Is it possible to install a sound Blaster X-FI at the same time as a EMU 1820 M on the same

Hi i need to isntall the both sound card on the same PC in order to take advantage to the music play, game enhancement of the X-Fi and also take advantage of the EMU 820m for music creation....
my question is :
is it posssible to install them at the same time if i have enough PCI slots remaining?
will it create some conflicts between the respectual drivers of the 2 cards?
Normally windows is able to have several sound card at the same time.. i already did it...
but i am afraid of drivers conflicts and some dll components conflicts...
thanks for you help
best regards,
show7

T-Storm, I'm having the same annoying delay on my X-Fi Extreme Gamer card, it's driving me nuts trying to fix it.
I noticed that if I un-tick the Dolbly Digital Li've in the console it goes away, along with the 5. sound, %$*&^^&%!
Is it he same with you? Try un-ticking the DDL while playing something and see if it stops the delay or not. At least it will see if the problem is the card, the connection, the optical cable, or DDL itself.
Dolby Digital Li've works in real-time so I fear that is causing the delay rather then a bad cable or connection. But I don't know if others are getting the same delay or not, if it is DDL then everyone should be getting it.
But, if they are not trying to play a digital signal at the same time as a anolog one they might not notice it.

Similar Messages

Is it possible to install a sound Blaster X-FI at the same time as a EMU 1820 M on the same PC?

Hi i need to isntall the both sound card on the same PC in order to take advantage to the music play, game enhancement of the X-Fi and also take advantage of the EMU 1820m for music creation....
my question is :
is it posssible to install them at the same time if i have enough PCI slots remaining?
will it create some conflicts between the respectual drivers of the 2 cards?
Normally windows is able to have several sound card at the same time.. i already did it...
but i am afraid of drivers conflicts and some dll components conflicts...
thanks for you help
best regards,
show7

T-Storm, I'm having the same annoying delay on my X-Fi Extreme Gamer card, it's driving me nuts trying to fix it.
I noticed that if I un-tick the Dolbly Digital Li've in the console it goes away, along with the 5. sound, %$*&^^&%!
Is it he same with you? Try un-ticking the DDL while playing something and see if it stops the delay or not. At least it will see if the problem is the card, the connection, the optical cable, or DDL itself.
Dolby Digital Li've works in real-time so I fear that is causing the delay rather then a bad cable or connection. But I don't know if others are getting the same delay or not, if it is DDL then everyone should be getting it.
But, if they are not trying to play a digital signal at the same time as a anolog one they might not notice it.

Audio and video skip after installing USB Sound Blaster Audigy 2

Hi community,?Since installing my USB Sound Blaster Audigy 2 NX, audio and video skip when being played with either windows media player, winamp, iTunes, neroshow, winDVD 7, creatives own media players etc. in fact anything I can try, won't work. Games are fine, in fact the sound is brilliant. I'd be really grateful for any feedback on this, not being able to listen to music is driving me crazy. Thanks.

Hello thebro90,I had the same problem.After tryed everything, uninstall, reinstall audio drivers, etc, I finally manage to solved it by updating the CPU drivers... I have a AMD Atlhon X2 4800+Never had the problem again.Best regards.
S?rgio

Computer will not boot when I install my Sound Blaster Live Ca

My computer wiil not boot when I put my sound blaster li've card in. Any body have any ideas that I could try?
Thanks
tbaker

Turn off your pc, remove the jumper near the battary for 5 seconds, then put the jumper back.
If it works go to BIOS and switch off (disable) Audio on Board or Sound on Board , (if you have it), then start your pc. Should work !!!
I hope it helps!!!

I updated my MAC to Mavericks and purchased iPhoto 9.5. Installed new version of iPhoto and installed using iPhoto Library Upgrade as directed. Each time I try open iPhoto I receive the same message.

I updated my MAC to Mavericks and purchased iPhoto 9.5. Installed iPhoto; however when I try to open iPhoto I receive The folling, "To open your library with this version of iPhoto, it first must be prepared. To prepare use iPhoto Library Upgrade". I have have downloaded and installed the upgrader, with no success.
I need to add that I am a senior and am not as computer savey as I should be. Therefore, i really need step by step help.

After you download the upgrader, you will need to go to your Applications folder and find the Utilities folder.
In there will be the iPhoto Library Upgrader (version 1.1). Open the application and follow the instructions. Should get you going.

Problem install driver sound blaster Omni surround 5.1

Hi, I have just bought this sound card. My computer is using win 7. But when I insert CD and install driver. Then I can't install it and the message below is showed:
"Setup is unable to detect a supported product on your system"
Please help me resolve it .
Thank you so much

Maybe you are connecting your Omni Surround 5.1 to a USB hub. How about trying to connect the device to another empty USB port?
Maybe you can try to disable your on board sound card in the bios to see if it works.

I Just installed my sound blaster audigy and cant record noth

i tried everything, when i tested the soundblaster hardware it didnt pick up nothing, then i put the mic in the stock recorder input,tested that hardware on my computer and that one worked. on my adobe audition(studio recording software) i changed the recording software to the soundblaster but still getting the same results..
HELP!!!
i tried re installing the drivers but nothing works and i know for sure its not the mike
AHHHHH

Hmm... you could st check if the SB is set as preferred play/recording device in system audio settings (start run mmsys.cpl) and then as suggested by creative, disable the onboard audio system. If still not working then, check the settings in surround mixer (or windows play/recording control panels) .. used source channel opened and recording source set properly. jutapa

I have tryed to instal upadate to firefox 6.0.2 like 5 times lately, and it goes through all the motions of doing an update, and even told me it was complete, then it still is the last version!

i have tried to install the newest version about 5 times now, everytime that i try, it goes through the steps, all the way to where it says finish! i have tried doing it standard install and custom install. i've tried doing it straight from other websites telling me that i need an updated version... ie. hotmail, facebook, and i've also gone to mozilla.com, and it always does the same thing, what am i doing wrong?

Something that you have installed has changed your User Agent or is keeping your User Agent from updating with the new install/update of Firefox. I suspect that it is Fast Browser Search which is shown as part of your User Agent. To get rid of Fast Browser Search do the following:
#Close Firefox (Firefox button > Exit '''''OR''''' File > Exit)
#Open the Vista Control Panel and remove/uninstall "Fast Browser search protection" and "Fast Browser Search" (MyWebTatoo)
#*See --> http://windows.microsoft.com/en-US/windows-vista/Uninstall-or-change-a-program
#*Your User Agent: ''Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.0.15) Gecko/2009101601 Firefox/3.0.15 (.NET CLR 2.0.50727; .NET CLR 3.0.30729; .NET CLR 3.5.30729) '''<u>FBSMTWB</u>'''''
#*What is a User Agent: http://en.wikipedia.org/wiki/User_Agent
#Start Firefox
#*Reset your User Agent following the instructions in the article below:
#**See --> [https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent Reset your user agent]
#*Check your Firefox version:
#**See --> [https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version Finding your Firefox version]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

INSTALLING LION for the first time how long does it take. The screen is white, nothing is happening?

Installing Lion on a new imac. How long does it take. The screen it white for awhile?

After downloading it, which can be like watching grass grow, it should take about 20-30 minutes. However, if it's a new computer, why would you installing it?

I canot import videos into photoshop.....i am using a macbook ,installed the quick time player...photoshop cannot open the files .....any idea ??????

....

Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro9,2
Prozessortyp: Intel Core i5
Prozessorgeschwindigkeit: 2,5 GHz
Anzahl der Prozessoren: 1
Gesamtanzahl der Kerne: 2
L2-Cache (pro Kern): 256 KB
L3-Cache: 3 MB
Speicher: 4 GB
Boot-ROM-Version: MBP91.00D3.B09
SMC-Version (System): 2.2f44
Seriennummer (System): C1MLM8FSDTY3
Hardware-UUID: 776CC881-6A8B-598F-8789-D26DE0DFB138
Sensor für plötzliche Bewegung:
Status: Aktiviert
i am not "a friend of my computer " ......i hope that information can help ?............

I installed adobe digital editions for the first time. But i cannot activate. always the same fealure: Aktivierungsserver-Fehler Code: E_ADEPT_REQUEST_EXPIRED ... but i'm shure, the date &time is correct. I tried all suggestions in the forum

Bei meinen Versuchen Adobe Digital Editions zu aktivieren kommt trotz richtiger ID und PW immer: "Aktivierungsserver-Fehler Code: E_ADEPT_REQUEST_EXPIRED ...
Was kann ich tun?

I have the same problem!! the ID adobe is right and the password as well! fuckk!!!!! please hlp us!!!

Fatal Crackling Noises in Sound Blaster Live!24-

I have a eMachines T400, on which I installed a Sound Blaster Li've! 24-bit, and it was working fine, until today, the card started to make this fatal crackling noises, is like I CAN ACTUALLY HEAR THE HARD DRIVE SPINNING, and WHEN YOU MOVE THE MOUSE, THE CARD ZAPS LIKE CRAZY. Any help? I have updated my drivers, and I will do a system restore to see if the CRACKLING FATAL noise goes away. Please HELP this is the SECOND TIME the SOUND CARD does this type of PROBLEM. Also, I have disabled onboard Audio, and the onboard audio works fine. I have an Intel Extreme Graphics2 3D (and it sucks, and the IRQ is ten units away from the SB.)? PLEASE HELP!
!!! Stuserver?*(SORRY about the CAPS, this thing is driving me crazy.)

Guess what it was, I had the Line-In unmuted, which allowed system noises to filter through there?
:smileysurprised:? And be played back through the card, and speakers??:smileysurprised:
Well, I muted Line-In and the noises where gonne.:smileyvery-happy:
Stuserver

Re-installing an old PCI Sound Blaster c

I have cobbled together a new machine, Gigabyte GA-M55 m/b, Athlon 64x2 5000 CPU, 2 gig of RAM. I was planning to re-use the PCI28 sound card since I don't need anything fancy. I installed the drivers from the original CD, and I think it worked because in Device Manager Creative Sound Blaster PCI (WDM) is shown as working correctly. However, I can't get a squeak out of the speakers. I went to the Creative download page. The Auto detect link didn't find any Creative product. Entering PCI 28, or the model number, CT4750, just produced "No updated drivers found."?The original machine was XP Home, this one is XP Pro, is that a problem?Any suggestions much appreciated. David

ES938S might (or might not be) be an ESS card, not Sound Blaster.
You didn't say what operating system you're using but the only drivers I could find were these:
http://www.soundcard-drivers.com/drivers/76/76692.htm
http://www.soundcard-drivers.com/drivers/57/57963.htm
http://www.bioticaindia.com/download.php?file=es938s?
http://www.esstech.com/techsupp/drivers.shtm
http://www.softwaredriverdownload.com/ess_es938s_driver.html
http://members.driverguide.com/driver/detail.php?driverid=76692&action=filfo
Message Edited by Adam_P on 08-23-2008 02:06 PMMessage Edited by Adam_P on 08-23-2008 02:09 PM

Blue Screen constantly after installing Sound Blaster Audigy 2 ZS Noteb

I don't knwo what to do, my computer is now completely non-functional, I am on my wifes laptop so that I can write this
I installed the Audigy 2ZS Notebook on my laptop and I went to reboot, after the reboot I get the blue screen every time after about 30 seconds, always.
i am now down a laptop and I can't reach CL tech support because they are "closed"
can anyone help me?
The blue screen is always "a process or thread crucial to the system operation has unexpectedly exited or been terminated"
I have a emachines M530
AMD .8ghz mobile
52mb ramATI Radeon IGP320M
AC97 On board audio
I am in safe mode right now trying to do some things to fix it, but nothing is workiing. I eveni deleted ALL sound drivers out of the system, that didn't work
I also tried downloading the latest install from Creative Labs and installing it, that didn't work either
I am have seen other forum posts about upgrading bios and all that, but I really don't have much desire to go into all that, fact is this software shoudl work and not mess up people computers

Well, in all honesty, I don't see how you can come on here telling me to use the email support when that is just what I did, and have YET to recieve an answer back.... I came on here expecting some sort of a response, from users or tech support, and I didn't get either, while at the same time I submitted a support ticket through the email support system, I didn't get a response there either. So, you "scolding" me for using this forum and getting frustrated is like slapping the thirsty african child for trying to drink from the ri'ver while the locked off water fountain is right next to him. I was venting my frustration from the lack of response through email on here so that other can maybe think twice before buying a creative product if they expect prompt support for their purchases.
I am not having the issue again, I used the downloaded updated drivers from the creative site. All is well, and while I dread if any issues actually do happen to come up again, it seems to be working fine.
btw, once again, let me state, that it is going on 2 days now and someone has yet to email me back from tech support. I am glad I was all right with formatting, I can't imagine what some of your other customers would do if they installed your software and their computer crashed.

AT-GPIB/TNT PnP and Sound Blaster 16 Clashing

Hi Group
The Story is:
I have had a AT-GPIB/TNT PnP on a old Pentium 75/Win 95 Machine doing some testing, and havn't had a problem with it.
I now wanted to install a Creative Sound Blaster (Vibra) 16, also PnP ISA, card for basic audio analysis measurements.
The problem is when the Sound Blaster card is installed the PnP BIOS doesn't recognise the GPIB card at all, even with PnP
disabled.
Has anybody seen this before?
Could it be that the PC can only handle 2 ISA PnP cards (there is also a PnP network card)?
Would I be better of with a PCI SB card.
Any help would be gratefull
Tim S

Tim,
I had similar struggles with a 1995 vintage Pentium. My ISA GPIB conflicted with PCI sound card and PCI network card. It
tooks me hours to hit upon a sequence of installing the cards, and manually locking in the resources, in order to get them all
working.
Some general suggestions: get back to a configuration that works, say without the sound card. Make note of the resources for
the network card and GPIB card. While your there, examine the other possibilities. You can select other GPIB resource
configurations and see what the I/O range, INT and DMA settings would be. For example, some GPIB resource configurations
don't use INT and DMA at all. Write all of this down.
Then install the sound card, without the GPIB. See what resources it wants, and explore what other configurations it might be
happy with. Sound cards are tricky, because they usually use a lot of resources because they have a lot of functions: wave,
midi, mixer, etc. Some also have "legacy drivers" that mimic the older DOS based sound cards, for backwards compatibility
with games. You may be able to install the sound card and then remove some of these "extra drivers."
With sound card working, and the network card working, reinstall the NI488 software. Then power down and install the GPIB
card. Reboot. You may get lucky and everything just works.
More likely, the GPIB will work and the sound card won't. Go check the GPIB card resources and you'll probably see that the
NI488 drivers snagged one or more of the INT or DMA channels that the sound card was using. Try a different GPIB
configuration, or manually edit the DMA and INT settings to NONE. Also check for I/O range conflicts. (Consult your written
list, because the conflicts won't show in Device Manger -- since the sound card's not working it's not using any resources!)
Hopefully, by telling Device Manager to NOT use Automatic Settings, you can get the GPIB working and still leave enough
resources available for the sound card. Which you will probably have to go back and reinstall, from scratch. Possibly a few
times before you get everything to fit.
How bad do you want that sound card ? :~)
Isn't (Microsoft) plug and play wonderful?
p.s. you might also consider using CMOS setup to disable any motherboard resources you are not using, for example a COM port
that's not connected to anything. Remember to write down EVERYTHING, you do so you can put it back if you have to.
Good luck!
Best Regards,
Mike T
Mike Tranchemontagne
Consulting Applications Engineer
TeraComm, Inc.
148 Main Street
Building A, 3rd Floor
North Andover, MA 01845
877-900-TERA (8372)
978-557-9490 (FAX)
603-598-4773 (Direct Line and Cell)
Timothy John Streeter wrote:
> Hi Group
>
> The Story is:
> I have had a AT-GPIB/TNT PnP on a old Pentium 75/Win 95 Machine doing some testing, and havn't had a problem with it.
> I now wanted to install a Creative Sound Blaster (Vibra) 16, also PnP ISA, card for basic audio analysis measurements.
> The problem is when the Sound Blaster card is installed the PnP BIOS doesn't recognise the GPIB card at all, even with PnP
> disabled.
>
> Has anybody seen this before?
> Could it be that the PC can only handle 2 ISA PnP cards (there is also a PnP network card)?
> Would I be better of with a PCI SB card.
>
> Any help would be gratefull
>
> Tim S
Attachments:
miket.vcf ‏1 KB

Is it possible to install a sound Blaster X-FI at the same time as a EMU 1820 M on the same

Similar Messages

Maybe you are looking for