Is it possible to install drivers without service pack

Hi all, I just got my creative zen 8gb player but I am having a problems syncing to the computer. My problem is that I can not install service pack or 2 because my windows somehow does not allow it. So my question is, is there any way I can install some sort of program that would detect the device and be able to transfer over music? Ive tried it on my sisters computer with sp2 and it worked perfectly but I need it to work with my computer which does not have sp2 and will not be able to. -Thanks in advance

Even if your friends product is legit it's in use & the license is only good for one computer. That's why you can't update it. Microsoft did not become the giant it is without safeguards built in the software. Yes you have an O.S. but you can't update it. Makes your system very vulnerable to attacks from viruses & malware because of it. If he is no longer using it then you may be able to get Microsoft to help you get it updated. As I'm sure you know suppose the copy is legit & you had to change the motherboard & other major components like the processor. You could have a problem with windows not validating the copy as legit. So call them or buy one.

Similar Messages

Link to download the server 2008 r2 enterprise without service pack

Hi,
Please provide the link to download the server 2008 r2 enterprise without service pack
Thank You!!

Hi,
Please check the below download links:
Windows Server 2008 R2 Enterprise Edition x64 (Full Install) VHD
http://www.microsoft.com/en-us/download/details.aspx?id=2227
Windows Server 2008 R2 Enterprise Edition x64 (Core Install) VHD
http://www.microsoft.com/en-in/download/details.aspx?id=18348
Windows Server 2008 R2 Evaluation (180 days)
http://www.microsoft.com/en-in/download/details.aspx?id=11093
And we could refer to the download center for more information:
download Center
http://www.microsoft.com/en-us/download/default.aspx
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Unable to install SQL 2005 Service Pack 3 (Unable to install Windows Installer MSI file)

I'm unable to install SQL 2005 Service Pack 3. This results in the following error message: Unable to install Windows Installer MSI file.
Could someone please help me. Thanks in advance!
=== Verbose logging started: 3-4-2009 9:33:00 Build type: SHIP UNICODE 4.05.6001.00 Calling process: d:\5ddfa356349ddf2e676c336d95c5\hotfix.exe ===
MSI (c) (E0:88) [09:33:00:404]: Resetting cached policy values
MSI (c) (E0:88) [09:33:00:404]: Machine policy value 'Debug' is 0
MSI (c) (E0:88) [09:33:00:404]: ******* RunEngine:
           ******* Product: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (E0:88) [09:33:00:404]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (E0:88) [09:33:00:404]: Grabbed execution mutex.
MSI (c) (E0:88) [09:33:00:419]: Cloaking enabled.
MSI (c) (E0:88) [09:33:00:419]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (E0:88) [09:33:00:419]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (28:28) [09:33:01:747]: Running installation inside multi-package transaction C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:28) [09:33:01:747]: Grabbed execution mutex.
MSI (s) (28:CC) [09:33:02:029]: Resetting cached policy values
MSI (s) (28:CC) [09:33:02:029]: Machine policy value 'Debug' is 0
MSI (s) (28:CC) [09:33:02:029]: ******* RunEngine:
           ******* Product: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
           ******* Action:
           ******* CommandLine: **********
MSI (s) (28:CC) [09:33:02:685]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (28:CC) [09:33:03:450]: File will have security applied from OpCode.
MSI (s) (28:CC) [09:33:03:841]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi' against software restriction policy
MSI (s) (28:CC) [09:33:03:841]: SOFTWARE RESTRICTION POLICY: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi has a digital signature
MSI (s) (28:CC) [09:33:04:841]: SOFTWARE RESTRICTION POLICY: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi is permitted to run at the 'unrestricted' authorization level.
MSI (s) (28:CC) [09:33:04:888]: End dialog not enabled
MSI (s) (28:CC) [09:33:04:888]: Original package ==> C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:CC) [09:33:04:888]: Package we're running from ==> C:\WINDOWS\Installer\3d3a713.msi
MSI (s) (28:CC) [09:33:05:497]: APPCOMPAT: looking for appcompat database entry with ProductCode '{53F5C3EE-05ED-4830-994B-50B2F0D50FCE}'.
MSI (s) (28:CC) [09:33:05:497]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (28:CC) [09:33:05:685]: MSCOREE not loaded loading copy from system32
MSI (s) (28:CC) [09:33:05:825]: Note: 1: 2203 2: C:\WINDOWS\Installer\2f1994e.msi 3: -2147287038
MSI (s) (28:CC) [09:33:05:825]: Opening existing patch 'C:\WINDOWS\Installer\e6ba0.msp'.
MSI (s) (28:CC) [09:33:05:825]: Note: 1: 2203 2: C:\WINDOWS\Installer\e6ba0.msp 3: -2147287038
MSI (s) (28:CC) [09:33:05:825]: Couldn't find local patch 'C:\WINDOWS\Installer\e6ba0.msp'. Looking for it at its source.
MSI (s) (28:CC) [09:33:05:825]: Resolving Patch source.
MSI (s) (28:CC) [09:33:05:825]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (28:CC) [09:33:05:825]: User policy value 'DisableMedia' is 0
MSI (s) (28:CC) [09:33:05:825]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Looking for sourcelist for product {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Adding {EE92F683-5F5C-4970-BB0B-9AC591B60268}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Now checking product {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Media is enabled for product.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (28:CC) [09:33:05:825]: SOURCEMGMT: Trying source \\NF04\d$\3db7739bf5c1bb9c50076c418420\HotFixSqlSupport\Files\.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 2203 2: \\NF04\d$\3db7739bf5c1bb9c50076c418420\HotFixSqlSupport\Files\SqlSupport.msp 3: -2147287037
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 1706 2: -2147483647 3: SqlSupport.msp
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Processing net source list.
MSI (s) (28:CC) [09:33:06:607]: Note: 1: 1706 2: -2147483647 3: SqlSupport.msp
MSI (s) (28:CC) [09:33:06:607]: SOURCEMGMT: Processing media source list.
MSI (s) (28:CC) [09:33:07:654]: SOURCEMGMT: Resolved source to: 'SqlSupport.msp'
MSI (s) (28:CC) [09:33:37:732]: Note: 1: 1314 2: SqlSupport.msp
MSI (s) (28:CC) [09:33:37:732]: Unable to create a temp copy of patch 'SqlSupport.msp'.
MSI (s) (28:CC) [09:33:37:732]: Searching provided command line patches for patch code {EE92F683-5F5C-4970-BB0B-9AC591B60268}
MSI (s) (28:CC) [09:33:37:763]: Note: 1: 1708
MSI (s) (28:CC) [09:33:37:763]: Product: Microsoft SQL Server Setup Support Files (English) -- Installation failed.
MSI (s) (28:CC) [09:33:37:763]: Windows Installer installed the product. Product Name: Microsoft SQL Server Setup Support Files (English). Product Version: 9.00.4035.00. Product Language: 1033. Installation success or error status: 1635.
MSI (s) (28:CC) [09:33:37:779]: MainEngineThread is returning 1635
MSI (s) (28:28) [09:33:37:888]: No System Restore sequence number for this installation.
This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.
C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\SQLSupport\x86\1033\SqlSupport.msi
MSI (s) (28:28) [09:33:37:888]: User policy value 'DisableRollback' is 0
MSI (s) (28:28) [09:33:37:888]: Machine policy value 'DisableRollback' is 0
MSI (s) (28:28) [09:33:37:888]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (28:28) [09:33:37:904]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (28:28) [09:33:37:919]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (28:28) [09:33:37:919]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (28:28) [09:33:37:919]: Restoring environment variables
MSI (c) (E0:88) [09:33:37:935]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E0:88) [09:33:37:935]: MainEngineThread is returning 1635
=== Verbose logging stopped: 3-4-2009 9:33:37 ===

This post should definitely help you
http://blogs.msdn.com/sqlserverfaq/archive/2009/01/30/part-1-sql-server-2005-patch-fails-to-install-with-an-error-unable-to-install-windows-installer-msp-file.aspx?CommentPosted=true
Feroz
Mark as Answer if it helps. This posting is provided "AS IS" with no warranties and confers no rights.

Error in Configuration Wizard after installing SharePoint 2013 Service Pack 1

Windows Server 2012 with latest updates and SharePoint 2013 with latest updates:
I installed SharePoint 2013 Service Pack 1 and when I run the configuration Wizard i get this error:
Error in Configuration Wizard
Resource id to be retrieved is PostSetupConfigurationFailedEventLog for language English (United States)
Resource retrieved id PostSetupConfigurationFailedEventLog is Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information
located at {0}, fix the problem, and run this configuration wizard again.
Leaving function StringResourceManager.GetResourceString
Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web
Server Extensions\15\LOGS\PSCDiagnostics_3_8_2014_23_55_49_686_1872915373.log, fix the problem, and run this configuration wizard again.
In event view I see this two errors:
1) First error
System
Provider
[ Name]
SharePoint 2010 Products Configuration Wizard
EventID
104
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-03-08T21:41:59.000000000Z
EventRecordID
135580
Channel
Application
Computer
ABC-SRV-WEB01.abc.local
Security
EventData
Failed to initiate the upgrade sequence. An exception of type System.MissingMethodException was thrown. Additional exception information: Method not found: 'Void Microsoft.SharePoint.WorkflowServices.IWorkflowService.Upgrade(System.Object,
System.String, Microsoft.SharePoint.Upgrade.SPLog)'. System.MissingMethodException: Method not found: 'Void Microsoft.SharePoint.WorkflowServices.IWorkflowService.Upgrade(System.Object, System.String, Microsoft.SharePoint.Upgrade.SPLog)'. at System.RuntimeTypeHandle.GetTypeByName(String
name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError,
Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName) at System.Type.GetType(String typeName) at Microsoft.SharePoint.Utilities.SPTypeSerializer.DeserializeType(String typeName,
Guid classId, Boolean bResolveMissingTypes) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.ResolveObjectAndClassVersions(SPLog log) at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags) at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
2) Second error
System
Provider
[ Name]
SharePoint 2010 Products Configuration Wizard
EventID
100
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-03-08T21:41:59.000000000Z
EventRecordID
135581
Channel
Application
Computer
ABC-SRV-WEB01.abc.local
Security
EventData
Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server
Extensions\15\LOGS\PSCDiagnostics_3_8_2014_23_41_9_710_572545016.log, fix the problem, and run this configuration wizard again.
Please advise on next steps.
How can I successfully install SP1?
Thanks,
Alex

could you please share the upgrade log file, so that we understand the error?
did you reboot your server after the installation of SP1?
also try to clear the Config cache on the servers and then try again?
you can run this command on the server its failing
Get-SPProduct -local
PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

TypeLoadException after install SharePoint 2013 Service Pack 1

After install SharePoint 2013 Service Pack 1 Russian I got the following error (approximate translation from Russian):
TypeLoadException: Method 'Upgrade' does not implemented in 'WorkflowServiceApplicationProxy'
Any ideas how to workaround it?

Hi,
Please post your ULS logs here.
Please remember to click 'Mark as Answer' on the answer if it helps you

Windows 2008 R2 Server without Service Pack 1 was flag "Not Required" during the SCCM patching/deploying SP1 for 2008

Dear Brothers,
I come to a scenario were one of our Windows 2008 R2 Server without Service Pack 1, was Flag under SCCM 2007 Reports Update Status for Service Pack 1 deployment to be "Not
Required" which definitely inaccurate.
What I want to know what are the conditions for the Software Update to send a status to SCCM Server that the Service Pack is “Not
Required” instead of the other way around?
Is there anyone that can guide me to any KB Article regarding this behavior?
Regards,

Yes, I know this is an old post, I’m trying to clean them up. Did you figure this out, if so how?
I have seen this before and what I have done is manually applied the SP1 to the server. Only then did the error show up as why SP1 didn’t apply. After fixing the error, CM was apply to apply SP1 and other SU to the server.
http://www.enhansoft.com/

How to install drivers without Internet?

Hello
I have installed Windows 7 (downgraded from 8) with USB flash disk and faced to this problem - I can not install drivers, including USB and Ethernet controller, that is my laptop does not have access to the Internet and does not see USB-devices. How can I install drivers in this situation if the laptop even has no DVD-ROM?

Hi @Johannes_Russeu ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY 15-j001er Notebook and needing Windows 7 drivers. Here is a link to your drivers page.
You need to check in the device manager for your specific drivers.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Installing Windows 7 Service Pack 1

Hello
I am unable to install Service pack 1 for Windows 7 home premium (OEM edition) and a couple of other updates, in the past the macbook has downloaded and installed windows updates fine, In this instance it downloads but I get a error message error 800B0100. I have tried everything down the windows path but have got nowhere, a search on the web suggests that while some people install this update on a Bootcamp partition others cannot.
Can anyone help.
Thanks
Stephen

You have OS 10.7 but not Bootcamp 4?
Friend of mine on OEM non Mac has similar long standing SP1 problem; as a possible/last solution,
http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/64611492- 58b5-49d7-845e-59fb53c1c48f/
I see from search for W 7 SP1 error 800B0100 in Windows forums:
rename the \Windows\SoftwareDistribution folder to \Windows\SoftwareDistribution.old.
I learned (by doing it) that you can rename outside of safe mode in same login session if you disable Windows Update completely via control panel. Then you could turn W. Update back on & try again.
You will see more on this from Microsoft itself by search for: rename \Windows\SoftwareDistribution

Cannot install windows 7 service pack 1 on my HPE-400z desktop

I have an HP hpe-400z desktop pc. It is running windows 7 home premium operating system. Ever since Windows 7 SP1 came out, my pc has been trying to install it. Every time it tries to install, during the boot process the install fails and the system reverts back to original settings. I get the error message E_FAIL (0x80004005). I have tried letting the automatic updater install this sp1 and I have also downloaded it, running the update, and then the same thing happens. I have tried it without my security software running and get the same result. This has been going on for so long now that I do not even bother to watch my machine boot up,- I know it is going to boot twice due to the failure of installing sp1. Please help!

I would suggest you download the Win 7 Readiness Tool (see list of OS versions) located here
The System Update Readiness Tool can help fix problems that might prevent Windows updates and service packs from installing. For example, an update might not install if a damaged system file prevents the update from recognizing the version of Windows that's running on your computer.
If your computer is having problems installing an update or a service pack, download and install the tool, which runs automatically. Then, try installing the update or service pack again.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Slipstreaming: Creating a WindowsXP Install CD with Service Pack 2

Hi,
Could someone who has done this using a Mac, and knows how, please give a step by step to making this CD? All the instructions online show how to do it from a PC running Windows. I have no clue how to do it on a Mac. Could someone please explain? I have a legitimate copy of XP Home, and have downloaded WindowsXP-KB835935-SP2-ENU.exe. Now What?
Thanks!

You can use the command line mkisofs to create a disc image after the slipstreaming and then burn with Disc Utility. The only process that really requires a Windows machine is the "applying SP2 patch to the data from the XP install disc" part of the operation since it actually runs a Windows executable (the service pack executable) on the XP install disc (instead of what you normally do which is install SP2 on your live installed version of XP)
I used VirtualPC for that ONE step, and did everything else in OS X.
As for those that did SP1 installs, I installed from an original Volume license Windows XP Professional CD (not SP 2) and managed to boot Windows and install some drivers, but got lots of hangs and had to force reboot a couple times. You cannot install SP2 afterwards, hence the SP2 requirement for Boot Camp.
(posting this from XP on my MBP )

Install the latest Service Pack and Cumulative Update

Hi Expert,
I am installing SAP on SQL SERVER 2008 R2. The database software installation is done,but as per
installation guide it is recommending to install "Service Pack and Cumulative Update" as SAP Notes 62988
Please suggest me if i donot install service pack then will it impact our installation?
Please relply ASAP.

Its always recommanded to have your database at patch level and cummulative update supported by SAP.
If you don't perform now then you have to take again downtime to perform this activity.
Regards,
Nikunj Thaker

ITunes problems after trying to install Windows XP service pack 2

Hey guys, I've been having trouble with my iTunes among other programs recently, and I was wondering if anyone might be able to help. Basically, my iTunes has been acting strangely ever since I tried upgrading my Windows XP system with Service Pack 2. When it ran through installation, it got all the way through. However, once I rebooted the computer, it told me it was unable to complete due to an unstable system. So it told me to uninstall the software, and I removed it from my program list.
Unfortunately, once I complete removed it from my hard drive, several programs on my machine started to malfunction. Now, whenever I try to play iTunes, it just stops working all of a sudden along with the rest of the sound software on this computer.
The big problem is, I forgot to back up my system before I did all this, so now I'm worried that I'm stuck with this dysfunctional hybrid of a computer system. So now, I've tried reinstalling the old Service Pack 1 onto the computer, but it always seems to cancel in mid-installation.
I know this is probably of a topic that should be posted, on an XP forum, but I was hoping that maybe someone on here might be able to give me some advice on how to solve this problem. If not for my computer, than perhaps at least for my iTunes trouble.
Thanks to all who might be able to help.

The reason I would think your iTunes stopped working is because your system is no longer compatible as iTunes requires Windows XP SP 2 in order to work properly.
If you want to back up your iTunes content then I would suggest opening My Documents>My Music and choose the whole iTunes folder and move it to an external drive. That is normally where all your content is saved, unless you didn't have 'Copy files to iTunes Music folder when adding to library' selected in iTunes then you might want to use the whole My Music folder as your backup.

My Computer knows iPod without Service Pack 2 but not with it.

What should I do? I updated my Windows with the latest service pack. Now, it doesn't recognises my iPod... (I wish I had a Mac) (I have a 5G iPod)

What doesnt see the ipod?
iTunes
Or windows?
Take a look at this and see if it helps.
Pod missing in "My Computer" or in iTunes on Windows

"Error: You have previously installed drivers without rebooting&qu

I tried to install audigy 2 drivers, and while the installation was processing i accidently pressed the reboot button...
Then I tried again and then pop ups this error:
I tried with CCleaner and Driver Cleaner and it doesn't work
PLEASE Help me
I can't stand my comp. without sound!!!!!

. put cd and try again?2. add remove + check device manager for question mark?3. window explorer -> program -> if u see uncreative folder just delete?4. try step ?5 if cannot? - > format?btw driver cleaner is to be used in safe mode?6. start? -> run -> type services.msc -Check window audia and events log is set to automatic or not?Message Edited by rockerz on 2-03-200705:59 AM
Message Edited by rockerz on 2-03-200706:9 AM

Is it possible to install PVM without DHCP in local network?

Hi!
We have main DHCP server in our company and i don't have access to it. So, it's difficult to install PVM from Network or i don't understand how to do in.
I created kickstart file and shared OEL DVD, also i configured VM as:
uuid = '0004fb00-0006-0000-db66-e8f031d2e557'
bootloader = '/usr/bin/xenpvboot'
vif = ['mac=00:21:f6:00:00:13,bridge=192.168.18.0']
name = '0004fb0000060000db66e8f031d2e557'
OVM_description = ''
guest_os_type = 'linux'
OVM_simple_name = 'pvm3'
on_poweroff = 'destroy'
boot = 'nc'
vfb = ['type=vnc,vncunused=1,vnclisten=127.0.0.1']
on_crash = 'restart'
on_reboot = 'restart'
vcpus = 2
cpu_weight = 27500
OVM_os_type = 'Oracle Linux 5'
memory = 4096
cpu_cap = 0
OVM_high_availability = False
disk = ['file:/OVS/Repositories/0004fb00000300007ab59846cb716517/VirtualDisks/0004fb0000120000193b8eda68cef44c.img,xvda,w', 'file:/OVS/Repositories/0004fb00000300007ab59846cb716517/ISOs/0004fb000015000013989eb97049c582.iso,xvdb:cdrom,r']
maxmem = 4096
bootargs = '--args network device eth0 bootproto static ip 192.168.18.182 netmask 255.255.255.0 --gateway 192.168.18.254 ks=http://192.168.12.93/KickStart.OEL.profiles/ks.cfg http://192.168.12.93/OracleLinux/DVD/'
VM starts but nothing happens. VM Manager shows that it has "Starting" state. Http server doen't have any request from my VM.
xend.log:
[2012-01-30 16:40:11 5530] DEBUG (XendDomainInfo:104) XendDomainInfo.create(['vm', ['name', '0004fb0000060000db66e8f031d2e557'], ['memory', 4096], ['maxmem', 4096], ['on_poweroff', 'destroy'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['on_xend_start', 'ignore'], ['on_xend_stop', 'ignore'], ['vcpus', 2], ['uuid', '0004fb00-0006-0000-db66-e8f031d2e557'], ['cpu_cap', 0], ['cpu_weight', 27500], ['oos', 1], ['bootloader', '/usr/bin/xenpvboot'], ['bootloader_args', '--args network device eth0 bootproto static ip 192.168.18.182 netmask 255.255.255.0 --gateway 192.168.18.254 ks=http://192.168.12.93/KickStart.OEL.profiles/ks.cfg http://192.168.12.93/OracleLinux/DVD/'], ['image', ['linux', ['videoram', 4], ['tsc_mode', 0], ['nomigrate', 0]]], ['s3_integrity', 1], ['device', ['vbd', ['uname', 'file:/OVS/Repositories/0004fb00000300007ab59846cb716517/VirtualDisks/0004fb0000120000193b8eda68cef44c.img'], ['dev', 'xvda'], ['mode', 'w']]], ['device', ['vbd', ['uname', 'file:/OVS/Repositories/0004fb00000300007ab59846cb716517/ISOs/0004fb000015000013989eb97049c582.iso'], ['dev', 'xvdb:cdrom'], ['mode', 'r']]], ['device', ['vif', ['bridge', '192.168.18.0'], ['mac', '00:21:f6:00:00:13']]], ['device', ['vkbd']], ['device', ['vfb', ['vncunused', '1'], ['vnc', '1'], ['vnclisten', '127.0.0.1'], ['xauthority', '//.Xauthority']]]])
[2012-01-30 16:40:11 5530] DEBUG (XendDomainInfo:2576) XendDomainInfo.constructDomain
[2012-01-30 16:40:11 5530] DEBUG (balloon:220) Balloon: 15733844 KiB free; need 16384; done.
[2012-01-30 16:40:11 5530] DEBUG (XendDomain:464) Adding Domain: 1
[2012-01-30 16:40:11 5530] DEBUG (XendDomainInfo:2886) XendDomainInfo.initDomain: 1 27500
[2012-01-30 16:40:11 6246] DEBUG (XendBootloader:113) Launching bootloader as ['/usr/bin/xenpvboot', '--output=/var/run/xend/boot/xenbl.1505', '--args', 'network', '--device', 'eth0', '--bootproto', 'static', '--ip', '192.168.18.182', '--netmask', '255.255.255.0', '--gateway', '192.168.18.254', 'ks=http://192.168.12.93/KickStart.OEL.profiles/ks.cfg', 'http://192.168.12.93/OracleLinux/DVD/', '/OVS/Repositories/0004fb00000300007ab59846cb716517/VirtualDisks/0004fb0000120000193b8eda68cef44c.img'].

Yes, you are a genius!!!
It works! Thanks a lot!
Is it possible to update OVS documentation? It think, it's quite important to have such example of configuration.
Final vm.cfg:
uuid = '0004fb00-0006-0000-db66-e8f031d2e557'
bootloader = '/usr/bin/xenpvboot'
vif = ['mac=00:21:f6:00:00:13,bridge=192.168.18.0']
name = '0004fb0000060000db66e8f031d2e557'
OVM_description = ''
guest_os_type = 'linux'
OVM_simple_name = 'pvm3'
on_poweroff = 'destroy'
boot = 'nc'
vfb = ['type=vnc,vncunused=1,vnclisten=127.0.0.1']
on_crash = 'restart'
on_reboot = 'restart'
vcpus = 2
cpu_weight = 27500
OVM_os_type = 'Oracle Linux 5'
memory = 4096
cpu_cap = 0
OVM_high_availability = False
disk = ['file:/OVS/Repositories/0004fb00000300007ab59846cb716517/VirtualDisks/0004fb0000120000193b8eda68cef44c.img,xvda,w', 'file:/OVS/Repositories/0004fb00000300007ab59846cb716517/ISOs/0004fb000015000013989eb97049c582.iso,xvdb:cdrom,r']
maxmem = 4096
bootargs = '--kernel images/xen/vmlinuz ramdisk images/xen/initrd.img args="ksdevice=eth0 network bootproto=static ip=192.168.18.182 netmask=255.255.255.0 gateway=192.168.18.254 ks=http://192.168.12.93/KickStart.OEL.profiles/ks.cfg" http://192.168.12.93/OracleLinux/DVD/'

Is it possible to install drivers without service pack

Similar Messages

Maybe you are looking for