Is it possible to install Exchange Management Shell on a workstation to manage my Exchange 2013 server?

I don't want to log into my Exchange 2013 every time when I need the Exchange Management Shell. Is that possible I can just install it on my workstation and then remote access to it? Thanks.
Lawrence Fung

Correct - it is in the article Amy references, but is in the bulleted section at the top
The computer you install the management tools on must have a supported operating system (such as Windows Server 2012 or Windows 8), have enough disk space, be a member of an Active Directory domain, and satisfy other requirements. For information about system
requirements, see
Exchange 2013 System Requirements.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne 
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

  • How to: Get a list of mail users by using the Exchange Management Shell

    Hello every one, quick question: When I run this code below for VB, how will I see the results of the program? Is there anyway I can make the results appear in a message box?
    Function GetUsersUsingBasicAuth( _
        ByVal LiveIDConnectionUri
    As String, ByVal ScehmaUri
    As String, _
        ByVal Credentials
    As PSCredential, ByVal
    Count As Integer)
    As Collection(Of PSObject)
        Dim ConnectionInfo
    As WSManConnectionInfo = _
            New WSManConnectionInfo(New Uri(LiveIDConnectionUri), ScehmaUri, Credentials)
        ConnectionInfo.AuthenticationMechanism = AuthenticationMechanism.Basic
        Dim RemoteRunspace
    As Runspace
        RemoteRunspace = RunspaceFactory.CreateRunspace(ConnectionInfo)
        Return GetUserInformation(Count, RemoteRunspace)
      End Function
    Function GetUserInformation(ByVal
    Count As
    Integer, ByVal RemoteRunspace
    As Runspace) As Collection(Of PSObject)
        Dim RemotePowerShell
    As PowerShell = PowerShell.Create
        RemotePowerShell.AddCommand("Get-Users")
        RemotePowerShell.AddParameter("ResultSize",
    Count)
        ' Open the remote runspace on the server.
        RemoteRunspace.Open()
        ' Associate the runspace with the Exchange Management Shell.
        RemotePowerShell.Runspace = RemoteRunspace
        ' Invoke the Exchange Management Shell to run the command.
        Return RemotePowerShell.Invoke
    End Function

    All you need to do is enumerate through the Collection returned eg
    Dim commandResults As Collection(Of PSObject)
    commandResults = RemotePowerShell.Invoke()
    For Each obj As PSObject In commandResults
    MessageBox.Show(obj.Properties("DisplayName").Value.ToString())
    Next
    Cheers
    Glen

  • Is it possible to install photoshop 6.0 (CD) on macbook pro?

    Is it possible to install photoshop 6.0 (CD) on macbook pro?
    Is it possible to install photoshop 5.0 (CD) on macbook pro?

    March 23, 2013
    Adobe
    To whom it may concern,
    I'm not sure how unique my situation is but let me briefly explain.  In a prior life I was a photographer (about 12 years ago).  At that time I had purchased Photoshop and upgraded it a couple of times.  When I stopped photographing I was up to photoshop 5 with the CD and appropriate serial numbers.  Recently I decided to get back to photography and went to install Photoshop 5 on my computer (MacBook Pro) but it was not compatible.  What can I do to use it.  I do not really want a newer version especially at full cost.  My first preference is to somehow install Photoshop 5 even if there was some cost to the adaptation process.  If this is not possible (hard to believe, as we've put men on the moon) then at some compromise cost I am willing to upgrade.  But again, this is not my first choice.  As I completely understand that you would not want to allow customers to skip numbers of additions at a fixed upgrade cost, you must understand that I really don't want or need the current version.  I simply want to be able to use what I have purchased, even if it is out-dated. 
    I look forward to hearing from you, as I would like to solve this issue legitimately.
    Sincerely,
    Erik Simmons

  • Error connecting to the Exchange Management Shell - and no one can connect w/ Outlook or OWA

    Whew - I'm not sure what's happening but everything blew up this morning when another admin rebooted the server...
    I can't connect to the Exchange Management shell - I get this:
    [<servername>.<domainname>.local] Connecting to remote server failed with the following error message : WS-Management cannot process the request. The operation failed because of an HTTP error. The HTTP error (12152) is: The server returned
    an invalid or unrecognized response . For more information, see the about_Remote_Troubleshooting Help topic. + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportException   
    + FullyQualifiedErrorId : PSSessionOpenFailed
    And in digging around, re-running the sharepoint PSConfig appeard to be a fix for a related issue I was reading about, and since there didn't seemt to be any harm in running it again (I did find the technote and had manually ran it after SP1 was installed)
    I ran it and this is an excerpt from the log:
    09/08/2011 16:48:05  1  INF                      Entering function Farm.Clear
    09/08/2011 16:48:05  1  INF                        Entering function CentralAdminServiceInstance.Reset
    09/08/2011 16:48:05  1  INF                        Leaving function CentralAdminServiceInstance.Reset
    09/08/2011 16:48:05  1  INF                      Leaving function Farm.Clear
    09/08/2011 16:48:05  1  INF                    Leaving function Farm.TryIsJoinedToFarm
    09/08/2011 16:48:05  1  ERR                    A failure has been encountered when trying to load the Farm
    09/08/2011 16:48:05  1  INF                    Entering function StringResourceManager.GetResourceString
    09/08/2011 16:48:05  1  INF                      Resource id to be retrieved is FarmIsJoinedFailureWhileUsingCommandLine for language English
    (United States)
    09/08/2011 16:48:05  1  INF                      Resource retrieved id FarmIsJoinedFailureWhileUsingCommandLine is Failed to detect if this
    server is joined to a server farm.  Possible reasons for this failure could be that you no longer have the appropriate permissions to the server farm, the database server hosting the server farm is unresponsive, the configuration database is inaccessible
    or this server has been removed from the server farm.  To diagnose this problem further, review the extended error information located at {0}.  If this problem persists, run this wizard again to disconnect from the server farm.  After disconnecting,
    run the wizard again to create or connect to an existing server farm.
    So I seem to have some massive permissions issues.  Is there any kind  of a technote or walkthrough that can step me through verifying what permissions should be where?  The connect to Internet Wizard won't complete complaining it can't configure
    the email and to run it again.  That caused the Set Up your Internet Address wizard to not run, complaining you have to run the connect to Internet wizard.

    Is there any update on the issue?
    No.  I gave up and rebuilt the server - this time inside of HyperV!
    It's definetly a problem of some sort of a problem with IIS, that much is obvious.  It's frustrating, because by not being able to get to the Exchange Management Shell it made recovery of the Exchange database VERY hard. 
    The rest of this will be a bit of a rant so feel free to stop reading here if you like :) 
    I'm pretty unhappy with the fragility of recovering an Exchange databas in general - there is a VERY narrow range of parameters to get mail back - and very many things that can prevent you from recovering.  Had I suspected that there would have been
    1/10th the pain in recovering mail, before I tried to connect the clients to the new exchange I would have made .PST files for everyone - which would have worked since they all had cached .OST files, even if the clients couldn't talk to Exchange due to the
    aformentioned IIS problems.  Anyway, it was a total nightmare, extremly frustrating and while many of my problems were probalby self-induced, the total lack of a coherant disaster recovery strategy has at least motivated me to be EXTREMLY diligent about
    backups - and not just backups, but ensuring that the SBS backup is working and occasionally firing up a clone VM and doing a restore to ensure the one of two ways Exchange can be successfully backed up are indeed working.
    With such an extreme dependence on IIS for client acces AND managemet of Exchange, there really, REALLY needs to be more documentation on how Exchange uses IIS, how to step through the registry and other low-level internals to troubleshoot and compare. 
    I must have read just about every technet article and literallly hundreds of blog entries on recovering Exchange - but the lack of information about Exchange's integration and dependancies on IIS were the most frustrating of all.  Talk about putting all
    your eggs in one basket and a huge single point of failure ticking time bomb!
    And I think it was either SharePoint Express or an accidently applied SharePoint Express update that blew up IIS.  A few days after that update got applied the server was restarted, and that's when everything went completly sideways.  That's whats
    even more frustrating - that so many applications are so dependant on a now essential layer is frustrating.  I realize SBS is an exception to the rule - generally Exchange is installed on it's own server and this isn't a remote possiblity, but any update
    (or installer) that messes with IIS really needs to check the environment it's going to go into, and if there is anything at all that could possibly cause a compatibility issue, the update should "fail open" and not install wtihout explicit confirmation
    from the admin that he wants to isntall it.  Then again, another admin either ran the installer or approved the SP Express update so that still may not have saved me  - but if he saw an explicit warning he probably would not have just clicked through
    it!
    Oh well - thanks for reading if you went all the way through.  I'm just glad that it's now over :)

  • Connect to Exchange 2007 Mailboxes with Exchange 2013 Management shell

    Hello,
    I was wondering if it is possible to use the Exchange 2013 Management Shell with the older version of Exchange 2007. When I run the console now it give me an error saying no exchange servers are available in the Active Directory site. When I use Exchange
    management shell for 2007 the errors do not appear. Wondering if the management shell is backwards compatible.
    Thanks,

    No. your management shell MUST be the same roll-up version of exchange. I have applied updates and learned the hard way to block all updates that go beyond the server version you are
    running.
    http://social.technet.microsoft.com/wiki/contents/articles/240.exchange-server-and-update-rollup-bui...
    To this end, you can use the same installation media that was used to install your Exchange server "Provided you are hosting your own", just install the management console instead of the whole thing,

  • After fresh installation of exchange 2013 I am not seeing Exchange Management shell EMS and EAC is redirecting to OWA

    I am trying to upgrade my Exchange 2010 environment to exchange 2013. I was able to install exchange 2013 on a VM running windows 2012 R2 without any errors, however after installation I am not able to login to Exchange admin center as it keeps redirecting
    to OWA and I am not seeing Exchange management shell.

    Hi,
    What’s the version of your Exchange 2013 Server. Try updating it to the latest version first.
    If you were using an account which is still on the Exchange 2010 MBX server, this could be an issue. Try creating a new admin account on the Exchange 2013 and check if the issue still happens
    to it.
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • 2013 Exchange, Can't connect to Exchange Management Shell. It cannot determine the content type of the HTTP response from the destination computer.

    The following error occurs.
             Welcome to the Exchange Management Shell!
    Full list of cmdlets: Get-Command
    Only Exchange cmdlets: Get-ExCommand
    Cmdlets that match a specific string: Help *<string>*
    Get general help: Help
    Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
    Show quick reference guide: QuickRef
    Exchange team blog: Get-ExBlog
    Show full output for a command: <command> | Format-List
    Tip of the day #0:
    Did you know that the Identity parameter is a "positional parameter"? That means you can use:
     Get-Mailbox "user" instead of: Get-Mailbox -Identity "user"
    It's a neat usability shortcut!
    VERBOSE: Connecting to mail1.dorothy.local.
    New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
    message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
    the destination computer. The content type is absent or invalid. For more information, see the
    about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
    Exception calling "GetComputerSite" with "0" argument(s): "The Specified directory object cannot be found."
    At C:\Program Files\Microsoft\Exchange Server\V15\bin\ConnectFunctions.ps1:164 char:2
    +     $localSite=[System.DirectoryServices.ActiveDirectory.ActiveDirectorySite]::GetC ...
    +    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
        + FullyQualifiedErrorId : ActiveDirectoryObjectNotFoundException
    Failed to connect to an Exchange server in the current site.
    Enter the server FQDN where you want to connect.: mail1.dorothy.local
    VERBOSE: Connecting to mail1.dorothy.local.
    New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
    message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
    the destination computer. The content type is absent or invalid. For more information, see the
    about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
    Randy Cheek

    Good Morning,
    Log into the server with an account that has appropriate Exchange rights, not a local account.  
    Note: By default - Domain Admins don't have Exchange rights.
    Dame Luthas, ITILv3, MCSE Messaging 2013, MCSA, MCITP
    My Technical Blog: http://thelifestrategist.wordpress.com
    Discipline is the Difference between Goals and Accomplishments
    If this post is useful, please hit the green arrow on the left & if this is the answer hit "mark as answer"

  • Is there Exchange 2013 view Exchange Management Shell command similar to Exchange 2010

    Hi,
    Is there anything similar in Exchange 2013 (Please refer the image).  In Exchange 2010 if you make any changes via Management console you could go to "View Exchange Management Shell Command Log" and see what shell command it ran in the background.
     It was very handy to copy shell command from here and then run it from shell in case you need to make bulk changes rather than try to find out the shell command from scratch.
    I was wondering if there is anything similar in Exchange 2013.
    Thanks,
    Raman

    Probably in SP1...
    Keep your finger cross ;)
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Possible to install Oracle EBS R12 on existing (shell) Oracle 11.1.0.7 DB?

    Is it possible to install Oracle EBS R12 on existing (shell) Oracle 11.1.0.7 DB?

    user4434301 wrote:
    OK...I could be crazy, but I didn't see doing an installation of EBS R12 on a pre-existing 11.1.0.7 DB in there anywhere. It looked like the regular install directions. Are you sure?If you mean to say if you can install R12 with an existing EBS/standalone database then the answer is No.
    If you mean to say if you can lay down R12 software (to upgrade from 11i) with an existing EBS database then the answer is Yes.
    I hope it is clean now.
    Thanks,
    Hussein

  • Exchange Management Shell does not connect to server

    Hi,
    Can't connect to server with Exchange Management Shell.
    Restart, IISRESET etc. does not help.
    Method :
    $Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri EXCHSERVER.CONTOSO.COM/PowerShell/ -Authentication Kerberos
    Import-PSSession $Session
    also does not work.
    Error:
    VERBOSE: Connecting to EXCHSERVER.CONTOSO.COM.
    New-PSSession : [EXCHSERVER.CONTOSO.COM] Connecting to remote server EXCHSERVER.CONTOSO.COM failed with the following
     error message : The WS-Management service cannot process the request. The load quota for the system has been exceeded.
     Send future requests at a slower rate or raise the system quota. For more information, see the about_Remote_Troublesho
    oting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : -2144108120,PSSessionOpenFailed
    VERBOSE: Connecting to EXCHSERVER.CONTOSO.COM.
    New-PSSession : [EXCHSERVER.CONTOSO.COM] Connecting to remote server EXCHSERVER.CONTOSO.COM failed with the following
     error message : The WS-Management service cannot process the request. The load quota for the system has been exceeded.
     Send future requests at a slower rate or raise the system quota. For more information, see the about_Remote_Troublesho
    oting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : -2144108120,PSSessionOpenFailed

    Run a normal powershell
    Import the Exchange server 2010 snapin and get the current certificates
    Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010
    PS C:\Users\Administrator> Get-ExchangeCertificate
    Thumbprint Services Subject
    084B2597D626C5361CF8002FADBEA83B9144143D IP.WS. CN=trapoist.com, OU=Domain Control Validated
    76C7987A7A9C7F9917A6A1B208220CA768CE0D23 IP..S. CN=trapoist.com, OU=Domain Control Validated
    Get-ExchangeCertificate | select *
    AccessRules : {System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKeyAcces
    sRule, System.Security.AccessControl.CryptoKeyAccessRule}
    CertificateDomains : {trapoist.com, www.trapoist.com, autodiscover.trapoist.com, IMAP.trapoist.com...}
    CertificateRequest :
    IisServices : {IIS://MAILTRAPOIST/W3SVC/1}
    IsSelfSigned : False
    KeyIdentifier : 36A0EC10B4503C5DBF51815A50F442D9404BE04E
    RootCAType : ThirdParty
    Services : IMAP, POP, IIS, SMTP
    Status : Valid
    SubjectKeyIdentifier : 36A0EC10B4503C5DBF51815A50F442D9404BE04E
    PrivateKeyExportable : True
    PublicKeySize : 2048
    ServicesStringForm : IP.WS.
    Archived : False
    Extensions : {System.Security.Cryptography.Oid, System.Security.Cryptography.Oid, System.Security.Cryptograph
    y.Oid, System.Security.Cryptography.Oid...}
    FriendlyName : trapoist.com
    IssuerName : System.Security.Cryptography.X509Certificates.X500DistinguishedName
    NotAfter : 8/9/2015 4:06:40 PM (SE VENCERA EL 8 DE SEPTIEMBRE)
    NotBefore : 8/5/2014 7:39:01 PM
    HasPrivateKey : True
    PrivateKey : System.Security.Cryptography.RSACryptoServiceProvider
    PublicKey : System.Security.Cryptography.X509Certificates.PublicKey
    RawData : {48, 130, 5, 128...}
    SerialNumber : 27B309845C2696
    SubjectName : System.Security.Cryptography.X509Certificates.X500DistinguishedName
    SignatureAlgorithm : System.Security.Cryptography.Oid
    Thumbprint : 084B2597D626C5361CF8002FADBEA83B9144143D
    Version : 3
    Handle : 485017248
    Issuer : CN=Go Daddy Secure Certificate Authority - G2, OU=http://certs.godaddy.com/repository/, O="GoDad
    dy.com, Inc.", L=Scottsdale, S=Arizona, C=US
    Subject : CN=trapoist.com, OU=Domain Control Validated
    AccessRules : {System.Security.AccessControl.CryptoKeyAccessRule, System.Security.AccessControl.CryptoKeyAcces
    sRule, System.Security.AccessControl.CryptoKeyAccessRule}
    CertificateDomains : {trapoist.com, www.trapoist.com, autodiscover.trapoist.com, mail.trapoist.com...}
    CertificateRequest :
    IisServices : {}
    IsSelfSigned : False
    KeyIdentifier : 54B2B188FA07098417B50DF52BDC0A41E44C9234
    RootCAType : ThirdParty
    Services : IMAP, POP, SMTP
    Status : DateInvalid
    SubjectKeyIdentifier : 54B2B188FA07098417B50DF52BDC0A41E44C9234
    PrivateKeyExportable : True
    PublicKeySize : 2048
    ServicesStringForm : IP..S.
    Archived : False
    Extensions : {System.Security.Cryptography.Oid, System.Security.Cryptography.Oid, System.Security.Cryptograph
    y.Oid, System.Security.Cryptography.Oid...}
    FriendlyName : trapoist.com
    IssuerName : System.Security.Cryptography.X509Certificates.X500DistinguishedName
    NotAfter : 8/9/2014 4:06:40 PM
    NotBefore : 8/12/2013 2:29:54 PM
    HasPrivateKey : True
    PrivateKey : System.Security.Cryptography.RSACryptoServiceProvider
    PublicKey : System.Security.Cryptography.X509Certificates.PublicKey
    RawData : {48, 130, 5, 161...}
    SerialNumber : 042D71441FC05E
    SubjectName : System.Security.Cryptography.X509Certificates.X500DistinguishedName
    SignatureAlgorithm : System.Security.Cryptography.Oid
    Thumbprint : 76C7987A7A9C7F9917A6A1B208220CA768CE0D23
    Version : 3
    Handle : 485016480
    Issuer : SERIALNUMBER=07969287, CN=Go Daddy Secure Certification Authority, OU=http://certificates.godadd
    y.com/repository, O="GoDaddy.com, Inc.", L=Scottsdale, S=Arizona, C=US
    Subject : CN=trapoist.com, OU=Domain Control Validated
    Renew the expired selfsigned certificate
    PS C:\Users\Administrator> Get-ExchangeCertificate -Thumbprint '76C7987A7A9C7F9917A6A1B208220CA768CE0D23' | New-ExchangeCertificate
     Confirm
    Overwrite the existing default SMTP certificate?
     Current certificate: '76C7987A7A9C7F9917A6A1B208220CA768CE0D23' (expires 8/9/2014 4:06:40 PM)
    Replace it with certificate: 'C3FBFA049FE6AC1806B950EB7A7AF8286EE04880' (expires 4/13/2020 12:56:34 PM)
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"): Y
     Thumbprint                               
    Services   Subject
    C3FBFA049FE6AC1806B950EB7A7AF8286EE04880  IP..S.     OU=Domain Control Validated, CN=trapoist.com
    PS C:\Users\Administrator> Get-ExchangeCertificate
    Thumbprint                                Services   Subject
    C3FBFA049FE6AC1806B950EB7A7AF8286EE04880  IP..S.     OU=Domain Control Validated, CN=trapoist.com
    084B2597D626C5361CF8002FADBEA83B9144143D  IP.WS.     CN=trapoist.com, OU=Domain Control Validated
    76C7987A7A9C7F9917A6A1B208220CA768CE0D23  IP..S.     CN=trapoist.com, OU=Domain Control Validated
    #DELETE THE OLD CERTIFICATE (EXPIRED)
    PS C:\Users\Administrator> Remove-ExchangeCertificate -Thumbprint 76C7987A7A9C7F9917A6A1B208220CA768CE0D23
    Confirm
    Are you sure you want to perform this action?
    Remove certificate with thumbprint 76C7987A7A9C7F9917A6A1B208220CA768CE0D23 from the computer's certificate store?
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"): Y
    PS C:\Users\Administrator> Get-ExchangeCertificate
    Thumbprint                                Services   Subject
    C3FBFA049FE6AC1806B950EB7A7AF8286EE04880  IP..S.     OU=Domain Control Validated, CN=trapoist.com
    084B2597D626C5361CF8002FADBEA83B9144143D  IP.WS.     CN=trapoist.com, OU=Domain Control Validated
    #CALLING CMD TO RESET THE IIS.
    PS C:\Users\Administrator> cmd
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    #RESET EL IIS
    C:\Users\Administrator>iisreset
    Attempting stop...
    Internet services successfully stopped
    Attempting start...
    Internet services successfully restarted
    Done

  • Exchange server 2013 ECP, OWA, Exchange Management Shell, Outlook access and a few more problems.

    Good Morning,
    I really need some help please.
    Our Server 2012 std. with Exchange 2013 std. installation was running like a dream. The tech responsible for our installation left the company to work in the UK and reported to us that there were minor issues with the installation that
    needed attention.
    on investigation we have found issues in that we cannot access ECP or OWA and in fact Internet explorer most of the time. on further investigation we found management shell for exchange gives errors on start up and new users and outlook cannot
    be added to the domain.
    On contacting the tech via phone he said he had issues with Certificates but could not help any further.
    I have googled the problems and read much in TechNet and believe that in order not to make things worse than they are to approach those that know more than I do at present. I am not sure where to start right now.
    Where do I start?????
    ps. There does not seem to be any backups that we can fall back on.
    regards  Tom

    Hi Winnie,
    Please check me on this. Authentication seems to be incorrectly configured.
    Attached below is the output from the commands you requested me to run.
    ecp
    Identity                      : NORTH2012-SERV\ecp (Exchange Back End)
    InternalAuthenticationMethods : {Ntlm, WindowsIntegrated}
    BasicAuthentication           : False
    WindowsAuthentication         : True
    DigestAuthentication          : False
    FormsAuthentication           : False
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    Identity                      : NORTH2012-SERV\ecp (Default Web Site)
    InternalAuthenticationMethods : {Basic, Fba}
    BasicAuthentication           : True
    WindowsAuthentication         : False
    DigestAuthentication          : False
    FormsAuthentication           : True
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    OWA
    Identity                      : NORTH2012-SERV\owa (Exchange Back End)
    InternalAuthenticationMethods : {Ntlm, WindowsIntegrated}
    BasicAuthentication           : False
    WindowsAuthentication         : True
    DigestAuthentication          : False
    FormsAuthentication           : False
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    Identity                      : NORTH2012-SERV\owa (Default Web Site)
    InternalAuthenticationMethods : {Basic, Fba}
    BasicAuthentication           : True
    WindowsAuthentication         : False
    DigestAuthentication          : False
    FormsAuthentication           : True
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Fba}
    regards
    Tom

  • Exchange 2007 Management shell issue: "There are multiple objects matching the identity "servername" Please specify a unique value"

    I thought this would be an easy answer to an issue I'm facing, but there's a problem executing the solution.
    I'm running Exchange 2007 in a clustered SCC configuration.  The clustered resource is called "DENBURYMAIL."  I want to give my account full mailbox access rights to all the mailboxes in this resource/database.
    I believe I found the solution to this at
    http://technet.microsoft.com/en-us/library/bb310792%28EXCHG.80%29.aspx (about halfway down the page) the instructions read as follows: 
    ==============================
     Q: I have a third-party messaging application that requires full access to each user's mailbox. With Exchange Server 5.5, we grant a special account the Service Account Admin permissions, and then tell the application to use this account. How
    can I achieve similar functionality in Exchange 2007?
    A: Exchange 2007 security works differently from that of Exchange Server 5.5. In fact, Exchange 2007 does not use a site service account. Instead, all services start as the local computer account.
    If your logon account is the Administrator account, a member of the root Domain Administrators, a member of the Enterprise Administrators groups, or a member of the Exchange Organization Administrators role, you are explicitly denied access to all mailboxes
    that are not your mailbox, even if you have full administrative rights over the Exchange system. All Exchange 2007 administrative tasks can be performed without having to grant an administrator sufficient rights to read other people's mail.
    You can achieve the results that you want in the following ways, but do so only in accordance with your organization's security and privacy policies:
    In the Exchange Management Shell, use the following command to allow access to all mailboxes on a given mailbox store:
    Add-ADPermission -identity "mailbox database" -user "serviceaccount" -ExtendedRights Receive-As
    =============================
    But when I run the command (Add-ADPermission -identity "denburymail" -user "matthew.fazio" -ExtendedRights Receive-As) I get an error telling me that "There are multiple objects matching the identity "DENBURYMAIL."  Please Specify a unique value."
    I'm not sure what's causing this-- why are there "multiple objects?"  Is this a problem due to operating in a clustered environment?
    Any assistance would be appreciated!

    It may not be specific enough for the command to understand you.
    Try this:
    Get-MailboxDatabase -Server <servername> | Add-ADPermission -user "matthew.fazio" -ExtendedRights Receive-As

  • Exchange 2013 management shell error

    The problem am facing is that when I opened the Exchange management shell on my  Exchange 2013  server locally it would fail to connect.The following error is receiving with Administrator account.I add another account in Organization
    Management Permission  it connect successfully.
    following is error
    Failed to connect to an Exchange server in the current site.
    Enter the server FQDN where you want to connect.: mail.abc.com
    VERBOSE: Connecting to mail.*.*.
    New-PSSession : [mail.abc.com] Connecting to remote server mail.abc.com failed with the following error message :
    WinRM cannot process the request. The following error occurred while using Kerberos authentication: Cannot find the
    computer mail.abc.com. Verify that the computer exists on the network and that the name provided is spelled
    correctly. For more information, see the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : NetworkPathNotFound,PSSessionOpenFailed
    [PS] C:\Windows\system32>

    Hi wert
    Thank you for your question.
    We could run Set U to make sure the logon user is domain administrator, because we use another account logon without any problems. We could check if some permissions are missing for administrator.
    We could refer to the following steps to delete administrator profile to check if the issue persist:
    Open up "Control Panel | System and Security | System"
    In the dialog click on "Advanced system settings" (requires Admin rights)
    The "System Properties" dialog will be displayed
    Make sure you are in the "Advanced" register
    In the "User Profiles" section click on "Settings"
    The "User Profiles" dialog is displayed
    Select administrator account and Delete it.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Unable to connect to local Exchange 2013 server when opening Exchange Management shell

    Hi Everyone
    Yesterday evenything was working fine, and then this morning, I`m unable to establish a connection with the Exchange shell. I receive the following errors. Any help is appreciated.
             Welcome to the Exchange Management Shell!
    Full list of cmdlets: Get-Command
    Only Exchange cmdlets: Get-ExCommand
    Cmdlets that match a specific string: Help *<string>*
    Get general help: Help
    Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
    Show quick reference guide: QuickRef
    Exchange team blog: Get-ExBlog
    Show full output for a command: <command> | Format-List
    Tip of the day #55:
    Want to view the mounted status of all mailbox databases? Type:
     Get-MailboxDatabase -Status | Format-Table Name, Server, Mounted
    VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
    New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
    message : The client cannot connect to the destination specified in the request. Verify that the service on the
    destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
    running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
    command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
    the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
    VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
    New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
    message : The client cannot connect to the destination specified in the request. Verify that the service on the
    destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
    running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
    command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
    the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
    VERBOSE: Connecting to C-EXCH01.BLCLAB.CA.
    New-PSSession : [c-exch01.blclab.ca] Connecting to remote server c-exch01.blclab.ca failed with the following error
    message : The client cannot connect to the destination specified in the request. Verify that the service on the
    destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
    running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
    command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
    the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
    VERBOSE: Connecting to C-EXCH02.BLCLAB.CA.
    New-PSSession : [c-exch02.blclab.ca] Connecting to remote server c-exch02.blclab.ca failed with the following error
    message : The client cannot connect to the destination specified in the request. Verify that the service on the
    destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
    running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
    command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
    the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
    VERBOSE: Connecting to C-EXCH01.BLCLAB.CA.
    New-PSSession : [c-exch01.blclab.ca] Connecting to remote server c-exch01.blclab.ca failed with the following error
    message : The client cannot connect to the destination specified in the request. Verify that the service on the
    destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service
    running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following
    command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see
    the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
    Failed to connect to an Exchange server in the current site.
    Enter the server FQDN where you want to connect.:
    VERBOSE: Connecting to .
    New-PSSession : Cannot bind parameter 'ConnectionUri'. Cannot convert value
    "http:///powershell?serializationLevel=Full;ExchClientVer=15.0.516.32;clientApplication=ManagementShell;TargetServer="
    to type "System.Uri". Error: "Invalid URI: The hostname could not be parsed."
    At line:1 char:30
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    +                              ~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidArgument: (:) [New-PSSession], ParameterBindingException
        + FullyQualifiedErrorId : CannotConvertArgumentNoMessage,Microsoft.PowerShell.Commands.NewPSSessionCommand
    [PS] C:\Windows\system32>
    Ernie Prescott
    Updated information.
    I can succussfully connect to the exchange powershell from a remote computer, using this method.
    $Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri
    http://<FQDN of Exchange 2013 Client Access server>/PowerShell/ -Authentication Kerberos
    Import-PSSession $Session
    So the problem is localised on the server.
    Regards

    Hi
    Try the steps for Error 1 on this link
    http://www.petenetlive.com/KB/Article/0000477.htm
    Hope it will help
    Cheers
    If you have any feedback on our support, please click
    here
    Zi Feng
    TechNet Community Support

  • Exchange Management Shell (Exch 2010) - Error when opening

    Hi,
    Ive an Exchange 2010 SP3 server which wont open Exchange Management Shell. When opening it, I get the following:
    The term 'ImportPSSession' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
     the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At C:\Program Files\Microsoft\Exchange Server\V14\bin\connectfunctions.ps1:64 char:18
    +         ImportPSSession <<<<  -ClearCache:$false
        + CategoryInfo          : ObjectNotFound: (ImportPSSession:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    The only difference I can see between this and another server which works is get-modules shows the output below on the one that works but the one that fails doesnt show anything. (This could be a symptom though rather than the cause.)
    ModuleType Name                                  ExportedCommands
    Script          <ServerNameReplaced>...   {Get-IRMConfiguration, New-MailUser, Enable-CmdletExtensionAgent, New-Ac...
    Ive tried copying over the files in this article, but it didnt work:
    http://blogs.technet.com/b/nawar/archive/2010/09/03/exchange-management-shell-ems-missing-after-applying-exchange-2010-sp1.aspx
    Any help appreciated!?
    Thanks
    Stephen

    Because that article has files from Exchange 2010 SP1 and you are running SP3.
    If you have another server you can copy the file from that server to affected server
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Maybe you are looking for

  • How do I determine what version of CUPS I have?

    I have been using Gimp-Print and am now upgrading to Gutenprint which requires cups 1.1.15 or newer. How do I find out which I have? I am running 10.2.8. G4 mirrordoor   Mac OS X (10.2.x)   epson stylus photo 1280

  • Why does excel, word and mail open when I turn on my Mac?

    When I start my Mac Pro, excel, word and mail open.  Can this be stopped?

  • Cannot update or re-install E66

    When I use NSU to update a Nokia E66, it tells me that I already have the latest software and the I cannot re-install the same software. I have done this (re-install) many times before on different Nokia E71. Regards

  • How to transport View ID?

    Hello all, I have few queries in SAP BW development system and I have a requirement such that a view needs to be created and saved for each of them using RSRT transaction. Can anyone let me know if there is a way to put these views in transport reque

  • Chunked header line gets removed

    Some webserver at akamai (for instance: www.fedex.com ) delivers the data chunked. A snoop trace indicated that the server sends a header line "Transfer-Encoding: chunked". The proxy (3.6 SP6 on Solaris) removes this header as it sends it to the clie