Is it possible to install a single component from the install dvd?

My install went very well, however the only problem is that the colorsync utility will  not launch. I would rather not do a complete reinstall of the entire system... ( particularly because of my shrinking HD). Can I do this?
Thanks in advance, Carl

Carl, you could try a couple things that may solve your problem.
1) Run "Repair Disk Permissions" using Disk Utility which is found in your UTILITIES folder inside your Application folder.
2) Startup your computer holding down the SHIFT key. Wait for the computer to startup completely, then restart again.
3) Find your ColorSync preferences and trash them. Perhaps a corrupt preference file is not allowing you to launch the app.
Good luck!

Similar Messages

  • Is it possible to create a single picture from the many that I have taken?

    I have about 100 pictures of dogs and cats,as well people and I was not sure if adobe elements 10 could do this. Many of the pictures are from family that has passed away and I wanted to make one large photo from all of them

    Unfortunately, you have posted to the Premiere Elements Forum. You want the Photoshop Elements Forum.
    They will give you the steps, but there are many ways to create a photo-collage. Those can differ a bit, but basically you will Open a background Image (can be a New Image w/ a colored background or an existing Image), and then the ones that you wish to include. Click on the Background Layer of each of those, and drag to the background Image. The next step is for Photoshop, and might not work in PSElements, but hit Ctrl+T (Free Transform), hold down Shift to constrain the Aspect Ratio, click one corner and drag that, to decrease/increase the size. Repeat.
    Good luck,
    Hunt

  • Is it possible to remove my hard drive from the Macbook and install it in a new Macbook Pro?

    I currently have a 2009 Macbook and am wanting to upgrade to a new Macbook Pro.  I have upgraded my hard drive in the macbook to a 500gb and have a duel boot with Windows 7 installed with Boot Camp along with other software that I do not want to lose.  Is it possible to remove my hard drive from the Macbook and install it in a new Macbook Pro?

    A much better solution is to hook your two Mac together and the first time you start the new Mac and it asks if you wish to recover data from another Mac, answer yes. This will invoke Setup Assitant which will do the job for you but intelligently.
    I know because I just used Setup Assitant. It worked like  a charm.
    Allan

  • Is it possible to exclude single contacts from the mute? For example: I want to hear when I recieve an SMS alert even if I mute my iPhone 4.

    Is it possible to exclude single contacts from the mute? For example: I want to hear when I recieve an SMS alert even if I mute my iPhone 4 (I am a fireman).

    No iPhone apps have access to the necessary API's to do so...they're all sandboxed.

  • Is it possible to delete a single page from a multi-page Adobe document?

    Is it possible to delete a single page from a multi-page Adobe document?

    With Adobe Acrobat yes - but not with the free Adobe Reader.

  • How do I scan multiple documents to a single pdf from the ADF on my MX922?

    How do I scan multiple documents to a single pdf from the ADF on my MX922?
    Solved!
    Go to Solution.

    Hi Riceburner1,
    Since you have had difficulty scanning using My Image Garden, you can scan using the IJ Scan Utility program that also comes with the printer.  To do this, please follow these steps:
    1. Place the documents in the ADF or on the platen glass of the printer.
    2. Start the IJ Scan Utility.
        For Windows 8.1:
        1. On your keyboard, press the Windows key.
        2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it, then continue with Step 3 below.
        For Windows XP:
        1. Go to your START MENU, then select ALL PROGRAMS, then CANON UTILITIES, then the IJ SCAN UTILITY program.
        2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears. Please continue with Step 3 below.
    3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
    4. Click the DOCUMENT SCAN option on the left pane of the window. In the Select Source field of the Scan Options section, select DOCUMENT (ADF/PLATEN) to scan items placed directly on the platen glass, DOCUMENT (ADF SIMPLEX) to perform single-sided scanning from the ADF, or DOCUMENT (ADF DUPLEX) to perform double-sided scanning using the ADF. You can then set the item size, resolution, etc. in the Scan Options section as desired.
    5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
         a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.  Please note that the filename that you give the document here will be the default filename for all items scanned until you change the file name.  If you leave the file name the same in the field, the scanned item will have a sequential number appended to the end of whatever name you give it.
         b.) In the DATA FORMAT field, use the drop-down arrow to select the desired option. If you are scanning a multipage document, select the PDF (Multiple Pages) option.
         c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
    6.  In the APPLICATION SETTINGS section of the window, please select the DO NOT START ANY APPLICATION option.  
    7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
    8. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed.   Once the scan is completed, scanned images are saved in the previously selected folder location specified in the SETTINGS... window.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Deleting a single item from the trash.

    Hello
    Is there a way to delete a single item from the trash, while leaving all other items in the trash?

    I don't believe so and I'm not sure why you would want to.
    Items should not be placed in the Trash unless you intend to delete the items. The Trash is not designed for and should not be used as a temporary storage location.

  • Is it possible to purchase an Applecare plan from the United States (LLA) for a MacBook Pro from Latin America (LZA)?

    Is it possible to purchase an Applecare plan from the United States (LLA) for a MacBook Pro from Latin America (LZA)?

    That's somewhat of a legal question which may not be able to be answered here by the uers/volunteers - I'd suggest you check with a local apple store.
    In the US, you can purchase it at any authorized reseller as long as you register it with the serial number of the computer within the first 364 days of ownership, but I do not know if a US product will work with one from another country.

  • Combine Files into a Single PDF from the Create button

    I’m using Adobe Acrobat 10.1.13 and trying to Combine Files into a Single PDF from the Create button. There are four file types .pdf .doc .xls .dwg the only file that appears in the Combine dialog box is the .pdf

    You'll need Acrobat Pro to accomplish the task.
    Acrobat Standard can only combine PDF files.
    Be well...

  • Possiblity to import any particular table from the full dmp file

    Hi,
    I am using Oracle 10G database.
    I a have dmp file.
    I need to import only a particular from that dmp file.
    Is there any possiblity to import a particular table from the whole dump.
    Thanks and Regards,
    Ansaf.

    Ansaf wrote:
    Hi,
    I am using Oracle 10G database.
    I a have dmp file.
    I need to import only a particular from that dmp file.
    Is there any possiblity to import a particular table from the whole dump.
    Thanks and Regards,
    Ansaf.
    You can specify like below example
    impdp hr TABLES=employees, xxx, xxxCheers

  • I can't install the software from the original DVD

    Welcome..
    I have purchased software:
    ADOBE INDESIGN CS 4 ME
    but I can't install the software from the original DVD after I change the hard disk and the operation system of my computer..
    after I click "Install"  the installation stop directly!!
    I need to download "ADOBE INDESIGN CS 4 ME - Arabic language support" for windows 7..
    thank you,,
    Best Regards,,

    Welcome..
    This is the answer from http://www.winsoft-intl.com:
    "Dear Majed,
    We would like to thank you for your email and we are sorry for the problem you
    face.
    Since Mid-October 2012 WinSoft are not able to support Adobe Product, You
    should contact Adobe support
    Best regards,
    Winsoft Support Team."
    And this is another answer from http://www.winsoft-intl.com:
    "Dear Majed,
    thank you for contacting us.
    Please note that since 2012 we are not Adobe reseller anymore and do not provide Support for Adobe products.
    Please contact Adobe directly or any authorized reseller in your area.
    Sorry for not being able to help you further.
    Kindest regards,"
    and Before that Adobe support service told me they can't give me links to download!! (or they do not have links to download!!)
    I can't believe all this happening with Adobe Toward one of its clients....!!

  • Making simple Cross desolves at the end of still photo clips from my library. Not making a clean disolve beteen. Single frames from the previous clip are flashing half way through the desolve. Did both a drag and drop and insert disolve.

    Making simple cross desolves at the end of still photo clips from my library.
    Not making a clean disolve between clips.
    Single frames from the previous clip are flashing half way through the desolve.
    Did both a drag and drop and insert disolve.

    Making simple cross desolves at the end of still photo clips from my library.
    Not making a clean disolve between clips.
    Single frames from the previous clip are flashing half way through the desolve.
    Did both a drag and drop and insert disolve.

  • I plan to buy an iphone 6 from New York. I am from India and shall be using the phone in India. Is it possible to get an unlocked iphone from the store? If yes, how much would it cost?

    I plan to buy an iphone 6 from New York. I am from India and shall be using the phone in India. Is it possible to get an unlocked iphone from the store? If yes, how much would it cost?

    It is going to be months before any unlocked iPhone 6s will be available.
    Also be aware that the iPhone purchased in the USA will only have warranty service in the USA. Any warranty service will require you to bring it back to USA.

  • HT201320 When using an iPad Air, is it possible to have my email removed from the server after downloading it? That's what I have been doing on my PowerBook and I would like to use my iPad as my primary email reader now.

    When using an iPad Air, is it possible to have my email removed from the server after downloading it? That's what I have been doing on my PowerBook and I would like to use my iPad as my primary email reader now.

    OK, I found the answer in the mail settings under the advanced button.

  • Is it possible to delete multiple e-mails from the inbox in the Mail app? If so, how do you do it?

    Is it possible to delete multiple e-mails from the inbox in the Mail app? If so, how do you do it?

    Yes, it is possible. When you are in the relevant inbox, tap the 'edit' button on right hand top corner. now select the mails you want to delete by tapping in the small circle next to the mail. keep selecting and in the end tap the red delete button that will show you how many are being deleted

Maybe you are looking for

  • Set Key Field in Import Manager

    Hi All, I have 2 fields in my source file(name,category) .category(look up Field) is the key field and name(display Field) is the matching field. I got file like this...... Name                  category 1                           A 1               

  • Expanding my dual 2.5ghz G5 with 2TB internal drive?

    I have been looking at the Seagate Barracuda LP ST32000542AS 2TB 5900 RPM 32MB Cache SATA 3.0Gb/s 3.5" Hard Drive. Will my computer run two of these 2TB drives?

  • Convert document into string with unicode

    I want to convert my document into string with all <,>,& to be converted into <, >, and &. When I am doing transformation, I am getting <,> etc. Can anybody suggest me how to do that. regards, Ranjan

  • How to judge pdf is reader enabled?

    Hello,     In my plug-in, want to know whether current document is reader enabled. How to achieve it? It's my pleasure if you can provide some codes. Thanks!

  • I can't open jpeg images. Is there an encryption setting?

    I am trying to view a jpeg image sent to my email on my iphone from a remote computer. The images will not appear. Is there an encryption setting?