animation based on a specific point in its timeline? The animation I am creating is a parallax animation based on mouse position and I am trying to load it in the middle of the animation and based on the users mouse position will play forward or backwards from that point. Is this doable?
Thank youHi, Bullvinne Designs-
What you'll want to do is to stick some initialization code into the compositionReady event from the stage. This will execute after the runtime loads and before the user sees the stage.
Thanks,
-Elaine -
On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed
Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You -
How do I move video clips to specific points on a music track in iMovie?
I am trying to make a lip synch video and need to move my video clips to specific points on a musci track so that the words are in time with people singing - does anyone know how to do this? At the moment, I only seem able to put the clips in one after the other...
Hi
IMovie is Video clip oriented - meaning that Audio can not be put in first and video/photos added later.
So to do this I use black photos that I fill up the Video with first
Then Add audio
Then add Video/photos by Cutaway function or exact replacement (in time).
This is so much easier in any version of FINALCUT where one can build Audio first then create the video ontop of this.
Yours Bengt W -
Hi all,
Please let me know the process to track or find all the SAP Standard and custom objects. that got changed from a specific point of time.
Is there any function module or any table where this change log is maintained.?
I just only need the details ,wheather that SAP standard or Custom object has got changed or not.
Thanks in advanceHi RK v ,
I really don't know what your actual requirement is , but if you want to know the objects as per the modification , then transport request will be much help to you .
Have a look into table E070 and E071 .
Regards ,
Yogendra Bhaskar -
QuickTime: can't move to a specific point when playing .WMA audio files
I use a lot of .WMA audio files recorded on my Olympus Digital Voice recorder. Since the latest update of QuickTime I cannot move to a specific point in a file. When I click and drag on the diamond cursor it won't move. The only way to move through the file is to play it or 'fast' forward it - which takes ages.
I have the same problem. when playing wma or wmv file, simply just cannot drag the progress bar to a specific position. Just have to progress from the very beginning to the end. Once it has been played to the end, I can move the progress bar. Very weird
I have both flip4Mac and perian installed with the latest version.
Could anybody please help.
cheers -
How to rewind to a specific point?
I have a 30 gig. Ipod on which I like to listen to audible.com books. I just got a new Nano. On my 30 gig Ipod, I can rewind or fast forward to a SPECIFIC point of the book, not just to the very beginning or to the end. I can't seem to do this with the Nano, which allows me to go only to the very beginning or to the very end. What am I doing wrong? Thanks so much in advance.
Whilst listening to the audiobook, and the iPod is in the 'Now Playing' screen, press the centre button once. A small diamond will appear in the time scroller ad the current time point. Just use the scrollwheel to get to the time where you want to listen to.
Hope that helps
Maybe you are looking for
-
After updating my fire fox to 3.6.3 I now cannot click on links into a new tab it will just open a blank tab, after hitting refresh, nothing happens. But when clicking bookmark link it will open in new tab as wanted but will not load unless I re-clic
-
How to remove "other" in iPhone storage
I can see when I look at what is on my iPhone a category called "other". What is it and how can I remove/reduce it, as is taking up valuable memory/storage?
-
Macintosh HD Library did not migrate. What else is missing?
I recently migrated to a new (identical) MBP Retina with the same OS 10.9.3 and chose to migrate everything. When I compared the two computers, I noticed the new one had about 30 GIG less than the old one. I went through with a fine toothed comb and
-
Are apple working on a fix for iTunes in the cloud in ios6?
After updating to ios6 I've been incredibly frustrated with iTunes in the cloud. Gone are the options of downloading and deleting individual songs and the service has gone down the streaming route. I can understand how this benefits some but it is a
-
I need to connect a eMac - power mac 6,4 -PowerPC G4 (1.1) to the internet wirelessly running mac osx 10.4.11. Can anyone advise me please. I have done some research and think a USB adapter is the best option as I doubt the eMac will be able to take