Is it possible to import a new hierarchy into an existing version?

I want to add a new hierarchy to an existing version . Is it possible to do via import process?

The import process by definition always creates its own version. The process to incorporate a new hierarchy int an existing version is as follows:
1. Create the IMPORT and run the import into a new version that you specify.
2. Validate that the hierarchy in the new version is as you want it.
3. Create a BLENDER and run the blend using the new version as the source and the version you want as the target. Make sure you blend the properties that you created during the import process as well.
4. Validate that the BLEND was successful into the working version you wanted it to go and that the properties and structure are as you want them.
5. Delete the new version you created in steps 1&2 above.
Following these steps will incorporate the new hierarchy into whatever existing working version you want.

Similar Messages

  • Is it possible to make is so that, immediately after I import a new clip into FCP, the file is automatically selected in the Event Library? (Similar to how After Effects and Premiere work).

    Is it possible to make is so that, immediately after I import a new clip into FCPX, the file is automatically selected in the Event Library? (Similar to how After Effects and Premiere work). Right now, after I import a new file, I have to then go searching for it amid all the other files in my project. It would be extremely helpful if the file I just imported was already highlighted and selected after import, making it instantly "locatable" and ready to go.

    Kryan73 wrote:
    …  after I import a new file, I have to then go searching for it amid all the other files…
    in a perfect world, you do know the recording date, and you simply scroll to that date.
    in a very perfect world, all your other imports are already tagged, so just have to create a smart list 'unrated' ...
    (I know those messy Events… a friend of mine constantly ignores my advice to check the time/date on his camera; on every battery swap, the cam creates a very erratic timestamp ... his actual recordings are listed as made in "2004" or in "2020" .... )

  • Is it possible to import a pdf figure into Keynote for iOS?

    Hi,
    I was eager to use Kynote on my new iPad Air to make some presentations. But I use a lot of vector graphics in pdf and eps format for my figures. I found out that it is not possible to import such file format into Keynote for iOS. I understand that .eps might be quite outdated already and will never be supported but pdf?!
    It would be best if I could insert my figures directly from Dropbox but since this doesn't seem possible I would be happy to download my pdf figures to iBook for example and import them from there. This doesn't seem to be possible either. Keynote allows me only to browse my photos and it is not possible to put pdf files in Photos.
    Overall - big disappointment from Keynote for iOS to me. It is unusable for my needs and preferences.

    You can import pdf's in keynote!
    Make a pdf with Indesign or something like that. Make sure your pdf has the same resolution as your Ipad: For example, Ipad Air: 2048 x 1536 pixels. (In Indesign, you'll have to create a doc with intent Web (instead of print).
    Then, use a file manager app, like File Manager Pro (https://itunes.apple.com/NL/app/id558270538?mt=8&affId=2083450) to copy the pdf's to your Ipad by using WIFI.
    In the app File Manager Pro, just select your pdf and copy it.
    Now start Keynote, create a new presentation and create a blank sheet.
    Now you can paste, and your pdf will appear, transparant and exactly the same size as your presentation.

  • Dear Team, Can we secure "sent msg" that the receiver cannot edit while forwarding/replying? Is possible to import .PST file(S) into thunderbird?

    Dear Team,
    Can we secure “sent msg” that the receiver cannot edit while forwarding/replying?
    Is possible to import .PST file(S) into thunderbird? If yes, any size limit?
    Can we convert thunderbird data file in .PST?

    I don't think you can prevent email body text from being copied and edited.
    You'd probably need to created a protected Word or PDF document, and send it as an attachment.
    This is still some sort of guessing because it's still not clear to me what exactly your scenario is.
    Whatever text you send in an email, regardless of whether in the body or as an attachment, the recipient will always be able to use that and distribute it further, e.g. by making a screenshot. And images can be 'photoshoped' as well.
    If you want the recipient to be able to detect whether a message or an attachment has been altered on transit, you'd need to sign it.

  • Is it possible to import bookmarks from Firefox into Safari?

    Is it possible to import bookmarks from Firefox into Safari?
    If so then can someone tell me how it is done?
    Thanks,
    Steve

    Hi Dimaxum,
    I don't seem to be able to see the archive selection within Safari.
    I found the import/export bookmarks under ,file> withing Safari but that just opens a browser box and I have no idea where to browse to to be able to find the firefox bookmarks.
    Can you give me a step by step procedure?
    Really appreciate it!
    Steve

  • I imported a new font into keynotes, but shows as Lucida Grande

    Ok, so I imported a new font to be used in my keynote as part of our companies profile presentation (Brush Stroke). It was imported, and shows in Font Book, as well as the font selector in keynote.
    However, everytime I select it to change the current font from whatever it is to Brush Stroke it always appears as Lucida Grande??
    Any help? Am I missing a step? Did I do anything differently?
    Thanks!

    Did you use Font Book to install the font correctly (file > add fonts) ?
    Use font book to validate the Font    file > validate font

  • HT4637 Isn't it simply possible to import a new font??

    I have tried at least 10 times to sync the Geogrotesque font (we use in our company) via iTunes, but it won't work..
    I bought the ipad exactly so that I could use it for sales while on the street, showing my keynote presentation on it from icloud. But keynote changes my font and screws up my presentation.
    Ridicoulous that I can use Geogrotesque in keynote on my macbook, but apparently not on my ipad...
    Hope for your advices. This problem is driving me mad..
    BR Erland

    For everybody who is sick and tired of not being able to use custom fonts in their documents on their iOS devices I might have a solution.
    I ran into similar problems and took this as my motivation to develop "AnyFont". With this little app you are able to install all the fonts you need for your presentations on your iPhone or iPad. So when your are using Calibri in your presentation and get the error message after importing it on your iPad you can use AnyFont to install Calibri on your device which makes the error message go away and lets you use Calibri in your presentation.
    Let me know how you like it!
    https://itunes.apple.com/us/app/anyfont/id821560738?mt=8
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    <Edited by Host>

  • IX4-300D how do I import a new drive into RAID 5 Array?

    I already had a 3 x 2TB RAID 5 array, added new forth drive (same 2TB drive model) and let it auto format, which completed OK, but when I look at Status in Admin I see "Unallocated 1.8TB". This tells me the drive was formated but not imported into the Array.
    Looking at Drive Management Page it shows all four drives installed but offers no actions, you cannot even select a drive to display or take action on.
    Going into Settings only shows the settings I used to create the RAID 5 initially, no other options. I would expect a workflow of right click new drive and select to import into RAID 5.
    Looking in the help section no detail on RAID only a basic comment on what RAID is.
    Something badly missing here. Is there some info I have missed?
    Peter

     Hello 2Old2Slow
    I highly recommend that you do make plans to backup your data from the unit before attempting to expand the RAID just in case something goes wrong in the process.  
    When trying to expand an existing RAID 5 from 3 to 4 disks, you can use the "add disks to storage system" option that is located in Drive Management>Settings.  This option will become available after a new drive is added to the empty drive and the unit is powered back on.  It may need to overwrite the new disk, it will indicate which disk is being overwritten by marking the new drive with green stripes.  If you are being asked to overwrite data but none of the disks show green stripes, please stop and backup first as proceeding will most likely result in all disks being overwritten. 
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

  • Login error in Portal after importing a new certificate into BI

    Hi Experts,
    Our certificate in BI expired last month and we were unable to login to the BEx reports due to this.
    I have created a new certificate using Visual Administrator and imported that certificate into BI using STRUSTSSO2 after deleting the old certificate from the system PSE.
    After which I have added this new certificate to the ACL for Single Sign On.
    Then rebooted the JAVA stack for the changes to take effect.
    Now, when I want to login to view reports on the Portal created by BEx Analyzer, I am getting this RFC_ERROR_LOGON_FAILURE exception.
    When checked in SM50, it shows SsfVerify failed and SSF_API_NOCERTIFICATE errors.
    Please help me out resolving this. Did I miss out on any of the steps?
    Also when I ran the report, RSPOR_SETUP, the step 5 shows SID_certificate.crt is not existing and the step 12 shows that BI certificate not imported, SAP BI User is not mapped to SAP EP User.
    Regards,

    Hi,
    Have a look at this [thread|The URL http://xxx was not called due to an error; as well as the [Wiki Link|http://wiki.sdn.sap.com/wiki/display/BSP/Logon].
    Hope this will be helpful for you.
    Regards,
    Varadharajan M

  • Best practices for importing archived/new photos into LR?

    Hi All,
    New to LR 2.7.  After countless tutorials and online chats, I am still confused as to how LR manages image files.  It's like HS algebra all over again!
    Is the LR designed and intended for managing all of your photos or just those that need editing?
    Do you import all photos for one giant library?
    Is it best to save photos on external drive first then import to LR?
    For photos that are saved on an external drive, is it still necessary to copy them to a folder on your computer before importing or can you work directly from the drive? Is there a risk here?
    If you are importing directly from your memory card into LR, do you first need to save them to the external drive to avoid losing the original images?
    Looking for simple step by step routine to follow for archived photos and for new photos
    Thank you for your help!!
    AJ

    AJ Allen wrote:
    Is the LR designed and intended for managing all of your photos or just those that need editing?
    All of them.
    Do you import all photos for one giant library?
    I do.
    Is it best to save photos on external drive first then import to LR?
    For photos that are saved on an external drive, is it still necessary to copy them to a folder on your computer before importing or can you work directly from the drive? Is there a risk here?
    If you are importing directly from your memory card into LR, do you first need to save them to the external drive to avoid losing the original images?
    You can store the images where you want, internal, external or network, and you can import directly from a card to that location.  LR won't delete the images off the card, you have to do that separately.

  • Is it possible to import AI CS5 settings into AI CC 17?

    I would like to use Illustrator CC 17's import feature to bring in my CS5 settings but it doesn't seem to work. Does anyone know if it's possible?

    Am 18.02.2014 um 23:03 schrieb T. Peabody:
    I want to import as many settings from CS5 as possible. Workspaces, default profiles, color settings, variable width profiles, etc. After digging more it doesn't look like it's possible.
    Variable width profiles might be possible. I would try and compare the files - they are only text files.
    Also document profiles might be possible. Although I would save-as them to the current version.

  • Creating new hierarchy based on existing r/3 hierarchy & loading

    Hi,
    We have an existing hierarchy in BW which we bring in from SAP R/3.
    I want to use the majority of this hierarchy but I need it in a different sequence. If I copy this existing hierarchy and then re-structure it to how I need it, I assume that whenever any changes are made to the existing hierarchy, that these changes won't filter through to the hierarchy I need to create.
    If my assumption is correct, does anyone have any suggestions as to what, if anything, I can do in order to make any changes in the existing hierarchy come through to the new one without any manual intervention.

    Hi Mark,
    The 4th option is to write a code in CMOD and restructure the internal table there itself. In this case you do not need worry about the change in the hierarchy. Please let me know if this helps.
    Rgds,
    Bikas

  • Is it possible to import a wordpress blog into muse?

    I don't have much else to add haha, just wondering if this is possible and if so, how?
    thank you!

    Could you please direct me to info or a tutorial on how to do this (export blog from wordpress and import into muse)? After reading your comment I had hope but have found nothing that indicates that can be done. Please don't post a solution and then NOT tell us how to implement that solution ; )

  • Is it possible to import a photoshop timeline into Flash CC?

    I'll explain what it is I am making,
    I have created a globe in photoshop which rotates 360 degrees, I'm looking to import this into flash to make the globe interactive with markers. I need to earth to be continuously spinning though when a location is clicked, the earth spins to that point, a bit like google earth. I can see there is no way to create 3D objects in flash so I cannot make a professional looking globe without it looking flat and boring unless I can make it on photoshop and somehow import it to flash while still maintaining the 3D attributes of the sphere and still have the earth rotate.
    I'm not overly experience at flash but any help I can get would be greatly appreciated.
    Thank you,
    Jamie

    if you can save as a sequence of bitmaps, you can import that sequence into flash along a timeline.

  • ALERTS: Is it possible to create a new container Variable in Existing alert

    Hi PI Experts,
    I have a existing alert ZTEST defined in ALRTCATDEF. Now I want to create a new container variable PONUM to ZTEST in a UDF and populate it with a value coming in the payload. I have defined an alert rule for this alert and this alert will get triggered for any IE and AE msg failures for my sedner & interface combination. I tried calling the RFC SALERT_CREATE from my UDF by making RFC lookup and passed PONUM as Element and value from a fileld in Value element. If a msg failed in PI, two alerts are getting triggered. One for the alert rule I defined and other because of the RFC lookup (SALERT_CREATE). The one raised from alert rule does'nt contain the PONUM value I passed fron UDF and the one called from SALERT_CREATE does'nt contain the existing container variables defined in ZTEST (like SXMS_MSG_GUID, SXMS_FROM_SERVICE etc).
    Please let me know, how can I raise only one alert for any msg failures for my sender & interface combination. Inaddition to the usual container elements (SXMS_MSG_GUID, SXMS_FROM_SERVICE etc) my alert should also contain a variable containing the PONUM (from the incoming payload).
    Thanks,
    Raki

    Hi Experts,
    Is there a way to achive below requirement.
    Thanks,
    Rakesh

Maybe you are looking for