Is it possible to install a new cpu for a Satellite C50D-A?

[Computer Specs|http://www.mytoshiba.com.au/products/computers/satellite/c50/pscfwa-03j00k/specifications]
I am looking to see if anyone can help me find out if it's possible to change the cpu in my laptop, and what the limitations there might be for the new cpu, I would really appreciate any help. Also if you know a place that can help me with my situation it would really help, preferably in Sydney.

I know it sounds stupid now but why do you want to do this?
As you probably know CPU upgrade is not supported by Toshiba and hardware upgrade is very limited on mobile machines.
Only supported hardware upgrade is RAM and HDD upgrade. These steps can be done without some risk and you can do this on your own.
Please check also - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

Similar Messages

  • I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later.  7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

    I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later.  7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

    AppTrial1 where are you seeing this error exactly?  For information on how to install the Adobe Creative applications included with the Creative Cloud please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • Bought and installed a new battery for my Mac Book Pro 5.1, intel Core 2 dual, the computer makes a lot of noise! The noise disappears in sleep mode. What can be done?

    Bought and installed a new battery for my Mac Book Pro 5.1, intel Core 2 dual, the computer makes a lot of engine noise! The noise disappears in sleep mode. What can be done?

    I bought it from Other World Computer last week for $95. 3rd party, I suppose.

  • Is it possible to install a consumer app for mass usage that would alter the ios device proxy settings? Over the air not supervised. Can an app company use an MDM server to do this if the customer consents?

    Is it possible to install a consumer app for mass usage that would alter the ios device proxy settings? Over the air not supervised. Can an app company use an MDM server to do this if the customer consents?

    HI Chris,
    Thanks for taking the time to reply.
    Could you expand on your answer, which bit is very doubtful?
    Also in your knowledge would Apple work with a company and license it if the software they were developing was desired by consumer demand?
    Thanks
    Gary

  • I just installed the new firefox for Mac OSX 10.6.8 and when I select an image on a site (right click and copy) and paste in Photoshop 5.5, the image lightens. It does not do this in Safari.

    Question
    I just installed the new firefox for Mac OSX 10.6.8 and when I select an image on a site (right click and copy) and paste in Photoshop 5.5, the image lightens. It does not do this in Safari.

    Firefox, Safari, and PhotoShop each handle embedded color profiles differently. For an add-on that makes it easier to experiment with Firefox's color management options, you might be interested in: [https://addons.mozilla.org/en-US/firefox/addon/color-management/ Color Management :: Add-ons for Firefox]. I haven't tried it myself.

  • Cannot uninstall Kaspersky for 2014 so I can install my new Kaspersky for 2015

    HP G62-435DX Notebook PC
    Model: XZ259UA
    I am attempting to UNINSTALL Kaspersky from 2014 so that I can INSTALL my new Kaspersky for 2015.  Something is blocking my attempt.  It starts the process and simply stops right before it's finished.  Something is blocking it, can you help or give me any suggestions?
    Thank You,
    Karen

    I have spent many hours and 7 days on the phone with Kaspersky with no help.  I get a different answer everytime I call and they all end up trying to sale me different contracts for protection.  The last quote was $899.00 for coverage for life.  I thought how stupid do you think I  am?  Long story short I have given up which is what they probably wanted me to  do.  All I can say is stay away from KASPERSKY, they are like a virus themselves.  Sincerely, Karen
    Dragon-Fur wrote:
    Hi Karen,
    Welcome to the HP Community Forum.
    I think you might wish to visit the Kaspersky Site for help with this kind of problem.
    I did find the following which might be helpful:
    Service articles: Removal tool to uninstall Kaspersky Lab products
    The article suggests:
    Download Kavremover.
    Boot your computer in Safe Mode.
    Run Kavremover.
    Restart your computer after the utility completes.
    Complete details are included in the article (linked above).
    Reference:
    Kaspersky - Security for Home and Business
    Click the Kudos Thumbs-Up to show you appreciate the help.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer provides a Fix or Workaround!

  • Installing a new forest for the first time in 2008 R2 SP1

    Installing a new forest for the first time in 2008 R2 SP1 with no other forests present do I run:
    E:\support\adprep\adprep /domainprep
    or any other adprep to get the forest ready using the Answer File:
    [DCINSTALL]
    InstallDNS="Yes"
    NewDomain="Forest"
    NewDomainDNSName="mysite.com"
    DomainNetBiosName="MYSITE"
    ReplicaOrNewDomain="Domain"
    ForestLevel="4"
    DomainLevel="4"
    CreateDNSDelegation="No"
    DatabasePath="C:\Windows\NTDS"
    LogPath="C:\Windows\NTDS"
    SYSVOLPath="C:\Windows\SYSVOL"
    ConfirmGc="Yes"
    SafeModeAdminPassword=""
    RebootOnCompletion=Yes

    Hi,
    As per your statement, there aren't any other forest which mean you are creating a new AD forest in windows server 2008 R2 SP1.
    You don't need to run adprep then. Just run dcpromo on the server and select new forest and provide a Domain Name and follow the instruction.
    Regards..
    Himanshu Rana
    MCTS|MCSE|MCSA:Messaging|CCNA

  • Installing a new CPU

    I have a km2m combo motherboard that supposedly supports a XP 2400 CPU. I'm trying o install, but it wont even power up, and when I try putting the old cpu back in it boots for about 15 seconds and then shuts off.
    Please Help

    I purchased a new UPS for my system (just in case) Ehat do you all think of this!!!
    Feature:
    ª Complies with INTEL® ATX 12V standard
    ª Complies with FCC part 15 subpart J class B 115 VAC operation and CISPR 22
    ª High efficiency output
    ª Two 12VDC fans (one with 4 blue LEDs)
    ª MTBF over 30,000 hours at 25° C
    ª Output short circuit protection (except +5VSB)
    ª Output over voltage protection  
    ª Output over wattage protection (570W)
    ª Resettable power shut down
    Specification:
    ª Maximum output: 450W
    ª Dimension: 5.9"(L) x 5.5"(W) x 3.4"(H)
    ª Working Temperature:  0° C ~ 50° C
    ª Input voltage: 115VAC / 230VAC
    ª Input frequency: 47Hz ~ 63Hz
    ª Storage and shipping Temp:  -40° C ~ 55° C
    ª Humidity: 20% ~ 80%
    ª Response: Less than 1 ms
    ª Dielectric Withstand: Input to frame ground 1500VAC for 60 seconds
    Output Characteristics:
    Output Voltage Min. Output Voltage Max. Output Voltage Min. Load Current Max. Load Current Max. Ripple & Noise
    +3.3V +3.16V +3.46V 1.0A 28.00A 80mV p-p
    +5V +4.75V +5.25V 2.0A 34.00A 80mV p-p
    +12V +11.4V +12.60V 0.5A 14.00A 100mV p-p
    -12V -10.80V -13.20V 0.1A 0.8A 100mV p-p
    -5V -4.50V -5.50V 0.1A 0.5A 100mV p-p
    +5V Standby  +4.80V +5.25V 0.0A 2.0A 50mV p-p

  • HT3964 Installed a new battery for a Macbook 2,1 New battery not charging. Battery symbol shows (Not charging) and replace battery. Green LED on magsafe connection. Disconnection results in an instant shutdown.

    I have just installed a new Battery after the old one showed (Not Charging) and when you clicked on this icon the dropdown"condition replace now". Problem now is the computer still shows the same message in the top bar (Not Charging) and the dropdown also shows "condition relace now". the magsafe show the greem LED i.e not charging, but providing power. If you disconnect the magsafe the computer powers off instantly confirming we have power. I have carried out resetting the SMC controller and still no change. Tested the standby voltage on the magsafe pins etc, all in spec. What should I do now, as I don't want to keep spending more and more. Bellow is the info from the system profiler.
    Battery Information:
      Model Information:
      Manufacturer:          DP
      Device name:          ASMB016
      Pack Lot Code:          0002
      PCB Lot Code:          0000
      Firmware Version:          102a
      Hardware Revision:          0500
      Cell Revision:          0102
      Charge Information:
      Charge remaining (mAh):          0
      Fully charged:          No
      Charging:          No
      Full charge capacity (mAh):          0
      Health Information:
      Cycle count:          1
      Condition:          Replace Now
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          6940
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          10
      Automatic Restart On Power Loss:          No
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Wake On LAN:          No
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          2
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0100
      Wattage (W):          60
      Revision:          0x0000
      Family:          0x00ba
      Serial Number:          0x00391563
      Charging:          No

    Interesting, since I'm experiencing similar issues (https://discussions.apple.com/message/20098653#20098653)
    But before you go back, try this first: http://support.apple.com/kb/HT3421
    I have a different device name, but it just might work for yours.

  • How to install a new voice for function "say" by console?

    Hi,
    For a Text-To-Speech project, I'm using the function "say".
    The problem is that I want to use several languages, and the user of my project have to do nothing except to launch my program.
    So, how can I install a new voice by console?
    I've the other solution to install the voice folder while the compilation but the folder is huge, so it's not optimized...

    I'm actually doing it with AppleScript but I'm not an expert (far from this), so if some one could help me.

  • Cannot install the new update for extreme audio on vi

    when i click the .exe and get to the instalation page it tells me i have a unsupported product and exits i have the vista drivers installed from feb. how do i get this to work?

    You cant install the new driver, because youre extreme audio is not supported. Extreme Audio is the only "X-FI" card that really isnt a real X-FI. So the Xtreme Audio card has its own set of drivers. You just need to take the right path when selecting files to download. You?ll see what I mean when youre there if you pay a little attention to what youre doing. Sorry mate, you got spoofed by you know who.

  • Install a new font for use in reports

    Hi everybody,
    i need to install a new font in order
    to use it from oracle reports.
    (The product is installed on Sun Solaris).
    How cai I install a font? And use it in oracle
    reports??
    Thanks a lot.
    Ugo Mascetti

    Thank you! It worked when I added it to FontBook on my Mac. I checked to ensure it was installed in the Fonts directory on my PC, and it was. So I closed out of Illustrator CC then relaunched it, and voila! There it was. Thank you for your support!

  • I installed the new iOS for iPad and iPhone now I can't connect to wifi

    I installed the new iOS6 and when I try to connect to wifi it directs me to a non-active link on apple.com and doesn't let me go anywhere from there.

    go to settings>Safari>Turn on Private Browsing
    make sure to close all browers.
    Connect to your wifi
    then you can turn off private browsing if you want.

  • Will Apple install a new harddrive for me?  If not, who can?

    Hi, I may as well give the full story...
    I've had my 27" iMac for 6 months or so now.  I have a 1 TB Sata harddrive with 4Gbs of Memory.  Out of my 1 TB, I partitioned 100 Gb to run Windows, purely for gaming purposes. However, I need more memory, so I started looking into buying some more Memory for the RAM (seems simple enough to do on your own) and a new harddrive to increase the overall memory capacity (doesn't seem as simple to do on your own).  I don't want to partition any more of my current memory from my Mac towards Windows because I do freelance art work using Photoshop and 3D packages.  And with me working on high resolution images, I don't want anything to start slowing down.
    So, basically, all I want to know is, can I take my iMac to an Apple Store, buy a hard drive and they do this for me (obvisouly with charge) or is there some recommened shops or retailers I should check out?  I honestly don't trsut myself installing a new hardrive after seeing a couple of video tutorials on how to do it!!
    Thanks

    For iMacs, you can't go out and buy a 3rd party drive. Apple has customized the firmware on the 2011 iMac hard drives that report the drive's temperature. A non-Apple drive will cause the iMac's fans to run at full speed. You can of course get a program like HDD fan control to set the fan speed yourself. However, no way is Apple or a certified Apple repair shop going to put a non-Apple drive into your iMac for you.
    2TB drives are an option on the 2011 27" iMacs, so you could go to an Apple store and see if they will upgrade the drive. However, even with AppleCare, you would still probably have to pay for the upgrade (drive cost and labor) yourself. Just call Apple and see what they have to say.
    Memory is easily user-installed - but don't buy from Apple as their memory is WAY overpriced. OWC (http://www.macsales.com/) has great prices on memory, or you could also check out Crucial.
    BTW, don't confuse RAM(memory) with hard drive(storage) - two different things. If I were you, I would install more memory and buy a fast Firewire external drive (at the moment, Thunderbolt drives are overly pricey) to supplement your internal drive.

  • [945 Series] A new cpu for my MB?

    While the performance of my P4 3.0 531 has been good, I'm wondering what you all think would be a good upgrade? I would like to keep my 945 Platinum board, but was thinking a new cpu would give me a little more power for games. Does "dual core" even matter when talking about gaming performance? Here in Winnipeg, you can get the P4 3.0 D830 for $400 Canadian dollars, or about $330 U.S. I switched from AMD to Intel 7 months ago because the game I was playing was older(2001), and my AMD didn't want to run it very stable. Now, I'm running newer games and while the difference isn't dramatic, it's enough for me to wonder if there is an Intel CPU out there for $400 bucks or less that would give me a noticeable upgrade over my current P4 3.0 531. Thank you.
                                                                                                       Doleman56.

     Sorry it so long for me to get back. I'll list everything I can think of below.
     MSI 945 Platinum board
     P4 [email protected] running 26c, 34c under load(Prime95 for 8 hours)
     2x512 sticks of Kingston HyperX DDR2 667 Dual channel
     ATI X700@475core/1020mem running 33c without OC'ing, 45c with OC'ing(3Dmark2001-21864,3Dmark2003-8908)
     80gig Seagate 7200rpm 8mg SATA
     Audigy 2 ZS
     Enermax 465 PSU
     Thermaltake Bigwater cooling kit for both CPU and GPU.
      If there is anything I have forgot, please let me know. I have recently read that dual core cpu's make no positive difference in gaming except for some newer games that support it. Is that true? Thanks again with any tips you have.
                                                                                                                           Doleman56
     

Maybe you are looking for