Is it possible to import a wav file into flash that is 48MB?

If I can only crunch the file down by 90% then I'm still at a
huge amount of MB. What is a "reasonable" amount of MB's that can
be uploaded so it loads quickly enough for dial up folks?
I have a client with a 10 minute video. He has it saved in
MPG and WAV. In wav he just told me it's at 48MB.
Should I even bother with a file size this large?
Any advice out there??
Linda

Hi,
If you target audience will use a dial up connection, then
you should consider the SWF file size to be small, I do not know a
standard, but I guess not more than 200-300 k. And use a preloaded
in the first of it.
The large WAV files helps increasing the file size, but it is
not the only reason. You have to tell your client to consider the
size in the files he or she sends. And you can optimize your file
and idea storyboard to keep the size small.

Similar Messages

"Input contract violation" error message when trying to import a .wav file into AE?

I am trying to import a .wav file into AE and keep getting an "input contract violation" message from the program followed by it shutting down. If it means anything, I bought the song online, but it has been paid for and I downloaded the .wav file after my purchase. Any idea of why this may be happening? Are there any particular settings which may be mandatory on the project timeline to import a 3min song? Thank you!

YOu have not provided any system info, not told us what version of AE you use, your audio setting, what specifics in the audio file and a million other things. See how it may not be possible for anyone to tell you anything beyond "Your computter sucks!" ???
Mylenium

A problem with importing layered PSD file into Flash

Hi.
There's a problem with importing layered PSD file into Flash.
If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
If the higher layer has brush or transparent effects, it becomes worse.
Any help with this problem?
Thanks.

How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

Image problems importing Illustrator 10 file into Flash MX.

Hello,
I'm working on my portfolio and want to import an Illustrator
(version 10) file into Flash (Flash MX). The problem I'm having is
that when I import the Illustrator file into Flash, it comes out
looking blurred. I tried exporting the Illustrator file into
Photoshop and saving it as a JPEG, PNG, and TIFF (in each file
format, changing the image size to 72 dpi) and I still get the same
blurred result. I also tried saving the file for web, in
Illustrator (in JPEG and PNG formats) with no success as well.
The Illustrator file is a small collage of my graphic design
work (where I pasted graphic work done in Illustraor and made
clipping masks to collage them together), so I'm not sure if
bringing these files together maybe causing some technical issue or
is importing Illustrator files into Flash just something that will
always appear blurred. If so, is there a way I can bring the file
into Photoshop and work with it where I can import it without the
blurred appearance?
Any help will be greatly appreciated.

Hi Matthew,
Here's the Help doc that talks in more depth about Smart Objects:
http://help.adobe.com/en_US/photoshop/cs/using/WS41A5B796-6846-4e95-8459-95243441E126.html
And here's a section that goes into more detail on Placing files:
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-78f2a.h tml#WS634E6022-BC34-4aa8-857B-21D88D4C8D50a
We have multiple request to add support for externally linked files and certainly see the value. There also are a couple third party solutions that offer linked file behavior (I'm not sure what versions of Ps they work with). You can see and add to the request (and find the third party solutions) here:
http://feedback.photoshop.com/photoshop_family/topics/please_consider_a_references_tool_to _create_links_to_layers_or_folder_groups
regards,
steve

Dynamically importing a .mov file into flash

Hi,
I need to import a .mov file into a flash file and create a
.swf movie. I can do it through File > Import Movies option. But
I want to make it dynamic and import the movie. I would like to use
ActionScripts rather than the File> Import options. Pls let me
know if this is possible. Let me know if you have any questions.
Appreciate any help.
Thanks & Regards,
Magesh

You can only dynamically load at runtime FLV movies.
You can automate the authoring time environment but this is
only with the Authoring tool. See
Extending
Flash

Importing a .wav file into iMovie

I've downloaded some .wav files onto my desktop from a free audio clips website, but I can't drag them into my audio tracks in iMovie. What can I
do to convert them or import them in an acceptable format? Thanks.

Hi Lane - welcome to the forum!
iTunes should be able to import and convert those files to AIFF or MP3.

Importing a wav file into iTunes

I get voice mail forwarded to email in the form of a .wav file. It will not play back on my MacBook (1st generation black). If I import it into iTunes (drag n drop) it looks like it accepts but nothing happens. Why?

The WAV files produced by voice recorders are low bit-rate WAVs, quite different from CD-quality WAVs.
I do not know exactly what the problem is, but I can tell you that since iTunes 8 came out, this forum often gets complaints about iTunes not properly handling low bitrate WAV files.
Personally I would get a 3rd party conversion tool and make them into MP3s, but maybe someone has a better idea.

Is it possible to import an avi file into iTunes?

I am trying to import in a TV show that i have downloaded as an avi file into iTunes. However when i try to import it nothing happens, if i try and change the file format into a mp4 it wont recognize it. Does anyone have any ideas?
I can not find it in any other file format anywhere online.
Any help would be appreciated.
Thank you

Export the OMF from an audio app like ProTools or Logic as a stereo pair AIFF, then use that with your video. Chop it up if you need to checkerboard.
Of course this will only work if the audio is very simple - overlapping audio will mess you up. If you can figure out the audio app part, you can split up your OMF into separate tracks.
But then if you can't get it into an audio app, you're a bit hosed.

How to import Sony EX1 files into FCS (that are already on HD in folders)

let me try an explain, I have bought some footage, and the person that sold me the footage gave me the raw files. I was shot using a SONY EX1. I have one too, as well as a EX3. My difficulty is that I'm not able to import the files into FCS... when I import my own footage I read it from the SXS using XDCAM Transfer, but as the footage he sold me is already on my HD and in the raw form (in folders divided into files)...
Any ideas?
Thanks

I have been away on a shoot, but finally back, and still have not resolved the problem...I have try to do what you say, but XDCAM Transfer does not recognize the folders... it is strange...any other idea???

Is it possible to import a photoshop timeline into Flash CC?

I'll explain what it is I am making,
I have created a globe in photoshop which rotates 360 degrees, I'm looking to import this into flash to make the globe interactive with markers. I need to earth to be continuously spinning though when a location is clicked, the earth spins to that point, a bit like google earth. I can see there is no way to create 3D objects in flash so I cannot make a professional looking globe without it looking flat and boring unless I can make it on photoshop and somehow import it to flash while still maintaining the 3D attributes of the sphere and still have the earth rotate.
I'm not overly experience at flash but any help I can get would be greatly appreciated.
Thank you,
Jamie

if you can save as a sequence of bitmaps, you can import that sequence into flash along a timeline.

Is it possible to import a .idea file into Illustrator CS3?

I have sketches and files on Adobe Idea on the iPad. How to I bring them into Illustrator and preserve the layers, etc? .png, .pdf and .jpg don't seem to do this. I'm sorry if this is a "no duh" question, but I am just starting out with these programs and would appreciate the help. The question didn't turn up in a forum search.
Thank you in advance!
~Anna

Mr. Zimmerman,
Thank you for taking up six post spaces on this forum question. Obviously I haven't read any of the app information, or subscribed to the adobe cloud, or searched the forums, despite having used those to discover this problem. Perhaps I should have underlined the program name that I mentioned in my original post, and the file formats I listed, which are only available if downloaded from the cloud, so that you could have more easily understood my question. I should have included Google link for the application so you wouldn't have to waste time looking it up for yourself. Maybe I should have mentioned that I called support and they suggested that I post in the forums to see if anyone else had gotten around the problem.
Also, sadly, the link doesn't answer my question. You seem to think that I am simply trying to export files. I have demonstrated in my original question and my reply to a previous answer, that I have already exported in every file available for use with the app and the cloud. I was asking, since I need to clarify, why .idea files would not open in Illustrator CS3, and why, when other file formats were tried, did they not preserve the layers. Also, since they wouldn't, was there another way to export besides the -listed- export file formats that would allow layers. And, as before when I tried a search in the Adobe Ideas forum, there was no answer to how to open an idea file in CS3, or preserve the layers in CS3 in any of the other file formats offered.
I am sorry that you misunderstood my question.
Have a lovely day!
~Anna

Is it possible to drag and drop files into flash?

Hi,
Im making an upload control that
will upload files from the user computer to the server
Right now the user choose the files with the 'Browse for
files dialog'. I
want that the user will be able to drag and drop files to the
control
instead.
Is it possible?
Thanks,
Ehud

Ehud Banai wrote:
> Hi,
>
> Im making an upload control that
> will upload files from the user computer to the server
> Right now the user choose the files with the 'Browse for
files dialog'. I
> want that the user will be able to drag and drop files
to the control
> instead.
Not possible.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Importing Illustrator CS3 files into flash CS3 to tween

Hello,
I'm definitely not a flash pro so I would like some help!
I'm trying to animate a man in Flash CS3 who was drawn in
illustrator CS3.
I've imported all the layers but when I try to tween them
only the ones that have a single path tween correctly. Can you only
tween single path layers or am I being an idiot?
Many thanks and I look forward to your comments!

you can actually make illustrator drawings into symbols for
use in Flash CS3 while they're still in Ai. I would try that
approach first. There are some video tutorials on Adobe's site-
I've lost the link.
That takes it out of the multi-layer wackiness, and puts
everything together in nice packages.
Hopefully I'm not telling you something you already know X
/

Import dll file into Flash 8

Hi!
Anyone knows if it’s possible to import a dll file into
Flash, or, if flash can connect in some way to a dll file?
Thanks in advance
Paulo

Well object expand is what I did then copy and paste, I am not certain of the reason to crop.
this is what i got when I expanded copied and pasted. so I do not think the crop is necessary it pastes as a symbol and the symbol is clipped which I think is what you want.
But if in this case you want the stroke as well once you select anyone of the countries they have no stroke according t the tool bar proxy and so it you give it a stroke using say a swatch and then expand copy and paste you get both the fill and the stroke if you desire the stroke as well.
In the case of France and Paris once you paste those into Flash after you stroke and expand then you select both the city and the country and make that into a symbol so that they are one.
And I notice from the art you sent all you have to do is select a country expand, copy, paste and then undo the expand and you are good t go do your work.

I cannot import 5.1 WAV files into iTunes

Hello
I'm running iTunes 11.1.5 (5) 64 bit on OSX 10.9.2. I'm trying to import some wav files into iTunes, they are about 6-11 minutes long each, they have 5.1 (6 total) channels, 16 bit depth and are sampled at 48,000 kHz. I can run them in QuickTime Player 10.3 (727.3) without any problems, but iTunes will not run them. This stil happens if I try to import the same files when they are in Apple Lossless format as well. I have several other surround sound files sourced from other stuff and they wil not import either, but they still run in Quicktime Player just fine. I don't have any pluging installed for iTunes or QuickTime Player. Does iTunes just not support surround sound audio, or is there something wrong with the files that I'm trying to import?

Hi Michael,
I bounced a PCM 5.1 WAV Audio File from Logic Pro X, This File alredy plays 5.1 surround from desktop just with the space bar preview and also with QuickTime ok? But Itunes 11 doesn´t import PCM 5.1 (multi) Wav audio files as you know, so I Knew that in the Itunes 11 for the movies tracks the 5.1 surround audio is automatic.See this link below
http://support.apple.com/kb/ht4072 -
What I did?
I just imported my audio file to Apple COMPRRESSOR, and choose the H.264 output format and I changed from .MOV to .MP4 (This one Itunes import with multi audio 5.1)
and also select 48 Khz and 720 Kbps. After encoding my audio file from ( 226 Mb) PCM 5.1 Wav about 4.20' went to a AAC 6 channes 48 Khz / 720 Kbps .MP4 file with 24 Mb size. Itunes import withou problem and played 5.1 surround as I wish.
I hope you understood my explanation,
Regards
Paulo

Is it possible to import a wav file into flash that is 48MB?

Similar Messages

Maybe you are looking for