Is it possible to implement only customs without compliance and risk?

Hi guys,
is it possible to only map the proforma invoice from feeder system to GTS without mapping the sales order and delivery.
If yes, then kindly guide me.
regards

Technically it is possible to do this.  Balazs is on the right track with SD0C.  However, you may see blank fields on the export declaration because some fields pull data from the delivery document ('expord') that is in GTS instead of pulling all from the feeder system.  Also, there are 'General Settings' in GTS that you must still configure to enable the legal regulations and document processing.
As a former export compliance officer, I must also mention that this is risky from a compliance point of view.  It is a great risk to the company to process export declarations in GTS in order to generate forms (or AES messages) for customs purposes without having a robust compliance program to assure legal control, SPL and Embargo compliance.
From cost perspective, it also does not make sense to spend time/effort configuring GTS to perform export or import functions while not employing compliance functions as well - unless there is a robust external system handling those functions.  Even then, I would bet that it makes economic sense to bring all those functions into GTS.
Regards,
-Greg

Similar Messages

  • Is it possible to create a customized TV schedule and have it e-mailed to oneself

    I don't subscribe all channels, of course, but I do have 3-month access
    to some movie channels.
    Is it possible to create a sort of customized daily grid (program guide) of the premium channels to which I have
    access by specifying the channels and have it e-mailed to me daily?
    (As far as I know Verizon doesn't publish a program guide)

    I am not aware of any capability to do what you want. Interesting idea though.....
    What I do when they have a free preview of some channels is put them into Favorites 2 on the STB; since I don't normally use a Favorites 2, when I want to watch one of those channels, or surf them, all I have to do is switch the Guide to display Favorites 2 and take a look. And when the free preview is over, it only takes a few button pushes to go into the Menu on the STB and delete the entire contents of Favorites 2.
    Not what you asked for, but if you don't normally use your Favorites 2 for anything it might help a little.
    Justin
    Verizon FiOS TV, Internet, and phone
    QIP6416-P1, IMG 1.8, Build 02.54
    Keller, TX 76248

  • I've just found a possible solution to insert equations, without latex and images.

    I've just found a possible solution to insert equations, fractions and other types of mathematics characters in Pages for iOS, without latex, etc, only I've used Pages for iOS. Without inserting images, only with Pages and tools and symbols that are not images! Take a look at this document from Pages made with the iPad Air.

    Xcrius wrote:
    I don't know how can I post and upload a Pages document here. Any suggestion? 
    Yes, use the camera icon to upload a graphic of your document.  Also explain your solution right here instead of asking people to send you their email address, which is often not a good idea.

  • Is it possible to create a custom control class and insert its instance in a form?

    I have several controls that will work togheter and in a similar way in several forms.
    For example, a GroupOption with two ButtonOptions. Clicking on one button option the frame willl  became higher and a TextBox will appear; clicking on the other the TextBox will disappear and the frame will shrink again.
    I need them in different size or few other propieties but the basic funcionality are the same.
    I was thinking to create a Class with all the built in Controls and the relevant methods and propieties to keep my code clearer, simpler and reusable.
    But I don't know if my idea viable.
    After creating a simpler version of the class; I was trying to put it at work in a test form but I could not find the way to insert it.
    I've only find a Application.CreateControl with a required parameter
    ControlType which ranges only over built in controls not custom one.
    I'm working in VBA with Access 2007 and later.
    Thanks for your advice.

    That is not really practical with Access. For example CreateControl does not work with compiled applications, which is how you should deploy them. Also the level of modularization you desire just is not available. Maybe a subform would come close to this,
    but I would HATE to work on one of your apps if you build each form with a collection of subforms.
    While you can and should re-use code using modules or class modules, not so much for UI elements. More advanced development environments like WPF can do this.
    -Tom. Microsoft Access MVP

  • Without DP and SNP imple, If it Is possible to PP/DS imple

    Hi gurus,
    I am new to steel project, Without DP and SNP imple, If it Is possible to PP/DS imple, what is the process steps, how it is possible can u explain elaborate.it is a very helpful for me.
    Regards,
    prasad

    Prasad,
    Yes, It is definitely possible to implement PP/DS, without DP and without SNP.
    SAP Best Practices has guides to help you.  You didn't actually mention any business processes you wish to implement, so I will just give you the four basic builiding blocks you will need.  Depending on what you will be doing, you may need more.
    Connectivity
    http://help.sap.com/bp_scmv250/BBLibrary/HTML/B02_EN_DE.htm
    Data Replication
    http://help.sap.com/bp_scmv250/BBLibrary/HTML/B05_EN_DE.htm
    Production Planning
    http://help.sap.com/bp_scmv250/BBLibrary/HTML/S16_EN_DE.htm
    Detailed Scheduling
    http://help.sap.com/bp_scmv250/BBLibrary/HTML/S18_EN_DE.htm
    In addition, you can refer to SAP online help at
    http://help.sap.com/saphelp_scm70/helpdata/en/bd/147a375f0dbc7fe10000009b38f8cf/frameset.htm
    Best Regards,
    DB49

  • Customer without company code

    Hi,
    is there a possibility to change a customer without a company code ? ( in an automated way ). Our current batch input program does not pass the first screen ( message "enter company code" ).....................
    thanks,
    Rolf

    hi Rolf,
    I guess you have to untick the checkboxes for company code data (Payment, Correspondence, whatever...) on the first screen of the maintenance transaction (either FD02 or XD02). Just run the BI session in mode A and you will see!
    hope this helps
    ec

  • Nokia 206, Custom welcome message and ringtones?

    Hi,
    Is it possible to add a custom welcome message and custom ringtones to this phone? My wife had a Nokia Music Express 3330 (I think that was the model), the phone before last, but it went faulty. She had her own welcome message and a few custom ringtones.
    If it is possible, how would I go about doing it?
    Phone only arrived today.
    Thanks,
    Gerald

    In the menu under settings is 'phone'. in there is the start up alert tone function. you can adjust this to off.
    Im not sure if you can turn off the other tone alert mentioned in your posting.
    Nokia Lumia 520
     iphone 6 Plus.
    Be happy !!

  • Vendor/Customer Account Group and Master Records

    Hi Gurus,
    Please tell me during implementation Vendor/Customer account groups and Master Records will be prepared by FI Consultants or MM, SD Consultants?
    Waiting for reply
    ThankYOu

    Dear Verma
    It is the usual practice that FI consultants should prepare Account group and also maintain General data and Company code date in Vendor/Customer masters. SD and MM consultants are informed by FI to maintain Sales and Purchase organization respectively by SD and MM consultants.
    If this helps please reward with points.
    Best Regards
    Kesav

  • Is it possible to download photoshop only? Without the creative cloud app?

    Is it possible to download photoshop only? Without the creative cloud app?

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Is it possible to implement iSupplier Portal for Employee type Vendors

    We have iSupplier portal for external suppliers which we customized to show only invoices and payment advices.
    Is it possible to implement the same to our internal employees without creating them as new suppliers ?
    We want employees use iSupplier portal to view their expense(payments).

    If you are using presentation API then as Nagarajan said, you can use Endeca Dimension Search to power your TypeAhead/Predictive search.  Below are a few pointers that may help.
    Trigger typeahead only after user enters a few characters (ideally after 2-3 characters).
    Introduce a delay of a few milliseconds between your Endeca Searches.
    Limit the Dimensions to include using the Di parameter.
    Control the number of dimVals returned and other Dimension behavior using Drc and Dp
    Use Drc (to evaluate InStock products) in a seperate query with D=* to get a list of all valid DimVal IDs. Cache them and use this list to remove any out of stock dimVal IDs from the real query results.
    Use Dk and Dx to control match mode and your relevance ranking strategy to sort your results.
    Oracle Commerce Services also offers a prepackaged service called Endeca Predictive Search (EPS) module that can be quickly implemented to power TypeAhead. EPS provides other configurable features like caching, record search, frequent matches ,etc.  Reach out to your Oracle representative if that intersts you.
    All the best! I hope this helps.
    Best,
    Kaush
    P.S. Google limits the search result to 4 which, works for them and might work for you but to exploit the full potential of Predictive Search based on Endeca, try HomeDepot.com, Staples.com, etc. for inspiration.

  • Is it possible to create info record without material number

    Hi all,
    Is it possible to create infor record without material master and what is the importance of the field Info update in PO.
    Thank you for the help.

    Hi,
    1.Yes you can create Info record without material no. but you have create it for material group.Go to ME11 and only enter vendor ,Purchasing organization , and Plant don't enter material no.. and again enter maitain material gruop and require data for Material group.
    2.Info Update indicator -
    Info record update
        Determines whether the prices and conditions of this purchase order ite
        are suggested in future PO items.
    Use
        Selecting InfoUpdate causes one of the following situations to occur:
            -   If just one info record (with or without plant) exists, it is
                updated.
            -   If no info record exists and "plant condition requirement" was
                specified in Customizing, an info record with plant is created.
                Otherwise, an info record without plant is created.
            -   If two info records exist (that is, one info record with plant
                and one without plant) the info record with plant is updated.
    reward if helpful,
    Regards,
    Chetan.

  • Creating customer without maintaining common distribution channel and divis

    Dear all...
    can anybody tell me how to create a customer without maintaining common distribution channel & division..
    sathsdn..

    Hi
    Welcome to SDN
    Not possible
    Because whenever you are going to create customers /materials or conditions for a distribution channel the system is going to check the reference distribution channel in VOR1 (whether any entry is there) and will accept when there is entry there only
    Similarly
    Because whenever you are going to create customers /conditions for a division the system is going to check the reference division in VOR2 (whether any entry is there) and will accept when there is entry there only
    Without configuring VOR1 and VOR2 creating master data is not possible
    If you dont want to havecommon distribution channel or division keep the same as common
    Suppose in VOR1 for 1000,10 if you have to define  common distribution channel then you can maintain as Ref DC customers /materials  as 10 (the same) and Ref DC for conditions as also 10 (the same)
    Regards
    Raja

  • Is it possible to install Fireworks CS4 without other "hang-on" programs?

    Hello gentlemen,
    The question at hand is simple indeed;
    Is it possible to install Fireworks CS4 without other "hang-on" programs? Especially Bridge CS4?
    See the problem is were running version cue cs3, and we simply cannot shift to cs4, cause VC CS4 is not recognised by bridge cs3. Hairy yes.
    Some of us need ONLY fireworks cs4, cause its miles better than cs3, but it automatically installs bridge cs4. And this kind of sucks, cause
    we cant use the cs3 version cue server after that.
    Big thanks for your answers!

    leetspeek wrote:
    really noone doesn't have a clue?
    I don't remember my installer program that well, no. I don't remember if it was possible to de-select Bridge. Did you try custom install to see? What have you tried?
    It's possible to remove Bridge....
    This search http://www.google.com/search?hl=en&rlz=1C1GGLS_enUS291US303&q=uninstall+adobe+bridge&aq=f& oq=&aqi=
    Brings up this Adobe TechNote article as the first item:
    Manually remove Adobe Bridge (Windows) http://kb2.adobe.com/cps/328/328358.html
    Have you tried removing the unwanted version and then, possibly, installing/repairing to the old?
    If you're uncomfortable editing your registry, then WinASO has a good registry cleaner: http://www.winaso.com/ (That's for Windows. Don't know how Macs do things.)
    Other than that, I suggest you contact Adobe Support.

  • Same Custome HR infotype twice once without namespace and with namespace

    Hello all i just want to know can we create same custom infotype (eg 9060) two times once with namespace (eg /companyname/9060) and also withoutname space (eg 9060).
    those who dont know what is namespace, we can reserve a namespace in accordance with SAP so that we can develop all our development component in ourname space instead of initiating with Z or Z. it starts with "/"  (eg "/namespace name/ object name")
    I tried it but Infotype attributes are same for both infotype but i have different other components eg. DDIC structurea and table name and screen name. i also tried to see in PA30 after creating it but it not able to see 2 infotype infact 1 only.
    So my question is it possible to create Custome infotype twice once without namespace and also with namespace???
    Any reply will be appreciated.
    Mani

    Well i am able to create two infotype component but when i am trying to access them then i am getting on first on. explaination below will give  u more light
    Infotype without namespace : 9060
    other component:
    P9060
    PA9060
    PS9060             
    etc
    Infotype with namespace : 9060
    /namespace/P9060
    /namespace/PS9060
    /namespace/PA9060      
    etc      
    But i dont need frontend of infotype so i am still confused can i go with this or not.
    the requirement arises as we developed an package previously with infotype without namespace but ow we have our own namespace and want to transfer all the stuff to our namespace.
    Mani

  • Is it possible to backup my iPhone without getting into the phone?

    I have a white iPhone 5c 16GB. It's my second time owning one, and the current one I have is from Asurion insurance company. I have heard those have been refurbished, so when I received my current phone I felt like it had already been old. iPhones don't have long life spans, for one. I would drop it a couple times and the edge of the screen would pop out but i would just push it back in using some force. Another problem it had is that it would die even when it had about 30% of battery left. Earlier today, it did the same. Trying to get my charger, the phone accidentally fell off of the bed while it was dead. As usual i check for cracks or the screen popping out and that didn't happen. I charged it and when i tried going on my phone I was only able to use half of the screen. The other half was covered in those lines that appear when the screen is damaged. My immediate reaction was to plug it into my laptop to backup the phone before more damage happened to the phone but I had procrastinated on updating itunes. It took about two hours for iTunes to completely download. Meanwhile the screen had just completely failed on me showing only the colorful lines, but i was still receiving calls and the phone could still vibrate, i just couldn't see or check anything at all. Once i was going to back it up, itunes said my phone was in recovery mode and that i had to restore my phone. I have precious photos that i want to keep when i get a new phone. Is it possible to backup the phone without using itunes and just using icloud? its saying my phone is connected yet im unable to see any proof of that other than the sound my laptop makes when i plug it back in. Also, if that doesn't work or is not possible, will i be able to just stick my sim card into a new phone and will i be able to keep my data?

    That's what I figured. When i go on icloud it shows the bar of the storage, and since i havent purchased extra, i only have the free 5gb. in icloud the bar shows the amount ive used and it says "backup" on the bar. It's not a link it's just a label. Does that mean it's backed up automatically on icloud?

Maybe you are looking for