Is it possible to install a ATI HD 4780 in to my mac pro PCi.E slot 1

Hi iam new to this apple forum and have an Question befor i buy and try then fail or fxxx sumthing up. Are there any driver support for this set up?
Thankx for replies Gals :N: Guys

If it lacks EFI firmware, it won't work in OS X and no video out but will work if you install and run Windows natively.
Right now, Nvidia 8800GT and ATI Radeon 3870 are the two upgrade choices.
http://www.barefeats.com/harper18.html
http://www.barefeats.com/harper11.html

Similar Messages

How to install an ATI Radeon HD 5700 into a Mac Pro dual 2.66?

My Nvidea card just died on my and I've gotten an ATI Radeo HD 5700 card to replace it but I can't find any information anywhere on the installation process. Slotting it in is easy but I'm unsure where to connect the 6-pin cable. I can see a pair of likely connectors on the board marked HDD_SNS but I'm not sure which, if either, is correct. Anybody out there with info? I've tried the AMD site and just googling with no useful results.
Thanks,
JD

Does the following pdf help?
Graphics Cards with Booster Cable
(look at page 5)

Is it possible to install and run Windows Server 2008 on a Mac Mini Server in a Virtual Machine software like Parallels

I am wondering if it is possible to install and run Windows Server 2008 on a Mac Mini Server as a VM as my main application uses Windows VisualBasic and Fox Pro and requires a Static IP to connect to it, My other offices connects to Windows Server via RDP.
Basically I am researching a Server for the same purpose and since Mac Mini and OsX both are robust in nature it can fit the bill if every thing work fine.
Thanks

From the Parallels website:
32-bit Operating Systems
Windows 8 with: Windows 8, 8.1 (when available)
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2008 R2, SP2, SP1, SP0
64-bit Operating Systems
Windows 8
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2012
Windows Server 2008 R2, SP2, SP1, SP0
I do suggest that you upgrade RAM to at least 8gig
if you haven't already.
FWIW, I currently use Win8/64 bit with Parallels on a 2011 Mini Server
using the windows environment for engineering applications and have
had no issues. I am running Mountain Lion but do not have the
Server app installed.

Installed a ATI Radeon HD 5770, now Final Cut Pro won't even open - says 0mb Vram?

Installed a ATI Radeon HD 5770, now Final Cut Pro won't even open - says 0mb Vram? Only dvi port work the two mini's not at all. Bad card? Macpro 3,1

I would guess there is a a corrupt media in the project. You could also try to copy a part of it to new project which is shorter and see what happens. 5 Hours is extremely long. Best to divide it to smaller sections.

Can't install montain lion, mavericks or yosemite on my mac pro early 2008 8core

I tried installing mountain lion mavericks and yosemite on my mac pro early 2008 I upgraded the video card to see if that was the problems and still the same the problem is that after installing even during install the mouse moves super slow and the keyboard won't work at all so I can't entern
any information this is with a clean install and even if I update lion it does the same everything works fine on lion 10.7.5 problems there does any one know what could be the issue here? I'm only running one monitor and its the 30 inch cinema display here are the specst of my machine excuse my grammar and spelling it was never my favorite subject
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number of Processors: 2
Total Number of Cores: 8
L2 Cache (per Processor): 12 MB
Memory: 8 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
Serial Number (system): G881111VXYK
Hardware UUID: 714C0BE4-9A35-5C33-BF74-0F55F7C31B5F
AMD Radeon HD 6870:
Chipset Model: AMD Radeon HD 6870
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x6738
Revision ID: 0x0000
ROM Revision: 007-NETKAS-ORG
EFI Driver Version: 01.00.507
Displays:
Cinema HD:
Display Type: LCD
Resolution: 2560 x 1600
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: CY03018WXMP
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
ECC: Enabled
DIMM Riser B/DIMM 1:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x014F
Part Number: 0x5453324741504D41435038502D5420202020
Serial Number: 0x00031CFB
DIMM Riser B/DIMM 2:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x014F
Part Number: 0x5453324741504D41435038502D5420202020
Serial Number: 0x00031CFB
DIMM Riser A/DIMM 1:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x01431026
DIMM Riser A/DIMM 2:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5935
Serial Number: 0x57656411
DIMM Riser B/DIMM 3:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser B/DIMM 4:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser A/DIMM 3:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x01172313
DIMM Riser A/DIMM 4:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x01172714
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
WDC WD5000AAKS-00A7B0:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: WDC WD5000AAKS-00A7B0
Revision: 01.03B01
Serial Number:     WD-WMASY0158891
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
HD:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 484.82 GB (484,820,348,928 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/HD
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk2s3
Content: Apple_Boot
WDC WD5000AAKS-00A7B0:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: WDC WD5000AAKS-00A7B0
Revision: 01.03B01
Serial Number:     WD-WMASY0158891
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
HD:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 484.82 GB (484,820,348,928 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/HD
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk2s3
Content: Apple_Boot
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZBHBEEAH
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: MBR (Master Boot Record)
S.M.A.R.T. status: Verified
Volumes:
UNTITLED 1:
Capacity: 500.11 GB (500,107,860,992 bytes)
Available: 449.41 GB (449,412,988,928 bytes)
Writable: Yes
File System: MS-DOS FAT32
BSD Name: disk1s1
Mount Point: /Volumes/UNTITLED 1
Content: DOS_FAT_32
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZBHBEEAH
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: MBR (Master Boot Record)
S.M.A.R.T. status: Verified
Volumes:
UNTITLED 1:
Capacity: 500.11 GB (500,107,860,992 bytes)
Available: 449.41 GB (449,412,988,928 bytes)
Writable: Yes
File System: MS-DOS FAT32
BSD Name: disk1s1
Mount Point: /Volumes/UNTITLED 1
Content: DOS_FAT_32
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZAK1RKSF
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
machd:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 372.42 GB (372,419,407,872 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk0s3
Content: Apple_Boot
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZAK1RKSF
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
machd:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 372.42 GB (372,419,407,872 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk0s3
Content: Apple_Boot
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported

Try this:
clone your system and repair it with Disk Warrior instead
Or try a clean test system install on another drive
A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
Try to run w/o externals. MyBook included.
Is that a 7200.11 1TB? they had a lot of issues.
Run AHT off your OEM DVD.
2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current. Hopefully you have a UPS and is 1500VA unit.
When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
TimeMachine has its own bad habits, especially with Green drives and some externals.
Try to rule out everything and then add back one at a time.
And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old. Might want ATI 5870 or 5770.

How do I take ownership of a hard drive build in windows but installed as an additional disk in my new Mac Pro?

How do I take ownership of a hard drive build in windows but installed as an additional disk in my new Mac Pro?
I bought a Mac and have various HDDs, some Portable some SATA, I can right to them and dont seem to be able to take ownership of them, is this to do with the format or Security seting I can't find?
Any help would be great; thanks.
Stephen

Thanks Kaz-K, this was what I assumed it to be. I have started to move the stuf over to a 4GB internal drive, once done and verified, I will reformat the drive and move it back, blooming nusience.
Cheers.
Stephen

ATI 5770 1GB Video Card For Mac Pro dvi hdmi cable

I am sending video signal over a 50FT HDMI To DVI from my Mac Pro (3,1) via ATI 5770 1GB Video Card For Mac Pro (5.0 GT/s) (181062917108) and I cannot get a constant signal to my TV. The signal stays on for a few seconds or several hours or my TV (Samsung) says there is no signal or I get just a gray static screen.
I never had a problem before with my previous video card the 512MB nVidia GeForce 8800GT with a 25ft long cable. Any ideas people?

A cable of about 5 meters (16 ft) can be manufactured to Category 1 specifications easily and inexpensively by using 28 AWG (0.081 mm²) conductors.[114] With better quality construction and materials, including 24 AWG (0.205 mm²) conductors, an HDMI cable can reach lengths of up to 15 meters (49 ft).[114]
from: http://en.wikipedia.org/wiki/HDMI
You may need a higher-quality cable or a lower resolution for your display to make this work without an HDMI Repeater.

After installing iTunes 12.1.2.27 on my Mac Pro 6-cores, my Mac freeze and boot again. Why?

After installing iTunes 12.1.2.27 on my Mac Pro 6-cores, my Mac freeze and boot again, and I cannot use iTunes. Can anybody help?
How can install an older version? (I use OS X 10.10.3)

I have the same problem. any help from any one please? thank you

I just purchased a new MacPro to replace my existing 2006 MacPro which cannot be undated with the new operating system. My question is what is the safest way to transfer all my files. 1) simply install my existing 2TB HD into the new Mac Pro or 2)

I just purchased a new MacPro 3.2GHz Quad-Core Intel Xeon processor to replace my existing 2006 MacPro 2 x 2.66 GHz Dual-Core Intel Xeon because it cannot be undated with the new Lion operating system.
My question is what is the safest way to transfer all my files to the new computer. 1) simply install my existing 2TB HD into the new Mac Pro, set it as the startup drive, and update its10.7 operating system or 2) or use the migration program.
I'm concerned that simply installing the existing 2TB HD, I may have issues with it not recognising some infromation written for the old 2 x 2.66 GHz Dual-Core Intel Xeon.

your new system runs 10.6.8 just fine as has been said and stated many times.
I would clone it first.
I would even clone the original system it has.
And if you have or want to use Lion and then Mountain Lion, fine - I would still keep backups of every OS.
I am not a fan of putting the OS and Apps plus all the data all on one drive. I like to keep them separate.
Whatever OS, rerun the last combo update is all and any other updates.
And by "new Lion" I assume you don't mean 10.7 but "Moutain" 10.8. Part of me says keep Lion and SL around, and test and try out ML with your apps and other hardware you may have. After too many years, waiting for 10.8.1 - and give everyone time to update their apps and retest.

Is it possible to put the new nVidia GTX 480 in the Mac Pro

I'm planning on creating the ultimate gaming machine, but also want the best operating system. So I have decided that my next computer will be the Mac Pro and will have the new nVidia GTX 480 (if it works). The Windows partition would be used for heavy gaming with DX 11 and PhysX technology. While on the OSX partition I could use the greatest operating system, to do general things like Movie Making, Picture Editing, Web Surfing, Emailing etc.
So all in all, is it possible to install a GTX 480 on OSX? I know it'll work with the windows partition, but not sure about OSX. I'm also unsure about the hardware side of things, but that's why I'm asking!
Any help would be greatly appreciated.
Thanks again,
Mike

If you don't need dual processor, PC with 980X Gulftown makes sense.
Forget over clocking a Mac, but if you need dual processor, the Mac Pro makes sense but expect to pay. Otherwise, take a look at
EVGA Classified SR-2 (Super Record 2) 270-WS-W555-A1
http://www.evga.com/products/prodlist.asp?switch=5
Apple has not had good Nvidia drivers. And right now there are two 6-pin, and you need 6 + 8 and stick with Windows 7 and ability to do SLI. I laugh when people talk about "windoz" (rude) being somehow less or 'inferior' having seen the best - and worst - of both (never got caught up in 95/98/NT/XP so spoiled by only knowing Vista/7). I still think 10.6 hasn't quite caught up to 7 in areas that really matter, like threading, multicore, efficient use of memory.
Forget using more than one, Apple likes graphic cards that are low power, low end, and only supporting one high end card.
The GTX 480 @ $499, and if Apple offered it, it would be $549 or more (Apple 'tax' for smaller market and having to do their own drivers). And it would be much later before optimized drivers (maybe next year this time at best).
While you can go water and add custom fans and cooling, the Mac is much more of a "closed" box in many ways beyond RAM and hard drives and +very limited+ selection of graphics.
That really is my honest assessment.
The place where Mac Pro is easier, you can install 32-64GB RAM without trouble and not have to worry about compatibility or PSU issues. I'm always surprised by all the memory testing and supported and problems PC owners go through (I don't think Cruical Ballistix gets enough credit).
DX11 will still take time. Adobe showed how GPGPU/CUDA could benefit, but Apple and Adobe apps have always tended to favor ATI which is just beginning to get into OpenCL technology ... and the 5000 series may find Nvidia Fermi, while it took longer, runs hot and power requirement, could be better poised down the road too.
A single socket Mac Pro 3.3GHz or even stock (same as 920) will do the job you want.
Apple Mac Pro Specials (refurb dept)
http://store.apple.com/us/browse/home/specialdeals/mac/mac_pro
Are a good selection and place to shop. My the time Gulftown + GTX480 and all the rest is out and ready could be more than a few months.

How/Can I install WINDOWS 7 64BIT on a 1st Generation Mac Pro ?

Hi, Is it possible to install Windows 7 64 bit on a 1st Generation Mac Pro 2.66Ghz? Apple suggests that it's not possible and yet I've seen several Googled posts where the users have successfully installed 64 bit on a 1st Generation Mac Pro. The problem is that they've done this creating a bootable iso disk(whatever that is) using a Windows computer with imgburn and windows commands. I'm pretty good at following instructions but I haven't seen any instructions on how to install Windows 7 on this machine using a Mac based approach.
I'm using BootCamp and was able to partition the drive into NFTS and "proceed" with installation; however all te installations failed during setup and Windows would not boot; disk repair was not possible. Besides, from what I've gathered, 32 bit is problematic around memory issues.
When I try installing 64 bits, I never get past the "select cd rom 1or 2" message where the keyboard won't work. It is at this point where others say they have successfully proceeded with moving forward by creating a bootable iso disk.
Problem is it's all Windows based with exe files and presupposes I already have Windows running.
I'm not sure I really understand how to create an iso disk, but I do have ROXIO TOAST 10 which is capable of burning "ISO" disks.Does anyone know how to do this and/or can you point me to a place where there are instructions on how to proceed?? While I realize Apple says that some mid 2006 mac pros aren't supported, there are multiple posts of windows users successfully installing Windows 7 on a 1st Generation Mac Pro.
Thanks.

I have a March 2009 Mac Pro dual quad core running Win7 Pro 64 bit. I have Windows installed on a dedicated internal hard drive. There are no partitions, the entire drive is for Windows use.
Here's how I installed it, I did not start with BootCamp. Make sure the drive you're going to use for Windows doesn't have any important files on it because it will be formatted.
1. Update Snow Leopard
2. Place the Windows cd in the Super Drive
3. Shut down the computer
4. Remove all the hard drives except the one you want Windows installed on. Keep track of the order they are in and at the end replace them in the same order.
5. Boot the computer holding down the Option key
6. Boot to the Windows cd
7. Install Windows and format the drive to NTFS
8. When Windows needs to restart during installation you'll need to hold the Option key and boot to Windows, not the Windows cd.
9. After Windows installs, place your Snow Leopard disc in the Super Drive
10. The Drivers for Windows will be installed along with a Windows version of BootCamp.
11. Go to Start > All Programs > Apple Software Update
12. Update again until it's done.
13. You'll also find a BootCamp under Control Panel, check it out.
14. Shut down the computer and replace the hard drives in their original order
14. Now if you turn on the computer it will boot to Snow Leopard, but if you hold the Option key during boot you can select Windows or Mac.

ATI Radeon X1900XT 512 MB for mac pro first gen

I am looking for a new graphics card for my first generation mac pro desktop (built 2006) Currently has ATI Radeon X1900XT 512 MB installed Any suggestions on where to find one
Alternative may be to get a new machine
M Ferro

For me, the best place for any type of upgrade on your Mac Pro 1,1 (mine is a 2.66) is at Other World Computing.
The only video card available from OWC is the ATI Radeon 5770 HD.
http://eshop.macsales.com/MyOWC/Upgrades.cfm?model=250&sort=pop&type=Video
Note: The same video card is also available at the online Apple Store.
I'm hoping to get it soon.
--->Robert
8-)

ATI Radeon HD 4870 1GB for Mac Pro 2.66 Quad Core Xenon

I have the option of picking up an ATI Radeon HD 4870 1 GB graphics card to go with my soon-to-be-new MAc Pro 2.66 Quad core. I see know that Apple can upgrade to ATI Radeon HD 4870 512MB, but that card is not available to me at the moment. Will the 1GB do the job without overheating the system? Am new to the Mac Pros. Need it for the Windows gaming portion of the system. Am using the rest for graphics and photography.

If the MAc Pro 2.66 comes with Snow Leopard, why would I have to upgrade my OS?
OK. So, if got the MAc version, it would work A-OK without overheating?
Thanks for your input!

Getting Asus ATI 4870 to work in my Mac Pro. Not working. please help!

I read here on these boards that an ATI 4870 would work in an early model (in my case, 2006) Intel Mac Pro.
I jumped in hastily and bought the Asus branded card: EAH4870
I connected it, and nothing... did not work.
I do not think it is a Mac version of this card, perhaps intended to be used in a windows machine.
Questions:
- Do I need to "flash: this card to make it work in my Mac Pro OSX 10.6.3?
- Are there Mac drivers for this card? I can't find anything anywhere
- Basically, can I get this card to work, or do I need to PAY the extra $$$$ just to have a "Mac" version of this.
Keep in mind, I am not a techie, I need to do Work, not fiddle with this kind of stuff.. unfortunately, a software package crucial for a job is very finicky and works with only a handful of cards.. The 4870 is one of them.
I do not have dual boot, and no windows machines to "flash" or rework this card.
If you can help me to get this card to work, it would be MOST appreciated!!!

It is not a Mac version. It does not have the required EFI boot ROM needed to work on the Mac. Video drivers are contained in OS X. Either you have to have the card flashed (this is illegal) or buy a Mac version of the card.
If you aren't a "techie" then you don't have the hardware needed to flash the ROM nor know how. Because this site belongs to Apple we cannot help you with something that is illegal.

Questions about ati radeon 2600 on an 2006 mac pro

I know the debate has been going around for awhile about these cards, Apple claims that they are not supported but my card runs as long as you have leopard installed. So far the card has performed great, all my games and graphics programs run beautiful with it but I do have two problems. One is I can only have my display set at 1400 x 1050 any lower setting results in severe blurring on the screen. The other problem is that the text on my screen is some what pixelated and blurry.
I was wondering if there is a fix for this problem or is it just the price I have to pay for running it on a 2006 mac pro.

If it is a problem, and you can afford another upgrade, the Radeon 3870 might be your best choice.
http://www.barefeats.com/harper17.html
http://www.barefeats.com/harper18.html
http://eshop.macsales.com/Item_XLR8YourMac.cfm?ID=10876&Item=ATI100435928

Is it possible to install a ATI HD 4780 in to my mac pro PCi.E slot 1

Similar Messages

Maybe you are looking for