Is it possible to import both HDV and SD(shot in 16x9 format) in the same imovie 11 project? If so, how, please.

I am trying to combine both HDV and SD video in the same project and iMovie 11 doesn't want to accept the two different types of files at the import stage. Help please.

You need to import the footage into iMovie Events. Once they are in an event (or multiple events) you can drag these clips into an iMovie Project and mix them together.

Similar Messages

I recently bought a 4th generation ipod shuffle. Am I able to have both music and audio podcasts loaded on it at the same time?

I have not been able to include both music and audio podcasts on my shuffle at the same time. Is this possible with the shuffle?

I disabled all my computer's firewalls and sure enough, IT WORKED!! My iPod is updated and just now finishing restoring! Thank you SOOOO SOOO much. : D

Is Cleartype able to support both RGB and BGR sub pixel panel displays at the same time?

Hi,
I am using 2 27' LED displays on my PC. One has RGB sub pixel, the other has BGR sub pixel.
I have problem to tune the font using Cleartype. I have tried to tune all displays a few times and always get the following result.
If I use the RGB one as the primary display, the font on the RGB display looks ok but the font on the BGR display looks weird after tuning using cleartype.
If I use the BGR display as the primary, the font on the BGR display looks ok but the font on the RGB display looks weird after tuning using cleartype.
Basicly, the after tuning with Cleartype, the font on the Primary display looks good but on the other looks weird.
I have also tested with single display setup. i.e. connect only the RGB sub pixel display or the
BGR sub pixel display.
ClearType tuning works well for single display setup no matter which display I have connected.
But once I connect the 2nd display and tune using Cleartype, the font on the Primary display looks good but on the other looks weird. (The same as above)
To be more specific, the RGB display is Philips 278C4 (connect using HDMI), the BGR display is Dell P2714H (connect using DisplayPort. I have also tried DVI. DisplayPort or DVI give same result).
My system is Win 8.1 Pro x64 JA-JP with all latest patches installed, and my graphic card is nVidia GTX 760, with the latest driver installed.
I suspect this is due to one display has RGB sub pixel panel, and the other has BGR sub pixel panel, which means
Windows ClearType need to take care both RGB and BGR for at the same time. I am not sure if this is fully supported by Windows 8.1 ClearType.
Is there any solution or workaround to make the font on both displays looks nice?
Thanks.

Hi,
Windows includes several technologies to render text on the screen. These include Windows GDI, Direct Write and Windows Presentation Foundation.
Windows GDI is limited to using one set of ClearType settings per system
while the other two support different settings per display.
It depends. Most LCD screens have a RGB striping order. A very small number have a striping order of BGR.
For more question, refer to this link:
ClearType FAQ
http://www.microsoft.com/typography/ClearTypeFAQ.mspx
Kate Li
TechNet Community Support

I've used Firefox for years. 2 days ago it wouldn't open. I uninstalled it using Revo uninstaller and put it back. Its still the same. Can anyone tell me how 2 fix this or change my mail settings for I Explorer. thx

and now it just wont open can anyone tell me how 2 change my mail going 2 firefox and start going 2 i explorer please

For gmail there are no settings to change, you can access gmail from any browser just by going to the gmail site and logging in.
The [[Firefox will not start]] article should help with the problem you are having with Firefox.

I have downloaded the latest Itunes and now I can't launch it because I don't have Apple Support application. I've already uninstalled and reinstalled three or four times with the same error code 2 On vista, how can this be fixed?

Where do I download Apple Support Application for Itunes?

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Is it possible to install both FCP7 and FCP X on your hard drive without running into problems?

Is it possible to install both FCP7 and FCP X on your hard drive without running into problems?

Apple recommends separate partitions: http://support.apple.com/kb/HT4722

Possible to use both Tabular and Multidimentinal with same SharePoint 2013 farm?

I would like to build SharePoint 2013 based reporting portal with Power View as visualization tool.
Is it possible to install both Tabular and Multidimentional to same physical server?
Is it possible that some Power View reports use tabular and others multidimentional?
Could above requirement work in production environment? Anybody tried?
Kenny_I

Hi Kenny_I,
According to your description, you are going to create a PowerView report using SQL Server Analysis Services Multidimensional database or SSAS tabular model as data source in SharePoint 2013, now what you want to know is that is it possible to install both
Tabular and Multidimensional to same physical server? And is it possible that some Power View reports use tabular and others Multidimensional?
Of course we can install both Tabular and Multidimensional to same physical server that had SharePoint 2013 installed. In my tested environment, I have installed all of them on the same server. And we can use tabular model and others Multidimensional database
on individual PowerView report. However, it seems that we cannot use both tabular model and others Multidimensional database on the same Powerview report.
Even though we can install both Tabular and Multidimensional to same physical server, however in the production environment, the recommendation is that install them on different server, it will beneficial to troubleshooting the issue when some issue occur
on the environment.
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Is it possible to download both 720p and 1080p versions of a movie?

Is it possible to download both 720p and 1080p versions of a movie purchased from iTunes and keep them both in your iTunes library? I want to watch the 1080p version on my 3rd gen Apple TV and the 720p version on my 4th gen iPod Touch?
So far, I have downloaded 720p versions and the only way I can get 1080p is to delete the 720p version I have and then redownload the 1080p from the cloud. I want to keep the 720p version and also have the 1080p version.

I ended up getting the proper response from iTunes Support. I forgot to share it with everyone else. Here is how you download both versions of the videos:
iTunes only lets you download one version of a video at a time. As a work around, I would like you to try the following:
- Download the 1080p version of the video first
- Then remove the 1080p version of the video from your iTunes library and save it somewhere else on your computer.
- Now that you have removed the 1080p version go to the iTunes > Preferences > Store
- Change the HD version "when downloading HD videos, prefer." to 720p
- Go to purchase page, the 720p version should download.

Is it possible to import new slides and keep the audio?

Hi,
is it possible to import new slides and keep the audio?
The designers have changed the housestyle of the powerpoints,
but the audio has been recorded in captivate in the meanwhile. Is
it possible to keep the audio of the files and replace all the old
powerpoint slides with new ones? (not one by one by hand off but
all in one button press ?)
Thanks,
wouter
My
Elearning company.

Hi again Wouter
Are you saying that your Library has lots of other audio that
isn't really used on a slide? If so, try right-clicking the Library
panel and choosing "Select Unused Items". This should highlight all
the sound files not in use. Now press the Delete key and they
should be removed from the Library view.
Now you are faced with just what is left. You may not know
which clip goes with which slide. So try this. In your Film strip,
audio attached to the slide should appear as a Speaker icon in the
corner. Click the Speaker icon and pop down (or up) menu should
display. Choose "Find in Library". This should highlight the
associated clip in the Library. Now, if you like, you may
right-click the file in the Library and rename that to something
like "Slide X audio" (so you know which clip goes with which
slide).
Cheers... Rick

Is it possible to import a pdf instead of a jpg to put in the base "photo layer?"

Is it possible to import a pdf instead of a jpg to put in the base "photo layer?"
I start with a pdf document convert it to a jpg
     mark it up in ideas
     then finish up with a marked up jpg document
     then reconvert it back to a pdf
I can only use jpgs in ideas. Converting the pdf to a jpg and them re convert it back after marking it up but this seems like an awfully round about way of doing things especially as it should all be inhouse adobe products .
An alternative would be to use adobe reader to mark up the document, but this does not allow me enough control as compared with marking it up Ideas, particularly with layers and control of the tools.
What I am trying to do is mark up and scribble over my architectual CAD drawings which are exported as a pdf document.
Any one got any bright ideas?
thanks
Brian C.

Hi Brian,
Saving as PDF it is not currently possible.I created the following feature request on your behalf. Please add your vote and any comments you would like see included
http://forums.adobe.com/ideas/1973
I also considered recommending Adobe Debut, it is currently only available on Android and might only work if you presenting the markup data from the tablet itself. You can import a multi-page PDF and add markups to the various pages and present the document to someone from the tablet, not sure if that would be useful for you or not?
Another consideration:
http://usa.autodesk.com/design-review/
-Dave

Is it possible to uninstall Adobe Premiere Elements 13 from one computer and put it on another PC, using the same serial number?

I had installed Adobe Premiere Elements 13 on my laptop, which is slow. Is it possible to completely remove the program from my laptop, and reinstall it on another PC, using the SAME installation disc?

Tomquer
If all you have is the Premiere Elements 13 purchased activated serial number on one Windows computer, you can go ahead and do nothing else but install the program from the disc on the second Windows computer with the same purchased serial number.
That will leave you with the purchased activated serial number on two of your computers.
Adobe allows you the same purchased activated serial number on no more than 2 of your computers. So, nothing to do but to use one at a time.
Lots of scenarios beyond.
1. Deactivate Premiere Elements 13 from computer 1. Do not bother to uninstall. Deactivation is not the same as uninstall.
To deactivate, in an opened Premiere Elements 13 project, go to Help Menu/Sign Out. Close out of there.
Then do nothing, leave the program in the deactivated/installed state.
2. Deactivate and Uninstall Premiere Elements 13 from computer 1.
Any questions or need clarification, please let us know.
Thanks.
ATR

I have bought itunes songs on an ipad with my daughter apple id. i would like to back them up on the same computer I sync my iphone with using my apple id but they will not transfer. Both iphone and ipad have only been synced on the computer mentione

I have bought itunes songs on an ipad with my daughter apple id. i would like to back them up on the same computer I sync my iphone with using my apple id but they will not transfer. Both iphone and ipad have only been synced on the computer mentioned since they were purchased. Is there any way to get the ipad music transferred to the computer?

And they were definitely purchased from the iTunes store, they show on the account's purchase history (Store > View Account on a computer's iTunes, or you can view the last 90 days purchases via http://reportaproblem.apple.com) ?
You could potentially log into the account on that computer's iTunes (Store > Sign Out to log out of your account, that will then change to a Store > Sign In option) and redownload them by clicking on the id towards the top right of the iTunes screen and Purchased on the popup :
But that will potentially tie that computer to that account for 90 days : Manage your associated devices in iTunes - Apple Support
Or do you have a different computer that you could redownload them on and then copy them over to that computer via a flash drive or memory card, and then add them to its iTunes via File > Add To Library ?

I have 2 accounts in my family and would like to purchase some of the same songs for both accounts, however when I try to purchase a duplicate song from the second account the song says play instead of purchase. How can I get some of the same songs?

I have 2 accounts in my family and would like to purchase some of the same songs for both accounts, however when I try to purchase a duplicate song from the second account the song says play instead of purchase. How can I get some of the same songs?

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

How can I verify credit of an itunes card that has already been redeemed? My Grandson and I both redeemed itune cards on our shared account about the same time. There isn't a credit balance after his purchase?

How can I verify credit for an itunes card that has already been redeemed? My Grandson and I both redeemed itune cards on our shared account about the same time. There isn't a credit balance after his purchase?

Have you checked the account's purchase history to see if anything could have used up the balance : See your purchase history in the iTunes Store - Apple Support ?
If there aren't any purchases then try logging out and back into the account (e.g. on your iPad tap on your id in Settings > Stores and then log back in) and see if a balance then shows on it. My account's balance shows at the top right of the store's page on my computer's iTunes, by clicking on my name towards the top right of the iTunes screen, and by logging in to view my account via the Store > View Account menu option. On my iPad devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > Stores and it should show on the screen that you are taken to)

Imessage on my iMac has created two iMessage account both asking for Apple ID....and no option to - (delete) one of the two duplicate accounts....how can I delete one of them it just bothers me due to sign in issues....goes inactive when signed in on othe

imessage on my iMac has created two iMessage account both asking for Apple ID....and no option to - (delete) one of the two duplicate accounts....how can I delete one of them it just bothers me due to sign in issues....when signed into one it signs out the other and goes inactive I just wanted to delete one of them so this issue doesn't happen....why doesn't it give the option to delete ONLY these two accounts

1. Don't confuse "Apple ID" with iTunes Account ID. You can have many Apple IDs but only one iTunes account active at a time.
2. If you "changed" your iTunes account ID, you actually have 2 accounts - one under the old name plus the new name.
3. You can't merge the accounts - they remain separate. Apps purcahsed under the old account name will update ONLY WHEN THE PHONE IS SIGNED IN TO THE OLD ACCOUNT NAME and visa versa.
4. Likewise, you can sync only the apps, music, media purchased under the account the phone AND iTunes are signed in to.

Is it possible to import both HDV and SD(shot in 16x9 format) in the same imovie 11 project? If so, how, please.

Similar Messages

Maybe you are looking for